Search results: longshot

Sort order

117 models

P
PrintablesRedCowl

Xshot Longshot Barrel Collet V2

V2, and a much needed upgrade of the original barrel collet system I made for the Xshot Longshot, using the same internal barrel collet as the Unicorn Wings Kit that can be found here: LINK . This still has the version of the collet that…

Downloads
1,220
Likes
118
Rating
4.88
P
PrintablesRedCowl

Xshot Longshot Half Dart Magwells

To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…

Downloads
843
Likes
137
Rating
4.91
P
PrintablesRedCowl

Xshot Longshot (XLS) Shotgrip Pump Grip

Both parts are designed to be printed with no supports, Use a 4-40 x 3/8in screw in the front if the picc lock isn't staying in place. You will need to prime the blaster before installing. Don't have a printer? Order from OOD! Affiliate…

Downloads
719
Likes
58
Rating
4.67
P
PrintablesaceofSPACE

X-Shot Longshot angled Foregrip

The grip is printed in two parts and clamps around the rail on the Longshot like the original grip. Printed without supports. Hardware: 3x M3x8 socket head screws

Downloads
697
Likes
76
Rating
4.5
P
Printablesmr3yna

Xshot Longshot SCAR

This is a scar for the Xshot Longshot blaster. The stock scar was non functional. 6/20/23 Working on updated version ** added new V2 improved rifling and less FPS drop ** 6/27/23 Adding Version for 16mm replacement barrels *** added V3…

Downloads
607
Likes
53
Rating
5
P
PrintablesBrooklyn Tony

X-Shot Longshot HELIX O-Ring Front End

Utilizing the groundwork laid by RedCowl and is V2 Barrel Collet front end and the o-ring collet system that SillyButts designed, I created this: a stylized front end for the X-Shot Longshot (or Lonxshot, Longxshot, etc.) that allows the…

Downloads
570
Likes
89
Rating
5
P
PrintablesKyle Bernard

LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…

Downloads
560
Likes
72
Rating
4.88
P
PrintablesRedCowl

Xshot Longshot Side Picatinny Rails

This design is meant to be a press fit into the trapezoidal cutouts in the rails of the Xshot Longshot. This uses 2x toy screws (the normal screws that Nerf, Dartzone, and Xshot use to keep their blasters together). There are a ton of…

Downloads
503
Likes
74
Rating
4.83

X-Shot Longshot Cheek Rest

Cheek rest for your Longshot, as the stock cheek weld is terrible. Acts as a stock block too. Print both pieces, open Longshot stock to furthest position, put pieces in, secure with three toy screws- standard Nerf style. Mirror for lefties.

Downloads
499
Likes
98
Rating
5
P
PrintablesJwidess

X-Shot Longshot - Plunger Tube Replacement

Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…

Downloads
456
Likes
58
Rating
4.86
P
PrintablesCorvus

Xshot BCAR Shroud + Barrel Color Sleeve _ MPP _ X-Shot Motorized Piston Pump _ (or LONGSHOT 2.0)

Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…

Downloads
432
Likes
104
Rating
5
P
PrintableswindX

Xshot Longshot Spring Spacer

Spring spacer for the XLS. Adds ~10mm of precompression 7.5mm, 12.5mm and 15mm sizes also available. Slight edge on the outer end to help the spring stay aligned. Highly recommend you print this in 100% infill for durability reasons. Not…

Downloads
409
Likes
48
Rating
5
P
PrintablesNIGHTHUNTER79

X-Shot Longshot Magwell Internals

For those who want to print RedCowls fantastic xshot-longshot-half-dart-magwells but don't want to sacrifice the original magwell internals. Simply print the slide and two of the locks, put in a spring (I took a spring of a broken pen and…

Downloads
404
Likes
52
Rating
4.43
P
PrintablesaceofSPACE

Picatinny riser for X-Shot Longshot

A riser matching the profile of the Longshot. Brining the picatinny rail to the right height for an optic

Downloads
404
Likes
67
Rating
0
P
PrintablesChance

Boom Grip - X-Shot Longshot (Lonxshot / XSL)

My Boom grip, now remixed for the X-Shot Longshot. New this iteration: knurling. Neat. Uses one M5 bolt (either 30 or 35mm I think) and one M5 nut. Designed to be printed with the front end up - it'll bridge over the picatinny's end, no…

Downloads
381
Likes
46
Rating
5
P
PrintablesValTek Armory

X-Shot Longshot Extended Barrel Front End - O-Ring Collet

remixed for better retention with a 016 o-ring

Downloads
362
Likes
53
Rating
4.5
P
PrintablesJezzaWalker

LEGO-Compatible Nerf Longshot

A LEGO accessory based on the Nerf Longshot. Updated version with some tweaks to make the two halves look more like one complete blaster. This started as a post on r/nerf asking which blaster I should model next. I got dozens of…

Downloads
283
Likes
74
Rating
5
P
PrintablesRedCowl

Xshot Longshot Shorty PCAR

Press fit PCAR for Xshot Longshot, using Thanhtacles 's trivicus 1.0. It fits the lines of the blaster well.

Downloads
281
Likes
44
Rating
5
P
PrintablesFIB

X-Shot Longshot Extended Barrel Front End

Want to add a longer barrel to your X-Shot Longshot ? Want the barrel held in place securely with a nylon thumbscrew such as used in the Lynx or SLAB? This is what you need! We have included a version for M3 and M4 thumbscrews/nuts so you…

Downloads
276
Likes
53
Rating
0
P
PrintablesaceofSPACE

X-Shot Longshot low profile magazine-release

A very low profile magazine release for use with the short-dart adapter. I don't recommend it for regular use with normal magazines as it is too difficult to operate quickly The spring post can be reinforced with a small screw if needed.

Downloads
270
Likes
53
Rating
5
P
PrintablesNitrEX4

X-Shot Longshot FAMAS Carrying Handle with 2 degrees Picatinny

Update April 2024 - I suggest printing the carry handle in two parts, dovetailing it at the picatinny rail. This allows you to print it side down, costing less support material and also getting a more optimal print orientation for…

Downloads
247
Likes
43
Rating
0
P
Printablestcatca

Longshot billiards bridge - Snooker, 8 pool or American

As it was too expansive and not able to deliver to france, I create my own billards longshot bridge. Of course if you are living in the country where it is sold, please buy the real version. This is a little bit customizable, meaning the…

Downloads
228
Likes
33
Rating
5
P
PrintablesASHPrintingYT

X-Shot Longshot SCI-FI Barrel

This is a Longer version of @BrooklynTony198's X-Shot Longshot Barrel. It gives your Longshot more of a sci-fi look and I personally love it! In the pictures the barrel has a slight crack which I've fixed in the file so hopefully your…

Downloads
216
Likes
26
Rating
5
P
Printablesdonutcat

Xshot Longshot Barrel Collet V2 - Fixed Chamfer

Added a chamfer that was missing because it bothered me, that's it

Downloads
187
Likes
17
Rating
5
P
PrintablesCailess Arouræ

X-Shot Longshot Pusher

UPDATED FILES Did you let a coworker try out your Longshot, and did he subsequently break the pusher while somehow full sending a double feed so bad it required a full disassembly of your blaster? Cause I did, and thats why I designed…

Downloads
186
Likes
36
Rating
5
P
PrintablesBeneto

LSG (Longshot Shotty Grip)

A grip designed for the XLS. Comes in a long and short version. The long version will come up to the trigger guard on prime and the short one will come up about an inch before the guard. When you print it use supports for the hand stop in…

Downloads
184
Likes
24
Rating
0
P
PrintablesSomeDingus

X-Shot Longshot Trivictus SCAR

Wanted to slow down the FPS for use in a low-speed game. Tested different lengths to see how it affected speed. With Adventure Force and Dart Zone short darts, the 60mm and 100 mm resulted in about a 10 FPS drop. The other length of SCAR…

Downloads
182
Likes
45
Rating
5
P
PrintablesRedCowl

Xshot Longshot Barrel Swap Collet (V1, OBS)

PLEASE USE THE V2 - IT IS SO MUCH BETTER: Can be found here: LINK This is a drop in replacement for the front end of the X-Shot Longshot's front end. There are many parts included, as there are many ways to use this mod. First, you will…

Downloads
180
Likes
27
Rating
0
P
PrintablesBrooklyn Tony

X-Shot Longshot Magwell Hardstop Strengthener for RedCowl's Magwells

MAGWELLS FOUND HERE: https://www.printables.com/model/512021-xshot-longshot-half-dart-magwells I apparently LARPed too hard when reloading my Lonxshot with RedCowl's more flush magwell installed, and managed to shear off both hard-stops…

Downloads
175
Likes
30
Rating
5
P
PrintablesCorvus

REINFORCED X-Shot Longshot Extended Barrel Front End (O-ring + threaded fixation)

Reinforced this nice frontend for the X-Shot Longshot because mine unfortately broke at the thread. It could be because of the crappy filament I used or all the silicone grease that has accumulated there at the front^^ I reinforced it in…

Downloads
170
Likes
29
Rating
5
P
PrintablesJambatic

X-Shot Longshot Pusher Reinforcement

Simple yet highly effective! This reinforcement prevents your X-Shot Longshot Pusher from breaking. Did your pusher already snap? Print, push, glue, and you're back in action. If it's still intact, print and install this reinforcement for…

Downloads
165
Likes
28
Rating
0
P
PrintablesLayer Forge

X-Shot Longshot (XLS) Ram

X-Shot Longshot – Aluminum Bar Dart Pusher This is a reinforced dart pusher designed specifically for the X-Shot Longshot. Unlike the stock plastic pusher, this design uses a solid aluminum bar joined with 3D printed end pieces to…

Downloads
149
Likes
24
Rating
5

ZURU xshot longshot replacement pins

Improved model, for easier printability, supports are recommended. The short one is the top pin and the long one is the bottom one.

Downloads
149
Likes
25
Rating
0
P
PrintablesVictor Shui

Silly shell adapter for Xshot longshot Barrel Collet

This allows you to shoot silly shells using your longshot. MAKE SURE YOUR LONGSHOT HAS A STRONG SPRING. The stock spring will work, but not very good at all. You will also have to download the lever and the piece that you screw the silly…

Downloads
146
Likes
35
Rating
4.67
P
PrintablesShanEngineering

Zuru XShot Longshot 1" Rail Riser

11" long Picatinny rail lifted 1" from the stock XLS rail. Designed as 5 separate pieces, with the supports each being a separate piece, the rail split into two pieces for ease of print, and a printed pin to index the front with the XLS…

Downloads
133
Likes
28
Rating
0
P
PrintablesTrevor

X-Shot Longshot Talon Magazine Adapter One Piece

This is a one piece magazine Talon magazine adapter for the X-Shot Longshot. It is intended to be a permanent install. The magazine retention is achieved with a pair of 6x7mm ball detents. This is loosely modeled after the piece that is…

Downloads
131
Likes
25
Rating
5
P

xshot longshot turnaround

When I replaced my x-shot longshot plunger tube the turnaround was brittle and cracked, this will replace that turnaround, use the original barrel o-ring. It need a little bit of support when printing. I printed it at 0.2mm, 2 walls, 15%…

Downloads
129
Likes
32
Rating
4
P
PrintablesLayer Forge

X-Shot Longshot (XLS) Talon Mag Adaptor

This is a magwell adapter designed for the X-Shot Longshot, allowing it to accept Worker Talon short dart magazines . Key Features Compatible with the original short dart mag release lever. Includes an integrated, printed mag release…

Downloads
121
Likes
26
Rating
5
P
PrintablesCailess Arouræ

X-Shot Longshot Modified Short Dart Mag Release with Knurled Knob

This remix includes 3 main changes: The knob is now a knurled round knob that takes an M3x25 socket head screw, and should be printed at 0.1mm layer heights or lower in order to resolve the knurls. The knob includes sacrificial bridging…

Downloads
115
Likes
28
Rating
4.5
P
PrintablesCailess Arouræ

X-Shot Longshot Low Profile Magazine Release

This is my take on Sternendrache2's design. I did not modify his model, and instead designed my own from the ground up to more closely match the manufacturers original parts geometry. Due to this model performing the exact same function…

Downloads
114
Likes
19
Rating
5
P
PrintablesMiata Head

X-shot Longshot sight pins

Pins for stock sights so you don't lose them. Friction fit them into the hole in the front of each sight. Printing tips: Max cooling, 100% infill, print multiple at a time with some distance to maximize cooling if your prints aren't…

Downloads
113
Likes
14
Rating
1
P
PrintablesHL

Xshot Longshot Half Dart Magwells - M3 Heatset Inserts

Heatset inserts (M3 thread, 4mm length, 4.5mm outer diameter, 3.9mm nub)https://www.aliexpress.us/item/3256805034317562.html M3x10mm button head screw See original model for printing instructions. You probably want extra walls so there's…

Downloads
111
Likes
23
Rating
5
P
PrintablesJambatic

X-Shot Longshot "Long boiii" Side Picatinny Rail

I custom-built these lower-profile, larger side rails , inspired by RedCowl's Side Picatinny design. My goal was to mount accessories on the side rails without interfering with attachments on the main rail. You can customize your rail…

Downloads
109
Likes
34
Rating
5
P
PrintablesNarddDawgg

X-Shot Longshot Short Dart Mag Release

I printed the slide with the two “legs” that straddle the plunger tube on the build plate, this uses a bunch of support material, but should be the strongest. The knob should be printed on its side, requiring support on the part that goes…

Downloads
107
Likes
20
Rating
0
P
PrintablesNitrEX4

X-Shot Longshot FAMAS Carry Handle V2

After improving the internals of my XSLS, I took a look at my old carry handle and wanted to make some improvements. Lowered the carry handle significantly so you can now use a sight. Still, lower profile the sight, the better. More…

Downloads
105
Likes
38
Rating
5
P
PrintablesPteppic

Nerf Longshot Muzzle Brake

This is a barrel shroud and muzzle brake for a Nerf blaster, specifically the Longshot main gun. The shroud is designed to fit around a 318mm long, 16mm OD barrel (worker longshot kit) and inside the front locking lug of the blaster. The…

Downloads
103
Likes
27
Rating
0
P
Printablesalbird

Xshot Longshot RIPPCAR

RIPPCAR with bigger OD to fit into the Xshot longshot

Downloads
94
Likes
13
Rating
0
P
PrintablesJambatic

Ultimate X-Shot Longshot Front End

Level up your X-Shot Longshot with this all-in-one front end designed for both performance and aesthetics. Tired of simple, flimsy, or ill-fitting designs? This isn't a remix—it's a complete redesign built from the ground up, blending the…

Downloads
89
Likes
20
Rating
0
P
PrintablesRedCowl

Xshot Longshot 2.0 Collet Frontend

To install, unscrew the two screws that are in the pins - Remove the pins - Then pull the stock front end out. Then put the new one in, then put the pins in. Print it flat, like the others. No supports needed

Downloads
84
Likes
20
Rating
5
P
PrintablesNarddDawgg

X-Shot Longshot Trigger Safety Delete

A pretty basic part that blanks out the trigger safety on the X-Shot Pro Longshot. Installation requires some type of adhesive (I used hot glue) to retain these in place. Other than that, this should be a pretty simple install.

Downloads
81
Likes
10
Rating
5
P
Printablesgoblinhours

X-Shot Longshot FAMAS style Handle/Riser

I got the degenerate version of the Longshot recently and have been meaning to turn it into a FAMAS ever since. There's some perfectly fine, well designed handles out there already but I wanted the practice and it ended up only taking an…

Downloads
79
Likes
27
Rating
5
P
PrintablesShanEngineering

X Shot Longshot "Talus" Dual Mag Holder

Run out of mag pouches but still need to carry more mags? The Talus provides two quick access mags held securely on the sides of the blaster. Designed for right hand users, the asymmetrical mag releases allow for intuitive thumb pulls of…

Downloads
78
Likes
32
Rating
0
P
PrintablesNarddDawgg

X-Shot Longshot Full-dart Mag Release

Should be a straightforward print, lay the largest flat side down on your print bed, I set mine for 5 walls, 5 top and 5 bottom layers, which is pretty overkill. The hole on the top peg is sized to be tapped to M3, I used a screw and…

Downloads
76
Likes
10
Rating
0
P
PrintablesSQU1DGY

Longshot cheek rest for jam door

This is a modified cheek rest that allows for the jam door to be opened. This design only includes a modified right side cheek rest due to the jam door not being covered on the left cheek rest.

Downloads
72
Likes
9
Rating
0
P
Printablesnammybd.

XShot Longshot BCAR/WCAR/DCAR

Made to work perfectly with a stock XShot Longshot. I extended the mounting area to 19 mm to get rid of the empty space that can hinder performance. I also added a screw hole on the side of the mount and expanded it to be able to screw it…

Downloads
71
Likes
8
Rating
0

Xshot Longshot - Threaded turnaround

Drop in replacement for the Xshot longshot turnaround with a threaded barrel insert to suit worker style barrels. M16 x 1.0 ↓12mm Print upright with the mag end of the turnaround on the print bed. Supports required. O-ring may be tight…

Downloads
64
Likes
13
Rating
5
P
PrintablesFinches Foam

XShot Longshot O-Ring Barrel Collet

This is a quick remix I threw together to allow me and my girlfriend to change barrels interchangeably between our Fury-X and and Longshots, I find the O-Ring system alot nicer to use than a fixed collet as it is alot more convenient. My…

Downloads
63
Likes
9
Rating
5
P
PrintablesGemeneye

Nerf Longshot Inspired Scope - No Hardware

Hello everyone! This is a toy scope that I designed to closely resemble the Nerf Longshot scope. I love the look of the Longshot scope, and I thought it would be fun to be able to print one in whatever colors I wanted. Additionally, once…

Downloads
63
Likes
39
Rating
5
P
PrintablesSwagineer

XShot Pro Longshot Thumb-Mag Release Arm

The stock half-dart magazine release lever on my XShot Pro Longshot seemed a bit small for my thumb, so I made a customizable version of the arm that uses M3 screws for fastening (without the need for heat inserts). It should fit into the…

Downloads
63
Likes
11
Rating
5
P
PrintablesShanEngineering

XShot Longshot Jam Resistant Pusher

This replacement pusher design aims to mitigate several jamming scenarios with the stock pusher on the XLS which may be caused by stacking tolerances, including: Darts getting stuck in the pusher ring Darts getting pulled backwards on…

Downloads
60
Likes
9
Rating
0
P
PrintablesFaceHaver

Longshot Bolt Handle replacement-uses original bar

Replacement part for a old Nerf blaster toy. The original bolt handle came off due to the insides breaking (should look like this but the part that contacts the metal was broken off entirely). I wanted to replace the just broken part. I…

Downloads
60
Likes
6
Rating
0
P
PrintablesJTK

3d parts collection for x-shot longshot.

Here is some parts for your longshot. They are meant for if your gun breaks you can fix it. No need to thank. (:

Downloads
58
Likes
10
Rating
0
P
PrintablesSamuel Hunt

Enhanced Xshot Longshot Barrel

I added a Picatinny rail. I am planning an attachment line designed just for this

Downloads
53
Likes
6
Rating
0
P
PrintablesSWBluePrints

XShot Longshot Angled Grip

An angled grip for the XShot Longshot with a notch for the index finger to help prime stronger springs. Works on both 1.0 version and 2.0 version. The plastic roller from the original handle is reused (not mandatory, but helps against…

Downloads
52
Likes
5
Rating
0
P
Printables3dmints

longshot pro sights

these are simple sights that dont need any hardware but you can use 3mm screws if you want. everything is a very tight fit but its soposed to be. the front sight post should be pushed all the way in and the rear sight post should match…

Downloads
52
Likes
6
Rating
0
P
PrintablesExnihilo Prints

Ocarina Hookshot/Longshot low material combo

Hey guys after some requests I reuploaded the hookshot and Longshot to use a lot less material, also includes an alternate style hook for those who want a closer to classic look. (I plan to release a full line up of classic and remaster…

Downloads
51
Likes
20
Rating
0
P
PrintablesCorvus

BCAR Shroud - X-Shot Longshot 2 (compatible with stock barrel, muzzle and BCAR) - XLS 2.0

BCAR Shroud -- X-Shot Longshot 2.0 (compatible with stock barrel, muzzle and BCAR) .... for a bit more color customisation on the blaster and to partially cover these unsightly high-gloss plastic parts. Shrouds for the X-Shot BCAR, to be…

Downloads
45
Likes
14
Rating
0
P
PrintablesCorbin May

Longshot spacer

This is a X-shot Longshot mod that will max out the spring compression.

Downloads
45
Likes
8
Rating
0
P
PrintablesJudahSher

X Shot Longshot Front Shell Pins

The heads of one of my pins broke off, so I reverse-engineered these so they match. They are the correct width, but I made them a little short so they had flat faces to print off of. The heads are the correct size.

Downloads
43
Likes
12
Rating
5
P
PrintablesHL

X-Shot Longshot angled Foregrip - Heatset Inserts

The hole is 3.7mm wide by 4.6mm deep. Make sure your inserts are about 1mm wider than the hole (so there's plastic to grip) and not as deep.

Downloads
43
Likes
8
Rating
0
P
PrintablesLazerfox86

X-Shot Longshot Blaster silly shell adapter

X-Shot Longshot Blaster silly shell adapter Directions For optimal results, consider printing with a variety of materials, although I highly recommend using PETG for its excellent durability and temperature resistance. Aim for a 35%…

Downloads
42
Likes
10
Rating
0
P
PrintablesSQU1DGY

QD sling mount for LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)

The same design as the original except this time there is a QD mount on the right side of the blaster's stock. Works super well if you run the sling of the front of the top rail, over the left shoulder and then under the right arm and…

Downloads
41
Likes
17
Rating
0
P
PrintablesCailess Arouræ

X-Shot Longshot Barrel Collet V2 SHORT

I very much liked RedCowls model, however there was not enough room at the end of my barrel to attach any muzzle devices. So I took the corrected champfer version of the model into blender and noticed internal geometry and other excess…

Downloads
41
Likes
4
Rating
0
P
PrintablesFranky Storms

Korolev KBR Longshot from The Cycle: Frontier

This is the Epic weapon, KBR Longshot, from the game The Cycle: Frontier. The Cycle: Frontier is a PvPvE first person shooter made by Yager Development. They had unfortunately announced that they will be shutting down the game as of…

Downloads
40
Likes
3
Rating
0
P
PrintablesBenjamin Cole

Zuru LongShot

Scanned Zuru Longshot Pro as a test piece. Scaled correctly. More models will come as I've scanned the inside and made upgrade parts.

Downloads
39
Likes
8
Rating
0

Nerf longshot pusher breech insert

The goal of this piece was to convert the stock longshot breech into a conventional pusher style breech with minimal modding effort. This is a work in progress, I'm currently in the process of adding additional orings and tweaking the…

Downloads
38
Likes
8
Rating
0
P
PrintablesFoamProArmory

Xshot Longshot Chunky Collet

Xshot Longshot Chunky Collet Much stronger than the original.

Downloads
36
Likes
10
Rating
0
P
PrintablesLazerfox86

X-Shot Longshot HELIX extended barrel collect mod

Print in place no supports 50% infill to make it strong at 0.2mm layers.

Downloads
34
Likes
8
Rating
0
P
PrintablesDinonerd9000

Barrel adapter for the X-shot Longshot SCAR

A barrel adapter for the X-shot Longshot SCAR that allows you to attach other barrels to it. This attachment will work with the X-shot longshot barrel as well as most Dart Zone barrel attachments. It will not work with attachments that…

Downloads
32
Likes
4
Rating
0
P
PrintablesVictor Shui

Cheek Rest for X-Shot Longshot Pro.

This is the X-Shot longshot Cheek rest by Kyle Bernard but with silly shell holders on the other side, because I somehow managed to make my longshot fire them.

Downloads
30
Likes
14
Rating
0

Nerf longshot replacement plunger head

Replacement plunger head for the longshot, to be used with 3.5mm o rings (I used 28mm ID). Ended up going with a o-ring seat that went from 28.4mm-29mm, found it gave a pretty good seal. I made this to experiment with seal strength, I'm…

Downloads
28
Likes
7
Rating
5
P
PrintablesPteppic

Nerf Longshot Disassembly Tray

Disassembly tray for the Nerf Longshot main gun. The shape of the tray somewhat resembles the gun outlines, the posts are roughly in the same spots as the screwholes. Smaller trays in the main body area for some (maybe even all) of the…

Downloads
27
Likes
9
Rating
0
P
PrintablesBreeki

Nerf Longshot Trigger Catch

This is a quick sketch of the Nerf Longshot catch. It is not optimized for strength but I did add fillets to the inner edges. If printed with 100% infill it should work for a good amount of shots with an 8kg spring. Print Settings Printer…

Downloads
27
Likes
5
Rating
0
P
PrintablesCharles Kidwell

LongShot TurnAround

A remix of the turnaround to allow room for the magazine.

Downloads
23
Likes
4
Rating
5

Xshot Longshot - Safety replacement (left handed)

Safety toggle for the Xshot longshot to suit lefties. Recessed patterns you can colour for visual feedback. (acrylic model paint used in the cover photo) Print with the flat side touching the build plate, Should be fine without supports.…

Downloads
22
Likes
8
Rating
4

Endcap covers for the Explorer pumpgrip designed for the Nerf longshot

Got a second-hand xplorer pump grip and I noticed that the bolt head and nut were wearing into the metal bars. Instead, I've designed covers that will protect the bars. An alternative would be plastic m4 washers, but that's a little more…

Downloads
22
Likes
0
Rating
0
P
PrintablesFaceHaver

Longshot Bolt Handle repair piece

Replacement part for a old Nerf blaster toy. The original bolt handle came off due to the insides breaking (should look like this but the part that contacts the metal was broken off entirely). I wanted to replace the just broken part. So…

Downloads
21
Likes
3
Rating
0
P
PrintablesManta Design

Xshot Longshot 2.0 Skeletonized Jam Doors

Update 10/26/26 : Breech load version added to the files. Models are print oriented and do not require support. No blaster disassembly or modification required. Filament Elegoo PLA Plus (Red)

Downloads
20
Likes
18
Rating
5
P
PrintablesZafC

Xshot Longshot Adjustable Integrated SCAR

The Xshot Longshot is horrendously overbarreled if you add a longer barrel without a 250+ fps spring. This fits an adjustable SCAR into the collet so the barrel can be kept to a minimum on sub 250fps setups while maintaining accuracy.…

Downloads
18
Likes
8
Rating
0
P
PrintablesRetroRanger

XShot Longshot 2.0 Basic Safety Delete

This is a basic and simplistic safety delete for the XShot Longshot 2.0. This requires no additional hardware Includes: Safety Delete Steps: Unscrew and open the blaster Remove the original safety (you may need to remove the trigger in…

Downloads
18
Likes
11
Rating
0

Longshot mag release curved remix plus filler

Remix of a remix of a longshot release lever. Remixed https://www.thingiverse.com/thing:4644887 (popatachi tweaked some dimensions) which is a remix of https://www.thingiverse.com/thing:2769539 (gargunkles' ambidextrous longshot mag…

Downloads
18
Likes
0
Rating
0

Rod seal longshot breech

https://www.reddit.com/r/Nerf/comments/q412iw/rod_seal_longshot_experimentation_details_in/ Longshot rod seal (instead of pusher piston seal) breech experiment pusher_01 was the one I used, that eventually snapped. pusher_02 and…

Downloads
18
Likes
0
Rating
0
P
Printablesin3rtia

Longshot from Ocarina of Time

Extended the barrel to fit an extra ring of chains. Also made a sleeve to serve as a background to the chains. The sleeve prints in vase mode. It is a tight fit but it has to be so that the chains still fit around the barrel. The…

Downloads
17
Likes
4
Rating
0
P
Printables79th Jedi

Nerf Longshot Jam Door

The Nerf Longshot jam door that nobody asked for, except me. Or you can say that I spent 2 hours googling for a longshot jam door stl and had no results, so I made it myself. have fun printing this! Print Settings Printer Brand: Creality…

Downloads
16
Likes
5
Rating
0
P

Rear Picatinny For XShot Longshot

Wanted a mag holder on the rear so i combined these two models

Downloads
15
Likes
7
Rating
0
P
PrintablesCailess Arouræ

X-Shot Longshot Alternative Stock Latch

If you do not like/want the stock to expand when pulled, and only expand when the lever is depressed, swap out the internal latch for this model. I did champfer one edge as a compatibility edit. There is a version without supports if you…

Downloads
14
Likes
4
Rating
5
P

XShot Longshot Front Grip

Front grips for the XShot Longshot. Requires M3mm screw. Large and small grips available.

Downloads
14
Likes
5
Rating
0

Longshot butt approximation

Used the Longshot stock by NIRODHA to find the butt sizing of the Longshot, so I could design a stock around it to replace the original one, namely a re-sized XZEUS stock. Then I realised that I'm actually pretty okay with the longshot…

Downloads
12
Likes
2
Rating
0
P
PrintablesLevi Tullis

Nerf Longshot CS-6 spring cap

A cap made for a Nerf Longshot CS-6 blaster. It is designed for the original spring that came with the blaster, and might not hold up if used with an aftermarket spring. Was printed in PLA, at 0.4 layer height. no supports necessary.

Downloads
11
Likes
3
Rating
0
P
PrintablesKats_Creatives

Nerf Longshot Barricade Muzzle

Have you ever wanted to put a Barricade muzzle in a Longshot? With these parts, it's now easier than ever! This is designed to print without added supports.

Downloads
10
Likes
5
Rating
0