BCAR Shroud - X-Shot Longshot 2 (compatible with stock barrel, muzzle and BCAR) - XLS 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BCAR Shroud for the X-Shot Longshot 2.0 (compatible with stock barrel, muzzle and BCAR)
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 43
- Makes
- 1
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BCAR Shroud -- X-Shot Longshot 2.0 (compatible with stock barrel, muzzle and BCAR)
.... for a bit more color customisation on the blaster and to partially cover these unsightly high-gloss plastic parts.
Shrouds for the X-Shot BCAR, to be used in combination with the stock barrel and muzzle of the X-Shot Longshot 2.0.
The shrouds are simply slid onto the BCAR and the muzzle.
--------------------------------------------------------------------------------------------------------------------
It needs approx. 26g of filament.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
3-4 walls
7 top and bottom shell layers
20% gyroid infill
NO supports needed
(Use a brim for the muzzle shroud if you’re having poor print bed adhesion.
If your slicer does not create a straight Z-seam, you should manually draw it for aesthetic reasons)