Search results: lp1

Sort order

152 models

P

KLP1 EXTRUDER COVER ''BLACK''

EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy

Downloads
106
Likes
10
Rating
5
P
PrintablesDET-Man

CAN 'n More - VORON 2.4 Connector Skirt (CNLINKO and EW LP12)

Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it! Why This Mod Exists…

Downloads
5,695
Likes
55
Rating
0
P
PrintablesSimone Spezzigu

Touch screen pen holder for Kingroon KLP1

Tired of having the damn pen wandering around the lab lost among the tools or stuck to some frame panel so that it makes a terrible noise when the printer vibrates? This is a simple and functional design of a pen holder for the touch…

Downloads
673
Likes
44
Rating
5
P
PrintablesJackerel

Kingroon KLP1 Shrouded Fan Duct

Basically a wider original duct with a vent attach to the back. It can just replace OEM part without modifying housing. Recommend to print at 0.15mm layer hight. Use only one screw to bolt on original spot. No Support Needed This desigh…

Downloads
553
Likes
42
Rating
4.25
P
PrintablesSimone Spezzigu

Improved spool holder for Kingroon KLP1

A new spool holder design which allows you to lower the filament spool mount point by 10cm ensuring correct sliding of the filament with less friction. This version has a wider hook so it is possible to insert reels of a wider thickness…

Downloads
515
Likes
39
Rating
4.75
P
PrintablesSimone Spezzigu

Riser upgrade for Kingroon KLP1

The work on the project is still in progress , for any doubts feel free to leave a comment or contact me on the Kingroon community group (user Glitch08). The goals are: -Modular design, easy to print without support and customizable. (you…

Downloads
474
Likes
68
Rating
5
P
PrintablesBilld

LCD Panel Controller Board Case - M.NT68676.2A board for LP156WH3(TL)(S1) LCD Panel

I had an old, slow laptop that had not been used for years. I repurposed the screen, using an external controller board, designed and printed a case for the controller board and ‘feet’ for the monitor brackets. The controller board is…

Downloads
416
Likes
31
Rating
4
P
PrintablesWolf3D

Kingroon KLP1 filament sensor mod

I do not own a Kingroon KLP1 by myself but a friend does. As he had issues with his filament sensor on the KLP1 and wanted to be able to connect his Drybox directly to the printer if needed, we designed this upgrade. There are several…

Downloads
384
Likes
39
Rating
5
P
Printablesfindtherror

30mm top riser for Kingroon KLP1

30mm riser for the top plate of the Kingroon KLP1. The screws to mount the riser to the frame are hidden inside, a ball head hex driver is needed. STEP files included, feel free to remix edit: added FreeCAD file edit: added 230 version…

Downloads
374
Likes
36
Rating
4.25
P

Kingroon KLP1 Head model + Fan duct for 5015 fan

Kingroon KLP1 Head model + Fan blower for 5015 fan replacement

Downloads
331
Likes
24
Rating
5
P
PrintablesMarczan2501

Tone arm rest lock clamp for AT-LP120-USB turntable

A replacement tone arm rest lock clamp for AT-LP120-USB turntable from Audio Technica. The piece can easily be bought online from different suppliers but it can also be printed. I printed mine in PLA when the original broke. The…

Downloads
322
Likes
10
Rating
5
P
PrintablesCrazytiti

Kingroon KLP1 220mm head fan

Note : it does not work on the 230mm version. See the commentary section. 10/03/2025 : v8 raised version got an airflow improvement after beeing water tested v9 same airflow for non raised model. 03/05/2024 : v7 add a raised version, 7mm,…

Downloads
322
Likes
32
Rating
4.33
P
PrintablesHeine Sørensen

Kingroon KLP1 riser 30mm and higher and wider TPU feet

Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)

Downloads
318
Likes
23
Rating
5
P
PrintablesOxmstr

Kingroon KLP1 raised top

A simple mod to raise the top lid. 2 versions available; for brass threaded inserts or self tapping screws. 4.5 mm diameter of holes for threaded inserts, 2.7 mm holes for self tapping. Corners are symmetric. First print 1 long piece and…

Downloads
300
Likes
40
Rating
5
P
Printablesprintaboye

Kingroon KLP1 230 Fan Duct

The KLP1 I bought has seems to have different parts with the KLP1 that were already here and all the fan ducts don't fit so I made one. This is for the KLP1 with 230x230mm bed with the upgraded and much larger printer head. Printed mine…

Downloads
268
Likes
19
Rating
5
P
Printablesdudash.creates

Turntable Hinge for AT-LP120

I accidentally threw away the hinges for my turntable's dust cover so I made these replacements. It was a bit expensive to buy 2 hinges online so I designed and printed these. I have at the AT-LP120 USB, but it should fit these models:…

Downloads
260
Likes
16
Rating
4.5
P
PrintablesLouis V.

Minimalist Kingroon KLP1 Lid Riser and Kick Stand

The KLP-1 has an issue where the hotend whip (cable and feed tube) drag on the lid of the printer. Also, the lid doesn't have a backstop, which is mildly annoying. There are some designs already out there to elevate the entire top of the…

Downloads
233
Likes
29
Rating
4.67
P
PrintablesKe We

Kingroon KLP1 Belt Tensioner

On the KLP1 you have to always disassemble the hotend to reach the screws that keep the belt in place in case you want to change belts or tighten it more. This is really annoying and honestly just a bad design. So i made a belt tensioner…

Downloads
232
Likes
34
Rating
5
P
PrintablesnocturnalPotato

Kingroon KLP1 Filament Runout Mod

The PTFE tube on the KLP1 is not held in place and is not fun to load or unload filament. This mod takes 2 2.5mm zip ties to hold the output of the FRS and a 22mm PTFE tube on the load side of the FRS. The PTFE lines up with the in/out of…

Downloads
209
Likes
18
Rating
4.67
P
PrintablesTrax Beaumont

Sony Alpha 6000 Selp1650 lens hood

My Sony Alpha 6000 came supplied with a SELP1650 lens but without a lens hood. The lens hood I designed can be placed over the extended objective (when the camera is switched on) and still allows the use of filters, e.g. a polarizing…

Downloads
207
Likes
31
Rating
0
P
PrintablesIkarusIBK

Protection clip for Steyr LP10

I saw something like that by Matrhack on Thingiverse, but it didn't work for me, so I designed my own quick print. Works perfekt on my Steyr air pistol, don't know if it fits for other pistols. The cartridge diameter is 30,5mm and the…

Downloads
206
Likes
13
Rating
0
P
PrintablesSimone Spezzigu

TPU Vibration damper for Kingroon KLP1

These are customized support feet printed in TPU, they greatly reduce the vibrations of the structure, I recommend re-calibrating the input shaper after installing them because they modify the resonance frequencies The correct orientation…

Downloads
198
Likes
31
Rating
0
P

KLP1 3WAY FAN DUCT ''BLACK''

My print is printed from Graphene PET Printed on 2 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed

Downloads
191
Likes
13
Rating
5
P
Printableslxlolxl

Kingroon KLP1 Extruder part

it's Kingroon KLP1 Extruder part, not for print, just to help you design. I spent almost a day measuring and modeling the klp1 extruder parts. If you need this object to help you adapt the klp1 extruder to your modification, welcome to…

Downloads
188
Likes
20
Rating
0
P
PrintablesAndreas

Kingroon klp1 Füse

Die Füße sind 40mm hoch, dadurch dreht sich der Lüfter an der Unterseite nicht mehr so hoch und wird dadurch leiser.

Downloads
184
Likes
18
Rating
5
P
Printableswaintdeir

KLP1-Bone | Belt Idler Parallel Fix

When I got my KLP1 there were some problems by design. One Problem was the lower belt on the right rear side. The idler pulley is mounted too far to the left, resulting in a non-parallel belt path, resulting in different belt tension…

Downloads
184
Likes
28
Rating
5
P

KLP1 230 PLATE STOPPER

STOP YOUR PEI PLATE !!! NOW

Downloads
184
Likes
22
Rating
5
P
Printableswaintdeir

KLP1-BonEr | Voronoi Bone Extruder Cover

Print it face down, preferably in ABS (PETG might also work well). Has a weight of 13g compared to the 43g of the original metal part. Paint the /!\-Sign like I did if you like :-) You might need to drill the holes for the screws…

Downloads
181
Likes
21
Rating
5
P
PrintablesAaron

AT-LP120-USB Replacement Tonearm Clip

A few years ago I ended up breaking the little clip that holds the tonearm on my Audio Technica AT-LP120 still. Eventually I got around to "designing" a replacement. Basically a direct copy of the original. I printed it solid from…

Downloads
161
Likes
14
Rating
5
P
Printableslxlolxl

Kingroon KLP1 Side Panel Magnet Door (Spool Holder)

My design is to make the side panel of the KLP1 an openable door so that you can install the filament in the door and hide it inside the machine to retard the filament from moisture. The design of chain is designed to compensate for the…

Downloads
158
Likes
26
Rating
5
P
PrintablesDanny N

Kingroon KLP1 230 fan duct (Official)

Kingroon's support came through and provided me with the stl file for the KLP1 230 fan duct. Figure I upload it here to save everyone the trouble.

Downloads
153
Likes
19
Rating
5
P
PrintablesRobert Hunley

Kingroon KLP1 Stylus (Pen) Holder Extended

I printed it flat on the K1 build plate with no supports, 100% infill.

Downloads
152
Likes
12
Rating
3
P
PrintablesCarVac

Kingroon KLP1 hotend shroud with integrated 5015 duct

This is a lighter-weight replacement for the stock shroud on the KLP1 toolhead, that lets you use a standard form-factor 5015 blower fan (the OEM part has a larger port). I measured the stock shroud at 80.5 grams, and the replacement…

Downloads
130
Likes
19
Rating
0
P
Printablesjm wetterene

klp1 fan vent 5015

adaptation de la sortie ventilateur extrudeur pour adapter un 5015 standard 1-découper 4 mm aux oreilles de fixation du 5015 2-récupérer la fiche jst 2mm de l'ancien ventilo imprimé en ABS pour la température

Downloads
127
Likes
11
Rating
0
P
PrintablesFelipe Garcia

Kingroon KLP1 230 fan duct mod for 5015 fan

Kingroon KLP1 230 fan duct mod for 5015 fan Print without supports

Downloads
123
Likes
9
Rating
0
P
Printablesscottep

Laserpecker LP1 Dowel Stand Project

Adjustable Stand for Laserpecker 1, Printed in PLA with 15 % infill. Add 3/4 inch Dowels from Walmart to Complete Project. Adjusting Ring slides on Vertical dowel under LP1 Holder. Printed in PLA with 15% infill.

Downloads
123
Likes
6
Rating
0
P
PrintablesCrazytiti

Kingroon KLP1 fan kit

I just convert the files in stl. Edit : added config files.

Downloads
118
Likes
8
Rating
5
P
Printablestomorrow56

Tool Holder for Kingroon KLP1

Summary This is the tool holder fitted to Kingroon KLP1. Print Settings Printer brand: Kingroon Printer: Kingroon KLP1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Filament brand: eSUN Filament color: White Filament…

Downloads
116
Likes
10
Rating
2
P
PrintablesJohn Stillwell

Kingroon KLP1 filament sensor mod - Updated for 230

I found the original and it was great except for the screw holes didn't line up. Maybe Kingroon changed something. Anyway, I modified this by making it thinner and moving the screw to match what is on my machine.

Downloads
115
Likes
14
Rating
0
P
PrintablesBike_233

Air filter for Kingroon KLP1 启庞KLP1空气过滤模块空气净化器

本模型为启庞KLP1适用的活性炭空气净化模块,同时也适用于很多其他打印机以及常规的桌面使用。需要用的到的材料有:100*100*50mm蜂窝活性炭(这在淘宝网通常可以成箱购买,价格低廉)、7530涡轮风扇、M3热熔螺母*3、M3*5螺丝*3、M3*40螺丝*2、M3螺母*2以及一个移动电源盒。 Some harmful particles could be released during the printing process, especially with…

Downloads
114
Likes
24
Rating
0
P
Printableswaintdeir

Kingroon KLP1 Extruder Cover (clean + with warning)

After I uploaded my Bone-Extruder-Cover using Voronoi patterns I was asked for a clean STEP file for customization… and here it is 😉 Feel free to contact me if you find flaws or need some other improvements. Print it “face down”. The Hole…

Downloads
113
Likes
9
Rating
0

Kingroon KLP1 parallel belts fix v2

This is 3rd attempt to fix that belt idler on Kingroon 1 makes belts not parallel. This one doesn't reduce print area, can be easily printed without support. It mounted using 2 existing screws: one to pulley mount point and one to mottor.…

Downloads
111
Likes
16
Rating
0
P
Printablesdeebatts

Kingroon KLP1 Lid Backstop

Modified KLP1 lid backstop to work with (https://www.printables.com/model/612282-riser-upgrade-for-kingroon-klp1) lid riser. Simply unscrew the 4 screws holding the lid on, attach backstop, then reuse said screws to attach…

Downloads
110
Likes
17
Rating
0
P
Printablesburro_jockey

klp1 hinge

for door

Downloads
109
Likes
11
Rating
0
P

KLP1 HOT PLATE STOPPER

hot bed plate stoper for klp1 210. 4 screws are needed for assembly and that's it - 2x M5 2.5 - 2x M5 1.5 I made this piece because all the others I downloaded and printed had a problem with hitting the extruder head. This one has no…

Downloads
108
Likes
12
Rating
0
P
PrintablesLaire

Gridfinity Sony Lens SELP1650 (Various versions)

You will find different versions in different heights. I have only printed the 6U versions. If you have wishes for other versions, write me a PM or a comment.

Downloads
99
Likes
19
Rating
0
P
Printablesbgalvess

Kingroon KLP1 230 fan for 5015 fan

With this duct fan for Kingroon KLP1 230 I had a print qualaty improvement over the stok one. Printed in 0.2 layer hight. Need support just over a small part of the print.

Downloads
98
Likes
8
Rating
0
P

KLP1 CIRCLE FAN DUCT

CIRCLE FAN DUCT MOD

Downloads
98
Likes
4
Rating
0
P
PrintablesKaruro Chari

KLP1 internal spool holder

A spoolholder to print in pairs and to add to your KLP1 (original version, not the the one with the 230x230 bed plate). Print it in PETG, ABS or any material with a good resistance for the temperature you can end up with inside the…

Downloads
97
Likes
15
Rating
5
P
Printablesjnorre

KLP1 wide spool holder

I originally printed and used the well constructed spool holder designed by Simone Spezzigu https://www.printables.com/model/597464-improved-spool-holder-for-kingroon-klp1, but needed something wider for a couple of older spools of…

Downloads
94
Likes
5
Rating
0
P
PrintablesiRaiFx

KLP1 LED light bar housing + diffuser

KLP1 is a good printer and packed with nice features, Sadly the acrylic panels are tinted which make things hard to see. I made LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a…

Downloads
88
Likes
16
Rating
0
P
PrintablesNS

HyperX SoloCast Mic Adapter (Mount) for UGREEN LP142

I was researching for a mount hand which can handle HyperX SoloCast Mic and found this attractive tablet/phone holder. Adapter which I create is not required any additional screws and nuts. You just replace part. Print instructions:…

Downloads
86
Likes
14
Rating
5

Kingroon klp1 pulley holder for make belts shorter

This pulley holder allow to make belts shorter. This will help to improve print speed and quality by redusing resonanses.

Downloads
82
Likes
10
Rating
0
P
PrintablesCzak

Kingroon KLP1 Pen plotter

Pen plotter for Kingroon KLP1 New 2025 W.I.P. Pen plotter for klp1 210 https://www.printables.com/model/1354295-klp1-210-pen-plotter-revamped-wip Can fit any printer with 3010 fan close to the extruder! Tutorial inside the zip file!

Downloads
82
Likes
16
Rating
0
P
PrintablesAkmjoe

Kingroon KLP1 Magnetic fan upgrade

One of the first problems I had with the KLP1 was the extruder control board blocking the door to the filament gears. This made it awkward to clear a jam in the extruder. The fan housing itself was also in the way. This modification moves…

Downloads
79
Likes
15
Rating
0

Top Riser upgrade for Kingroon KLP1 230

Raise the top cover 38mm at the front and 120mm at the rear. Include the exhaust fan and filament sensor at the rear. Place the filament tube and cable on top. PLA+

Downloads
78
Likes
6
Rating
5
P
Printableslxlolxl

KLP1 Right Motor Belt Parallel

The belt of the KLP1 has a lot of non-parallelism, and this design tries to solve the problem by shifting the position of the synchronizer wheel next to the right motor. The strength of the print may not be sufficient, please do not…

Downloads
78
Likes
6
Rating
5
P
Printableslxlolxl

KLP1 WobbleX Module - Fix Z wobble

Your KLP1 has an ugly Z wobble? This is caused by the Z screws not being aligned and is very difficult to adjust on this machine. Welcome to the ultimate solution, wobbleX. The prerequisite for using this printable part is that you have…

Downloads
77
Likes
7
Rating
0
P
PrintablesLouis V.

Filament Sensor to PTFE Tube Clamp for Kingroon KLP1

Nothing much to say that wasn't in the summary, this just adapts the stock filament runout sensor on the KLP1 so you can screw in a standard pneumatic fitting. That means you can feed filament in from the back of the printer without the…

Downloads
72
Likes
6
Rating
5
P
Printablesjnorre

KLP1 runout sensor

This object is meant to fix filament tube and to move the runout sensor to a more sensible place. The filament tube is fixed, so you do not need three hands to load filament anymore - now you can push the filament into the runout sensor…

Downloads
72
Likes
14
Rating
5
P

KLP1 EXTRUDER COVER "RUSTY"

cover for KLP1 210

Downloads
71
Likes
12
Rating
0
P
PrintablesLP3d

KLP1 Extruder PArt including mockups of Board,Stepper,Nozzle etc

Kingroon KLP1 Extruder part by lxlolxl | Download free STL model | Printables.com Used this

Downloads
70
Likes
5
Rating
0
P
PrintablesDarkwolf7887

ECC2 Toolhead Cover _draft.v1 (GLP1)

I took inspiration & geometry of some of my favorite builders on here. Spliced together this beast using only my slicer. It is a rough draft, and you'll notice some crude splice points. I'm hoping this talented community takes this,…

Downloads
68
Likes
17
Rating
0
P
PrintablesKingroon

Kingroon KLP1 fan kit

These fan kit models were designed for Kingroon KLP1. They can protect your 3D printer fan and make your 3D printing better. You can 3d print these models with PLA filament or PETG filament.

Downloads
68
Likes
11
Rating
0
P
PrintablesMaciek Koza

Arm lock knob Audiotechnica AT-LP120-USB

Arm lock knob for turntable for Audiotechnica AT-LP120-USB

Downloads
65
Likes
1
Rating
0
P
PrintablessilverSl!DE

Case for LP133WF2-SPA1 HDMI VGA Controller Board

got a LP133WF2-SPA1 controller board with HDMI and VGA for a Lenovo Yoga 2 13" LCD screen as a small/portable 2nd laptop screen. Didn't find any fitting case, so created this one, that fits my needs. Print Settings Supports: Yes…

Downloads
63
Likes
5
Rating
0
P
Printables3DGearSupply

LG LP1417GSR air conditioning exhaust to 4" adapter

Fits a little tight. might be able to print at 99% for an easier fit. I just hit it on with a hammer and it fit fine.

Downloads
62
Likes
4
Rating
0
P
PrintablesHeine Sørensen

Kingroon KLP1 Filament sensor spacer

Everybody lowers the spool , and that makes sense , but filament sensor is not in center of spool, this print will take it a bit further to the center , not perfect , but wires is not any longer :-) uses 2x M3x35 hex bolts (40mm with some…

Downloads
60
Likes
8
Rating
0
P
PrintablesMarcin K.

Logitech C270 mount for Kingroon KLP1

PL: "Potrzeba matką wynalazków" i tak powstał minimalistyczny (szybki i prosty w druku) uchwyt do kamery Logitech c270, zależało mi na prostocie a za razem na możliwości zamknięcia górnej pokrywy tak aby kamera nie kolidowała z głowica…

Downloads
59
Likes
6
Rating
0

Parametric version of printaboye's KLP1 230 Fan Duct

Oneshape part: https://dub.wfirbolg.ch/KLP1-Fan Currently printing it...

Downloads
59
Likes
3
Rating
0
P
PrintablesWrenchWorks3D

5015 Toolhead KLP1 230

This is just a new toolhead cover I designed for use with a 5015 fan for KLP1 230. No supports 2 M3 screws 2 heatstake brass inserts 5015 fan If you are using the THR board you will need to cut and splice the original fan wire to connect…

Downloads
58
Likes
8
Rating
0

KLP1 spool holder

So starting from jnorre's model, I thought I adapt it a bit to my needs, experiment with some print-in-place rollers and add a variant with a filament guide structure for an insert for a filament guide I had lying around from an old 3d…

Downloads
57
Likes
9
Rating
0
P
PrintablesCrazytiti

KLP1 sturdy Cover stop

This is another design for the cover stop. I made mine because i broke the other plus i want it a little more vertical. Print upside down without support. Category: 3D Printer Parts

Downloads
52
Likes
6
Rating
0
P
PrintablesCzak

KLP1 Fan mount REMIXED

KLP1 Fan mount REMIXED Updated model 2025.07.13

Downloads
52
Likes
6
Rating
0
P
Printablestomorrow56

Simple Tool Holder for Kingroon KLP1

Summary This is the tool holder fitted to Kingroon KLP1. Print Settings Printer brand: Kingroon Printer: Kingroon KLP1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Filament brand: Kexcelled Filament color: Black…

Downloads
51
Likes
4
Rating
0
P
PrintablesWrenchWorks3D

KINGROON KLP1 230 Door Knob

It has modeled threads for a M4 screw. So you can use the original hardware, just barely snug up or threads rip out, I also included one for an M3 threaded insert. Print face down, no supports. .2 layer height

Downloads
51
Likes
8
Rating
0
P
PrintablesBear

Riser upgrade for Kingroon KLP1 Back wall modified.

Changed the back wall a bit. Added a mount for an aluminum ventilation hose with a diameter of 80mm and a seat for a fan 80x80x25

Downloads
49
Likes
8
Rating
5

Kingroon KLP1 230 THR 2.0

This is the reference size of the THR 2.0, I made it with a plastic caliper, so it may have a little variation from the real one, it is just a template not in detail, but it can serve as a reference to make some mod.

Downloads
47
Likes
10
Rating
0
P
Printablesnightrain912

Hinge for Audio-Technica AT-LP120 turntable dust cover

This is an almost exact replica of the original hinge. You'll need a 3mm pin, a spring with a diameter of 8mm or less (the stiffer, the better - the original spring is very stiff), and any metal washer/spacer above the spring to create a…

Downloads
47
Likes
6
Rating
0

Kingroon KLP1 Minimal Door Knob - Inspired by Roman Ulich's design

While looking for a new knob design for my 3D printer, I saw this knob designed by Roman Ulich design and immediately loved it. https://www.doorhandles-mt.com/katalog/kliky-minimal-maximal/madlo-minimal/ Adapting it for my needs, by…

Downloads
47
Likes
6
Rating
0
P
PrintablesCygwulf

LaserPecker LP1 #2mt lathe tail stock mount

This is a simple mount to hold a LaserPecker LP1 in the tailstock of a wood lathe. It mounts in your #2mt tailstock and should have enough clearance for a straight USB-C power cable or the right angled one that comes with the device. The…

Downloads
46
Likes
6
Rating
5
P
Printablesap.engineering

Vinyl Records Holder for Audio Technica LP120 + Others

Vinyl record / LP Records holder, so I have a easy place to put the record while playing it. Solidworks is provided for easy remix.

Downloads
44
Likes
11
Rating
0
P
PrintablesWrenchWorks3D

KLP1 230 Toolhead Cover (BTT EBB 36 adapter)

****UPDATE*** Someone figured out how to flash the original MOBO and THR so this isnt needed if you dont want to switch to BTT ecosystem. I have completely gutted all of Kingroons' control boards in my KLP1 230, and replaced them with BTT…

Downloads
43
Likes
9
Rating
0
P
PrintablesIron-Dan

KLP1 corner mounting bracket for filament runout sensor

This is a corner mounting bracket for the filament runout sensor of Kingroon KLP1. For better access at filament change or for use with a dry box. Two M3 heat inserts and two M6 push fittings, as well as a cable extender for the sensor is…

Downloads
42
Likes
6
Rating
0

KLP1 230 Extruder Carriage (NA)

Carriage of Kingroon KPL1, version 230. Made for modding. I tried to measure it right, but some parts made on sight. If someone would like to edit to more accurate thing, I'll be appreciate)…

Downloads
42
Likes
5
Rating
0
P
PrintablesZachery Allen

KLP1 Magnetic fan 6mm magnet mod

Adapted the original to use 6x2mm magnets instead of 8mm. Works great and the fan duct seems better than original. Might need to use heat to get magnets in if your tolerances are off.

Downloads
41
Likes
5
Rating
0
P

KLP1 EXTRUDER COVER WITH THR CABLE CLAMP

for assembly you need 2x -3x10mm screws

Downloads
40
Likes
7
Rating
0

KLP1 230 Filament Sensor Spacer

Fits the KLP1 230 variant. With the oem screws and two additional M3x40 screws. Onshape: https://dub.wfirbolg.ch/fs-sp2 Update: Simplified the hole to pass the sensor cable and adjusted the alignment a bit. My first print was a bit off… I…

Downloads
33
Likes
3
Rating
0
P

KLP1 210 BED REFERENCE MODEL

NOT PRINT ! JUST ONLY FOR MODING

Downloads
30
Likes
3
Rating
0
P
PrintablesKarolis

NOCO Lithium NLP14, 500A

Part that is useless now can be a hex tool holder. It might get handy as battery contacts are not phillips head standard as usual. Simply unscrew the original and replace. Caution: this design requires battery belt to secure the hex tool…

Downloads
30
Likes
3
Rating
0

KLP1-230 Sensor Holder with M6 PTFE Fittings

My iteration on Wolf3D's design, offsetting the sensor to easy the filament path and still permit the use of OEM wiring

Downloads
30
Likes
7
Rating
5

Kingroon KLP1 230 EBB42 Toolhead adapter

Adaptador para reemplazar el THR 2.0 de la KLP 230 por un Bigtreetech EBB42. Incluye también una modificación para el ventilador 5020 de la máquina. Lo imprimí en nailon ePA-CF debido a la alta temperatura de la cámara y su proximidad a…

Downloads
29
Likes
6
Rating
0
P
PrintablesMolemanTux

BAMBURIZED + SHERPA MICRO update for KLP1 210 (or Makerparts K)

I have a Kingroon KLP1 210. Didnt like the printer head. So ive made a new one. Now, it uses a Shera micro extruder mirrored: https://www.printables.com/model/1258878-sherpa-micro-romz-remix-mirrored Other extruder should be compatible,…

Downloads
27
Likes
10
Rating
0
P
Printablesmcicekli

sculp1509

sculp1509

Downloads
26
Likes
3
Rating
5

Filament motion Sensor KLP1

Filament motion sensor. Erkennt Verstopfungen sowie wenn das Filament zu ende geht. Benötigt wird: 1 Kugellager 608 ZZ 1 optischer Endstop 1 Bowdenkupplung M10 Anpassung meiner Creation für den SV06 Optional zusätzliche Bowdenkupplung M10…

Downloads
25
Likes
8
Rating
0
P
Printablesflamero

AT-LP120 Dust cover solid hinge replacement

I always take off the dust cover completely when playing records and the original hinges fall off easily and snap into “open” position. I have not used them at all for this reason but that means dust cover moves around and doesn't stay in…

Downloads
25
Likes
2
Rating
0

Kingroon KLP1-230 Foot

Foot for Kingroon KLP1-230, 4x wall, 4x top & bottom. Need screw M8 lenght 30-40mm. Podklejone matą antywibracyjną 5mm. Foot height 15mm. After application, you do not need additional screws to secure the cover.

Downloads
25
Likes
2
Rating
0
P
PrintablesJasonZombie

LG Portable A/C replacement Fan Wheel LP1200DXR

fits LG LP1200DXR portable A/C systems old wheel had small finger attachments this uses a full hub for better support.

Downloads
24
Likes
7
Rating
5

Droid Lp1

Droid Lp1 I created a droid inspired on Adam Savage creation. It prints in parts so you can customize the color if you dont want to paint it like I did. Use the pins to help line up the pieces and use some glue. The wheels turn on the…

Downloads
24
Likes
7
Rating
0