76 models
Model of Grim, from the series Grim Adventures of billy and Mandy. Printed 15% infill + Tree supports. Care with arms and staff when removing supports. This is the first time I've taken one of my blender art and turned it into a 3d print…
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for one variant
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach planet tripod.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting plate for the GMKtec NucBox5 mini PC. The mini PC has two M2 screw holes on the bottom, which I use to attach the plate. The plate itself provides two positions for M4 hexagon nuts, allowing it to be mounted with the…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach uni tripod.
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
These are Losmandy Gemini controller holders for non-Losmandy mounts or tripods.
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my SR2 . The pieces are divided per their color. For the assembly, I recommend to watch the following video.
Mandy runs a candy store where she dresses in costume and doles out sweet treats. She's a little too into the act and rules her candy kingdom with an iron fist.
Undaunted: Normandy base for miniatures with a hole for tokens
This losmandy-style dovetail is intended to be mounted on top of a telescope for accessories like minipcs, dew heater controllers and power-distro. All threaded holes are M6x1 threading. This bar is intended ONLY for top mount use, do not…
The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…
I created this Losmandy style camp, so I can attach whatever I like on my OTA. I found some others on the internet, that did not clamp enough or used imperial sizes. This is a remix clamping better for me and using regular nuts and bolts.…
29. Dec. 2023 Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON!…
Public domain model of the Normandy from Mass Effect by JoshuaS . Originally uploaded to Blend Swap .
This part is a remix of Erwin's Losmandy Clamp, slightly modified to provide a tighter fit for Celestron CGE dovetails. A printable knob is included to make mounting the clamp easier. The larger part in the print is unmodified, so if you…
This set of radius block allows you to attach a narrow dovetail bar (i.e. Vixen / CG-5) to the Losmandy attachment points on a Celestron C8. This is useful when you wish to (1) attach your C8 to your mount using a Vixen bar, AND (2)…
You can glue two 10 x 1.5 mm round magnets in the base. Print instructions Recommended infill angle: 0° Color changes: White -> Black -> Gold Low speed and high temperature will create a shiny top surface. There are "holes" inside the…
By request: Cerberus logo set for Martin's brilliant Normandy SR2 model. Quick and easy convertion in Thinkercad, took litterally 10 minutes. Please visit user @Martin on printables for the magnificent base model of the Normandy SR2 Files…
This is my design for an Undaunted Normandy Insert. Everything fits nicely with room for the rulebooks on top. One caveat with my design is it is designed to hold the unit tokens in the coin cases I purchased, so this is unlikely to work…
Losmandy rail clamp that is designed to mount a lightweight object, such as a mini pc to a Losmandy/"D" rail installed on a telescope. Unless the 4 M3 screws match up directly (30mm on center) with your piece of equipment/object, you will…
This is a 2" wide losmandy rail clamp that was designed to hold a lightweight object on the top rail mounted on a telescope. The round hole in the flat portion of the clamp is for a 1/4-20 screw that is counter-bore (.44" wide X .30"…
An alternate stand for Martin's gorgeous Normandy SR-2 which mounts the ship at a slight angle to show it off better.
This tripod foot is meant to be an improvement over the Losmandy Tripod Foot, which does not stay attached to the tripod during transit. This new design fits into the open bottom of the leg extrusion, friction fit, so that it stays with…
Gun emplacement based on the Longues-sur-Mer battery. It is not intended as a scale model, but as a similar casemate site. According to Wikipedia, the guns used at that site were 15 cm TbtsK C/36 naval guns. If so, the gun on this build…
Remix of a Losmandy clamp model from Onshape by Alex Douglas. I see a lot of variations of it floating around, not sure who the originator is. This model passed fit checks, clamps well, and worked flawlessly for its first night of use.…
This is an organizer for the Undaunted: Normandy + Reinforcements board game. This organizer was designed to store the content of Undaunted: Normandy combined with the Reinforcements expansion (Normandy content only). The unit cards for…
Use 4x ¼-20" screws to mount. Included part file in case you want to change the angle more. (Currently offset by 10deg) The ship pushes in snug on the bottom and can comfortably be removed. No glue necessary.
Insert for the board game Undaunted - Normandy and the relevant parts from Undaunted - Reinforcements. This insert fits sleeved cards for Normandy (including the cards from Reinforcements). It also fits the relevant AI cards from…
Mounts to wall and displays model on an angle to show it off more
Well, I bought a used OTA without really looking at the dovetail style until two days before I planned to use it. I couldn't find anything at a reasonable price, let alone anything that would arrive in time. So I decided to design an…
A model of my lhasa-chon created by the AI at https://hyperhuman.deemos.com/rodin. It was based on three photos of her.
Hey all, this is my 2nd attempt at a board game insert. This does not fit sleeved cards but with some modification to the file it is completely possible. This holds all the additional parts from Reinforcements for Normandy and maintains a…
These are two different designs that are meant to go over the standard knobs used on Losmandy telescope mounts (i.e. G11, G8, etc.) in order to help with comfort and leverage, particularly during loosening. Especially during the winter…
Print instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest.
silk pla nozzle 210 bed 60 no supports 15% infill
I introduce the Askar Universal Losmandy-Style Dovetail Full Plate Series. 200mm Completed 300mm Completed 400mm Completed 500mm (In Progress...if I can find a reliable diagram...) I have added a line of holes every 10mm on the dovetail…
This dovetail converter will enable you to convert your Losmandy plates to accept Vixen-style. << BOM >> m5 hex bolt 40mm 2ea m5 hex sockethead cap screw 20mm 8ea m5 hexagon nut 10ea Instant adhesive
Grip-nut CELESTRON CGX CGXL losmandy nut
I could have used bolts to achieve the same function but metal bolts would mar the finish of my telescope mount. So I designed a plastic brake to prevent the telescope from sliding off the mount if the mount clamps are not tight enough.…
UPDATE Over the past few days, I've been working on this design and made some changes. There are now stepper mounts for both RA and DEC, and a single belt cover design that fits both stepper mounts. In addition, on the inside of the…
I needed a Losmandy clamp for an 8" SCT Dovetail bar to hold an AISAIR plus and/or guide scope. Every model I found required an intermediary between two styles of clamps (perhaps I could've searched deeper, I have an unusual set-up, or I…
Adapter plate to attach a Morefine M6 MiniPC to this Losmandy/"D" rail clamp . Used together, this mounts on a Losmandy rail installed on a telescope. The 4 inset mounting holes are for M3 hex nuts and are 30mm on center. The 2 adapter…
I remixed the clamp and added holes for mounting Pegasus Astro gear. M3x16mm Screws, a M6 screw and a M6 nut needed. I printed it with the Prusa Mk2S and PLA.
30° Meridian Offset Wedge 3D Printable wedge designed to provide an additional 30 degrees of offset to allow imaging across the meridian line in RA mode without meridian flip. This was originally developed in response to discovering that…
There are 2 models, each with 6.5 mm holes, one with a 1 inch separation and another with a 1.5 inch separation and a bit more height to handle 2 cables and 3 cables respectively held down on a Losmandy Universal Dovetail Plate.
Made entirely by cutting up different models in a slicing software. Absolutely not the most graceful of models. You'll need supports, and I suggest printing in the default orientation to ensure the Skadis pegs and Normandy mount doesn't…
This is a cover of DEC transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
Printed with supports. The holes on the plate side have the dimension (6.4mm) to insert ruthex 450xM5S threads for M5 screws. The holes on the Mele side are 3.5mm for M3 screws.
I created this stand for the Normandy SR2 model created by Martin. Can be painted in match whatever color scheme the ship is.
UPDATE 18.05.2026 - uploaded new versions 1.1 of USA, german and map tiles parts Welcome, insert fits CZ version of the game but should fit ENG version too. Printed with 0,2 layer Enjoy!
Remixed to fit on 256mm bed size.
This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
Here are 15x15x40mm & 15x18x52mm bubble level holders for the slim Losmandy-styled dovetail bars made by MoreBlue. And the hole pattern fits MoreBlue dovetail bars.
Low profile Losmandy Dovetail for Meade 8 inch SCT. Preferably CNC machined from aluminum. You can modify (shorten) the length of the dovetail by changing the value of the parameter E in Autodesk Fusion (by opening the .f3d file in…
Snug fit printed flat on a Prusa Mini on 0.2mm speed profile PETG - 100% infill. Print time around 70-80mins. The fit is quite tight and the print scale might be able to be scaled up by 2% to make it a little looser. This was created at…
Saint Adela of Normandy - Devotional Statue is a religious statue and sacred figure designed as a saint sculpture for respectful display. This devotional sculpture is ideal for display on a shelf, altar, or collection, and also suits…
This is specifically for the Gemini 2 hand controller and the Losmandy Folding Heavy Duty Tripod with 3" diameter legs. Printed in three parts, the controller holder and two clips, are meant to be glued together. I used ASA-CF since this…
This is a tuck-in motor modification for the classical Losmandy G11 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and…
This is a 15x15x40mm bubble level holder for the RA axis of Losmandy GM8/G811 equatorial mounts.
Losmandy sold the 12288-tick line encoder many years ago, however, there were no covers to protect the encoder pinout & connecting adapter. Here is a cover for such vintage 12288 tick encoders. Note: some modified versions, TypeA & TypeB,…
This is a tuck-in motor modification for the classical Losmandy GM8 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and…
These are tube rings with Losmandy dovetail that I'm using on my 6" (150mm) Newtonian astrophotography rig. They fit ø177mm tubes from GSO often resold under many other brand names. Bill of Materials Item Description Quantity 1 M4x40 Hex…
Universal drop-on desk rest for rail-mounted telescopes One reusable standard for the two common telescope dovetail families. Lower the telescope vertically until the outer load-bearing edges of its bottom rail rest on the broad TPU pads.…
This is a tuck-in motor modification for the classical Losmandy Titan-50 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly…
Adds a cover to the dice and token so they don't rattle around if you don't own the reinforcements expansion.
These are 2 mm thick counter bases and a storage box/lid for Mike Lambo's The Fields of Normandy wargame. These are bases for the orginal counters to the game that can be found here . The numbers after the filename are the number that…
This dovetail converter will enable you to convert your Losmandy plates to accept Vixen-style. << BOM >> m5 hex bolt 40mm 2ea m5 hex sockethead cap screw 20mm 8ea m5 hexagon nut 10ea Instant adhesive
Inserts / Organizer for Undaunted Normandy by am-media.biz 🎺 **FEATURES** 🎺 This is a 3D printable inserts for the board game Undaunted Normandy, designed to organise ALL the components of the base game inside the original box. Thanks to…
Places Art - Mont-Saint-Michel in Normandy, France 3D printable model.
