Search results: micr

Sort order

8,685 models

P
PrintablesDave

Steam Deck Carrying Case Insert With Stand (EU Plug + MicroSD)

I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…

Print approx. €6.34–€7.75 excl. taxPreliminary estimate for one variant

Downloads
4,318
Likes
592
Rating
4.66
P
PrintablesAdam Kimmerly

Mini Microphone for QMX, (tr)uSDX, uSDX, KX2, and KX3

BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,843
Likes
289
Rating
4.87
P
PrintablesJOAMON

USB, SD & Micro SD Holder - Fully Customizable

Design Background: I needed a USB hub for 10 USB drives, 5 SD cards and about 10 Micro SD cards. I searched for one that fit my needs but couldn't find a perfect one. The designs online either had excess number of slots or had a shortage…

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,237
Likes
115
Rating
4.91
P
PrintablesP-atix

Micro-Machine T3 van

Parts are optimized for ease print.The main body was pre-supported. If you want to make your own supports, a file without them is included. Keep the orientation of the parts as original STL file! The whole model is bolted together with…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
1,056
Likes
543
Rating
5
P
PrintablesactualSIZE

Transformers G1 Panther (Ravage) Microcassette

Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant

Downloads
1,053
Likes
238
Rating
5
P
PrintablesMaika Rose

Surefeed Microchip Pet Bowl Frame Cat

This helps stop other cats from stealing food. The size is for average, non-overweight cats. Although a small chonker would probably also fit!

Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant

Downloads
531
Likes
16
Rating
5
P
PrintablesmuJoseph

Micro Drip Irrigation Kit Hose Clamp Stakes

Tips Use a zip tie through the hole to further secure the tubing within the clamp (optional). Print with PETG for best performance in outdoor applications.

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
522
Likes
61
Rating
5
P
Printablesjanpetrik72

Holder for micro servo SG90

Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
355
Likes
53
Rating
0
P
PrintablesLayerCake

Supermicro Front Noctua Hot Swap Fan

This front fan holder for 80 mm Noctua fans uses their included anti vibration mounts and reuses the old plugs from preexisting Supermicro fans. If you don't have any old fans as a source the part numbers seem to be: Housing: Molex…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
49
Rating
4.83
P
Printablestianmarin

Parametric Arturia Microfreak Synth Stand

My very first thing! This is a parametric stand for the Arturia Microfreak synth. To change parameters just download the f3d file from https://github.com/tianmarin/mf_stand and open it on Fusion 360. Go to Modify > Change Parameters and…

Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant

Downloads
323
Likes
46
Rating
5
P
Printablesdom.3D

BMD MicroConverter mount

Bracket to mount a BlackMagicDesign Micro Converter (SDI-HDMI) on a surface.

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
296
Likes
36
Rating
0

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack

I turn a lot of pens and use Micro-Mesh sanding pads to polish them when finished. I wanted a nice rack to hold the pads, and I think I went a little overboard with my design. This rack is fully skeletonized with a honeycomb pattern to…

Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant

Downloads
273
Likes
89
Rating
5
P
PrintablesP-atix

The Mystery "Micro" Machine

Remixed The Mystery Machine van with cool tooned look. Parts are optimized for supportless print.(However, if you have problem with fenders use a support enforcer.) Keep the orientation of the parts as shown on the picture! The whole…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
97
Rating
5
P
Printableso.bostik

Clarinet/Flute Microphone Clip for T.bone Ovid CC100 or DPA 4099

Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
270
Likes
18
Rating
5
P
PrintablesGeorge75

BATTERY BOX - MICRO BOX

INNER BOX SIZE 58X100X56MM PRACTICAL BOX WITH SEAL AND CLOSING CLIP FOR STORAGE OF SMALL ITEMS. To assemble the box you will need 3pcs M3x30mm screws. Print out the battery box insert and you can store AAA and AA batteries in the box.…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
267
Likes
48
Rating
5
P
PrintablesCatdad Workshop

SureFeed microchip pet feeder shallow raised bowl

A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right? Anyway, I am always happy to help. There was already a design on…

Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant

Downloads
254
Likes
18
Rating
5
P
PrintablesDrEasyChair

MicroMacro Markers

Helpful markers for tracking the dizzying number of suspects and clues. Update: Now with hexagon markers!

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
248
Likes
32
Rating
4.86
P
PrintablesMatt

Stackable Stand for 1.5 ml and 0.5 ml Eppendorf Type Microcentrifuge Tubes

This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…

Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
63
Rating
0
P
Printableso.bostik

DPA/t.bone Ovid microphone holder for accordion

Another variation of t.bone ovid/DPA microphone Intended for the left/bass side of accordion to attach the microphone to the accordion belt. Intended to use with this ebay cable organizer .

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
234
Likes
12
Rating
0
P
PrintablesWim V

Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard

Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
224
Likes
12
Rating
5
P
PrintablesTantalus

Mitutoyo Micrometer Replacement Battery Cover

This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
7
Rating
0
P
PrintablesMorten R

Micro-SD stand with Dymo Labels

Stand for either 5 or 10 Micro-SD cards, where each slot can be described with 12 mm Dymo labels. In addition to the Micro-SD slots, there are two slots for Micro-SD to SD adapters and three slots for USB adapters. At the back there is a…

Print approx. €5.86–€7.17 excl. taxPreliminary estimate for one variant

Downloads
163
Likes
20
Rating
5
P

Fiskars No. 5 Micro-Tip Scissors Sheath

This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
13
Rating
5
P
PrintablesHunt05

Jazwares Micro Galaxy Squadron T-6 Jedi Shuttle Stand

This is a simple stand for the Jazwares Ahsoka Tano T-6 Jedi Shuttle from Micro Galaxy Squadron. It can support the shuttle in many different modes as the wing can rotate 360 degrees. If you use the gcode files, I used Hilbert Curve for…

Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
15
Rating
0
P
PrintablesNoWayCall

Small Microphone Pop Filter / Screen / Shield | (Shure SM58 style Mic.)

Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
25
Rating
0
P
PrintablesVeracon

CAA Micro Roni Gen4 Bump Stock Extender 50mm

🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…

Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
18
Rating
0
P
PrintablesBpendragon

Micromatch IDC crimper Adapter

I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
9
Rating
4.5
P
Printableso.bostik

DPA/t.bone Ovid microphone universal holder

Another variation of t.bone Ovid/DPA microphone holder intended for universal use. Needs one of Parkside clamp set 35x33mm , one M4x25mm screw as a replacement for original one and one M4 nut.

Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
2
Rating
0
P
PrintablesTristan Jung

Ender 3 V2 X Stop Mount for Microswiss NG Extruders

This is a Simple Mount for the X-Endstop w/ Microswiss NG Extruders, For use with the original screws. The original mounting position doesn't allow the NG Extruder adaptor plate to hit the end stop switch, this simply p rovides a new…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
98
Likes
20
Rating
5
P
Printablesjeff

Supermicro CSE846 80mm fan adapter

This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
12
Rating
0

ADSM302 Microphone Arm Mount

Microphone arm mount for ADSM302 or similar microscopes with up to 35mm in mount diameter. You will need: 3 x M3 square nuts 3 x M3x10 or similar screws 1 x M3x40 mm or similar screw These parts should be familiar to Prusa owners and will…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
22
Rating
0

Microchip Snap Cover PG164100

This 3D case is designed to securely house the Microchip Snap PG164100 Programmer. It ensures protection against physical damage while maintaining full functionality and easy access to all ports and connectors.

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
3
Rating
5
P
PrintablesJay Nimbus

Intel NUC Wallmount/Under Desk Mount Micro

Gcode included for PLA 0.4mm. If you print correct way up no supports needed.

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
8
Rating
0
P
PrintablesLarryD

LED Light for GALILEO Modular Microscope

Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
30
Rating
0
P
Printablesbassklampfe

Kazoo-Mount for Microphone-Stand

A friend of mine wanted to play guitar and kazoo simultaneous, so I created a kazoo mount for his microphone stand. Print: 1 x KH-Kazoo-Hold 1 x KH-Stand-Hold 2 x KH-Bar 3 x KH-Nut-Handle You'll need 3 x Screw M4x20 (with hexagon head) +…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
11
Rating
0
P
PrintablesLord Rosomak

Stativ pro mikroskop / Microscope stand

Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
7
Rating
0
P
Printablespaururo

Magnetic Micropipette Holder for Efficient Lab Organization

Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
67
Likes
13
Rating
0
P
PrintablesStrankler

Huawei P20 pro Phone-Camera Mount for analog microscopes

I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…

Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
62
Likes
18
Rating
0
P
PrintablesVINC3D

◤ LAB GRAB | microscope slides

🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉 The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
16
Rating
0
P
PrintablesOscar Creator

SD & MicroSD Card Card

Minimal SD card holder in the form of a card. This version takes the best of other card like SD card holders and combines them into one. Thin design . Total weight is about 6g and almost all walls are just 1mm thick Easily slide out SD…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
10
Rating
5
P
PrintablesJoshPlayz

Microphone Holder/Lekato Microphone Holder

PRINT IN THE SAME ORIENTATION YOU MOUNT IT IN, SUPPORTS ON. PRINT IN A HARD MATERIAL LIKE PLA. The diameter of the holder part for each microphone is 37.1mm. It's made for wireless microphones, because there is nowhere to put the wire…

Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
6
Rating
0
P
Printablesn00by

Fiskars scissors Solid Micro-Tip wall bracket

Fiskars Micro-Tip wall bracket to screw on the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA black Notes: There is no specific need. You…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
6
Rating
5
P
PrintablesNoFate301

Lovesense Solace, microphone stand mount

So I'm telling on myself a bit here, but yea, I acquired a Lovesense solace and I wasn't thrilled with the desk mount they had included. It doesn't have a lot of range. I did have a microphone arm and well I started designing. I found out…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
7
Rating
0
P
Printablespongant

Microcosm: Three-Spined Stickleback

This is a display model for the Three-Spined Stickleback. With the advent of high-throughput sequencing, this species became a model for studying parallel evolution and local adaptation. The model is best printed as seen in the pictures.…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
7
Rating
0
P
PrintablesDS3D4U

DS3D4U Micro Wallet

An attempt to make the smallest wallet possible without sacrificing structural integrity. Print tested in PLA at 0.10mm layer height with 3 perimeters @ 30% gyroid infill tolerance between parts is 0.10mm. .STEP provided to show how it…

Print approx. €11.07–€13.54 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
15
Rating
0
P
Printablespongant

Microcosm: Green Alga Display Model

This is a display model of Staurastrum longipes (Nordst.) Teiling, a common freshwater green alga. As part of the order Desmidiales, this single-celled phytoplankton consists of two distinct hemispheres (semicells), connected by a…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
12
Rating
0
P
PrintablesMikyner

Microlube GL 261 (40g tube) LM8UU applicator

Klüber Microlube GL 261 (40g tube) LM8UU applicator needs supports

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
5
Rating
5
P
PrintablesMike

Replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips

This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
2
Rating
0
P
PrintablesFranspai

Netgear GS105 switch rack mount for the microlab

The tolerances are a bit tight so you might need to sand it down a bit.

Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
8
Rating
0
P
PrintablesThalaski

Supermicro CPU heatsink fan adapter SNK-P0048P

My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
4
Rating
0
P
PrintablesJamie

Sony Multi Interface Shoe Cover and Lapel/Lavalier Microphone Clip

A cover for the Sony Multi Interface Shoe that allows for a Lapel microphone to be clipped on and attached. Protects the digital pins by covering them. The cover does not touch the pins at all. Should work with all lapel microphones with…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
4
Rating
0
P
Printableswinqooq

Yihua 8858 hot air station holder (Micro 8858)

You will need for assembly: 2-4 studs m3 (10-15 mm) 2-4 nuts m3 3 brass spacers m4 (diameter 6 mm) 3 screws m4 30 mm if your original stand is lost, use this model…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesKotelnik

Micromatic valve Protective cover

I created a protective cover for the CO2 control valve for my CO2 pressure bottle, which I use for tapping beer, which can be easily inserted and removed from the pressure gauge. They are nicely hidden to avoid damage. I printed from PLA…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
3
Rating
0
P
Printablespongant

Microcosm: Mud Dragon fridge magnet

A simplified model of a mud dragon: a kinorhynch (genus Echinoderes). These animals occupy the space between sand grains in habitats ranging from beaches, to the deepest depths of the ocean. Their bodies are visibly divided into head,…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
12
Rating
0
P
Printablespongant

Microcosm: Eldritch Sandworms of the Deep

These are display models of Musellifer profundus Vivier 1974, a deep-sea gastrotrich. This worm is frequently encountered in the vast plains of the ocean bottom, from shallow coastal waters to the deepest depths. Members of this species…

Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
7
Rating
0
P
PrintablesBill Porter

MTR3B Case for use with Micro-Clipboard

This is a MTR3B radio case. In addition to use as a case, it can be flipped around and coupled with my micro-clipboard for handheld operation of the radio and a morse paddle while also being to log onto a piece of paper. The case is sized…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
3
Rating
0
P
PrintablesSuttonj5520

Battery Cover for IP54 5-Button Micrometer

I got this micrometer at an auction with several other tools. Then discovered it did not have a cover for the battery compartment. Kind of a pain having to use one finger to hold the battery in place every time I need to measure…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
1
Rating
0
P
Printablesdym801

Honeycomb Wall USB-A, USB-C, SD, and Micro SD holder (Remix)

One small holder to handle your storage needs to your hexwall

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
5
Rating
0
P
PrintablesLayerCake

Supermicro Slim ODD Bay ICY DOCK MB852M2PO-B Adapter

While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
1
Rating
0
P
PrintablesBicyclerepairGM

Microlino Quad lock Mag Mount

Both of us have a Quad Lock case on our phone. And this way we can both charge our phone when using GPS The print needs a little polishing after printing it since i didnt want to have a flat face to print it upon. Also recommended to…

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
2
Rating
0
P
PrintablesLayerCake

Supermicro FDD Bay ICY BOX Front Panel Adapter

A set of parts to adapt the existing FDD tray on a Supermicro CSE-835 server to accept an ICY BOX front panel . Assembly The FDD tray needs to have it's front replaced with the printed bezel and the screws might need to be filed down on…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
2
Rating
0
P
PrintablesMixerboy24

Blackmagic MicroConverter USB-C Mounting Bracket for Camera Rigs

During a recent production, we noticed the absence of a suitable stand for SDI to HDMI or HDMI to SDI converters that could be securely mounted on production or DSLR camera rigs. I used Blackmagic Design’s BiDirectional SDI/HDMI 3G as a…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
4
Rating
0
P
Printables_KaszpiR_

Nevermore Micro V5 Dual HEPA filter mod

About Nevermore Micro V5 Duo Lid for HEPA filter mod: aligned fan holes bigger fan holes extra hollow areas on the walls for better flow one extra mini-support for the filter tested with Nevermore Micro V5 Duo V2 Changelog 2025.06.26…

Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
4
Rating
0
P

Micro Pen / Pencil / Scissor / Eraser Holder for Art Students

Art students use the 10 different size Micro pens to draw in black ink on white paper. When using all these different-size micro pens, I wasted too much time looking for the desired pen size on the end caps, which display the size. The…

Print approx. €5.61–€6.86 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
1
Rating
0
P

TD-H8 microphone connector cover

A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
3
Rating
5
P

System 58: "Micro" Box; incl. FreeCAD design

This box is part of the "System 58" collection of boxes. It can be used standalone, e.g. for storing common USB devices. Or it can be used with most of the "System 58" inserts to turn it into a small sorting box. See the pictures above…

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
1
Rating
0

1S Li-ion charger - MicroUSB and Alligator Clips

1S Li-ion charger Universal charger 1S Li-Ion. You can use alligator clips, a DC connector, or whatever you need. BOM: 1S li-ion charger based on TP4056 DC cable DC jack Alligator clips 2x M3 screw 2x M3 heat inserts Basic specifications…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
2
Rating
0
P
PrintablesJames Kirk

Mount for LED-Controller on Zeiss Microscope

If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…

Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
1
Rating
0
P
PrintablesJoKa

Vortex attachment for falcons and microcentrifuge tubes

The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P

Leg of the "Sharp R-200(IN)W" microwave / Bein der "Sharp R200 INW" Mikrowelle

Replacement leg of the "Sharp R-200(IN)W" microwave.

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
1
Rating
0
P
PrintablesREMLURELMI

Microwave Rules Sign

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: As modeled

Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0

Micro-Mini Scooter Handle

A handle adapter for a Micro-Mini scooter. Tired of bending over to help your new-to-scooting child as they go along sidewalks with you? Tired of your rider running out of energy half way through a walk? Tired of needing to intervene to…

Print approx. €3.84–€4.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
0
Rating
0
P
PrintablesDrobek

Tonometer Microlife battery cover/Tonometr microlife kryt baterk

I lost battery cover for my Microlife (BP A2 Classic) tonometer and i made new one. / Ztratil jsem kryt baterií u mého tonometru Microlife (BP A2 Classic) tak sem si vytvořil náhradní. Material - PETG white 3DFox Layer 0.2mm Print…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
3
Rating
0
P
Printablesmgen

Microsoft WebCam mount for the PrusaBox

Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
0
Rating
0
P
Printableszanglerecke

Neff Microwave Button

The door button was defective, and the microwave was not functional anymore - you cant open the door, as one of the hinges was broken. I made a replacement part for that. Actually there where two parts broken, as it was disassembled with…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
PrintablesBenCh

ScientaOmicron VT AFM XA Preamp bracket

Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.

Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
Printablesrichnormand

LOMO stereo-microscope spacer for smd work

Makes work easier when I park my LOMO stereo microscope when doing smd repairs with different pcb height. This is because of the installed LED ring illuminator ring depth when I park the setup on the side of the bench while keeping the…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesBooboo_Chaos

Microfiche Box

Eine einfache Box mit Deckel für A6 Microfiche Fasst mindestens 500 Blätter Bodenloch zum leichten entnehmen der Blätter

Print approx. €5.96–€7.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesFokieH

Wera MicroBit MagDock - for Desktop, Skadis & Honeycomb

Hier ein Halter für das Wera Micro-Bit-System. Die Bits werden magnetisch auf ihrem Platz gehalten und im unteren Teil ist noch eine kleine Ablage integriert wo kleine Schrauben abgelegt und ebenfalls magnetisch festgehalten werden. So…

Print approx. €3.23–€3.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
0
Likes
1
Rating
0
P
PrintablesMaple DIY

Build Plate Cleaner Microfiber Holder

Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…

Downloads
51,932
Likes
18,266
Rating
4.95
P
Printablesmmurase00

SD/MicroSD card case

(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructions Added a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter.…

Downloads
40,463
Likes
11,391
Rating
4.46
P
PrintablesFH

MicroMax - SD card grip

In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…

Downloads
12,650
Likes
4,206
Rating
4.69
P
Printablesnerdpersonthing

Hinged SD / microSD Card Box - Gridfinity compatible, latching, print-in-place

A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…

Downloads
7,542
Likes
1,815
Rating
4.84
P
PrintablesRapterron

SD & Micro SD - Card Box (for 11 x SD & 16 x microSD) print in place

Remix from the awesome print in place "Hinged Sd & Micro SD Card Box - 16 Slots - All In One Piece by 8u9o" https://www.thingiverse.com/thing:3611322 Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…

Downloads
7,169
Likes
1,100
Rating
4.94
P
Printablescodysechelski

Gridfinity SD Card, MicroSD Card, and USB Stick Holder

Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks

Downloads
6,848
Likes
825
Rating
4.78
P
PrintablesTom

Micro-SD Card Case

This is a micro-SD card holder for 18 micro-SD cards. A save place for a lot of data ;-) It is a smaller version of my popular SD-card holder: https://www.printables.com/model/69096-sd-card-case After printing you should screw the jar and…

Downloads
6,796
Likes
1,118
Rating
4.89
P
PrintablesMateo Van Damme

(Micro) SD Card Holder 2

Holder for Micro SD Card Holders. The last edition relied on a friction fit which led to issues on other printers. This time I have completely redesigned the model from the ground up to use springs instead. This means that the tolerances…

Downloads
6,087
Likes
737
Rating
4.85
P
PrintablesLudvig Broomé

Micro Servo 3D Model (STP)

3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.

Downloads
6,016
Likes
55
Rating
5
P
PrintablesE3D

Prusa Mini+ Upgrade (Edition 2) Revo Micro

MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…

Downloads
4,203
Likes
762
Rating
4.91
P
Printablesc00lrunnings00

Micro SD BOX

I was looking for a place to store my micro SD cards + adapter and came across the design of "bgill". Unfortunately only for micro sd cards without adapter. So I made a remix based on bgill's design.…

Downloads
4,120
Likes
459
Rating
4.81
P
PrintablesCADScott

Slimline Sliding Micro SD Card / SD Card Holder - Multiple Sizes

UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter. This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that…

Downloads
4,095
Likes
662
Rating
4.79
P
PrintablesNeevoet

Adjustable Microphone Arm

Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…

Downloads
3,972
Likes
751
Rating
4.88
P
PrintablesKT3Dprint

Micro disc gun (Easy, quick, print-in-place)

Micro Disc Shooter This is a travel prefect, print-in-place micro disc shooter. It measures about 5 × 3 cm (2 × 1.2 in). With the disc clipped in place, it slips easily into your bag—always ready for a quick game or a fun challenge. How…

Downloads
3,789
Likes
393
Rating
4.96
P
PrintablesBuzzKillBillZ

Recreator3D Micro Plastic Shredder

Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…

Downloads
3,685
Likes
1,028
Rating
4.45
P
PrintablesKimframes

SD/microSD card holder

Credit card sized SD and microSD card holder. 15 Jan 2021 update added SD only and microSD only holders added stackable versions of all holders 24 Jan 2021 update minor design tweaks 3mf file added

Downloads
3,559
Likes
661
Rating
4.78
P
PrintablesStenly_G

V8 Engine Block Pen Holder (USB, SD, microSD)

A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…

Downloads
3,518
Likes
813
Rating
4.88
P
Printablesscottg

Micro Mini 13 Jointed Action Figure

As small as I could go with functional, working ball joints. Fused the armor and frames together except for the interconnecting, moveable joints. 0.12mm layer 2 walls, 50% infill Auto tree support, build plate, critical Print time <45min…

Downloads
3,294
Likes
316
Rating
4.33
P
PrintablesDrJones

micro-gear fidget ring

I finally tried out my 0.2mm nozzle and made a fidget ring for it. This one is all-day wearable just like a normal ring - at least I found it to be; it does have quite some thickness, and you might find that still comfortable or not. If…

Downloads
3,222
Likes
621
Rating
3.88
P
PrintablesSedak

SD || MicroSD card case

| BASIC DESCRIPTION | it is a remix of a model found here: https://www.printables.com/model/20415-sdmicrosd-card-case https://www.printables.com/model/23326-sdmicrosd-card-case-snap-fit this remix has 8 slots for microSD, and one for the…

Downloads
3,170
Likes
441
Rating
4.76
P
Printablesauc7us

Microbot Fidget

The Microbot Fidget is based on Hiro's Microbot from Big Hero 6 Both the parts snap fit together. Print details: Material Used : Prusament PLA Prusa Galaxy Black Layer height: 0.15mm Supports: N o Brim: Yes (Only for vertically printed…

Downloads
2,963
Likes
719
Rating
4.55