692 models
Using a laser pointer (preferably green since it is more powerful) and a disposable syringe, it is possible to build, in a very simple way, a microscope of approximately x1000 magnification, with which microorganisms can be observed in a…
Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…
Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…
Simple mount allowing you to attach microscope to Elgato mic arm . Holder can work with multiple diameters: 50 mm - put optics through top of holder, screws are optionally needed just for extra security, but it has strong fit even without…
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Color filters for microscope. Easy printing within one hour. Can be used as a light diffuser. Use transparent filaments to print the color filter. If you want a more pronounced color or light scattering adjustment, scale the Z axis (0.2 -…
The Leica M320 surgical microscope is state-of-the-art technology. Nevertheless, hazards can arise during operation.
This part is an offset / spacer shim designed for the Vevor JH-1B multidirectional microscope . Its purpose is to slightly shift (de-center) the microscope position , making it easier to fit into your workspace and improving comfort…
This is an emergency fix; this part is not supposed to replace correct original manufacturer's part. Manufacturing instructions Material: ASA 3D Printer: Any FDM 3D printer capable printing ASA Slicer settings: no supports Post processing…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
This is a 100% 3D printed phone holder for microscopes, designed to make capturing images and videos simple and precise. The mount allows smooth adjustment left, right, up, down, and forward and backward relative to the microscope lens,…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Check the published mods, you may want some of them right from the start! The improved stage movement is ESPECIALLY recommended :) This project is about an affordable, expandable and customizable microscope based around basic hardware, 3d…
This is an another USB microscope adapter for my modular stand. Modular stand: https://www.prusaprinters.org/prints/48589-modular-stand-for-electronic-microscope Designed in FreeCAD 0.17.
A simple holder for microscope slides. A fast-to-print rack. Do you like it? Please consider to buy me a cup cup of coffee . Thank you! Print Settings Printer Brand: MK3, Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…
This adapter is based off of the other universal microscope adapters, which didn't use M3 bolts or have the ability to easily set the distance between the eyepiece and the camera. This is my complete redesign. I have also added another…
All files are in .3mf (because its far superior to .stl). Thingiverse requires a .stl file though, so I added my retraction calibration .stl to the list. Anyways, took ekaggrats .3dm file and heavily remixed it. Solid rack so that print…
This mod addresses some useability downsides with the dual M5 screw movement of the standard module. The independent rack and pinion movement for x and y prevents the binding issue of the two interconnected knobs, and the new gears…
I remodeled the original model to make it much more sleeker and use a lot less plastic. there are two slide models . depending on the calibration of the printer one is a bit tighter than the other. you need m2.5 x 6mm x 5 thread inserts…
CMF Phone 2 Pro + CASE by Jon Prado Follow me, leave a comment or message me for Design Requests/Add-ons to this project or to collaborate. The inspiration behind the Design is a focus on Self Expression, Modularity and Utility. About the…
As you may know, microscope arm is stupidly expensive. So I design this for an alternative, for the pipe I use a cheap monitor arm that has diameter of 30mm. I also design the holder to be compatible with 25mm(1 inch) and 32mm(1 ¼ inch)…
A small box for working with microscope slides. Designed to hold 10 slides (75x26mm) and 10 cover slips (24x24mm). Four receptacles for 13mm dia' vials. Removable dust cover to keep slides clean, and can be used as slide mounting surface.…
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
project based on research from me (@V_saggiomo) and Benedict Diederich (@beniroquai) *update April 2023 - we are testing external (battery-powered) LED. These LEDs are usually used for decorations, can be on for 2 weeks, and are quite…
ACTUALIZACIÓN 3-4-2024: Añado un soporte extra para accesorios (leds, pinzas, etc) donde se pueden roscar dos tornillos de sujección. Hay que usar dos insertos para 3 mm. He diseñado un sencillo soporte ajustable en altura para mi antiguo…
Just combined 2 projects from here to fit the necesities of my usb microscope, its fully printable, needs no support and added some changes to fit on printer area of 190x190mm, also modified the base to be a little more flat, and smaller.…
I printed the original stand, but it was too wobbly and jank, so I remixed it. Parts needed: 2x M4 countersunk screws L=12-20 mm 4x M3 countersunk screws L=8-12 mm 2x M3 button/socket head screws L=12-20 mm 2x M3 countersunk screws…
C/CS Mount Extension Tube (8mm to 65mm) for Microscope, Raspberry Pi HQ Camera, TV Lens, Macro, etc. Print at 0.1mm layer height for best results. No supports needed for printing. May need brim when printing long extension tubes.…
Start by making my 4x microscope adapter for your camera: https://www.printables.com/prints/143754-microscope-adapter-for-4x-macro-photography-with-s Then add this particular 4x objective (only this one is supported) to it:…
The second version of the “matchboscope” https://www.printables.com/model/412753-esp32-microscope-matchboxscope Here we introduce the ESPressoscope, a microscope as big as an espresso cup :) We moved away from the ESP32-Cam and are using…
I remixed this to use M5x20mm button head screws, as I didn't have any M5x30mm bolts. For hardware, you'll need 4 x M5x20mm button head screws and 8 nuts. Be sure to tightly screw one nut onto each M5x20mm screw (adding some Lock-Tight is…
Enhance Your Lab Organization Effortlessly Perfect for any laboratory, this design is available for free download to help you keep your slides safe, accessible, and well-organized. Key Features Durable and Lightweight: Ensures a robust,…
Modello portachiavi a forma di microscopio stilizzato
Andonstar AD407/AD409 soldering microscope mount for Rode PSA 1 microphone boom arm. Re-use the thumbscrews from the original mount to attach this mount to the microscope, then attach to the microphone arm, see photos for my setup. PLA or…
Stackable tray to hold microscope slides on their long edge. My intended purpose was to be able to hold/store slides that have pre-cut tissue controls for easy access during microtomy. There is an area at the front for a label to identify…
Designed to attach on this Canon EF/EF-S Adapter With Screw Holes . The Canon EF/EF-S adapter extends the mechanical tube length (MTL) slightly, and makes the spacing between the Canon sensor and the flange of the microscope objective…
if your lens are heavy, use the type A mount. Use type B if your lens are lightweight. for BOM, LOOK AT THE CAD! I won't provide guide. should be easy to understand. for the lens mount, pinion, rack and knob, get it from the original…
A set of "filters" to be used as 32mm darkfield filters for microscopes Category: Parts
I created this stand to hold my cell phone steady while viewing dates and mint marks on coins, but you can use this for anything you need to zoom in on. The phone tray is sized for an iPhone 14 Pro, but should hold many different brands…
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…
Revision 0.6 - RMS male better toleranced, Z axis up, add height and logo, added M25 This is a set of parfocal extenders and adapters for microscope objectives. 1) They have RMS thread, both male and female. It is also called "DIN"…
Awhile back I acquired a digital microscope and found the default base that came with it incredibly useless. I had acquired the microscope after reclaiming some one GameBoy Colour games from my childhood home, and needed to do some…
Vytištěno z materiálu PLA, výška vrstvy 0,25 mm. Pro zuby hřebenu, pastorek a osu výška vrstvy 0,15 mm. Matice přilepit do jednotlivých dílců dle výkresu. Výkres sestavy stojanu (výkres ve formátu pdf uložený v souborech): Typ mikroskopu…
You can find all other parts at the original project: https://www.printables.com/model/48589-modular-stand-for-electronic-microscope
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
This is the spacer needed to attach this objective https://www.amazon.com/AmScope-Plan-Achromatic-Objective-Knurled/dp/B01G4CCGRC/ to a Nikon F-mount camera. Lets you take 4x macro pictures. to read a review of the objective check here...…
A colleague needed a box for microscope slides and found this model first: https://www.printables.com/model/810152-microscopy-slide-box . It worked sufficiently, but after some usage, the following we needed some adjustment according to…
These little eyepiece covers sit on top of your eyepieces, preventing dust from falling on them while idle. Print flat, so that warping is limited, and they should print with no problem.
DEPRECATED! User @morpion on discord came up with a simpler and more practical idea which is currently published on github here: https://github.com/XVIIarcano/Galileo-Microscope/tree/main/Mods%2FOptical%2FAccessorized%20focus%20knob If…
Just a handful of filters. 32mm * 32mm * 1.5mm
I have been developing this for quite some time now and I feel this is the right platform to share my design with the world. I am also very proud to share that this ‘Mobile Microscope’ was shortlisted as one of the ‘Top 6 entries from…
20 mm rheinberg, oblique illuminsation and dark field filters The dark field filter makes that only light that has crossed the sample enters the objective. This creates a dark background with bright objects. The rheinberg filter is like…
Project: 3D Microscope in Separate Parts This project is a remix of the original microscope model created by @medinad654 on Cults3D. The original model, which you can find here , was designed as a single piece. This modified version aims…
This is a print-in-place telescoping Microscope adapter for Nikon crop DSLRs. It telescopes from 2.75X to 4x magnification To see how to assemble it visit: https://youtu.be/MEB0Ze5Yfpc It uses this $20 microscope objective:…
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
Most of the affordable electronic microscopes are very low in image quality and functions. You can use your iphones magnifier function with this stand for a cheap but high quality microscope. All nuts and bolts are M3.
I really enjoyed this awesome design from BraunsCNC but I wanted to make some modifications for the Raspberry Pi 4 and less restriction on purchasing manufactured components vs. printing them. Unfortunately, this project doesn't have…
In education you often had to clean a lot of microscope slides after a lesson. So its good using a dishwasher for that. A holder for 30 slides make it easier. USE PETG, because the temperature in a dishwasher is higher than 60°C!
With this adapter you can mount your Andonstar Digital Microscope to a regular microphone boom arm, which allows you to move it much more freely. I've used this with my AD246S-M, however I would assume other models also fit, given they…
This mod only replaces the design of the base module adding some internal space, screws for the rubber feet and for locking the pipes are unchanged froom the standard version. You will need: - One set of printed parts, printed using the…
I printed out some 32mm darkfield filters for our Swift 380T microscope and I quickly realized we were going to need a good way of keeping them safe and clean. I noticed the customizable coin cell battery case and realized it would be…
Hi fellows, i am using a digital microscope with a LED Ring for repairing and reworking. The LED Ring comes always lose and is falling down. I got annoyed of it and made distance spacer to press fit it onto the microscope. The outer…
I recently bought a microscope for some fine soldering (SMD and such). It came with a ring light which can be clamped onto the lens of the microscope. I didn't like this method of screwing bolts into the side of the lens, so designed an…
This is good for common microscope lenses with 120 degree spaced mounting holes. I think i used M3 screws for this, but just figure it out yourself. I found bunch lying around for it, so can't remember what kind. Anyway happy to hear…
My digital microscope came with a handy metal base, but I figured I could use more flexibility and opted for an articulated microphone mount This adapter lets you connect both together My scope has no name, but it appears to be a pretty…
A knob for M5 30mm coach bolts and a mount for usb microscope. see https://www.printables.com/model/48594-usb-microscope-adapter-for-modular-stand
Holds five microscope slides at the same time to stain them in Coplin Staining Jars. Created interchangeable handle
There are great tripod screw mounts for cameras. There are interesting solutions for having overhead camera mounts for youtubers and twitch users. So let's use these solutions to free up space for soldering with the Andonstar microscope.…
Microtome is typically used for cutting very thin film layers of a specimen for microscopy. Inspired by Low-cost Handheld Microtome I prepare 2 versions of body with space for metal Washer M10x29.5x2.5mm with Washer space filled Model is…
Small box to store up to 5 microscope slides of 75x25mm with a thickness up to 1.2mm. The box features a sturdy construction designed to protect delicate slides from damage. It comes with a secure-fitting lid that ensures the slides…
I needed a simple slide box so I decided to make one. The lid fits loosely on top so when you open it you dont accidentally throw slides all over the place. Holds 25 individual slides. (Ignore the dusty slides, thats how they came lol) If…
The original Model and the rest of the needed files for the complete assembly are found here: USB Microscope Stand by D.McReynolds | Download free STL model | Printables.com
English Below La boucle de support de mon microscope numérique à cassé. Voici la pièce imprimée qui remplace avantageusement l'original. Refaite quasiment identique à l'originale en un peu plus large et enveloppante. Elle s’imprime à…
A rudimentary smartphone mount for a micro/stereoscope. The clamp is designed for an ocular with an outer diameter of 31-34mm. After seeing several microscope smartphone mounts I simply wanted to try without commitment (that is, least…
I made this for my brother's TOMLOV DM09 which has a short stand. I understand the microscope and mount are rather generic (Hayve, Leipan, etc.). So maybe it will work for your microscope too. The threads are pretty small so you'll want…
I designed these mounts for the Andonstar microscope to be able to mount it to a TV Vesa style boom arm as I found the base of the microscope was too small for what I required. The main one which Scopr-mount.stl attaches to…
This is an adapter to mount the Andonstar ADSM302 microscope to a microphone stand/arm The hex opening is for a m10 nut. Most microphone arms will fit, I just replaced the imperial bolt to a metric m10 bolt on mine. Some disassembling and…
Argus — Motorized Microscope Focus Stacking Machine Argus is a motorized microscope for focus stacking macro photography, built almost entirely from the guts of old 3D printers. Focus stacking is the headline, but the motion really helps…
Remixed to fit my PZO scope which has 31.5mm diameter objective lenses - the internal diameter of this part is 31.4, for a snug stretch fit when printed with flexible filament. Print instructions Category: Parts Summary Remixed to fit my…
This adapter supports an Olympus TG-6 camera on the eyepiece of a microscope. The tube fits around the camera lens when the front-ring is removed to avoid any light leak. It can work with eyepieces from 26mm diameter and with the larger…
Wanted to clear up desk space and mount the scope to a monitor arm instead. You'll need to find a bolt that fits the back of the scope mount that's moved over to this vesa mount. I suggest you use a pick to pull aside the clamping spring…
This is the amazing OpenFlexure microscope V6 design - reproduced on printable for the purpose of knowledge distribution. The original and latest versions an be downloaded from the project website…
A box and lid for holding up to 40 microscope slides meant to be printed in vase mode. Fits on most 3D printer build plates. Not recommended for use with samples that suffer from atmospheric, UV, or plastic exposure. There are two lids:…
Buy attaching a cheap $15 microscope to your phone, you can take amazing microscopic images and videos and share what you see with those around you. This attachment prints with no supports in two pieces which are then glued together. Once…
Just a slight customization of this cool key chain ornament. Print instructions Licence: Creative Commons - Attribution Category: Learning
An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar). The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the…
I remixed SovanChoi's excellent 2x2 Gridfinity drawer to use a standard microscope glass slide as the front window. The window is also a little taller, but still fits a ~4-6mm label
This is a RMS to C-mount microscope objective adapter. IT allows to connect objectives directly to a camera with C-mount. The thread tightness is variable and can be changed in the parameters. Modify/Change Parameters. If you use this…
For taking sharp snaps of what is viewed in the microscope. This little spacer helps you to get a adequate distance to the eyepiece so can a sharp picture. Please view the pictures to get an idea of how it is used. Print Settings Rafts:…
I have few microscopes and many eyepieces. I was tired of having eyepieces lying around or in plastic bags. I designed a case that stores 2 eyepieces for biological microscope with diameter of 23,2mm. Usually for older Carl Zeiss Jena,…
The stand that came with my USB microscope is very unstable. This adapter mounts the microscope on a standard ¼"-20 hex nut. Microscope: https://www.amazon.com/gp/product/B07DRGR6LX/ ¼"-20 hex nut: https://www.mcmaster.com/92673A113/ The…
Follow the original maker's assembly instructions. https://www.printables.com/model/1067197-stand-for-cheap-usb-microscope Once the microscope is in, carefully clip the zoom adjuster wheel in place.
I wanted to make a soldering microscope that is freely positionable over the work. So I modded my generic digital microscope with 35 mm tube. You need 2x(M4 nuts and bolts) and might use some washers for ideal spacing. Please print with…
This is an attachment that you can print to fit a G600 microscope to this microphone desk clamp/stand: https://www.amazon.nl/dp/B01N0IYZVE/?th=1 Print the Clamp twice, as you'll need one on the top and bottom. There's 2 versions of the…
This is a simple extension bracket for the Andonstar AD407 microscope. With it you can put larger PCBs underneath it. I recommend you also upgrade the table. Should be an easy print, no support needed. I used 20% infill. For mounting you…
