2,059 models
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Round version of the eye is added Project file added G-code file added
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :) model on GrabCAD by Joshua VanName. https://grabcad.com/library/the-lamborghini-terzo-millennio-concept-car-1
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Just glue the front and the body.
I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…
Printet on a Original Prusa i3 Mk3s+ using PLA 0.4 nozzle, 20%infill 0.3 mm layer hight
Needing boxes for my homemade taps, I searched for a simple solution, but ended up making a new design. The box is two part - bottom and lit with simple hinge and lock. The shown boxes is printed in PETG but other filaments can be used.…
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Water Mill / Sand Mill Colorful little mill for endless playtime at the beach, pool, or sandbox. Simply assemble all parts. Dimensions Height 200 mm Width 100 mm Lenght 100 mm Settings: 2 perimeter 0,2 layer hight 15 % infill no support…
Should probably fit any pepper mill with a ø25 mm opening. Print in vase mode with 2 walls
Windmill leaf with 2x2 lego brick at the end.
Note [April 28, 2024] : See the remix below for a version with a stronger crank handle : https://www.printables.com/model/861178-mill-vise-speed-handle-remix-modified-crank This speed handle was made for the 4" (100mm) vise I use on my…
This mod changes the axle and the rod of my Windmill Designs to a horizontal print! You can print now all parts horizontal with a press fit connection, to make the whole Windmills "ultra stable". Assembly:…
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…
These pepper mills have a base diameter of 50 mil. The print file is for the Prusa Core One and I used the fuzzy skin option, which gives a really nice finnish. But of course you can slice your own from the.stl file. Pepper mills bought…
Salt n' Pepper mills holder. Esay so print. Little XMAS present for a friend who produces very delicious chilli smoke salts. =) Fits up to 4 of theses salt/pepper mills with ~67mm diameter. Each holder circle has 70mm diameter. I use over…
This small tray holds your pepper mill, so the loose pepper dust doesn't end up on the counter. Includes a recess where pepper dust can go into and still allow pepper mill to seat fully in the tray. Designed for a Peugot Mill 55mm…
I always struggled filling the Peugeot salt grinder/mill with new salt. So I made this funnel that fits exactly on top and makes it very easy to fill to the brim. No supports needed when printing. I printed in PETG, but will also work in…
An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…
Practical holder (menage) for a salt and pepper mill – ideal for the kitchen or dining table. The mills stand securely and neatly next to each other and are always within reach. I printed the cruet set using extrudr PLA NX2 MATT . For…
Just a simple spacer to go on the 1" shaft of horizontal mill. I made it for a thin saw where the keyway sticks out on either side. Print in PETG at 30% infill, .20mm layers and no supports. I used 3 perimeters
After the failure of the original connector, I designed a very similar one, but smooth inside, which prevents sawdust from getting stuck inside. Print as in stl. There is no need to use brims or supports.
To prevent spills falling out of the Skeppshult pepper (casting iron, ceramic and beech tree) mill you may need this coaster to keep dinner table clean. This protection will be keeping attached to the mill when you pick it up. Just remove…
Trychtýř pro mlýnek na pepř. Funnel for pepper mill.
The Temper station replaces the Lid of an Eureka Mignon Mill with a Lid of 120mm x 120mm. It has place for a Temper, Leveler, Brush, blind screen all fitting to a E61 groupset (58mm).
My Best Six Million Dollar Man Plate. Variable layer height also required uses two layers.
The Six Million Dollar Man Head Eye Side View. Dual layer design.
The Six Million Dollar Man Logo, Dual Layer with variable layer height base.20mm & text.10mm. ENJOY!
I used inkscape and copilot to helped create the svg codes and the put it into slicer and merged the items
This model was featured on The 3D Printing Nerd Be sure and Check out this awesome video by 3D Chill with super clear assembly instructions ! We love the Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 Inspired by benzz88's…
Originally published here on Thingiverse . This was made with MATLAB R2016a in a similar way that of other astronomical bodies, plotting a topographical map on a spherical projection. I could not find a good, detailed and free…
Millennium Falcon Scale 1:500
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Ever wanted an articulated millipede toy that you could 3D print and not need any supports or any assembly and works straight off the bed? Well here he is. FDM millipede printed in Snolabs Black Amethyst PLA+. 2 layer height, 10% infill…
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
Original part : https://www.thingiverse.com/thing:2815721/files
I stumbled across this awesomely detailed Millenium Falcon surfing the net one night. I believe it was extracted from a game, as it was in some obscure file format. I've tried my best to convert it here in a couple of file formats. But it…
Easy to print yet very well working pinwheel, looking more like wind turbine. It uses common bearings easy to find in DIY stores or in sport equipment stores (they are used in roller skates). All parts fit into 18x18x18cm volume printer,…
Patch notes 23/04/2025: Uploaded collum.stl (whoops, that's an important one) This is the v.09 release of my milling machine. Its complex and may or may not be worth your time making. I'm being very honest about that, this mill is a…
Toroidal Windmill - Self adjusting turbine Looks like a spinning flower and no much wind is needed. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms,…
An awesome video from the 3dprinting nerd! Here is a link to detailed instructions: https://docs.google.com/document/d/1KDRXu7u-fEv7_Fu8X6EB74nruDYoBuEng44OES5XB0Q/edit?usp=sharing Print Settings Printer Brand: Bambulabs Printer: Bambu…
Alignment pegs guarantee precise positioning during assembly. All components are printed without any support, raft, brim, or infill. Printing at the standard size produces a model with dimensions approximately 131mm wide by 191mm long.…
This is a 10 cm by 7.5cm model of the Millenium Falcon. Easily printable, prints best with support on the underside. Print with the bottom of the ship on the bottom of the bed. Happy flying, Rebels! Print instructions Category: Models…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
This is more of a build log than direct instructions - I wanted to share design decision I made - maybe it will help someone in whatever they will design. However if you are crazy enough to build one - here you should find all the…
These are the print files so that you can print and build your own Simplified Millennium Falcon “Brick” set! I've included a .3mf file that I used to organize all of the print files by plate/color and scaled mine up to 400% of the…
Ok I have managed to get the Falcon created by Jace to print, I am not sure why - but for some reason (possibly the file size of 103MB) it is not showing in the preview images. However it should be in the file list. I will update this…
The Double Spiral Windmill - Self adjusting wind turbine YouTube Short This is the next customizable windmill design. Two confusing double spiral propellers, which rotating in opposite directions. I colored the bottom & top layers with…
Custom bracket to mount the UCS Millennium Falcon 75192 to the wall in a vertical position. All other ways I've seen to mount the set in this position have used wood and the final versions were not perfectly secure. This 3D printed design…
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions…
Interchangeable Corner Rounding Jig Set (R5 - R40) This modular guiding system is designed for woodworkers and makers who demand perfection in every detail. It allows you to create flawless, burr-free curved edges on panels by guiding the…
Originally published here: Earth with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse These models were made using MATLAB R2016a with a topographical map of the Earth, including the seafloor. Like other models…
Universal Clamp for Windmill -> New Heavy Duty Clamp On the top Site it has a hole to fit perfectly the rod from Hexagon, Toroidal and easter Egg Windmill. Use the screw clamp to securely attach the wind turbine. For example, to balcony…
Inspired by fixumdude’s Snowflake Tie Fighter , I downloaded Maxime’s Millennium Falcon model on GrabCAD, modified and redesigned it for better printability and added a snowflake cutout, using a snowflake design from Lia Aramburu . If you…
Bring balance to the Force and your windowsill with the Millennium Succculum — a 3D-printed succulent pot inspired by the legendary starship itself. This compact freighter-turned-planter is perfect for housing your bravest little…
Found this made by someone in a facebook group, no stls so here you go. edit: as some people have mentioned, some parts are not to scale, please scale the tiny parts by 1000% This took me a while to put together so please feel free to…
Bring the galaxy's most legendary smuggling vessel to your desktop with this incredibly detailed Millennium Falcon 3D print STL model! This iconic starship figurine captures every surface detail and panel line of Han Solo's beloved…
Fan of the Millenium Falcon, I designed this keychain with Fusion 360. It is 6.5 mm height and 45 mm lenght. As you can see I mixed white and black filaments. For those who wants to edit this project you will find the .f3d Autodesk Fusion…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…
I was inspired by the millennium falcon tube holders from AtomicVirology (https://www.printables.com/de/model/114530-millennium-falcon-tube-holder-improved) and CFell…
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
🚨 FUNDING GOAL REACHED – THANK YOU! We’re thrilled to announce that we’ve officially met our funding goal for the Millennium Machines Milo V2 launch. Your support made this possible — and we couldn’t be more excited to take the next step…
Updated on 7-29-23 - Y Axis plates & drill guide (.stl .dxf .pdf) It can be made with (Mdf, 3d Printed or Laser Cut) "Just Follow This Post For Updates" I will have all the plans done soon but for now i will upload the end plates (.dxf…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
NOTE: This kit card was prototyped and designed for Bambu Lab printers using Bambu Studio. As such, I don't know how it'll print with other printers. My .3mfs can also be opened by OrcaSlicer and you'll find size variations in there.…
As the name states, it is a boomerang shaped like windmill shuriken from the Naruto series. The model is a technically a reversed shuriken, as the “sharp edge” (i.e. silver edge) will not hit the target when it spins. I've tried to model…
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
I got the dark millennium falcon (75389) and wanted to mount it flat on the wall like my other version. They changed the landing gear on this set which did not allow me to use the existing mount design. This allows it to be mounded at…
Just for learning to model Objects ;-) You need: 3 x M3 Squarenuts 3 x M3 Screws 2 x Ballbearings 1 x Motor/Generator Update 22.05.2018: added a Baseplate with mount for a pipe Print instructions Category: Buildings & Structures Print…
need a bar 8 mm outer diameter, minimum 175 mm length. Rotational axis is actually a 30 mm long M5 bolt: Two kind of clamps are provided: square (max 35 mm height) and circular (max 40 mm dia): All the hardware needed: 8 mm outer diameter…
I couldn't find this exact model here so I brought it over. https://www.thingiverse.com/thing:919475 Photos are Prusament Galaxy Silver PLA.
Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…
Sunflower Windmill inlay cover I get some request for a single color opportunity of my Sunflower Windmill . I came up with this easy solution. Just print the cover inlay in black and press / glue it into the yellow printed sunflower…
"She'll make point five past lightspeed." ―Han Solo The Millennium Benchy - for those looking to add a bit of the force into their prints. Print at a 45 Degree angle, balanced off the flat part of the tail as shown in the photos. My model…
This is a model of a 40mm end mill, which rough dimensions were taken from a real life 20mm end mill. This was a gift for my fellow CNC-machinist student for completing his apprenticeship.
I made this Armillary as a git for my Godson who is really into Astronomy (planets and stars and such things). There are several fine examples out there, just wanted to make my own. This Armillary includes Lunar Sol transits (purely…
I found this model on GrabCAD by Joshua VanName. https://grabcad.com/library/the-lamborghini-terzo-millennio-concept-car-1 It's an awesome model but not at all 3D printable. It took a long time to make it 3D printable, but I finally…
Simple parametric cable chain designed for IndyMill CNC machine. There are two versions, 20mm that can be used with 2020, 2040, 2080 and so on aluminium profiles and 40mm version that can be used with 2040, 4040 and so on profiles. Thanks…
Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…
Not only are these windmills a rotating piece, but they also serve as a decorative objects with unique, organic forms characteristic of Moebius' art. The model is an elegant addition to gardens, balconies, or any area where you wish to…
..:: РУССКИЙ ::.. Приспособление для снятия фаски в ГВЛ (Гипсокартон) для углубления подрозетников. Для использования необходимо прикрутить два трапецевидных лезвия с отверстиями:…
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
This is my version of the Millennium Ring from yu-gi-oh, it's roughly to scale but is made to look good in person and be easier to make. I included a few different ways to print the pieces some are easier than others depending on your…
I first created this model when a friend wanted a Millennium Rod for his cosplay. I saw a few models around but did not like how they went together. I also wanted to add an LED so the eye glowed. I made this model from scratch using…
Little fun win catcher, modeled as an airplane There is models for single colour and multicolor with different hole sizes(7-14mm) in the bottom for attaching it to something like a fence post Settings Main body requires support under the…
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions large…
I whipped this small test design up to check the dimensional accuracy of my printer. This will print circles and squares of various sizes as holes and towers that can be measured to verify accuracy and determine any dimensional…
https://www.thingiverse.com/thing:4665052 provided a single piece model that was too big to print on Prusa MK3S, so a cut the model using Shapr3D on my iPad and added assembly points, supports, and cross-bars that use M3 screws and nuts.…
3D printable LOGO of Millennium school LOGO and Veritas Club LOGO form BLUE ARCHIVE
A stand for the Lego Millennium Falcon, remixed from https://www.thingiverse.com/thing:4790242 to fit on a Prusa i3 M3s+ buildplate. Basically I removed 1mm from both sides of the base, which doesn't really effect anything. If you are…
Do your midipreps using the fastest hunk of junk in the galaxy. This tube rack holds 50 mL conical centrifuge tubes ("falcon tubes"). The base and attachments have been redesigned so that the model has minimal supports and it clicks…
Because this cosplay requires a wig in my case, I added hoops to sew the horns onto the wig and that way, I didn't have to deal with a headband or clips or anything unsightly. The print is super straightforward. No supports needed, just…
Lightweight, small foot print organiser for CNC end mills and router bits. Designed to hold up to 24 bits in a tool drawer or on top of your work surface. Honeycomb infill lets dust and debris fall through the bottom for easy cleaning.…
