980 models
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
Um geplante Werkzeughalter am Prusa Mini+ zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PETG, aber PLA sollte auch gut gehen. 15.06.2024: Modell zum Selberschneiden des M5-Gewindes hinzugefügt.…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Hier kannst du dir eine Abdeckung für deine Mutter drucken. Ausgelegt ist die Abdeckung für SW17. Du kannst diese Abdeckung jedoch problemlos auf jede beliebige Größe skalieren. Viel Freude mit dieser Abdeckung ich bin sehr zufrieden.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Turning knob 35x15mm for an M5 screw inside and outside the nut Drehknopf 35x15mm für eine M5 Schraube innen und außen die Mutter
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
The model has been designed for a multi-color printer, but it's easy to limit printing to a single color by printing only the Dodecaedre v9.STL file contained in the Dodecaedre v9.3mf project file. For moncolor, all other STL files must…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for PETGSource material: PET
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
PG7 threaded blind stuffing to close unused PG7-openings in housings. [1] Thread type: PG thread [2] Diameters for PG7 opening: a) threaded hole: 11.3mm / PG thread b) drill hole without thread: 12.5mm [3] Sealing: An optional TPU-sealing…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Für die Montage braucht Ihr einen Kabelbinder (140x3,5mm, 1,2mm dick). Gewinde M20x1,5 braucht keine Nachbearbeitung. Schlüsselweite 30mm Konturen → 3 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Nur für…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to use my external monitor in portrait mode but couldn't because it has buttons on one side and and the USB-C cable goes in the other You probably want to print 3, 2 to balance the Arzopa + a spare
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Schriftzug mit Herzen, "Alles Liebe zum Muttertag" Größe: 23,7 cm x 11,5cm x 3cm Update: Bohrungen für LED hinzugefügt Bitte nach dem drucken hier ein Make hochladen... Vielen Dank
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
PG48 threaded blind stuffing to close unused PG48-openings in housings. [1] Thread type: PG thread [2] Diameters for PG48 opening: a) threaded hole: 57.8mm / PG thread b) drill hole without thread: 59.3mm [3] Sealing: An optional…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Deaktiviert die lästige Frage im Fahrzeugdisplay nach dem Anschnallen hinten und dem OK bestätigen. Drei davon drucken, hinten in die Gurtschlösser stecken und es ist Ruhe… Meine Lösung ist klein und geht “um die Ecke”, damit man sich die…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
M63x1.5 threaded blind stuffing to close unused M63-openings. Unused PG48-openings in housings are also possible to close with this blind-stuffing set, but the opening must be widened to >63mm for the blindstuffing to fit. [1] Thread…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
8-sided role-playing dice numbered 1 to 8 in Eladrin and small numerals. The model has been designed for a multicolor printer, but it's easy to limit printing to a single color by printing only the Octaèdre.STL file contained in project…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Die original Flügelmutter unserer Pastamaschiene ist gebrochen. Nun habe ich in Rhino eine neue modelliert und ausgedruckt…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
ein einfache Rändelmutter zum einlegen einer M6 Mutter und einer Unterlegscheibe bei den Pausen des Drucks. Darauf achten das keine filamentrest die mutter oder die Unterlegscheibe erhöhen da es sonst zu kollision kommen kann…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
This is a redesign of ZODIAC's Y carriage bearing holder from LMU8 to LMUT8 bearing. Shortened to 20 mm wide, lowered by 0.8 mm, and the grooves redesigned to one in the middle to fits for LMUT8 bearings. Tested on MK3S+ 100% infill and…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Diese beiden Anschläge werden magnetisch am Fest- und Loslager der Z-Achse der Volksfräse VF1 hinter der Spindelplatte montiert. Sie schränken das Spiel der Kugelumlaufmutter nach oben und unten genau um die Längen ein, dass die…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a ball-nut / sphere-nut replacement with a M4 thread. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.1 mm Fast Detail Material PETG / PLA Supporting Material none , brim Comments printed on MK4 with MMU3…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
I remixed the fan mount to get the fan duct into just the right position for a E3D V6 setup. The original model was a little offset and not low enough. My 12v setup struggles with heating if the fan duct hits the heater block at all so I…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Highlights: Passgenau für M5 (DIN 315): Exakte Schlitzführung mit praxisnaher Toleranz gegen Verkanten. Kompakte Maße: 52 mm Gesamtspannweite – ideal für enge Winkel an Rahmen, Booten oder Geräten. Solide Geometrie: 6 mm Bauteildicke für…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
MICHELANGELO TMNT REMIXED
Raphael (Teenage Mutant Ninja Turtles) support removed from original
LEONARDO TMNT REMIX
Donatello re-mixed
Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now. ____________________________ Updated 20230605 I separated the body into 2 parts, now it is…
Eine Rose mit dem Schriftzug Mama. Vielleicht als kleines Geschenk zum Valentinstag oder Muttertag.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
All of these mutes have been played and tested. The sound is similar to the stone lined mutes. In this generation I've thinned out the walls and opened up the stem holes to make them a little brassier and louder, especially on the bubble…
Herz mit Sockel zum zusammenstecken
WHY? I love my BambuLab X1 Carbon, yet it makes a hell of a noise. I do not have a basement or garage to put it in, so it needs to quiet down. Slowing down the chamber fan in the print profile has a huge effect, but I needed more. So, I…
Diese Spannmutter gibt es von Gardena nicht als Ersatzteil. Also habe ich mir selbst eine gemacht. Falls sich die Mutter nur schwer aufschrauben lässt, kann etwas Silikonspray auf das Gewinde gesprüht werden, damit geht es dann leichter…
In Egyptian mythology, Duamutef was one of the four Sons of Horus, tasked with protecting the stomach of the deceased. Represented by the Jackal, he is the guardian of the East. This model is a stylistic recreation of a museum-style…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
Print the wings with the tips of its fingers facing the sky and a ton of supports. This means the thumb is facing downward, so make sure your support game is strong. You can also try printing it as is, but I wouldn't recommend that given…
Eleganter Rosen-Teelichthalter für LED – stilvolle Tischdeko für jeden Anlass Diese wunderschöne Rose im 3D-Druck-Look bringt stilvolle Romantik auf deinen Tisch. Perfekt als Deko für Wohnzimmer, romantische Abende oder als besonderes…
Geschenkebox in Herzform mit "Happy Mothers Day" Beschriftung einmal in 20mm Höhe und einmal in 30mm Höhe If you like it ----> press like it :-)
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
These knobs are perfect for making your own star grip nuts or star grip screws. They are designed for metric screws and nuts with thread sizes M4 – M12 . The different versions and their dimensions are listed in the documentation. After…
Nicht AMS-Version: Das Filament muss für schwarze Schrift auf 1.5mm und für das rote Herz auf 1.9mm höhe gewechselt werden.
This is my variation of ANicolai's “ Mute for Violin and Viola .” Printing in various PLA+ as oriented without support. .16 layers, 4 walls and 80% infill. We tested these against an actual an metal practice mute. It actually stacked up…
UPDATE: Ignition is confirmed to be the same height as Under Needle and a NEW VERSION is made under this new information. V3 Is now at the accurate height of 27.6mm Now it has been confirmed that Bahamut Blitz's bit is called 'Ignition'…
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin. You will also need the Body v2.stl from RxR 's multi joints for Lucky 13 model. Assembly of the head is pretty…
Dragon Ball home decor
The Loop Earbud Carry Case with Mute Storage is a compact accessory designed to keep your earbuds safe and organized. It features a unique lid that securely holds Mute rings while protecting your earbuds from damage and dust.
A simple clip designed to block the whistle of a recorder. This reduces the volume significantly and the user can still (somewhat) make out different notes. Alternatively, you could shove your finger into the recorder while the player is…
This model prints best with a resin 3d-printer but works also with FDM. Cowabunga! Juri
About An attachment that holds Loop Mute rubber inserts, compatible with original Loop Earplugs case. I have always wanted a way of carrying the Mute rubber inserts to further reduce noise when needed, so I designed this attachment that…
Drucke das Modell hochkant und aktiviere Support bis zu einem Überhangwinkel von 45°.
All four Teenage Mutant Ninja Turtles
Beautiful mammut stool from IKEA. Elegant and beautiful If possible, place the floor of the stool on bed.
Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…
Simple test print to give you enough layers to check out up to 5 materials at once. It's 1 cm tall and you can scale it larger if you want it. Update 12/13/2018: Added Solid version (FlowerSolid.3mf), prints faster without the inner…
Da ich keine passenden Muttern für die Gewindestange (für eine DIY FilamentBox) hatte, hab ich mal kurz selbst welche entworfen. Am Anfang gehen die Muttern etwas schwerfällig aber wenn sie einmal drauf sind, kann man sie gut drehen. Ich…
Bobblehead from a scan of a classic TMNT figure for use with 3D Printy's bobble head spring and base Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I used…
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
Based on Sound-Maker's idea for a 13mm/ 1/2", I designed a Gardena nut for the 19mm/ 3/4" system. I have tested the nuts with some hoses and also hose connectors and it works fine. I noticed that some threads are smoother or different…
StarCraft_Mutalisk_Fanart by Binhou. https://sketchfab.com/models/c6f44d4309cd46379e1eadd9d79453d5?ref=related To make Binhou's sculpture more printable I have thickened the wing membrane and split the model down the middle. The two…
Here we have a so-called star grip in size M5, M6, M8, M10, M12 and M16. Hier haben wir einen Sterngriff für die Größen M5, M6, M8, M10, M12 und M16.
Remix of JesusFreak vented riser. Split into parts to allow printing in different colors. The vents (blue) slide in the bottom and then the hole is plugged with the plug (red) by gluing the tabs at each end. The handle/toggle is designed…
This design is a 3d model of the classic Teenage Mutant Ninja Turtles manhole logo as well as the newer TMNT style. The prints are separated by color and everything should press-fit together. The only part that might need supports is the…
The standard SAMLA Hat by Beaverworks wasn't quite what I wanted so I made my own! This version sits flush (or as close as I could get it) with the top of the U1, It therefore also doesn't cover any of the sides. It also comes with half…
Eine Schraube mit rundem Gewinde und dazugehörige Mutter mit gerendelter Oberfläche zum direckten Drucken. Brim und Stützen sind nicht nötig. Ich habe nun diese Schraube in Petg (schwarz) und PLA (Gold perl) gedruckt die Schwarze mit…
Choose a color for the mask, one layer of red for tongue, the last layers for mask (in any of the colors).
A simple and useful muteflute Printed at 0.4mm nozzle and 0.2mm layer quality with eSun petg The gcode file is for an Ender 3 V2
Is it dumb? Yes. Am I dumber for making it? Maybe. Now you can enjoy the weirdness of the Mutt Cutts van from the movie Dumb and Dumber. Relive your favorite moments with Lloyd Christmas and Harry Dunne. It will not tell you what the most…
Use to mute seat belt, only use when you are not sitting it and not to replace the use of a seatbelt.
Eindrehbare Hammermutter Nut-8 M3 mit Sechskantmutter M3 niedrige Form (DIN 439), passend für Aluprofile zum Prusa Mini und MK3x. Für leichte Anwendungen geeignet. Anzugsdrehmoment ca. 1Nm. Gedruckt mit einem meiner bevorzugten…
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
a like is not a crime ;) Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 760mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
Um ein Handy als Kamera am Prusa XL zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PLA, aber PETG und andere sollten auch gut gehen. To mount a cell phone as camera on my Prusa Xl I need some hammer…
Introducing the Seatbelt Muter, a cleverly designed 3D solution that effectively silences the persistent and bothersome seatbelt alarm in your vehicle, especially when carrying a heavy bag. While this adapter is created to enhance your…
Drehknauf ( Ø ca. 35mm) mit eingesetzter M6 Mutter Drehknauf ( Ø ca. 28mm) mit eingesetzter M5 Mutter Drehknauf ( Ø ca. 20mm) mit eingesetzter M4 Mutter Turning knob ( Ø ca. 35mm) with inserted M6 nut Turning knob ( Ø ca. 28mm) with…
Mutated zombie stalker from the Zone, wearing tactical gear, perfect for dark sci-fi and post-apocalyptic scenes.
DE Eine praktische hohe Rändelmutter oder Rändelschraube nach DIN466, Größen siehe Bilder Das Modell lässt sich ohne Supportmaterial drucken. Die 0,2 mm dicke Schicht lässt sich einfach durchstoßen. A useful high knurled nut or knurled…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
This is an simple Holder for the AL-KO Mammut remote control. You can mount it with the 2 Screws or with an Double sided Tape. easy to print, no Support is needed.
Post-Apocalyptic Monster
Some stuff for the Teenage Mutant Ninja Turtles Sewer Diorama / Playset All wall decorations have a “click” system for the walls all multilcolor parts printed on the bambulab a1 mini with ams lite - sorry for that prusa! for a nicer…
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 5 colors Teenage Mutant Ninja Turtle for multi-colored FDM printing. Original Artist info: Teenage Mutant Ninja Turtle for 3d printing. Help me keep doing…
hey hoy- lets go … set 2 including: cctv + wall mount small Table wall mountable basketball pipe system + wall mount bar stool wall lights one cord + two cord enjoy it
![Beyblade X Bit: Ignition [Bahamut Blitz] [UPDATED]](https://media.printables.com/media/prints/0800167a-7a80-41bb-9634-60d491147cf9/images/12253754_0739b8d3-ab35-407f-93f7-8b6065b2db4b_02a4ab4b-0335-41cd-b624-67dfcff7dece/ignition.png)
