Search results: nano

Sort order

1,814 models

P
PrintablesFlyAttack

Nvidia Jetson Nano Case – NanoMesh Mini

NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…

Downloads
849
Likes
39
Rating
5
P
PrintablesOleksii

KORG nanoKONTROL2 knob

Replacement knob for KORG nanoKONTROL2 Print instructions I recommend to print it in PETG with elephant foot compensation on. Infill 100% prints in about 15 minutes. No supports are needed but you might have to clean up the ceiling inside…

Downloads
604
Likes
34
Rating
5
P
Printablestahunus

Enclosure for Arduino Nano 33 BLE Sense

Enclosure includes external access to reset / bootload button and to on-board LEDs.

Downloads
498
Likes
24
Rating
5
P
PrintablesButlers3D

Unifi nanoHD DeskStand

I required a movable access point and decided to create my own desk stand for an Ubiquiti Unifi nanoHD access point. Recomended Material : PLA Nozzle Diameter : 0.4mm Layer Height : 0.2mm Support : NO In-fill Percentage : 20% Required:…

Downloads
456
Likes
66
Rating
5
P
Printableszaphod

Outin Nano Adapter

another Outin Nano adapter for coffee cups

Downloads
268
Likes
28
Rating
5
P
PrintablesMarius Mihasan

DNA-sequencing nanopore

Molecular surface representation of a nanopore (PDB ID 6si7 ) together with the bacteriophage phi29 DNA polymerase (PDB ID 1xhz ) and a piece of DNA. The nanopore and polymerase are sliced in half and have locations for magnets, while the…

Downloads
152
Likes
18
Rating
5
P
PrintablesFabian

Ambilight for any pc monitor tutorial (prismatik, arduino nano, ws2812b)

The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…

Downloads
121
Likes
97
Rating
5
P
PrintablesKai

Ubiquiti u6+ / u6-lite / nanoHD octagon box compatible mount

Known good for: U6+, U6-lite, nanoHD → The U6-Pro has a different mounting bracket, this model does not work with the U6-Pro. → Unknown if this works with the U6-LR or not. This is a remix of a replacement of the original wall/flat…

Downloads
119
Likes
7
Rating
0
P
Printableshm

Arduino Nano33 TestAdapter

A 3D printed test adapter for connecting the SMD test-pins, especially for the SWD debug-interface, via pogo-pins. The OpenScad source file allows setting the diameters of the holes with the three parameters “shaftdiameter”,…

Downloads
82
Likes
5
Rating
0
P
PrintablesMoMoGoBot

ELECTRIC EEL WHEEL NANO BOBBIN TO 6.0 SPACER/ADAPTER

EEW Nano bobbins can be used on the EEW 6.0 flyer, but they leave a sizeable gap on the flyer rod. the bobbin can slide to the left at higher speed and drag the break band with it, which will eventually catch on the flyer arm and stop the…

Downloads
50
Likes
16
Rating
0
P

System 58: very small boxes "pico" and "nano"; FreeCAD included

These are two very small boxes out of the System 58 collection of sorting boxes. They can be used standalone for small items or they can be used with the smaller inserts to give them even smaller compartments. The sizes are: Nano: outside…

Downloads
20
Likes
2
Rating
0
P

Outin Nano Filter Baskets Carrier

OutIn Nano espresso machine filter baskets unlimited stackable carrier.

Downloads
16
Likes
2
Rating
0
P
PrintablesJiBB

Kryptonite Mini-U-Lock mount for Mercier Nano Mini-Velo

This is a mounting plate specifically for carrying a Kryptonite Keeper Mini-6 U-lock on a Mercier Nano Mini-Velo bicycle. This print works with (and requires) a 12" Voile nano-series strap to secure the lock. The plate installs using the…

Downloads
10
Likes
5
Rating
0
P
PrintablesSteeveeet

*NANO* All In One 3D printer test

Just when you thought that every possible way of calibrating your printer had been created, an entirely novel and unique method arrives! This isn't it, though. This claims to be neither novel nor unique, and is instead a cover version of…

Downloads
22,663
Likes
2,333
Rating
4.96
P
PrintablesPRIma

Nano Vise V2 by PRIma

Update 2023 : New designed parts available! Clamping range now 25mm and includes V-groove New grippy slider Check the file names starting with 2023 NANO VISE… The new basic version (no desk clamp) you can find here:…

Downloads
7,022
Likes
3,108
Rating
4.86
P
PrintablesHarrison

NVIDIA Jetson Orin Nano Developer's Kit Case

Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…

Downloads
6,964
Likes
174
Rating
4.95
P
PrintablesDIY Machines

GeoLeaf - 3D Print your own Nanoleaf project - Alexa, Hue and App integration

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…

Downloads
5,013
Likes
4,383
Rating
5
P
Printablesrmfms

nanodidg

This model is not my original creation , kudos to the original author Dan Sayers who gave me permission to upload this awesome parametric model created in OpenSCAD . nanodidg is a compact 3D printed musical instrument inspired by the…

Downloads
4,738
Likes
389
Rating
5
P
PrintablesJakob Kerber

Arduino Nano

I created this model as a reference model when designing enclosures for electronics containing the Arduino Nano. I made It precise enough to be used in renderings

Downloads
4,006
Likes
80
Rating
5
P
PrintablesDIY Machines

How to build a Giant Hidden Shelf Edge Clock - 3D Printable | Elegoo Arduino Nano | Smart Home | LED

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and…

Downloads
3,009
Likes
832
Rating
4.88
P
Printableswbronner

Louis Vuitton Nano bag for Flowers - bigger space - better to print

Drain Hole removed, negative volume body improved for easier printing. large overhangs reduced inside the bag. Printed with PETG prusament with 5 % giroid infill and 3 outer walls.

Downloads
2,974
Likes
281
Rating
5
P
Printablesvermotr

Nano SIM card adapter

Simple adapter to convert a nano SIM card into a standard SIM card. Changelog V1.0 (2023-04-03): First version

Downloads
2,827
Likes
91
Rating
5
P
Printablespawel50

Nano SIM to Micro SIM adapter

Tested on 3 different cards and 3 different phones. Note: The thinnest part has 0.8mm, consider this to adjust nozzle and line width.

Downloads
1,976
Likes
42
Rating
5
P
PrintablesPRIma

Nano Chuck by PRIma

3 Jaw Chuck modified for the Desk Clamp Version of my Nano Vise V2 https://www.printables.com/model/155120-nano-vise-v2-by-prima (get the desk clamp parts from this link above) easily swap between Vise or Chuck for your work! suitable to…

Downloads
1,914
Likes
626
Rating
4.77
P
PrintablesEl Manu

Arduino Nano slim case

I wanted a slim case for my Geekcreit® ATmega328P Nano V3 (a copy of the Arduino Nano board you can find on Banggood). I also wanted a case for situations without pins, but an output cable directly soldered on the board : I did this one.…

Downloads
1,891
Likes
199
Rating
5
P
Printablesistevene

Arduino nano mount

simple mount for a arduino nano. use 1 or 2 m3 screws to lock the arduino in place

Downloads
1,792
Likes
229
Rating
4.73
P
PrintablesKarel Bílek

Outin Nano stand

Folding stand for Outin Nano. Skládací stojan pro Outin Nano.

Downloads
1,696
Likes
102
Rating
5
P
PrintablesBarrtyG

Arduino NANO case

Distinctive features are: adherence to clearances for easy installation, compatibility with USB micro and type c, pin markings on the underside, retention of button function, and the ability to view pin signatures from the top, maximizing…

Downloads
1,681
Likes
238
Rating
5
P
PrintablesHP Robots Otto

Otto Ninja robot Arduino Nano design

⚠WARNING⚠ This previous design of Otto Ninja was publish because the community requested . This design is old compared to the new Otto Ninja Starter robot , some functionalities might not work properly or it will be difficult to assemble,…

Downloads
1,644
Likes
58
Rating
0
P
PrintablesGno

Arduino Nano - F3D, STL, OBJ, 3MF Formats

Arduino Nano - F3D, STL, OBJ Formats Description Introducing my meticulously crafted 3D model of the Arduino Nano, designed with precision and a splash of color. This model aims to assist those who are looking to create custom enclosures…

Downloads
1,622
Likes
25
Rating
0

Arduino Nano Case

Arduino Nano case is a protective enclosure that is designed to fit and protect an Arduino Nano board. Arduino Nano is a small, breadboard-friendly development board based on the ATmega328 microcontroller. The 3D printed case can protect…

Downloads
1,618
Likes
79
Rating
5
P
PrintablesPeter

Nano SIM Card Travel Case [Remix]

WHY? I travel a lot and often buy local SIM cards . Since I tend to lose them, I needed a simple and robust case to organise and carry them. It stores up to seven nano SIM cards and an opening needle . UPDATE v2 Based on your feedback, I…

Downloads
1,611
Likes
190
Rating
4.5
P
PrintablesHD_Creator

Arduino Nano holder

I really like the Arduino Nano, because it is small and cheap. Still it is typically well capable to play the role of a central or supporting microprocessor in homemade devices. The only problem is that is has no mounting holes. So how do…

Downloads
1,451
Likes
151
Rating
4.67
P
PrintablesPeter H

NANO SIM CARD CASE

I have two sets of sim cards - one for each side of the world, and this simple case keeps them relatively secure in my passport wallet. It's about half the size of a credit card, big enough to avoid being misplaced, small enough to take…

Downloads
1,364
Likes
160
Rating
4.85
P
Printablesscarrson

NanoVNA-H4 Rugged Box

A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…

Downloads
1,358
Likes
160
Rating
4.82
P
Printablesmsystems

Core & Tray for 1.2L ASRock a300 and x300 case (DeskNano x300 compatible)

The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…

Downloads
1,295
Likes
51
Rating
5
P
PrintablesBaran Tunc

Jetson Orin Nano Case

Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…

Downloads
1,207
Likes
36
Rating
4
P
PrintablesDavid Martinek

Ubiquiti Unifi AP stand (All in 1, NO SCREWS needed!) - Updated: LR / Pro / Nano / Lite

UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…

Downloads
1,206
Likes
92
Rating
5
P
PrintablesTeque5

Jetson Nano Case (Vented)

Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…

Downloads
1,012
Likes
34
Rating
5
P
PrintablesKejar31

Voron V0 tiny recirculating carbon filter, MFNano Remix

I was looking for a recirculating carbon filter for my Voron v0.2 printer but encountered some limitations with the Nevermore solution due to space constraints. Instead, I found the MFNano project by MappleLeafMakers, which seemed like a…

Downloads
1,002
Likes
337
Rating
4.81

Nano Vice

This vice is inspired by the Nano Vice from PRIma on Thingiverse. All the parts were redesigned from scratch, but the idea was strongly influenced by the original. It is slightly longer than the original, and I have increased the height…

Downloads
993
Likes
127
Rating
4.92
P
Printableshackerbijay

DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD)

DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY

Downloads
949
Likes
180
Rating
5
P
PrintablesDreaming Robots

EEW Nano 2 Parts

This lets you print parts for your EEW Nano 2. Here is a video with more info about how the parts are used. The only file that should needs supports is nano2_bobbin_disk.stl. For more info about my fiber tools visit:…

Downloads
931
Likes
94
Rating
5
P
Printablesysengard

Arduino Nano Case

Simple case for the arduino nano for your projects, protects the board and offers access to the usb and exit for the cables. For micro usb and USB-C models. Updated (10/07/2022) added case for USB-C arduinos Using 3x10mm screws. Print…

Downloads
902
Likes
107
Rating
4.83
P
Printablesmsystems

Lids for DeskNano x300

Lids for DeskNano x300. Supports pretty much any cooler. Cutout and Mesh styles. Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with…

Downloads
848
Likes
17
Rating
5
P
PrintablesKamil Ćwik

Sipeed NanoKVM Lite Case

The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing. The housing has a cutout that allows access to the microSD card without disassembly and holes for…

Downloads
827
Likes
57
Rating
4.86
P
PrintablesBenjamin Deiss

Nanoleaf Lines clone

A cheap and easy to build Nanoleaf Lines clone. The DIY Nanoleafs are powered by WLED providing a webinterface, smart home integration, countless effects and many others. Like the original one, individual patterns can be created. Multiple…

Downloads
810
Likes
222
Rating
4.88
P
PrintablesPRIma

2023 NANO VISE

Nano Vise 2023 Version Re-Design Been more than 5 years since I have uploaded my Nano Vise on Thingiverse ( https://www.thingiverse.com/thing:2066644 ) and it's about time to honor it with some small mods here on printables which are:…

Downloads
794
Likes
150
Rating
5
P
PrintablesIfrit

rfid box for rc522 and arduino nano

A box to contain an arduino nano connected with a rc522 rfid module. Not Fully satisfy by Dgoma box design ( http://www.thingiverse.com/thing:1413827 ) I decide to make my own. Like Dgoma I could only recommend the Miguelbalboa's work for…

Downloads
758
Likes
54
Rating
5
P
PrintableslayerCraft

Jetson nano case

I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…

Downloads
740
Likes
22
Rating
5
P
Printablesgiufini

PCB Workstation with Nano-Probes

The PCB Workstation with Nano Probes is the best solution to work with electronic boards equipped with SMD components that are very small and hard to access for many of the most used laboratory test probes. UPDATED: Now you can buy the…

Downloads
724
Likes
200
Rating
4.67
P
PrintablesYUN3D

Jetson Nano Case

Case for Jetson Nano

Downloads
680
Likes
31
Rating
4.5
P
PrintablesSpradlinb

Arduino Nano V3 case

A simple printed case for the Arduino Nano V3. The bottom half has two rows for the bottom pins. The top design allows access to the reset pin through the center hole and visibility for the four onboard LEDs. The two halves fit together…

Downloads
674
Likes
45
Rating
4.6
P
PrintablesAneoPsy

Arduino Nano Box

Arduino Nano Box Arduino board size: (44x19mm) BENEFITS: Fast to print Snap fit Small & Strong Designed for FDM Printing Smooth Operation

Downloads
674
Likes
70
Rating
5
P
PrintablesLee

Pro-micro nicenano nrf52840 dongle case

This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.

Downloads
673
Likes
35
Rating
5
P
PrintablesaTm_wRECr

Dovetail "nano" Gridfinity base

Standard Gridfinity with a dovetail connection detail. Minimalist with a twist. As with my other dovetail models, no tools or fasteners required. These have a small bump bar in them to “grip” the bin/tray inserted into them; friction fit,…

Downloads
662
Likes
102
Rating
4.69
P
PrintablesPatrick

Nano to micro sim card adapter

I use it to be able to insert the nano sim from my iPhone 5 into an iPhone 4. Instructions I printed the adapter on an Ultimaker. It fits nicely inside an iPhone 4 and works fine for me. If you run into problems you can modify the…

Downloads
647
Likes
14
Rating
5
P
PrintablesTimElectric

Loxone-Nano-2-Relay-with-Wago

Loxone Nano 2 Relay Tree mount for DIN Rails with Holders for Wago 221

Downloads
632
Likes
34
Rating
5
P
Printablesoohsam

Nanoleaf Hex Modular

I wasn't happy with the designs of the hex nano's around so i made my own with inspo from other ones around. This uses an ESP8266 with WLED installed and it works a treat. requires some soldering. You can have more LED's, or less,…

Downloads
628
Likes
230
Rating
4.82

#NLR35 digital Nanolongrange FPV drone

Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 4th and most sophisticated iteration. The design builds on my previous completely 3d printed frame NLR35. The goal was to make it lighter, more powerful and yet fully…

Downloads
599
Likes
365
Rating
5

NLR35 - single 21700 Nanolongrange digital FPV drone

Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…

Downloads
595
Likes
186
Rating
0
P
PrintablesElHeisa

Hexagonal Nanoleaf - Hexaleaf

*I designed my own version of the Hexagonal Nanoleafs. * * For people who look for an easier project without the soldering, please check out my No Soldering Version. * https://thingiverse.com/thing:5207176 Why is this version better than…

Downloads
589
Likes
249
Rating
5
P
PrintablesNikos

Arduino UNO / Nano / ESP32 Breadboard Base

This is a series of bases for Arduino UNO and similar expansion boards. I wanted a solid base to keep my boards along with a typical 830-pin breadboard for my projects. I was initially inspired by Dimiwit-Dave's designs but since those…

Downloads
589
Likes
105
Rating
5
P
PrintablesSam Hain

Trojan NXT Libra VII NANO

New Compact Design, Same Great Taste. Now with 50% Less sugar. (results my very) (also don't actually lick plastic parts… its just unsanitary) ;) ½ x28 Thread Fits .22cal airsoft or bb gun

Downloads
585
Likes
38
Rating
0
P
Printablesleonard

Arduino Nano case

A low profile case for an Arduino Nano 3.x with the common header configuration. I originally designed this as part of project which required the Nano to be mounted in a frame that was 1cm thick. The project has since gone a different…

Downloads
579
Likes
62
Rating
5
P
PrintablesEA3D

Arduino NANO + case

Feel free to download and make your own modifications. If you like my models, Follow me for more.

Downloads
574
Likes
39
Rating
5
P
PrintablesJAPOLabs

Arduino Nano Terminal Adapter

This design allows you to attach an Arduino Nano through the popular Deek-Robot Nano Terminal Adapter in a more robust fashion to your projects. It allows a pretty degree of stability in front of movements and vibrations with 4 attachment…

Downloads
562
Likes
65
Rating
4.5
P
Printablesmaramao

TBS Tracer Crossfire MPM Micro to Nano - JR bay module adapter

Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…

Downloads
555
Likes
13
Rating
5
P
PrintablesGhostdogs

Pi Torrent Nano

Update : Added STEP files Design I have tried to make this as simple as possible to print. The only part that needs supports is the main case. I use Tree - Organic supports as they are easy to remove and don't take long to print. All the…

Downloads
555
Likes
423
Rating
5
P
PrintablesShiqwitaDesign

Hexagon Nanoleaf

Nanoleaf hexagon for std RGB strips. Print panels Glue them together install controller/Converter install LED-Strips Glue top/lids Enjoy Misc: 3m of LED RGB kit 1 x Main 2 x Body1 1 x Body2 2 x Body3 Print Settings Rafts: No Supports:…

Downloads
554
Likes
125
Rating
5
P
PrintablesMadHulk

Arduino Nano Screw Terminal DIN Rail mount

This is a DIN rail adapter for an Arduino Nano Screw Terminal. Used Terminal Adapter: Terminal Adapter You also need some M3 spacers/nuts/screws: M3 Screws

Downloads
551
Likes
58
Rating
5
P
PrintablesJosh Myer

Yet Another Korg nanoKONTROL 2 Stand

This is a quick little stand to hold up a Korg nanoKONTROL 2 up off the desktop. I use mine as an extended control surface for desktop stuff (volume, screen brightness, etc), so I wanted to have this right behind my keyboard. In case…

Downloads
547
Likes
19
Rating
5

Smart Nanoleaf Replica

3D-Printable cheap Nanoleaf replica with Webinterface and Alexa support using a WS2812 RGB LED strip, it's easy to print and cheap to build, a must have. Print instructions 3D-Printed DIY Nanoleafs ( NEW UPDATE ) Update 24.02.2019…

Downloads
544
Likes
189
Rating
5
P
Printablesczargb

Fader cap for korg nanokontrol 1 or 2

I started from the nanokontrol2 fader Cap uploaded by xantharian and I made a couple of simple changes. Be reassured, these fader caps work interchangeably on either version of the korg nanokontrol (1 or 2) Print instructions Category:…

Downloads
543
Likes
13
Rating
0
P
PrintablesCrab

Otto Ninja for original NanoV3 plus Shield

Being a walking and wheeled robot, the Ninja looks really interesting to build. However, it is difficult to get the smaller Nano PCB, plus it is quite expensive compared to the Nano V3 plus Shield. (I have not yet experimented with the…

Downloads
518
Likes
22
Rating
5
P
PrintablesAtelier de JB

NanoLeaf Replica

Bonjour à tous voici ma conception pour vous permettre la création de panneau ressemblant a des Nanoleaf pour un coup beaucoup moins élevé. Vous trouverez le fichier F360 et en .step pour pouvoir enlever ci vous le souhaitez le marquage…

Downloads
516
Likes
125
Rating
5
P
Printablesbrianpark

Nano Bracket - Bike Tube Strap Bracket

Edit September 2023: I added the STEP file because someone requested it. This is an older model and I've learned a lot since, but it seems like it still works for people so I'll hold off on a redesign for now. — Made a simple bracket for…

Downloads
509
Likes
105
Rating
5

Arduino Nano case with GPIO access for breadboard

Do you ever need to place an arduino nano on a breadboard? place this case on it to protect it while you still have access to GPIO Designed on Fusion360 Print in PETG or PLA - easy slot together

Downloads
509
Likes
48
Rating
5
P
PrintablesW5AUG

NanoVNA Calibration Storage Box

Please like and follow and post your makes This is a small secure matchbox sized storage container for your Nano VNA calibration standards that generally come with a NanoVNA device in the SMA form factor. There are three positions and…

Downloads
495
Likes
84
Rating
5

Outin Nano Stand

Stand for Outin Nano for prepare coffe in your self coffe mug. Stojan pre prípravu kávy z vášho Outin Nano.

Downloads
487
Likes
24
Rating
4.8
P
PrintablesKaosuNeko

Arduino Nano DIN rail mount

Minimalistic Arduino Nano DIN rail mount You must use M1.6 fasteners. Yes, very small. You may need to grind off the head of the screw. You can use 2 mounting options: Use a self-tapping screw in the plastic part (use plastic spacer).…

Downloads
486
Likes
61
Rating
5
P
PrintablesDayOutBreeze

Nanoblock Base - Kawada Building Blocks Baseplate

Are you sick and tired of your Nanoblocks constantly falling over? Try a Nanoblock Base! Keeps all of my builds nice and vertical. Bases are also quite dense (50% infill) so they aren't easily knocked about/over. Variety of different…

Downloads
466
Likes
26
Rating
5
P
PrintablesThiago Silva

Nano Test Print - dimensions, overhangs, bridges, stringing and clearances

Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…

Downloads
464
Likes
37
Rating
5
P
PrintablesKaan Yaren

NanoVNA-H Box, Rugged

Edit-11-03-2024 – Added f3d and STEP files for altering if needed. I remixed the box to fit NanoVNA-H's measurements, and modeled some infill to support it. The fillings also have spaces for calibration bits and couple of converters. The…

Downloads
462
Likes
67
Rating
4

Nano shards - climbing holds

These are almost too bad really, with a height of 7mm, but they're fantastic for slab or vertical setting, and may be good for a screw on for a volume or arrete. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…

Downloads
452
Likes
57
Rating
5
P
Printablesmsystems

m.2. Tray Cover for DeskNano x300

m.2 Tray Cover for DeskNano x300. For extra thermal performance you can experiment with printing the Tray with the Mesh technique (Top & Bottom layer height = 0, 25 to 50% infill, and 2mm wall thickness). It will be less rigid, but turn…

Downloads
452
Likes
12
Rating
5
P
PrintablesAnnTOnnn

Ubiquiti Unifi UAP-AC-LR UAP-AC-LITE UAP-nanoHD twist off mounting plate with standoffs

I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…

Downloads
448
Likes
32
Rating
4.83
P
PrintablesGary

Ironman Nano Arcreactor

This is a simple 2 piece model to help you make/print your own Ironman Nano Arcreactor inspired by Ironman in the Avengers final. Youtube video Print instructions I've printed this on the MK3 without the upgrade at 0.1 layer height in…

Downloads
445
Likes
88
Rating
0

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Downloads
442
Likes
40
Rating
5
P
PrintablesFlat Badger

NVIDIA Jetson Orin Nano Developer's Kit Case no side holes

This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…

Downloads
438
Likes
11
Rating
5
P
PrintablesWaterDuffalo

Arduino Nano - Pickup Winder

UPDATE: Added a Winding Guide attachment because I noticed it's very easy to track the wire off the bobbin. Simply add it into the bolting pattern for the Bobbin holder on either side of the bobbin and you'll never have to worry about…

Downloads
426
Likes
65
Rating
2.5
P
Printablespixelk

Sipeed NanoKVM Lite enclosure

2parts, held together by four M3 10mm screws and nuts. no supports needed. OpenSCAD source available. New : Optional top that houses 4x4x4mm NdFeB magnets. Even half-populated it will stick to any metal case (just be aware of magnetic…

Downloads
423
Likes
33
Rating
5
P
PrintablesTimElectric

Loxone Nano 2 Relay Tree Rail Mount

Loxone Nano 2 Relay Tree mount for DIN Rails

Downloads
422
Likes
8
Rating
5
P
PrintablesTamagotono

Silpeed NanoKVM Lite enclosure

Simple enclosure for the Silpeed NanoKVM-Lite. I printed with no top or bottom layers and 30% hexagon infill for additional airflow. No supports needed. Made in FreeCAD 1.0rc2, source file encluded so feel free to mod it to your liking.

Downloads
416
Likes
33
Rating
5
P
PrintablesHannah

Nano to Mini SIM adapter

Remix of @vermotr ‘s remix of @ROSLAN ’s model. I found that the gap was not quite big enough for the SIM to fit without distorting the adapter so adjusted slightly. It may come down to your printer's settings as to which suits you the…

Downloads
414
Likes
6
Rating
5
P
PrintablesNikos

Arduino UNO / Nano / ESP32 Breadboard Box

I made a remixed version of this magnificent rugged box to store my Arduino UNO / Nano / ESP32 & Breadboard bases .

Downloads
403
Likes
81
Rating
5
P
Printablespictorf

Arduino NANO Every casing

Bottom part is a protection for the NANO Every, the cover is clipped on top of it. Break the 4 supports below the arms, then you can insert easily the NANO by opening the arm. The NANO stands firmly in place when plugging and unplugging…

Downloads
401
Likes
48
Rating
5
P
PrintablesMatigon

FPV cam adapter Nano to Micro (14mm to 19mm)

14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear. Included v2 : Is a little beefier…

Downloads
399
Likes
12
Rating
0
P
PrintablesDreaming Robots

EEW Nano 2.1 Parts

This is a list of the best 3D printable files I've made for the EEW Nano 2.1. You can get more information about this eSpinner at Dreaming Robots . Files starting with “eewNano21” will only work with the EEW Nano 2.1 Files starting with…

Downloads
397
Likes
46
Rating
5
P
PrintablesNotaBrick

Raspberry Pi Compute Module 4 with Waveshare nano b / a CM4 case

A small case to enclose a raspberry pi compute module with a waveshare nano b board with space to allow for a heat sink. EDIT: Requested, nano A has been added. I do not have the board myself, so feedback welcomed. The idea was to be…

Downloads
387
Likes
22
Rating
5