6,913 models
Connect 2 IKEA Lack Tables fix with Screws. I used SPAX T-Star Plus 5x25 No. 4191010500252. Need 16 of them.
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for PETGSource material: PET
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Basic track connector for hot wheels track
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Replacement adapter to 36mm cleantec hose. It does not swivel, preventing the hose to get stuck on the rails. The side panel of the tracksaw needs to disassembled to install the new adapter.
Print approx. €2.79–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
The original model from thingiverse.com called “Brio/ Thomas rail switch (Duplo design)” by FuriousSun is quite nice. However, I think having female connectors on one side, but male connectors at the other side fits better with the…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Printed with PLA at 100% infill to optimize strength. Each clamp uses a #8-32 x 1 inch machine screw and nut to attach to trekking pole. G-Code file prints both female and male clamps for Ender 3v2.
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for one variant
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
currently setup ignition power A = Constant Bat+ 12v B = Constant Bat- 0V C = Ignition switched 12V Printed in PETG for durability crimp blue sleeves fully otherwise you can't insert them
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Air assist connector. Designed for direct connection of quick coupling and flex hose 1/4" thread with minimal stress on the printed model. I recommend inserting O ring 11/2 Printed without support. PETG / layer 0.1 !!! / perimeters 5x…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
(English see below) Diesen einfache Eckverbinder kann man in Fusion 360 so anpassen, dass er zu unterschiedlichen Kabelkanälen passt. Dazu gibt man in Fusion 360 (Datei „ Kabelkanaleckparametrisch v2.f3d “) unter dem Menüpunkt "ändern"…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…
Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant
Update: May 28, 2022. Connector base updated to version Base_01Ni_v1.3. Channel deep for Ni-strip is increased from 7 to 7,5 mm, for better fit. Update: January 13, 2022. Both details slightli updated for better finger grip. Update: July…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
Update: January 13, 2022 added details for better finger grip. This is another version of DC output power connector 5.5x2.1mm holder. To get connected on a Parkside battery, you need any of these two: 70578-parkside-x20v or…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
USB A Male Connector Shield for this connector on PCB https://www.aliexpress.com/item/33047977518.html
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Leifheit make great cleaning products, but in an effort to make more money on selling handles, the connector head of their dusters (push-in with clip) is different to the connector of the mop (screw-in). This model will allow you to use…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
I've printed finke stand but it appears it was to small for my 15,6" laptop so I designed an extra leg so the laptop is not tilting backwards. The leg is pressed into the triangle hole of the leg. It is a nice tight connection but it is…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
I used the “ Magnetic Dust Collection Connectors ” from Robert Bieber and added the male part for a DN110 connection. For assembly information visit the original part and read the description.
Print approx. €8.18–€10.00 excl. taxPreliminary estimate for one variant
I didn't want to drill holes into my closet, thats why I designed simple connectors to put 3M double sided tape on the back. Other connectors are mostly designed for screws or are hollow, making it very hard to attach the HSW without…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
Motivation I want to use solar panels of an old solar system (Conergy C175M) in combination with a Microinverter for a balcony power plant. [A: Panel groups connected in parallel] As the panels have low power values (compared to current…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
A connector for making a truncated icosahedron out of straws. The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
90° connector for square steeltubes 20 x 20 x 1,5 mm. 2 versions (90° and 45° miter).
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Combined Extended and 15deg PTFE connectors
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make an icosahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
A connector to make a cube out of straws.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A connector to make a tetrahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Credit to the Original Creator This model is inspired by the classroom project “3D Printing Truss Bridges” created by the user “PolarCloud” and published on the website https://www.instructables.com/3D-Printing-Truss-Bridges . Bridge…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
This is a part allowing to connect two one-hand type Wolfcraft clamp together to extend their reachibility. It is composed of : One connector Two thumb screws “cap” You will need in addition : 2 M6x30 (or longer) hexagonal head screws 2…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for PETGSource material: PET
This model allows for screw mounting the 5-port connectors to a surface. I included the step files if you would like to modify for different sizes. There is a little lip on the back side to snap the connector in.
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
A connector to make a triangular prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A connector to make a dodecahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A connector to make an octahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This is followup on creating regular dodecahedron with 12 regular pentagon faces, with edges of toothpicks: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/toothpick-polyhedra-fullerenes/#post-606910 Dodecahedron…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
I wanted a fully 3d printable variation of the magnetic connectors for my dry box connections. unable to find something resembling the brass push connectors, I found firstgizmo 's model and remixed it with Line Arc Line 's tri magnet…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
A connector to make an hexagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Werkzeug zum Abziehen der Glühkerzenstecker ohne eine Spezialgange (VW 3314). Tool for removing glow plug connectors without a special tool (VW 3314).
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
When printing in a relatively humid location, it is preferable to print directly from filament dryers or dry boxes, keeping the filament enclosed in PTFE tubing all the way to the printer. This filament sensor top for the CoreOne INDX was…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
Printed on XL could be unstable on bedslingers. Printed with 0.4 Nozzle and PETG
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
Wing root endplate for the AtomRC Killer Whale which allows you to mount a JX9 connector. The connector can be removed provided you don't glue the foam cover on top. The original foam cover can be used but requires a small amount of…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I saw lots of interesting projects on the internet that connected three wooden rods in a teepee tent style. If you come up with any other interesting ideas, please post a make. Some ideas that I found: sideboard table plant stand jewelry…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for PETGSource material: PET
Compact Electrical Junction Box for WAGO 221 (or similar) Connectors This is a 3D printable model of a compact junction box designed for the neat and safe enclosure of wire connections using lever connectors, such as the popular WAGO 221…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make a pentagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Your toddler is climbing up and down the toddler stairs, while those are slipping and you're scared, the toddler might fall due to this slipping? I say, no more! This model connects the Trogen stairs from Ikea to the fronts of Ikea Malm…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
My wife recently started using foam (pool) noodles for quilt layering. But she found the noodles were usually too short to be up to the task. She asked me to whip something up to save a trip to the hardware store to get the PVC pipe…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
90 degree corner for 2020 aluminum extrusion. I used this for my diy printer.
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
I recommend using two colors of filament, black and white. You can use any filament: PLA, PTG, ABS or others. Use screws and double-sided adhesive tape for assembly.
Print approx. €5.01–€6.13 excl. taxPreliminary estimate for PETGSource material: PET
This is a Hose connector for the K40 Laser Cutter to replace the out of the box fan with an external fan or air filter system. It is attached to the standard bolt holes in the backside of the K40. See the pictures ;)
Print approx. €17.30–€21.15 excl. taxPreliminary estimate for PETGSource material: PET
Hope this model will be helpful. If you liked it please hit the [🧡 Like] button. While working on some projects I encountered with a scenario where I needed to make a simple circut for LEDs, which requires a resistor component along with…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
I used spiral tube that has 60cms of diameter. The two models are for different gutter dimentions, 100cms diameter and 80cms. Works nicely ;)
Print approx. €12.92–€15.79 excl. taxPreliminary estimate for PETGSource material: PET
Connect BOSCH PEX400AE to FESTOOL CT17 44mm vacuum hose. Self locking on sander.
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
Carefully epoxy the deans connectors into the block and plug. Use a longer cure epoxy as it can be difficult to get the connectors in. It is very important to do a dry fit and check how it fits together as the deans connectors are not…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
A connector to make an heptagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
I've created a magnetic connector and coupler to simplify speaker wiring. Printing: The plug is designed in two parts (split in PrusaSlicer) Easy2Print, 0,2mm PETG without supports Coupler Easy2Print 0,2mm PETG with supports from base…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Double-sided short curved switching track compatible with BRIO and IKEA and LIDL wooden rails.
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
This circular lid with a 3mm hole in the middle covers a connection box that is usually put in the wall. As a spare part that cannot be bought anymore it protects you from putting your fingers onto high voltage. The box should have a…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
2x HDMI, 2xLAN, 1x Not used
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Vytvořeno na opravu ulomeného zámku 4pin konektoru Fabia 1 (6Y5) palivového čerpadla. Mělo by být kompatibilní s dalšími starými modely koncernu VAG (VW/Audi/Seat/Škoda)
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make an octagonal prism out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make an nonagonal prism out of straws.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Made to fit the UrbanRed Ceiling Curtain Track Rail System https://amzn.to/43jKipe * * Amazon Affiliate Link
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
4-piece cat hammock designed to replace broken parts. PETG printed for durability
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
The Mean Well RD-85A is a fanless AC-DC dual output power supply - 5Vdc 10A and 12Vdc 5A. I'm using the Mean Well RD-85A power supply to power 130 LED lights (SK6812 RGBW - 5v at a max of 5A) and a Raspberry Pi 4 (5v at a max 3A) as part…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Raccord IKEA Jerker pour réhausse Ceci est le raccord pour fixer la réhausse du bureau IKEA Jerker (j'ai un V1, mais cela doit aussi fonctionner pour sur les montants d'un V2). Quand on dispose de l'option réhausse (qui se monte au-dessus…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for PETGSource material: PET
Beginner in 3-D printing, so just wanted to try Fusion 360. Made the connectors a bit loose, so the tracks will have some space for movement.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Shoei Gen3 GoPro vertical Clip-Mount for right side Helmet Accessories Connector. Print-in-place. Generation 3 Helmets are: Neotec3, GT-Air3, J-Cruise3…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Use to connect wooden sticks, bbq skewers, toothpicks, thin dowels etc. together to build model buildings, furniture, etc. Teaching engineering and design to elementary school students. Used tinkercad for design. See photo of applicator…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Connectors for 120x25mm Fans. I choose magnetic design because I wanted it to work in any direction and arrangement. You can attach each fan in any direction or on any side. Magnets have to be inserted while printing! Make sure to attach…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk. Needs to be adjusted to specific size. Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 4,5 hours. (with MK4 input shaper feature…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
Yes, mini drone motors and DRV8833 motor driver could be superglued together without any help. But that would be always slightly different robot bases. The 3Dprinted part gives motors and motor driver a defined position to superglue to.…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This is to connect 4 inch dust hose to shop-vac hose 40 mm refurbishes This connect to Bosh sander 6 inch. See picture for the way i print it. made in PETG
Print approx. €8.26–€10.09 excl. taxPreliminary estimate for PETGSource material: PET
This a remix. I had no options to take meassurements. So I took an already existing model and added a chamfer.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
After the failure of the original connector, I designed a very similar one, but smooth inside, which prevents sawdust from getting stuck inside. Print as in stl. There is no need to use brims or supports.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Often the existing connectors on the Roth Drawer Organizers are sufficient. But the drawer organizers have connectors only on one side. There are configurations, where connectors are not available, or it is on the wrong side. With these…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to use my Raspberry PI version 3B with a camera to monitor printing progress. I found a project here https://www.thingiverse.com/thing:3079477 that met my needs. However, it was designed for a different printer and mounting to…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Quick and easy print to connect Rainbow loom bracelets
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This is a PoleMaster connector for AstroTrac 360 mount. It requires following 2 items for assembly: My “Dovetail saddle for AstroTrac 360” ( https://www.printables.com/model/528477-dovetail-saddle-for-astrotrac-360 ) & “Ultra mini compact…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
