Search results: oro

Sort order

11,618 models

P
PrintablesSheepMe!

Voronoi Drinking Glas Coaster

Model Drinking glas coasters with holder in Voronoi Pattern. The holder can hold up to 15 coasters. Dimensions The coaster has a diameter of 99 mm and a height of 5 mm. The storage container has a diameter of 110 mm and a height of 80 mm.…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,233
Likes
885
Rating
4.89
P
PrintablesKingTut

Voronoi skull skull

A voronoi skull designed to print perfectly and not require too much support. It is prints on its nose and only requires a bit of support on its eyebrows and forehead, this can be painted on in most software but if you can't or don't know…

Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant

Downloads
2,085
Likes
278
Rating
5
P
PrintablesPreischl 3D

Voroni Cat

Voroni Cat Hey maker! 👋 I created a simple cat model and applied a Voronoi pattern – lots of fun! Features: Stylish Voronoi design for a unique look. Perfect for display, desk decor, or as a small gift. Printing Tips: PLA or PETG…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
1,739
Likes
276
Rating
4.85
P
PrintablesLinkDesigns

iPhone 8/SE Case - Support free voronoi designs (hard and soft versions)

Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…

Print approx. €1.67–€2.05 excl. taxPreliminary estimate for one variant

Downloads
1,299
Likes
84
Rating
4.69
P
PrintablesCoolioiglesias

Savegrabber - open door without touching the handle, press knobs without touching - additional barrier for the coronavirus and other germs

Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,276
Likes
63
Rating
4.91
P
PrintablesPreischl 3D

Voroni Rabbit

Voroni Rabbit Hey maker! 👋 I took a rabbit model and applied a Voronoi pattern – lots of fun! Features: Unique Voronoi design for a stylish look. Perfect as a desk decoration, gift, or display piece. Printing Tips: PLA or PETG recommended…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
1,235
Likes
120
Rating
4.91
P
Printables3DP-MAMSIH

Voron Zero (V0VO) toolhead

Update 04/10/2021 pre-support files added mount for NF-Crazy Volcano (Let's push it further ) Voron Zero (V0VO) toolhead Dragon / Mosquito Based on HeVort extruder( By MirageC with Big thanks to Him on this awsome design ) How to print…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
770
Likes
242
Rating
4
P
PrintablesGabor Gyarmati

Dual Color Bookmark with Voronoi Roses

A bookmark with roses, print it with filament swapping to get a dual-color print! For extra smooth surfaces, tick in ironing in your slicer!

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
667
Likes
175
Rating
4.5
P
Printablesetv99

Wooly Sheep Voronoi Style

This is a remix from this wooly sheep from thingi: https://www.thingiverse.com/thing:95721 You have to support the ears since they are hanging on the tip. Due to the very small amount of filament on the first layer, print this layer VERY…

Print approx. €11.09–€13.55 excl. taxPreliminary estimate for one variant

Downloads
597
Likes
93
Rating
5
P
PrintablesMiguel M.

Humorous Bathroom sign

These are humorous bathroom signs that I made. There a a couple different shapes to choose from The default STL's are as big as I could fit on the Mk3 but you can resize these very easily to any size you need. Printing These print great…

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant

Downloads
571
Likes
139
Rating
5
P
PrintablesFlora

Voronoi snowman

As you can see, it's a snowman with a carrot and a hat. The model is printed in parts. The removable hat allows for use as a container for things like candy, but unfortunately, the relatively small opening can be a problem – when printed…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
542
Likes
164
Rating
5
P
Printablesmkoistinen

Totoro Lamp - Siri/HomeKit enabled!

This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
469
Likes
107
Rating
3.5
P
PrintablesGaladriel

Voronoi Torture Test

Push your printer to the next level with the Voronoi Torture test! This all-in-one print tests cooling, print speed, extrusion, bridging, and retraction in one print. Print away! Recommended Settings: 0.1-0.2 mm layer height PLA (Or other…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
449
Likes
33
Rating
4.8
P
PrintablesNikosSprocket

ERCF Frame Legs for Voron 2.4 300mm (version 2)

My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…

Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant

Downloads
436
Likes
77
Rating
5
P
PrintablesJ&S Design

Voronoi Maple Leaf

Maple leaf with voronoi design. Can be used as a keychain, coaster under your cup, earrings or just as a home decoration. The leaf has a unique voronoi design similar to the drawing on living leaves. Suitable as an autumn or winter…

Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant

Downloads
427
Likes
97
Rating
5

Voronoi Style Gecko

Designed to be free standing or wall mounted and infinitely scaleable. Depending on your printer and the chosen scale, upto 1mm can be plane cut from the bottom to get a good first layer. Prints without supports

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
424
Likes
89
Rating
4.67
P
PrintablesMoyYep

Super powerful Toroidal Propeller Pull Launcher

Printing: No supports needed except maybe for the pin gear and propeller. I personally didn't use supports and it came out fine. Print the gears and the rack at 100% infill for maximum strength. Enable ironing for that smooth finish. See…

Print approx. €6.18–€7.56 excl. taxPreliminary estimate for one variant

Downloads
291
Likes
47
Rating
0
P
PrintablesYosuke

Nendoroid circle base plate

Simple circle shaped base plate for Nendoroid figures. The diameter is 84mm and the height is 8mm (same as the original). The fitment might be tight, depends on your printing condition. so please check and adjust if necessary.

Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
265
Likes
35
Rating
5
P
PrintablesWill

Voronoi Style Gecko

This is a very slightly modified model of Far North 3D Printing Services's Voronoi Style Gecko. Just scaled up to 150% and flattened off the bottom for more surface area on the print bed.

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
26
Rating
5
P
PrintablesTWB

[REMIX] The Thinker - Voronoi Edition

The original model height is approximately 21cm. Suggested print settings: Layer height 0.2mm. Infill 20%. Perimeters: 3. No supports are needed. Models in pictures are printed at 50% scale. Changelog 20 Oct 2023: Version 2 - An alternate…

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
44
Rating
5
P
PrintablesGabor Gyarmati

Baby Dragon with Voronoi Scales

Vori is a baby dragon with Voronoi-patterned scales on his wings and belly. If you want to give him an extra organic feel, print the optional Voronoi web and glue it to his belly! Vori was specially designed for the Voronoi weekly…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
236
Likes
125
Rating
5
P
Printablescrashkg

Industrial Phone Stand - Larger w/ Voronoi Pattern

I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant

Downloads
230
Likes
51
Rating
5
P
PrintablesNikosSprocket

Voron 2.4r2 300 Noctua Fan Side Skirts with Honeycomb Mesh.

These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
38
Rating
5
P
PrintablesPadu

Sphere Lamp - Voronoi

Additional materials needed : 6x magnet D4mm x 1.5mm LEDs Lunartec (D90mm x 22mm) PLA magicPLA Metallic Emerald Printing without supports Nozzle 0.4mm Layer 0.3mm

Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant

Downloads
220
Likes
44
Rating
5
P
PrintablesNikosSprocket

Voron 2.4r2 300 Side Skirts with Honeycomb Mesh

These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…

Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant

Downloads
215
Likes
31
Rating
0

Humorous Office/ Workshop Sign (Revisited)

Plain & simple; a raised multicolor sign for your office or workshop that is meant to parody a ‘Sensory Deprivation Chamber’ sign. Enjoy, and let it be a reminder that its good to take breaks every once in a while. Recently revisited with…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
93
Rating
5
P
Printablesjirom

Nendoroid/Figma Adapter Mount for IKEA Skadis

Two models are available: Square Adapter Mount (Recommended) - Easier to print and does not require any supports. Circular Adapter Mount - Looks better but requires requires additional supports. Printing Instructions Note that depending…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
203
Likes
56
Rating
0
P
PrintablesJ

Voron 2.4 Multi-Tool HEPA/Carbon Filtered Exhaust [Beta]

Exhaust housing, with carbon/HEPA filtering, to jam your multitool birds' nest into so we can pretend we have good wire management! Supports 2 to 6 tools. BOM (not including what you should have from the stock 2.4: 2-6x Molex Micro-Fit…

Print approx. €17.59–€21.50 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
41
Rating
5

Motorola Talkabout T42 clip

Suports needed! Printed on a Prusa Core One My setings were: i used organic supports contact distance :0.1mm interface patern spacing :0.1mm top interface layers :3 I printed in pla ,but abs, pet, petg or asa are ideal but i did not…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
12
Rating
5
P
PrintablesHopfenschorsch

Voron V0.1 Dragon hotend Mini Afterburner Better hotend cooling

To install the upgrade you have to remove the hotend. The next step is to insert the printed part with the open side facing the hotend cooling fan. It should clip in with the two noses into the fan mounting holes. Next you have to insert…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
17
Rating
5
P
PrintablesGabor Gyarmati

Voronoi Anatomic Heart LED Night Light

An LED light made from a cool anatomic heart with a voronoi porous texture. Good gift for anatomy lovers or your loved ones! It is a remix of a voronoi heart model found on Thingiverse. I've made a small base for it and turned it into a…

Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
59
Rating
5
P
PrintablesDragontype191

1989-1992 (at least) Toyota Corolla and/or Geo Prizm Shift indicator and dust protector

So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
7
Rating
0
P
PrintablesST3V3DDRUCK

Bathtub Corner Shelf Voronoi

Needs to be mounted with double-sided tape (or something like UHU Patafix) because i didnt want to drill holes into my bath tiles The rescale version is to fit on a Prusa MK4

Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
24
Rating
0
P
PrintablesAsus1357

Toro snowblower key

Back up or replace ignition keys for snowblowers by MTD, Ariens, Certified, Husqvarna, Powersmart, Toro and Yardworks and possible others in North America. This is a remix of the key by Foden. Unfortunately it does not work on my Toro and…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
9
Rating
0
P
Printablestomecar

2020 Toyota Corolla 1L Water Bottle Holder

2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle. Print instructions Category: Food & Drink Summary 2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle.

Print approx. €5.72–€6.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
143
Likes
30
Rating
5
P
PrintablesPavel Berka

Grocery Bag Hook for Toyota Corolla TS XII E210 (v 02)

Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
21
Rating
2
P
PrintablesMiłosz

Volume knob for motorola talkabout t82

This part is almost identical to the original. It fits perfectly, but it’s a tight fit, which guarantees it won’t come loose. The knob was printed in PET-G, though I also tested PLA (it works the same). It was printed in the normal…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
4
Rating
0
P
PrintablesUloPe

Waveshare 7.9" touch display mount for Voron 0.2

This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…

Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
20
Rating
0
P
PrintablesMarcusInCo

1/2" EMT Mount for Coro Props

This is the generic mount I use for all of my ws2811 RGB Christmas props. There is a ¼-20 hole on the side for adding a set screw. Prints a bit tight, but intentionally so to help keep the screw set in.

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
119
Likes
19
Rating
4.5
P
PrintablesCabista

Nefertiti clad in Voronoi with (secret) box

Nefertiti clad in Voronoi with (secret) box. Enable "support enforcers" for the paint on support.

Print approx. €5.02–€6.14 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
33
Rating
0
P
PrintablesJC

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount (Dodge Durango Pursuit)

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…

Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
12
Rating
5
P
Printablesvindolin

Porous silica gel container with screw on lid

Modeled in Fusion 360 and then made permeable to air by modifying the models with cylinder volumes that delete the perimeter/bottom/top layers for the parts that should be porous. The 60% gyroid infill gives a very small pore size that…

Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
9
Rating
5
P
Printablesjrdn8056

Voron0 drill jig for aluminum extrusions

This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
16
Rating
0
P
PrintablesBooks

Dragon Ouroboros Coin

Coin with engraved dragon symbol. Uses art from PublicDomainVectors.org .

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
17
Rating
0
P
Printableseyalshtark

VoroKnot

VoroKnot The G-code has very small supports on the bottom of the model in order to make it stick to the hotbed. this was done with a support modifier cube placed on top of the model, leaving a very small section on the bottom for the…

Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
21
Rating
5
P
PrintablesNahoj86

Roborock S6/S5 Max Base

Base for the roborock s6/s5 max, protects the floor from the moist cloth. Use PETG or PLA STANDARD 0.2mm STRUCTURAL This base is 5.2mm high = easy docking

Print approx. €2.63–€3.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
11
Rating
5
P
PrintablesDsK_Printing

Maintenance - Base (Roborock S8)

For the regular maintenance of my Roborock S8 i needed a simple solution to protect the laser tower while the robot is laying upside down. Technical Data: inner diameter: 90mm angle: 8° height at the lowest point: 22,5mm Print settings:…

Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
10
Rating
5
P
PrintablesDanAndersen

Waveshare CM4-NANO-B baseboard frame for Voron DIN-Rails

Raspberry Pi 4 are hard to source. Using Raspberry CM4 modules together with a cheap baseboard can be a performant and compatible alternative. The CM4-Nano baseboards are sub 20 euro, so they fit well. This is a relatively simple mount…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
5
Rating
0
P
PrintablesMaVeRa

Carnivorous Plant

A great decoration for the home and garden or as a gift for a friend. Print in the size you need. If desired, paint with acrylic paints with an airbrush for the best result. Everything is included. 3d model, STL, as well as preserved…

Print approx. €4.83–€5.90 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
18
Rating
0
P
PrintablesBrad King

Motorola Single APX Desk Stand

This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
6
Rating
0
P
PrintablesAsus1357

Toronto Blue Jays coaster

A MMU coaster. Printed face down, Cork adhesive bottom added. Open as project.

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
2
Rating
0
P
PrintablesBrian

Reverse Lockout Spring Retainer for the GR Corolla

Note: I do not own a GRC, made this for a friend that owns a GRC. They confirmed the fit to work in their shifter set up.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
3
Rating
0
P
PrintablesBrad King

Motorola Dual APX Desk Stand

This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.

Print approx. €5.67–€6.93 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
7
Rating
0
P
PrintablesClamikra

Magnetically attached neck and base for Full Sized Voronoi Head

I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…

Print approx. €4.53–€5.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
6
Rating
0
P
PrintablesImKhor

Air plant voronoi basket (wall mounted)

Voronoi basket to mount in a wall ring! I made it for air plants but I'm sure there's more uses to it. The default diameter is 32mm but it can be scaled of course. My cover pic prints look messy because I printed them in wood, but when…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
12
Rating
0
P
PrintablesCabista

Algix Chameleon Voronoi

Algix Mascot turned to voronoi with added eyes for the better look.

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
8
Rating
0
P
PrintablesSchaffer.la

Poloroid picture frame

Nice little frame. printed here in PLA silk (gold and silver) stand in black. The “front” has plenty of room to emboss or de-boss titling in the Prusa Slicer. Assembly is as shown in the exploded view

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
7
Rating
0
P
PrintablesBlank

Toronto Maple Leafs Light box (no ams)

1. Glue the front panel to the border 2. Align and glue the maple leaf and the letters to the front panel 3. Insert and stick the LED light strip of your choice on the inside of the border(i used this one) 🠋🠋…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
4
Rating
0
P
PrintablesPeter Farell

First King Hotu Matua's Toromiro Back Scratcher

Hotu Matua is a central figure in the oral traditions of Easter Island (Rapa Nui). He is often described as the island's original settler and the first king of the Rapa Nui people. According to the legends, Hotu Matua arrived on Easter…

Print approx. €5.99–€7.32 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
20
Rating
5
P
PrintablesBrad King

Motorola Quad APX Desk Stand

This stand can hold APX 6000's, APX 7000's, and APX 8000's. No supports or raft needed. Infill is 15%.

Print approx. €8.03–€9.82 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
4
Rating
0
P
PrintablesBlank

Toronto Maple Leafs Nylander coaster

Willliam Nylander #88 Coaster

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
0
P
Printablesdrofmij

Corolla pop socket phone mount for empty accessory button.

**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
10
Rating
0
P
PrintablesDieguito

Sevilla 3dMap Triana/TorredelOro/Maestranza/Catedral

3D map of the city of Seville with the guadalquivir river as it passes through the city and with monuments such as the Maestranza, the Triana neighborhood, the Torre del Oro or the Cathedral of Seville. File in general STL and in Gcode…

Print approx. €7.44–€9.10 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
6
Rating
0
P
PrintablesMichael Browne

Voron 2.4 Z Chain Transpose - LDO Rev.D igus gantry

Use this if you want to do a z-transpose of a Z-chain you got from an LDO Rev D Voron 2.4 kit, and want the chain to sit flush and level, without any bending of the chain.

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
4
Rating
5
P
Printablesseekerbot

Phone holder for Kosmos microscope (modifiable; Motorola G6Plus)

I am providing the model for the Motorola G6 Plus and Kosmos 722510 children (Entdecker / Explorer), but the FreeCad File is parameterised and you can easily adapt to your own phone. The biggest advantage is that more than one person can…

Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
5
Rating
0
P
PrintablesBlank

Toronto Maple Leafs Matthew Knies Coaster

You can also flip it around if you don't want the build plate textured finish on the top surface. :)

Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
4
Rating
0
P
PrintablesMS_D3sign

Voronoi Volcano Vase

This volcano-shaped vase features the popular Voronoi pattern, giving it a geometric and modern look. It’s perfect for home decoration or as an artistic piece. The design requires supports to preserve the details during printing. PLA or…

Print approx. €16.32–€19.95 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
4
Rating
0
P
PrintablesPeter Farell

Rongorongo : Harekāingakai : My place of peaceful rest and nourishment : : Home Sweet Home

Rongorongo : Harekāingakai : My place of peaceful rest and nourishment : : Home Sweet Home Easter Island Version of Home Sweet Home Sign. The gcode includes fillament swaps at z height... So if you dont want that please reslice.

Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
3
Rating
0
P
PrintablesMartin1671

Jogurt planter voron decor

Cover for yogurt planter. There is a place for retention tray under the planter.

Print approx. €11.97–€14.63 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
3
Rating
0
P
PrintablesUjdoMajdo

Motorola MOTOTRBO - DP4400e

The first part of my project to create a functional two-way radio. I hope someone likes the model. I tried to stay as close to the original as possible. První část mého projektu na vytvoření funkční vysílačky. Snad se bude někomu model…

Print approx. €6.50–€7.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
2
Rating
0
P
PrintablesNeohhhh

Revo Nozzle Holder 1515 Profile Voron0

Quite a simple nozzle holder for Revo nozzles. I used some drop in nuts and M3 screws to fit it in place. Depending on how good you printer is dialed in you should be able to push the nozzles in place. Maybe you need to “screw” it in. But…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
3
Rating
4
P
PrintablesJosef Drapák

Koncovka lanka pro motorovou sekačku / Cord end for lawn mower

Výplň 100%, na výšku, podpěry všude. Materiál PETG. Pasuje na trubku průměru 22,2 mm, upevňovací otvor průměr 6 mm.

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
4
Rating
5
P
Printablesthiebes

Mount for Hamamatsu Avalanche Photodiode (APD) C10508-01 with Voronoi vents

This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesFabrigator

Toyota Corolla Passenger Air Bender

Ever been driving in the heat and wanting the cool air coming out for the non existent passenger to actually reach you. Well this adapter should help direct cool air towards your midriff. Print with PETG or PLA depending on your needs…

Print approx. €3.55–€4.33 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
10
Rating
0
P
PrintablesJC

Motorola Battery APX-7000 and APX-8000 Laser Marking JIG

Motorola Battery APX-7000 and APX-8000 Laser Marking JIG This Jig is used to laser mark batteries for identification and ownership. Caution should be used when Laser marking any surface, especially battery cases. I am using a SainSmart…

Print approx. €4.22–€5.16 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
2
Rating
0
P
PrintablesDefozo

Roborock Blockage for Songmics Standing Desk

This model is a specially designed blockage for the Songmics Standing Desk, created to prevent Roborock vacuum cleaners from becoming stuck underneath it. The design ensures easy installation and removal, making it a convenient addition…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesPavel Souček

GHS05 Korozivní látky a žíravé látky MMU3

Určeno pro MMU3 a zrnitou podložku, rozměr 200x200x3mm. Prusa MK4, MK4S s MMU. Ideálně PETG. Barva základní bílá, červená, černá.

Print approx. €3.95–€4.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
2
Rating
0
P
PrintablesMakerMan

Forest Dwelling Korok (BotW & TotK)

This model is of a Korok from the Legend of Zelda, and I have it sectioned into 4 files. The base I covered in modelite clay, enabling increased surface are to adhere the Korok feet for stability. Each part was individually painted, and…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
3
Rating
0
P
PrintablesTRILL CLINTON

Key fob battery clip for Toyota Camry, Corolla, and Tacoma (HYQ12BDM)

Did you break the battery clips on your Toyota HYQ12BDM key fob, making the battery pop out and rendering the key fob buttons useless? Don't spend hundreds at the dealership getting a new key, print this part in five minutes! This little…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
PrintablesPeter

Cat Stretch Voronoi Remix

This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…

Downloads
53,719
Likes
12,386
Rating
4.87
P
Printablesthrutheframe

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…

Downloads
43,320
Likes
4,636
Rating
4.91
P
PrintablesMeister Edel

Toroidal Rotor 4 Strong Flying Propeller

This is a remix of my Flying Copter Toy :) My first ones still last strong but everyone is talking about toroidal rotors. I really like this design and I think it is a meaningful appreciation of the main design. But try it out yourself! I…

Downloads
32,625
Likes
7,424
Rating
4.96
P
Printablesjamesgt

Voronoi deer ornament

See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…

Downloads
23,029
Likes
5,051
Rating
4.88
P
PrintablesRichard M

Voron 2.4 Filament Latch (or any 2020 extrusion)

Printable quick release latch for panels on 2020 extrusion This is originally inspired by a youtube video - https://www.youtube.com/watch?v=6p7M18oPn3k A recent review video on YouTube by Maple Leaf Makers Another user did a review of the…

Downloads
22,408
Likes
1,470
Rating
4.93
P
PrintablesVoron Design

Voron Design Calibration Cube

The Voron Design Calibration Cube: a precision tool tailored for optimizing your printer settings to achieve the best results when printing Voron Design components. Designed following a comprehensive set of design principles, this cube…

Downloads
20,624
Likes
1,217
Rating
4.97
P
PrintablesFunFunBoy

Nozzle Scrubber with a Little Bucket for Voron 2.4

This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…

Downloads
19,324
Likes
985
Rating
5
P
PrintablesAKinferno

THE FILTER, for Voron 2.4

My friend nateb16 designed this. The Git is VoronUsers/printer_mods/nateb16/THE_FILTER at master · nateb16/VoronUsers (github.com) NOTE: Latest revision/files will always be posted to GitHub first, and updated here as time permits. ***…

Downloads
18,821
Likes
762
Rating
4.93
P
PrintablesDET-Man

Modular Mesh Inserts for the Voron Fan Grille

When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…

Downloads
17,607
Likes
780
Rating
4.83
P
PrintablesArea 3d Studio

Voronoi vase

UPDATE 4: Add pre-suported version of upper part use brim for adhesion. UPDATE 3: Updated to version 2 easier to print the bottom part. Repaired 1 piece version, thanks for explaining the problem to sersch123 UPDATE 2: Dual extrusion MMU…

Downloads
16,734
Likes
5,474
Rating
4.89
P
Printablessorted

Filametrix - MMU/ERCF Filament Cutter Voron

Filametrix Mod This is a mod of the Voron Stealthburner which adds a filament cutting possibility! Main Body Main Body with Filamentsensor Option has been added. - SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS -…

Downloads
15,908
Likes
592
Rating
5
P
PrintablesDET-Man

Plug-In Mesh Inserts for Voron 2.4 Skirts

I wanted the nice mesh-style look for the skirts of my Voron 🥰 but without reprinting the complete skirts and especially without “meshing” with the slicer 😉. So I designed these plug-in mesh inserts which besides the awesome look also…

Downloads
14,106
Likes
339
Rating
5
P
Printables3DPrintDemon

Voron 2.4 / Trident Canopy Top Hat - REMIX Split model, half printing time & 5g supports

…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…

Downloads
14,061
Likes
553
Rating
4.97
P
PrintablesGalvanic

Voron Bowden ptfe tube guide arm and canbus cable support

V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…

Downloads
13,610
Likes
686
Rating
4.91
P
PrintablesDET-Man

BTT HDMI 5 Display Voron Mount (Works with Clicky Clacky Door)

This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…

Downloads
13,560
Likes
276
Rating
4.78
P
PrintablesŠtístko

Voronoi Deer

This 3D model is a stylized representation of a deer with a distinctive Voronoi texture.

Downloads
13,546
Likes
2,285
Rating
4.95
P
PrintablesEDnation

BTT HDMI5 V1.2 display mount Voron

**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…

Downloads
12,318
Likes
231
Rating
4.97
P
Printablesrandom.ae

Sturdy Print-in-place Panel Latch for 2020 Extrusion - Voron Panel Clips

I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…

Downloads
12,309
Likes
264
Rating
5
P
Printablesvidision

Thick Voronoi Squeeze Ball (TPU test print)

Made with meshlab and made to be printed without supports or any special settings, as a stress test for TPU printing.

Downloads
12,012
Likes
589
Rating
4.87
P
PrintablesDeclanD_

Voron Design Cube V7 (2.4R2)

To check for dimensions and tune accordingly, this cube should be printed as is in 30x30x30 mm. This guide can help you tune your printer in according to this model - AndrewEllis Print-Tuning-Guide If you want to tune your printer for…

Downloads
11,605
Likes
147
Rating
4.89
P
PrintablesŠtístko

Voronoi Elephant

The Voronoi Elephant is a charming 3D model that combines the majestic form of an elephant with the mathematical beauty of a voronoi pattern. This pattern resembles a natural network of cells or cracks in dried mud, giving the elephant an…

Downloads
11,481
Likes
1,995
Rating
4.89