2,627 models
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
This new baseplate allow mounting of several trim routers Tested with 65mm Makita Compatible with : Makita 3709 - 3710 - RT0700 - RT0701 Katsu Erbauer EPR710 Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4") Ryobi (55x55mm)…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for PETGSource material: PET
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Router template to create a perfect radius on your corners
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router. You will need to print 4x support screw 4x support screw…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
Print approx. €7.07–€8.64 excl. taxPreliminary estimate for one variant
This is a straight edged version of the Butterfly router template. I included the F3D file so you can scale it to whatever size you need. The inner butterflies of the template are included and are sized .1mm smaller for tolerance. Makes…
Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant
Makita router jig fit on a makita 18V DRT50Z
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a router track sled so you can guide a router in a straight line following a track saw track. This has been designed to work with the Dewalt track and a Erbauer router. I have printed all components with PETG the components are…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
Bracket for mounting a Starlink Gen 3 router
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for PETGSource material: PET
Wanted a simple featherboard for my workbench router and decided that it was better for me to print rather than buy. Fusion 360 files included (but it can get messy when resizing.) I probably could have made the model 1mm thinner and…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Outer Wilds Patch Patch-logo from the video game Outer Wilds Printed at .1mm layer height, ironing, with color change at each top layer You may have better results with a smaller nozzle .3mf/.stl included Prusa MK3S .gcode included
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
This is a remix of the radius finders created by victornpb with inset numbers instead of raised.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Introduction This is a set of jigs that you can use to route the stepped mortices to install your SOSS invisible hinges. There are model files for every standard type of the SOSS hinge. They come in two flavours, depending on the…
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
Router dust port designed to fit my Ryobi R163G Router with Fixed Base. Attached via two small machine screws in existing threaded holes. Dust port is sized to fit a normal 2" inner diameter ShopVac hose. Print instructions I designed in…
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for one variant
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
13 different sized radius templates. This is used for creating radiuses from 0-3 inches using a trim router on wood, aluminum or plastics. The template gets traced with a trim router and tracing bit as shown in the pictures. I attached 2…
Print approx. €6.85–€8.37 excl. taxPreliminary estimate for PETGSource material: PET
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
This is a router base that matches Milwaukee base 2723
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for PETGSource material: PET
A standard centering cone but with one feature I didn't see in others: recesses cut for keeping seams away from faces that need to be smooth. Seams would otherwise interfere with the centering or the tolerance on the pin hole. I modeled…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
This is used with a 1" wide metal ruler to measure the distance from your router bit to your fence. It has a ¼" and ½" indents for both size router bits shanks. Uses a M4 nut and screw to lock the metal ruler into place. Enjoy!
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
I remixed these from topxnbo on thingiverse to be the same thickness for the bar as the depth guides. I also added an easy angle gauge to each bar. 1/8" - 90° angle gauge 3/16" - 85° 1/4"- 80° 5/16" - 70° 3/8" - 60° 7/16" - 45° 1/2" - 30°
Print approx. €8.61–€10.53 excl. taxPreliminary estimate for PETGSource material: PET
A carriage for the laser module for the Sainsmart Genmitsu 3018 CNC router. Slides on to the front of the motor bracket and tightens against it. Includes air-assist conduit. I use a board on the bed that extends at the front by 40mm to…
Print approx. €4.67–€5.70 excl. taxPreliminary estimate for one variant
Sprouter for microgreens and wheatgrass. Sprouts such as radish, soy, brocoli and wheatgrass have amazing health benefits, they're also easy to sprout with a kit like this. The stand is designed for glasses with approx. 80 mm diameter.…
Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant
My dad taught me that a Wifi router will work better if mounted higher up in a room/house. I love my TP-link Deco mesh network router, but it did not have a way to mount it to the wall. This mount has plenty of room for network and power…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Collector to gather most of the dust when using a trim router table. Connect to festool 27mm cleantec hose. Several solutions were considered, but using 4 magnets if good enough. A rockler universal rail (3/8 in thick) is too much for…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
This case fits the following combination of parts: Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (https://www.dfrobot.com/product-2242.html) Waveshare 19623 CM4-HEATSINK Raspberry Pi Compute Module 4 Four 15x2.5mm standoffs…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
Have create this mount to hold the Edge router X SFP with psu in the back to mount in a 10 inch rack. there is a clamp with that needs 2 screws in 3x10mm to mount the edgerouter X SFP securely so it doesn't move around when plugging and…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
As an alternative to bowtie or butterfly inlays I made this Barbell Router template. I included the inside of the inlays to layout the placement of the inlay. I sized the insides .1mm smaller for tolerance. Makes and Comments Appreciated!…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it. Allows for a very flexible Z-axis rough adjustment: You can insert the bracket into…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
A simple bracket to allow you to wall mount a Unifi EdgeRouter-X while keeping access to the ports clear from obstructions. Print two and mount the ER-X such that the ports exit the bottom of the device. Note: One pair of rubber feet will…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
These are mason jar inserts for rooting bulb type plants prior to planting. There is a model for both narrow mouth and wide mouth mason jars. You can use them to root, onions, garlic, potatoes, sweet potatoes etc. The onions in the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
I needed a box to store the 5 piece router bit set that I bought from Harbor Freight so I remixed a model and made this box. Should fit all the bits nicely, although I was a bit generous with the clearance for the shanks I think (8mm for…
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for one variant
I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…
Print approx. €7.72–€9.44 excl. taxPreliminary estimate for one variant
Needed to deepen the subwoofer in to the front of the speaker box so i made a guide for the router. you need a 5mm bolt and a 5mm drill the routerbit is 12mm wide
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for PETGSource material: PET
A little storage solution for holding your router cutters. Currently have 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 1/4 inch, 3/8 inch & 1/2inch. Also 2 types of trays to store small parts and collet storage for ER16 & ER32 All are available…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Hi everyone, just use standard PLA - no need for PETG or more expensive filaments. This is the routerbit set, which it is designed for: https://www.bosch-professional.com/de/de/sets-fuer-verschiedene-anwendungen-15-teilig-2867965-ocs-ac/
Print approx. €5.88–€7.18 excl. taxPreliminary estimate for one variant
These baseplates replace the stock baseplate and integrate a bushing for use with templates. I use these for engraving bits which don't have bearings. It can be hard to see what you are doing with dust extraction so I printed one in…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 20 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG, modified and tested so it can be printed without any supports, with the wall/furniture facing side on the bed. It may be too wide for some printers (225mm) but can be shortened to 220.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Egy tartóelem az általában panelházakban megtalálható DIGi által adott Huawei routerekhez.
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Optimal mit einer externen Führungsschiene
Print approx. €4.55–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
This adapter will fit on the end of the Kreg router table fence after removing end cap. Just drill holes that line up with fence and attach. I have used it for about 1 month now and works great. Keeps the dust out of the inside of the…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET
Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
The outer ring of a friends telescope golf ball collector broke off. I designed and printed a suitable spare part, so I could repair the collector. 0. Preparation To take off the original outer ring from the telescope rod, you carefully…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
My air compressor misses a proper air filter. A filter of a gas mask can be used as a replacement.
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
Drilling into the phenolic top is a giant pain, and if you mess up you have ruined the top. I wanted to use the predrilled holes in the table to mount my dustright dust collection box, but none of the holes lined up. So I modeled the…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
base was made in half-size (21mm) grid as my other router trays are also 9 half-tiles long and it seemed to be a good size. It fits on a normal 42mm grid. If you want to design something yourself the plane should fit on a 4x4 42mm grid;…
Print approx. €8.18–€9.99 excl. taxPreliminary estimate for one variant
6x6 CNC router bits holder for 6.35mm or 1/4 inch diameter, 1/8 inch or for 14x14mm bits housing.
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
The OpenWrt One router has a m.2 slot (m-key) normally meant for an SSD but it is possible to use a network adapter instead. This model s a side box that houses the network connector for the m.2 network card. No supports required when…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
In combination with some common plumbing parts, this print allows you to connect your EasyGreen EGL sprouter to your mains water supply so that you don't have to top up the water reservoir by hand. Great for general ease of use, essential…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
This is a square base that I made for my Performax trim router. This is a store brand for Menards home centers. It looks identical to the Makita RT0701C, so it might fit that router as well. I included the technical drawing that lays out…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
I want to make a dust shroud to protect the router in the router table from dust so I started by modeling the body of the router and making a cylinder clamp to attach to it. I made one with a relief hole for the power cable that can sit…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Tento model slouží jako stojan pro WiFi router , který zlepšuje odvod tepla a stabilitu zařízení . Zvýšená konstrukce umožňuje lepší proudění vzduchu , což pomáhá snížit přehřívání a tím zlepšit výkon a životnost routeru. Vlastnosti: ✅…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Replace to provided exhaust port with a Festool Cleantec compatible one.
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
Taking off from this design (and with thanks to its designer ) , I developed my version of a Router Table type attachment for a Dremel 3000. The most major change I made was moving the height adjustment from the threaded "throat"…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
I wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table. I also…
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Suggested Build Instructions: Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) https://atomicfilament.com/products/carbon-fiber-black-petg-pro Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be…
Model size: 180x400 mm Wood used: White Pine, White Maple Stain used: Golden Pecan CNC machine used: DIY CNC Router CNC Process: For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link ). At 500-1500mm/min…
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
This is a reinforced version of UDM mount by Revnull. Who's desighn while elagent and well desighned is lacking structulary. So to prevent a repeat of the brackets snapping i have redisghned it to have quater circle reinforcemnets up each…
I changed the shape of the lid and the most outer maze.
router attachment for dremel
This is an insert / organizer for Star Wars Outer Rim with the Unfinished Business expansion. It supports premium sleeves on the cards (Paladin Gawain sleeves shown in the images), supports vertical storage, has no lid lift, and was…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Corner radius router jig with changeable inserts. Can be clamped to the work piece to use with a handheld router. The base is design to accommodate track saw clamps (slots for the clamps are 12mm wide, 7.5mm deep) Inserts are available in…
A very simple yet elegant stand for the iPhone - specifically designed for the iPhone 12/13 Mini initially, but works for all MagSafe iPhones (Not sure about the new 15 Pro Max, that might be slightly too tall in vertical mode; it will…
This wall mount is designed for the Wi-Fi router for the 2nd Gen Starlink kit . Cables can leave the back or the bottom. Designed so the back of the router is vertical. The four holes in the backplate are M5 sized . Optimized as much as…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
I find the original design really good but did a remix to add some features. I simplified the slots for the clamps to be square to fit my Metabo clamps. The Jig now also prints without supports. I made the Jig Modular so I do not have to…
(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…
Router Radius Jig / Template with mountable holder R5, R10, R15, R20, R25, R30 Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Infill: 40% Category: Hand Tools
I built a DIY router table a while back and needed a connector for my regular old shop vac (I don't own a fancy dust extraction system with 100 mm hoses ;-) The part prints without supports and can be screwed right into your fence without…
02.04.2024 Big Update on and Attention about Model I Have to apologize as I discovered that I have made a big unforgivable mistake on this model. Mess up with Radius sizes took a place. So please if you have downloaded this model before…
A holder for router router bits with a ¼" shank. There are 4 mounting holes. I attached mine up and out of the way with (4) #10 wood screws. Update on 12/28/2025: Added two new versions for 1/2" router bits. The shank hole diameters are…
Here's a video further explaining and demonstrating the tool: An adjustable router plane, inspired by the one designed by Paul Sellers, but can accept a chisel for the cutter, and with ergonomics similar to the Veritas large router plane.…
Stackable Storage Boxes with Ribbed Design Keep stacking until you can't stack anymore! These stackable storage boxes feature an attractive ribbed outer design that provides a pleasing look and feel. Designed for fast printing with a…
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Adapter for makita/Festool guiderail which fits the Makita router. I used two dowel pins Ø8mm for the connection between the adapter and plungbase.
Just squeeze router on router base. Print with less support possible!
Quick model up I did of the Eye of the Universe symbol from the Outer Wilds video game. I found an image online, traced in inventor, and then added the disc behind to hold together all the disconnected sections. The disc is not centered…
Store your ¼ inch router bits neatly in these gridfinity bins. Two size options one fits 13 router bits and the other can fit 25, both in a 3 x 3 gridfinity sized bin. Available with and without magnet holes in the bottom.
Gridfinity compatible storage for router bits, with a label slot for a 37x12mm label, such as Brother/Dymo's 1/2" labels. Label is retained in the slot with a small lip, no adhesive necessary, but won't accidentally fall out. Two concave…
I made this enclosure to house a Raspberry Pi and network switch that I use as a router. It includes spots for a button, OLED screen, and intake fan. Checkout my website for all of the parts and info!…
A simple, modular system for adding rounded edges to your woodworking projects. This kit includes a base, swappable templates, and a wall mount for storage (up to 16 templates). Features Swappable Templates: Includes files for 5 mm to 80…
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
Projekt nakładek na tekturowe rolki filamentu, zapobiegający blokowaniu się filamentu podczas cofania/przewijania w ACE Pro. Projekt na którym się wzorowałem tutaj:…
