Search results: owden

Sort order

Counting matching models…

P
Printablesedgett

Sunlu S2 Bowden Adapter

Add a Bowden tube to your Sunlu FilaDryer S2 using this improvement wedge and a M10 Pneumatic Fitting. This remix of RENOxDECEPTION's "Sunlu FilaDryer S2 Improvement Wedge W/M10 Thread + PTFE Tube" simply adds a few fillets to soften the…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
837
Likes
105
Rating
5
P
PrintablesKlaus

Choke bowdencable screw / Befestigungsschraube Choker Seilzug - Mikuni BST33

After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
6
Rating
5
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
21
Rating
5
P
PrintablesCupertinoGeek

Dual Reverse bowden PTFE- tube Guide

Based upon the Prusa Enclosure PTFE-tube Guide by Karza. My remix is a Dual Reverse PTFE-tube Guide. The guide is meant to provide an extra roll of filament in the ready for filament color and runout changes. Please Like and Post your…

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
19
Rating
4
P
PrintablesGraloth

MK4 Reverse Bowden Adapter - Coupler edition

The original model had the PTFE tube feed directly into the print, which works fine, but I wanted one that supported PTFE couplers. I have not tested it yet, but I modelled them so they should fit. There is a version for the M10 coupler…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
13
Rating
5
P
PrintablesMartin v R

Ender 3 V3 SE/KE Reverse Bowden + filament sensor mount

Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
16
Rating
5
P
PrintablesFraser Rose

Reverse Bowden Adapter

This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
2
Rating
0
P

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
5
Rating
0
P
PrintablesZzoyozZ

Bowden Y-Splitter for Bambu Lab X1

Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…

Downloads
17,345
Likes
1,709
Rating
4.77
P
PrintablesGalvanic

Voron Bowden ptfe tube guide arm and canbus cable support

V2- PTFE bowden tube guide and CANBUS wire support **** 7NOV24 -Removed a zip tie hole on the long arm's that was a weak point **** I've made some adjustment after some feedback from the community. Changes made over V1: Added a option to…

Downloads
13,610
Likes
686
Rating
4.91
P
PrintablesSHaDoW6

K1 Bowden Tube Clips

K1 cable chain clip to allow placement of the bowden tube on top of the cable chain. If your have extrusion issues this may help with the addition of a lid riser. Updated: As requested I have created a side mounted clip. Please don't…

Downloads
6,981
Likes
555
Rating
4.95
P
PrintablesSHaDoW6

K1 Max Bowden Tube Clips

Made this clip for the K1 Max, from my original clip for the K1, it now is more compact, with rounded corners on top and tighter tolerances to fit snug. Have also included a newer slim model. I found that the original bowden tube clips,…

Downloads
5,539
Likes
494
Rating
4.9
P
Printablesfirstgizmo

PTFE bowden tube connector

This connector needs no extra hardware parts and is used to connect your bowden tubes together. Due to its mechanism, one is able to connect/disconnect the tube by simply twisting the screw cap a little. If you have to modify it to your…

Downloads
3,749
Likes
442
Rating
4.91

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Downloads
3,715
Likes
520
Rating
4.89
P
PrintablesMarko Borsic

PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…

Downloads
3,665
Likes
543
Rating
4.8
P
PrintablesMrFlippant

Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament

Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…

Downloads
3,594
Likes
2,202
Rating
4.93
P
PrintablesZzoyozZ

Bowden Tube Y-Splitter with PC4-M6 Connections

Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…

Downloads
3,233
Likes
436
Rating
4.82
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Downloads
3,074
Likes
411
Rating
4.96
P
PrintablesMoshe

Creality K1C/K1/K1 Max Rotating Bowden Clip

A print in place rotating clip for the K1 series bowden tube, easy to print, easy to use.

Downloads
2,971
Likes
298
Rating
4.89
P
Printablesroot Dsigns

Ender 3 V3 SE / Ender 3 SE Reverse bowden adapter

Replace the toolhead cable clip with one with M10/M6 thread to fit a reverse bowden system. M10 racor is highly recomended! M6 racor is not recomended because it ads too much drag on the system so the filament do not run smooth. PTFE tube…

Downloads
2,813
Likes
443
Rating
4.96
P
PrintablesLaisch

PTFE Bowden Y Splitter (3 way)

I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…

Downloads
2,745
Likes
586
Rating
4.84
P
Printablesscmanjarrez

Trianglelab Bowden Clip

TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…

Downloads
2,575
Likes
124
Rating
4.77
P
PrintablesSshubam Verma

Creality K2 Plus Bowden tube protector

This model was provided to me by Creality support to fix the broken pneumatic connector on top of the extruder of the Creality K2 plus . You can also print this to prevent your pneumatic connector from being damaged over time on the top…

Downloads
2,504
Likes
170
Rating
4.56
P
PrintablesLucio Badtaste

K1(C-Max) Bowden Tube Guide for Nu-K Riser (et similia)

I liked a lot the original print but I wanted the tube at the same height of the hole in the back of the lid riser (in my case the Nu-K that has it placed ~20mm higher than the chain). I suppose that it should fit on the K1 Max cablechain…

Downloads
2,209
Likes
259
Rating
5
P
Printablesark76

Ender 3 V3 SE/KE filament guide (bowden + runout sensor)

A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…

Downloads
2,175
Likes
299
Rating
4.88

V0 Upper-Rear Bowden Inlet (URBI) for Voron V0

V0 Upper-Rear Bowden Inlet (URBI) A Reverse Bowden Inlet for the upper-rear panel of the Voron Zero with an optional filament sensor. There are 6 Variants: URBI - The basic, just a hole to pass the bowden tube through. URBI-PC4 - with a…

Downloads
2,116
Likes
394
Rating
5
P
PrintablesRobertoooo

Creality K2 Plus add-on to prevent extruder bowden connection damage v2

Use this to prevent damage to your Creality K2 Plus extruder's bowden connector, which may fail if the PTFE tube becomes loose from the cable chain and starts wobbling tearing itself out, damaging the connector teeth. Note: If you already…

Downloads
1,785
Likes
214
Rating
4.85
P
Printableskolba

Bowden collet

its that thing p.s. to prevent people from being upset - i've no idea if it fits e3d v6 or not. naturally the printed version is not as good as the real thing, but works as a temp solution while you are waiting for a pack of 50 of them…

Downloads
1,710
Likes
111
Rating
3.89

Creality K1 Reverse Bowden PTFE Tube Clips

Wanted to free the reverse Bowden PTFE tube on my Creality K1 printer.

Downloads
1,664
Likes
145
Rating
5
P
PrintablesSHaDoW6

Creality K2 Plus Bowden Tube Clips

Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…

Downloads
1,575
Likes
155
Rating
0
P
PrintablesG4ZO

Bowden Clips

Height: 1.5 mm. It is possible to print in resin or FDM

Downloads
1,549
Likes
196
Rating
5
P
PrintablesPlebsoon

creality ender 3 5 e3d v6 hotend cooling and mount bowden

hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…

Downloads
1,545
Likes
176
Rating
5
P
PrintablesSilencedFrost

UBBI - Universal Bidirectional Bowden Interconnect - an overengineered PTFE tube quick connect

Want a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself? Want a universal connection that can act as an extender, terminal at the same time? Want…

Downloads
1,506
Likes
265
Rating
5
P
PrintablesSandon

Fix for Creality Space Pi - bowden tube filament holder / adapter / guide

Improves the silicone rubber bushings that ship with the Space Pi Dryer and Space Pi (Plus). Designed to hold the end of the PTFE tubing in place, and prevent it from slipping inside the dryer. Does NOT work with the Space Pi X4. Internal…

Downloads
1,371
Likes
139
Rating
5
P
PrintablesCrydTeam

anycubic vyper / kobra stealthburner mod (bowden and direct extruder)

Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…

Downloads
1,323
Likes
166
Rating
5
P
PrintablesScharrelese

Ultimaker Style Bowden Clip

This is a quick and easy printable clip designed to hold the bowden tube of your Ultimaker in place. After inserting the tube into the fitting, pull it up and put the printed clip underneath the collet to secure the tube in place.

Downloads
1,281
Likes
64
Rating
4.86
P

Remix - Clip added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor

Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…

Downloads
1,277
Likes
156
Rating
5
P
PrintablesHiddenP56

Bowden Tube/Cable Clip (Ender 3, 3Pro, 3v2, CR-10, Voxelab Aquila)

Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…

Downloads
1,220
Likes
185
Rating
5
P
PrintablesCarlos Guerrera

AD5X 4-in-1 Bowden (PTFE) Tube Clips

4-in-1 Bowden (PTFE) Tube Clips Tidy up your AD5X' PTFE tubes with these clips. 5mm and 10mm versions. Prints in about 3 and 5 minutes respectively. Good project for left-over filaments.

Downloads
1,195
Likes
142
Rating
5
P
PrintablesMartin_au

Sunlu S2 reverse bowden adaptor

Technically not a remix, but the concept is similar enough to VoltexRB's work that I've nominated it as such. Basically works the same as their version, but has a slightly better fit and deeper grooves to make it harder to come loose.

Downloads
1,159
Likes
172
Rating
4.94
P
PrintablesFreshPrints

Anycubic Drybox Filament Sensor Bracket v4 PC4 M10 Reverse Bowden Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…

Downloads
1,144
Likes
128
Rating
5
P
PrintablesDune

Ender 3 v2 Bowden Clip

Ender 3 v2 Bowden clips. I used the MIKA3D Silk Copper because I was at the end of the spool and didn't feel like changing out. In the future, I would probably use Hatchbox Black. I would also probably change the quality from 0.2 to 0.16…

Downloads
1,099
Likes
171
Rating
4.71

Neptune 4 Reverse Bowden Upgrade

These brackets allow you to use a reverse Bowden tube to stop the filament from pulling on the extruder and giving inconsistent extrusion. This increased print quality significantly for me. Designed to be used with either my Neptune 4…

Downloads
1,092
Likes
247
Rating
4.73
P
PrintablesIconic FAB

Bowden tube and CANbus / USB cable support clips

Bowden tube and CANbus cable support clips. Oftentimes switching from conventional setup of gazillion wires into cable chains is a bit tough as there are certain challenges with this. Small things can make big difference. Challenge this…

Downloads
1,090
Likes
220
Rating
4.94
P
PrintablesSam Wolfson

Voron 2.4 Threaded Bowden Retainer

This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…

Downloads
1,076
Likes
197
Rating
5
P
PrintablesTomTom

Ender-3 Sprite (Pro) - Reverse Bowden (PTFE) Holder

holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer

Downloads
1,067
Likes
139
Rating
4.71
P
PrintablesHwGeek

Creality K1/MAX Bowden Tube stress relief

I just got the Creality K1 and I wasn't happy how they plugged the Bowden tube, there is too much force/stress on the plug on top of the extruder while it moves, So I designed this simple part to be fixed by the Drag Chain screw. Just…

Downloads
1,016
Likes
90
Rating
5
P
PrintablesArtSuzhou

Solder Scroll with PTFE Bowden tube tip

The tip is modified to house a 30mm PTFE Bowden tube to help apply the solder close to the components.

Downloads
1,007
Likes
419
Rating
5
P
PrintablesRobertoooo

Creality K2 Plus bowden tube clip

This is a narrower bowden tube clip to hold the PTFE tube on top of the cable chain so that it doesn't touch the glass. The original factory K2 Plus clips tend to release and slip off the chain after a while, and misplacing them limits…

Downloads
992
Likes
111
Rating
4.5
P
PrintablesOliver Thomsen

Prusa MINI PC4-M6 Bowden Fitting Adapter

Always liked those quick release bowden fittings, but unfortunately the regular sizes (M6/M10) don't fit on Prusa MINI. So I decided to make an adapter. UPDATE 24.07.2020: Stretched the hex-nut a bit, so that the transition between thread…

Downloads
992
Likes
121
Rating
4.81
P
Printablesdhoard

Ender 3 V3 SE - Z axis reverse Bowden mount

Ender 3 V3 SE - Z axis reverse Bowden mount used in combination with https://www.printables.com/model/602032-ender-3-v3-se-ender-3-se-reverse-bowden-adapter and a spool holder to move the spool from the top of the printer to the right…

Downloads
977
Likes
153
Rating
5
P
PrintablesNeumo

Bowden Panel Passthrough

This model is designed to mount on a 3mm panel and comes in three angles relative to the panel 0°, 30°, and 45°. The mounting pattern is an equilateral triangle with sides of 26mm. You will need to drill three 3mm (or 1/8") holes and one…

Downloads
974
Likes
195
Rating
5
P
Printables3DPR

Voron Bowden Top Pass Through

This is a bowden pass through for the bowedentube on Voron printers. I have a 350mm sized voron and It bugged me that the spool is so far in the back. putting a hole in the side panel to pass throug the bowden was no potion because this…

Downloads
960
Likes
211
Rating
5
P
PrintablesJohnM

Prusa i3 Mk3 reverse Bowden extruder PTFE connector

This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…

Downloads
957
Likes
115
Rating
5
P
PrintablesAlan

Bowden Guide/Support for K1 MAX

This an alternative version. Adapted from another contributor.

Downloads
951
Likes
56
Rating
5
P
PrintablesTek

Creality K1 / K1 Max / K1C beefed up chain + integrated bowden clip

A beefed up chain with stronger parts which will not break easily. Tested over hundreds of hours, printed with Sunlu ABS. No supports needed, print orientation as provided (opening for cables face down). Chain link with bowden tube…

Downloads
918
Likes
115
Rating
5
P
PrintablesThuWe

K1 / K1 Max Bowden Clip

Category: 3D Printer Accessories

Downloads
905
Likes
77
Rating
5
P
PrintablesThiago Fonseca

Bowden tube insert for creality filament dry box 2.0

An insert for the Creality filament dryer to securily attach a 4mm bowden/PTFE tube. It should be a perfect fit for the dry box hole and a tight fit for the bowden tube. If not, the fit can be tuned with a 4mm drill bit and glue The…

Downloads
902
Likes
123
Rating
4.89
P
PrintablesTheHamburglar

Low Profile PTFE Bowden Tube Connector Fitting

Print at lowest layer height you can.

Downloads
898
Likes
107
Rating
4.91
P
PrintablesDarrin

Sunlu S2 10mm Bowden Adapter/Wedge

Sunlu wedge/filament guide/bowden adapter for the S2 drier. Keeps filament at a natural unspooling angle for less resistance and in a better location than the factory hole. Threaded for 10mm fitting. Wedge allows humidity to escape.…

Downloads
882
Likes
132
Rating
4.86

Bowden PTFE Coupler Clip (3 thicknesses)

Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…

Downloads
871
Likes
65
Rating
4.67
P
PrintablesGoodHope

Bowden Y-splitter for Qidi Box (AMS) , PC4-M6

I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…

Downloads
849
Likes
114
Rating
4.85

4-way Bowden Connector

I created a handy 4-way Bowden splitter that's perfect for my MMU project. It works well with different kinds of printer setups too. This gadget simplifies handling several filaments at once, making your printing smoother. You can quickly…

Downloads
844
Likes
461
Rating
4.33
P
PrintablesDennis Bauer

Bowden Guide with 360° Print-in-Place Joint

https://github.com/DeBau/VoronMods/blob/main/Top%20Bowden%20Guide/Pics/TopView.jpg BOM 2-3 x heatset inserts M3x5x4 2-3 x M3x8 - 16 SHCS for Bowden Coupler Version BSP 1/8 Bowden Coupler for Glue Version 3M VHB Tape Required parts Version…

Downloads
811
Likes
185
Rating
5
P
PrintablesLinus

Core One PTFE Bowden Tube Connector Mod

tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…

Downloads
802
Likes
297
Rating
4.76

Sovol SV06 / Plus Bowden Tube Mount

Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler

Downloads
797
Likes
134
Rating
5
P
PrintablesDominik Knoll

Snapmaker U1 Bowden Clip

German: #Beschreibung Der Bowden Clip für den Snapmaker U1. Ideal zum Ersetzen bei Defekt oder um die vorhanden Clips zu erhöhen. Druckeinstellungen Druckmaterial: PETG (für offenen Drucker) - (ASA für Geschlossen) Layerhöhe: 0,2mm…

Downloads
790
Likes
167
Rating
5
P
Printablesjphalip

ECAS04 Bowden/PTFE Tube Coupler

This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…

Downloads
789
Likes
66
Rating
5
P
PrintablesGulsifer

Rookery Bowden tool head

This is a tool head designed for an ender head with a volcano heat block. here is the BOM (1) 3010 fan (2) 3010 blowers or 4010 blowers (3) M3x6x5 heat inserts (2) M3x4x5 heat inserts for input shaper - Optional (2) M3x4x5 heat inserts…

Downloads
787
Likes
98
Rating
4.78
P
PrintablesSteve Eglon

AD5X/AD5M/AD5M Pro Bowden Clip and Improved Fan Retainer

The AD5X is a great machine but like any there are always little niggles which can be improved upon. The Bowden clip which retains the 4 in 1 filament feed tube is small and fiddly to remove. The model attached is longer and still fits…

Downloads
772
Likes
86
Rating
5
P
PrintablesZzoyozZ

Clean Bowden Y-Splitter

Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…

Downloads
767
Likes
92
Rating
4.63
P
PrintablesMatS

K1 Max Drag Chain Bowden Tube Clip

This is a drop in replacement of original K1 MAX bowden tube clip. Print it on the side with a brim. No supports are needed. I printed it with 0.2mm layer height, 3 wall loops and 4 bottom and top layers and it works great.

Downloads
755
Likes
56
Rating
5
P
PrintablesRGabor

Ender 3 V3 SE Reverse bowden adapter no fitting mod

I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…

Downloads
745
Likes
102
Rating
4.9
P
Printablesasm2750

Creality Space Pi Bowden Coupler

v2.0: Updated to be more like the design I did for the Polydryer. The updated design includes a 3d printed nut for stronger attachment. I noticed after a while the 1.0 version in PLA would get loose when heating ABS and ASA. It's…

Downloads
744
Likes
98
Rating
5
P
Printableslochej

K1 (K1 Max) Bowden tube guide

Remix to improve a bowden tube guide from Rileyprints3d on Creality Cloud. Meant to be used with a riser.

Downloads
741
Likes
60
Rating
5
P
PrintablesHenlor

Creality K1 Extruder Cover with stock or pneumatic bowden fitting

This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…

Downloads
739
Likes
193
Rating
5
P
PrintablesJoe the Builder

AD5X IFS bowden tube Clip

Help with tube and cable management, by making the tubes a tight bundle you are able to get a better gradual sweep to help with filament feed, the longer on goes but the 4 n 1 adapter this keeps a slight sweeping of the tube for…

Downloads
738
Likes
78
Rating
4.8
P
PrintablesNavierIsStoked

Sunlu S2 Wedge With Angled Bowden Pnuematic Fitting

I recently added a Micro Swiss NG to my Ender 3 V2. I am going a reverse bowden route, with the eventual goal of printing some more hydroscopic filaments. So i purchased a Sunlu S2 filament dryer and used my long Capricorn tube to feed…

Downloads
724
Likes
111
Rating
4.89
P
PrintablesIceman

Ender 3 V3 SE Spine cable chain - Top with with M10 Reverse bowden adapter

Printed in PETG 0.2 layer height 4 walls 30% infill Supports - on build plate only

Downloads
722
Likes
97
Rating
4.75
P
Printablesdancan13f

Prusa Core One/+/Gen2 Bowden Bend Remix

Inspired by " Core One modified bowden-bend with wider radius " by @Petehagoras. RELEASE 27/07/2025 New slightly lower version (-1mm).

Downloads
712
Likes
175
Rating
4.74
P
Printablesyoni

4 to 1 bowden/ptfe tube joiner/splitter - Straight Top

As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.

Downloads
712
Likes
81
Rating
4.67

[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…

Downloads
709
Likes
118
Rating
5
P
Printablesjeracom
Downloads
709
Likes
70
Rating
5
P
Printablestimeshock6

MK4 Reverse Bowden Adapter (attaches to PC4-M10 or directly to your 4.1mm OD PTFE tube)

The Prusa MK4's extruder filament inlet has a threaded M5 hole for which Prusa provides a Festo QSM-M5 fitting to use with MMU3. This model replaces the QSM-M5 in a reverse bowden system for the MK4. The adapter is designed to take a…

Downloads
695
Likes
105
Rating
5
P
PrintablesK3DD

Bowden Tube Y Splitter remix

Habe hinten 3 Aussparungen für Magnete 6x3mm hinzugefügt. Ausserdem die Bowden-Eingänge mit “AMS” und "EXT" beschriftet. Das ganze ist MMU und AMS tauglich. Kann also als Multimaterial-STL gedruckt werden. Remix von…

Downloads
687
Likes
46
Rating
5
P
PrintablesKameo

Prusa MK3S Reverse Bowden and filament cleaner

Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15%…

Downloads
663
Likes
70
Rating
4
P
PrintablesPhilip Everts

Bowden Tube Clip

Allgemeines: Das Modell sichert die Bowden Tube in dem Fitting und sorgt somit, dass die Bowdentube nicht ausersehen rausrutscht. Ich habe das modell an PC-M4 und PC-M10 ausprobiert. Der Unterschied zu anderen Modellen dieser Art ist,…

Downloads
662
Likes
37
Rating
5
P
PrintablesAinon3Dtisk

Anycubic Kobra 3 Combo vedeni bowdenu

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás další díl na mojí oblíbenou Kobru 3 Combo. Jedná se o vedení bowdenu, pokud mate tiskárnu pod ACE. A tim pádem ACE pro je nad tiskárnou. Díky mému vedení vám už…

Downloads
657
Likes
104
Rating
0
P

K2 Plus - Correct thread pitch- Extruder Cover to bypass broken Bowden Tube connector

I am not the original designer, I just changed the thread from M10 to BSP 1/8" (the correct thread for P4 M10 connectors

Downloads
641
Likes
98
Rating
5
P
PrintablesDenialE

Ender 3 Max extruder bowden coupler

When cleaning out a clog I accidentally broke the coupler that attaches the bowden tube to the extruder on the Ender 3 Max, so I modelled a new one. After 3–4 iterations it came out pretty good. Insert the coupler into the extruder and…

Downloads
623
Likes
40
Rating
5
P
PrintablesDarkstar

Prusa i3 MK3S(+) - Reverse bowden set

Update 13.04.2023 -Added left side version with correct thread. Reverse bowden set for Prusa i3 MK3S(+). Includes modified OEM Prusa i3 MK3S+ top right z-mount and fs-cover with additional mounting points for PC4-M10 quick fitting…

Downloads
620
Likes
107
Rating
4.94
P
PrintablesAXIOM Prints

Creality K1 Cable Chain Bowden Clip

Does not catch on the modified (raised) lid Не чіпляється за кришку як інші тримачі трубки Nezachytává se o víko jako ostatní držáky

Downloads
614
Likes
67
Rating
4.5
P
PrintablesHelixios

Remix - PTFE Secure Fitting added - PTFE Bowden Tubing Adapter for Elegoo Centauri Carbon Filament Sensor (with Clip)

Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…

Downloads
613
Likes
74
Rating
5

Wall mounted spool holder with PTFE edge and optional filament bowden guide

It's a very simple spool wall mount. Insert a PTFE tube into the hole on the front and push it to the very end, then cut off the excess. Spools glide really good and self-center. The optional guide is printed in one piece. You need to…

Downloads
612
Likes
83
Rating
4.67
P
PrintablesDan Greco

Sprite Pro Reverse Bowden

This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…

Downloads
611
Likes
85
Rating
5
P
PrintablesVertigoMakes

INDX Filament Sensor Bowden Adapter - ECAS04 & PC4-M10

Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…

Downloads
599
Likes
184
Rating
5
P
Printables72pxldotcom

Bowden PTFE Coupler – ECAS Twist-Lock Magnetic Coupler

Magnetic twist-lock connection for PTFE/bowden tubes. Parts 2 x 6x3mm magnets 2 x ECAS Connectors 2 x Printed parts (ecas magnetic coupler) Assembly All items are press fit, but might require tuning Magnets should be inserted in opposite…

Downloads
592
Likes
125
Rating
4.91
P
Printablesasm2750

PolyDryer Bowden Coupler/Nut

I created a coupler in Open SCAD that uses a PC4-M10 fitting with a seat at the end of the coupler for a reverse bowden tube to rest on to prevent the tube from moving further in. The design is threaded for a matching nut that is also…

Downloads
582
Likes
97
Rating
4.94
P
PrintablesOliver Thomsen

Prusa MINI PC4-M10 Bowden Fitting Adapter

Finally made a PC4-M10 adapter for push-through bowden fittings. I use it on the extruder drive, so I don't need that extra small piece of bowden tube.

Downloads
577
Likes
76
Rating
4.91
P
Printableskhrillian

Bambu X1 bowden tube reinforcement / strain relief

The Bambu Lab X1 & X1 Carbon use a PTFE bowden tube to guide filament to the print head. There is a little bit of wiggle, which causes the tube coupler to dig into the tube over time. I was never very happy with the amount of play allowed…

Downloads
576
Likes
120
Rating
5