Search results: p5

Sort order

611 models

P
Printablesmichalgerhat

Airsoft MP5 Flashlight Handguard for SureFire weaponlights

Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…

Print approx. €8.89–€10.87 excl. taxPreliminary estimate for one variant

Downloads
1,253
Likes
129
Rating
5
P
PrintablesFoxVirus

Arris VIP5202 (2021 KPN decoder Set-top box) wall mount

A wall mount for the Arris VIP5202 set-top box, known as the former (2021) set-top box of KPN, (4K version, not sure if this matters). Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…

Print approx. €6.93–€8.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
1
Rating
0
P
Printableshuberjer

Fingerprint Scanner Mount for Verifi P5100 for Win 11

I designed this mount so I can have my Windows 11 fingerprint scanner attached to the underside of my desk. The previous scanner I had was smaller and hot gluing it to the underside of my desk worked fine. This new scanner, which works…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
4
Rating
0
P
PrintablesRADdesign

P51D - Mustang RC Plane

This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA. This model…

Downloads
14,022
Likes
2,092
Rating
4.6
P
PrintablesBONK BOY

MP5 and MP5K for Carbon/Dummy 13 Beta + V1/extra (Foregrip, Skeleton stock, Stock, Drum mag, etc) gun

The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…

Downloads
2,516
Likes
586
Rating
4.86
P
PrintablesLimaMike3D

Aircraft wallart series P51 Mustang

Wallart or decoration of the legendary P51 Mustang. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files).

Downloads
1,542
Likes
270
Rating
4.83
P
PrintablesLimaMike3D

Aircraft Wallart Series P51 Mustang (Large)

Large version of my P51 Mustang Wallart, fits together with superglue. I used poster gum for mouting on the wall. Very simple print. Can be scaled, files alerady max out MK3s print bed.

Downloads
1,238
Likes
308
Rating
5
P
PrintablesAlex Huysegoms

Base plate for the Honeywell DCP311 / DCP511 / DCP911 doorbell button.

The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…

Downloads
1,187
Likes
31
Rating
5
P
PrintablesTheCafeRacer

MP5 Magazine Loader

(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…

Downloads
1,174
Likes
92
Rating
5
P
Printables3DLabPrint

P51-D Mustang

This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/p51-d-mustang/

Downloads
1,113
Likes
152
Rating
0
P
PrintablesTohmis

GP5 Filter

I couldn´t find any 3D printable models for the GP5 filter so i created my own one. The bottom part (bot) clips into the top part after printing. The top part should be printed with the thread pointing up. The bottom part should be…

Downloads
1,101
Likes
46
Rating
5
P
PrintablesMortalWombat

Kingroon KP5L Starter Kit & Klipper Config

The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…

Downloads
1,071
Likes
41
Rating
5
P
PrintablesUPWDesign

NP5 GRYPHON REMIX (SOLENOID AND MANUAL)

**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…

Downloads
1,038
Likes
173
Rating
5
P
PrintablesAndersNygaard

USB-C portable adjustable PSU DSP5005

Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…

Downloads
970
Likes
1,054
Rating
4.67
P
Printablesmichalgerhat

MP5 Mag Insert for STANAG (M16/M4) Mag Pouches

I just added an MP5 to my airsoft collection, but all my gear is made to carry STANAG (M16/M4) magazines. Two of the slimmer MP5 mags fit in a STANAG pouch together, but take one out and the other will flop in the pouch freely. That's why…

Downloads
780
Likes
82
Rating
5
P
Printablesglgr

MP5 Curved Airsoft Magazine (fits Mosquito)

INTRODUCTION I couldn't find a nice curved (and free) MP5 magazine for my Mosquito so I created my own. Feel free to try it out and complain if you have issues. STEP files now available. The model is based on two existing models: - BB…

Downloads
780
Likes
141
Rating
5
P
PrintablesAHMan

MP5 Straight Mid-Cap Short/Standard Length Magazine (CYMA; Fits Mosquito Open Beta 2)

I was recently inspired by glgr with his curved magazine creation https://www.printables.com/model/938167-mp5-curved-airsoft-magazine-fits-mosquito) and saw there was not a 3D printed straight magazine for the Mosquito Open Beta 2, so in…

Downloads
695
Likes
89
Rating
5
P
Printablesjoseph james

m4 to mp5 speedloader adapter (airsoft)

Made to work with Ludex m4 and m16 speed loader, also works with Oden M12. Should work with other sidewinder clones. Ludex m4 mag speed loader Oden Sidewinder m4 mag speed loader I designed this to have an easier and faster way to load my…

Downloads
689
Likes
69
Rating
5
P
Printableslfpoulain

PowerBank - IP5328P - 1S

Un chargeur portable puissant et pratique, parfait pour les urgences ou les déplacements. Nous avons utilisé une batterie 18650, choisie pour sa capacité élevée (jusqu'à 3000 mAh) et sa disponibilité. Ce chargeur peut alimenter…

Downloads
665
Likes
44
Rating
5
P
PrintablesMakers Workshop

1/6th P51 Mustang Cockpit

This is the cockpit I built for a CARF Models P51 Mustang including the seat, left and right panels and the rear radio stack. It was built using a combination of FDM and RESIN 3D printed parts. The Exhaust stack and instrument panel will…

Downloads
622
Likes
40
Rating
0
P
PrintablesNirvash

IP5328P power bank case

Remix or Yanev's model. I've removed the MicroUSB hole, fixed the screw holes and most importantly, I've removed the big slot to see the charge percent and replaced it with small 1.5mm holes to add a transparent acrylic rod for the LEDs.…

Downloads
603
Likes
65
Rating
5
P
PrintablesBOSSposes

MP5 -META QUEST 3

Repurposed grips on a replica MP5!

Downloads
569
Likes
152
Rating
0
P
PrintablesSunny

Lenovo P520 Drive Cage

Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…

Downloads
556
Likes
29
Rating
0
P
PrintablesAlex Chen

HK MP5

credit to Pjotrik on makerworld.com for the model. Only uploading here so more people have access to it.

Downloads
545
Likes
79
Rating
5
P
PrintablesTheKwijibo

Modded Vertical foregrip mp5k style (M-lok)

As requested, a remixed design to allow a better fit with free floating tubes AND scaled up by 110% to allow Magpul M-Lok hardware to fit. Slightly more difficult to print though, but not impossible with the right slicer settings. I ended…

Downloads
544
Likes
57
Rating
0
P
PrintablesSi1verEag1e

Airsoft MP5 mag adaptor for AK

DISCLAIMER: Airsoft part only, utterly useless in any real firearm! It started as a joke, then became a bet and in the end turned into surprisingly working project: Someone offered me an MP5 hi-cap he had no use for, and i wondered, if i…

Downloads
537
Likes
56
Rating
0
P
PrintablesAlexcooo

Samsung Wireless Charger Duo EP-P5400 Stand

Everyone who owns this wireless charger from Samsung certainly knows this problem. You finally want to sleep in the evening and put the phone on this charger without looking... And the next morning you realize with fright that the phone…

Downloads
505
Likes
68
Rating
4.67
P
PrintablesDarthDeezy

MP5 Magazine Speed Loader (Remix)

10 round speedloader for both standard metal and polymer magazines, and an original length version for polymer magazines. Also, an added “Pusher” for easier sliding of rounds. The pusher works for both long and short versions. I…

Downloads
503
Likes
31
Rating
5
P
Printablesfastbeans

RP5 Grips

Two variations of a grip I designed for the Retroid Pocket 5, featuring Nub technology. STLs for straight printing as is, but STEP files are also available if you want to make changes to better suit your needs. The Full Width grip is a…

Downloads
501
Likes
25
Rating
4.33
P
PrintablesMakers Workshop

P51 Mustang Exhaust Stacks for CARF Models P51

A set of left and right exhaust stacks for the CARF Models P51 Mustang. The shown examples were FDM 3D printed and textured by stippling acrylic paste with a stiff brush, painted and treated with a technical paint by Citadel called Typhus…

Downloads
486
Likes
19
Rating
0
P
PrintablesRMaupin

MP5 Stand

Display stand for MP5s and clones. MP5, MP5K, and no text versions. Tested with my MKE AP5-P. Needs no supports. I printed with 10% Gyroid infill and is plenty strong. Used TheCafeRacer's vise block model since it fits well within the…

Downloads
485
Likes
46
Rating
5
P
PrintablesBaumik

AAP-01 ( glock ) hpa adapter mp5

Adapter for aap-01 from Action Army. I wanted my adapter to be as easy to install as possible, and at the same time to maintain full tightness. To make the Adapter, you will need: - screw m2 - 16mm (7 pcs) - m2 nut (6 pcs) - Pneumatic…

Downloads
474
Likes
53
Rating
5
P
PrintablesStigern

Tactical MP5 Gnome

Tactical MP5 Gnome – Guardian of the Garden This ain't your average garden gnome. Fully kitted out with night vision goggles and gripping an MP5 like he's on a midnight recon mission, this tactical gnome is ready to defend your…

Downloads
455
Likes
72
Rating
4.5
P
Printablesc

MP5-SD Shroud V4 (Optional Pic Rails & Tri-Lug Support)

Video of dumping 2 back to back mags of binary with V4 EDIT (6/5/2024): V3 and V4 release. I have personally been using V4 for 2 months no issue in pa6-cf. The default clearance is made for an omega 9k which is 37mm, but the diameter of…

Downloads
434
Likes
27
Rating
0
P
PrintablesObliviousTellez

umarex MP5 handguard

wanted a free handguard so I made my own didn't like tri-picatinny rail so I did it with M-Lok so it wouldn't be too bulky. printed in two parts so it's easier to install. feel free to improve the design, I'm new to this. if you improve…

Downloads
429
Likes
37
Rating
4
P
Printablesmichalgerhat

MP5K style M-LOK grip remix

Originally I was unable to align the front stop of the original grip with the end of my handguard due to the placement of the screw holes. I've added a section with a screw hole to the back so you can have more freedom aligning it on the…

Downloads
419
Likes
97
Rating
0
P
PrintablesJoeBorracho

Snowpeak SP500 / Diana P-Five shoulder stock

Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…

Downloads
418
Likes
28
Rating
0
P
PrintablesAnthony Argento

Full Size Rust MP5 Split Model

Hey everyone this is my first "model" or first time modifying any sort of model. It is a fairly accurate full size MP5 model from the video game “Rust”. its fairly accurate as in I took the OBJ file from the game files and then converted…

Downloads
397
Likes
41
Rating
4
P
Printableschetfaker66

Kp5L Best FanDuct

it's kp5l kingroon Fanduct beter than stock no moddif creat specialy for stock printer print in 0.15 or 0.10 xwith support only for the bed

Downloads
391
Likes
35
Rating
4
P
Printableskatthulu

Lenovo P520 Optical Drives to 2x Hard Drive & 80mm Fan

Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…

Downloads
361
Likes
35
Rating
5
P
PrintablesMakers Workshop

P51 Mustang Drop Tank for RC Planes

This drop tank can be printed in three parts which are split at a scale seam line. It is 250mm long which is anout 1/8th scale (20cc sized model). It is attached and secured using 10x2mm magnets with two 1/8th aluminium guide rods. this…

Downloads
350
Likes
36
Rating
5
P
Printablesmichalgerhat

Airsoft MP5 Handguard

In response to my MP5 Flashlight Handguard model, I was asked to provide a model of the standard handguard without a flashlight slot. That's a good point, so here you go!

Downloads
331
Likes
38
Rating
5

Gibbous Outfitters Style MP5 Front Sight Mount

Notes I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs. I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone). Hardware If you…

Downloads
328
Likes
27
Rating
0
P
PrintablesSaniainen

MP5k M-lok Airsoft Handguard

More general version of my previous design. This SHOULD work with all kinds of airsoft MP5k's, but so far I have tested it only on my JG. Meant to be used with "JG Works Scope Mount For Airsoft Mp5" to make somewhat continuous rail. Try…

Downloads
318
Likes
71
Rating
5
P
PrintablesL21Degrees

Under desk/shelf bracket mount for Lenovo ThinkPad P52 laptop

*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…

Downloads
312
Likes
56
Rating
4.67
P
Printablesmichal00ss

IP5328P Power Bank module case (5x 18650 cell)

IP5328P module case This is a remix of 3D printed case for very popular IP5328P power bank module. This module supports 18W of charge/discharge and is capable of delivering 12V at the output. I made a remix to be compatible with the M3…

Downloads
308
Likes
49
Rating
5
P
PrintablesMortalWombat

Kingroon KP5L Adjustable Fan Duct with BLTouch Mount

A remix of yhristov's remix of my KP3L fan duct to work with the KP5L. The duct is adjustable vertically to work with stock V6s or volcano-style hotends. There are also horizontal adjustments to account for different hotend positioning…

Downloads
307
Likes
25
Rating
0
P
PrintablesRan Bao

Arken EP5 Throw Lever

The CAD can be found from https://github.com/eamars/PrintableThrowLevers/tree/main

Downloads
299
Likes
12
Rating
4
P
PrintablesTheCafeRacer

MP5 MAG STAND

EDIT (12/5/23): Updated fit based on feedback. Hold 6 x of your MP5 magazines in one place. There are a couple small storage trays built in which also prevent the unit from tipping over. Has been tested to work with MKE, Zenith, and HK…

Downloads
294
Likes
36
Rating
5
P
PrintablesRex

Mp5 Speed Loader

Designed this Mp5 speed loader with aspects I've seen from a few other commercially available ones. Prints with no support material and in about 3 hours. The rails that interface with the cases are removable and replaceable in case they…

Downloads
277
Likes
46
Rating
4
P
PrintablesSaniainen

MP5K Long M-lok Conversion (AIRSOFT)

[EDIT] There was an error in 229 version, make sure you use fixed version! Conversion for airsoft MP5k. It will make mp5k longer, 229 version is roughly regular MP5 length. Modelled to be used with JG MP5k, but should be usable with other…

Downloads
264
Likes
60
Rating
0

KAC MP5 RAS Style Optic Mount

As they don't seem to make even airsoft versions of these anymore so I designed my own. I don't have one so I was just modelling it using of off-axis photos from google so its not going to be exactly the same as the original, and now…

Downloads
261
Likes
30
Rating
5
P
PrintablesHPSwiss
18+

The source marked this model as adult content.

Downloads
260
Likes
80
Rating
5
P
Printablesmyxxx323

Powerbank на 4шт 18650, с использованием модуля IP5310

Под печать соплом 0.4мм, слой 0.2мм. Можно любым в принципе, но отсеки для светодиодов могут не пропечататься при использовании более крупного сопла (подбирать ширину лини придется). Печатал из АБС, сопло 0.4мм, слой 0.2мм, клеил…

Downloads
259
Likes
54
Rating
5
P
PrintablesThibaud

LG 24MP58VQ VESA adapter

Keeping on with my trend of designing functional parts for extremely niche use cases, I present you with a custom adapter to turn the original stand mount on a LG 24MP58VQ 24" monitor into 100x100 VESA. A 4mm and 7.5mm drill are…

Downloads
256
Likes
11
Rating
0
P
PrintablesTidal

BB Funnels for Airsoft. M4 / AK / MP5 / AUG / G36 (Collection)

Here is a collection of BB funnels i have made over the years. I previously sold theses as printed products however im stopping that. So here they are free for everyone now. This collection includes M4 & M16 AK 47 G36 AUG MP6 40MM Moscart…

Downloads
254
Likes
42
Rating
4.75
P
PrintablesTheCafeRacer

MP5 Vise Block

Vise block for MP5s. Has been tested to work with HK SP5, MKE AP5-P and a Zenith ZF5-P. There is an overhang that prints where the mag catch is. If you are having issues with the mag seating; you can clean up the edge with an Xacto. I…

Downloads
253
Likes
21
Rating
0
P
PrintablesL21Degrees

Lenovo ThinkPad P15 and P52 laptops under desk/shelf bracket mount. Optimized for 3D printing.

*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…

Downloads
253
Likes
30
Rating
0
P
PrintablesRod MacPherson

Aruba AP500 Mount

Drywall/ceiling mount for Aruba AP500 series WiFi Access Points Aruba's AP500 series do not come with any mounting hardware, this simple mount allows you to screw-mount this style of AP to a wall or ceiling or other solid surface. This…

Downloads
252
Likes
13
Rating
5
P
PrintablesCsaba Baráth

LEDLENSER P5R CORE TORCH CHARGING STATION

LEDLENSER P5R Core torch holder with charger socket. I recommend sponge glue to fix the charger

Downloads
250
Likes
30
Rating
0
P
Printablesdpi

Thinkpad P51 vertical stand

I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…

Downloads
245
Likes
27
Rating
5
P
Printablestn00364361

CWWK X86-P5 Devboard Case

Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…

Downloads
238
Likes
14
Rating
5
P
PrintablesKühli

T4E HDP50 Speedloader Magazinerweiterung 12 Rounds

Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.

Downloads
237
Likes
18
Rating
0
P
PrintablesLeafyon

MP5k Front Sight for Galaxy/Tokyo Marui/CYMA

Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…

Downloads
234
Likes
16
Rating
0
P
PrintablesAlexandervv12

MP5

MP 5 gun model

Downloads
228
Likes
14
Rating
0
P
Printables3D Tiskovec

MP5 keychain

MP5 keychain made in Fusion 360.

Downloads
228
Likes
37
Rating
5
P
PrintablesTH1813254617

MP5 AEG Curved Mid Cap Mag for Mosquito & Cyma (BETA WIP)

Update 2025-10-14: Removed the remix link to glgr's Curved MP5 magazine . My mag has grown different in every way and is no longer based on his mag design. A remix link no longer made sense. Fitment is based on Cyma's metal-shell AEG…

Downloads
224
Likes
44
Rating
5
P
PrintablesAinon3Dtisk

Airsoft Grenade Launcher for Mp5 and others

Hello, I have an Airsoft Grenade Launcher for Mp5 and others for you. The grenade launcher is specially designed for Mp5 to look like from Half Life 1 or Black Messa . The grenade launcher is fully functional for Airsoft grenades. It is…

Downloads
221
Likes
60
Rating
0
P
PrintablesJenky

MP5 magazine holder

Držák na 6 kusu zásobníku pro MP5. Pro Mid-cap i Hi-cap magazine. 6 piece magazine holder for MP5. For Mid-cap and Hi-cap magazines.

Downloads
221
Likes
28
Rating
0
P
Printablesminidrifter

Enhanced selector cam for JG mp5 series

This is an enhanced version of the airsoft mp5 selector cam, compatible with both V2 (A, SD and Navy variants) and V3 gearbox versions (K variants) of the mp5. Being a gunsmith for my team, I have come across the need for this part…

Downloads
216
Likes
4
Rating
0
P
PrintablesPejek

HDD SSD Hard Drive Caddy Bracket for Lenovo Thinkpad T470 T480 T570 P50 P51 P70 P71 P72 E460 E580 E15 R14 E14 T14 S3 Caddy Holder

2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470), For Thinkpad E480 E485 R480,…

Downloads
213
Likes
20
Rating
0
P
PrintablesDaniel Berger

Suspended P51 Mustang

I made a P51 as a suspended print, just for fun. The model is made to print with 0,2mm layer hight. Other layer hight may not work. Printed on Prusa Core one, 0,2mm layer hight, PLA, without support and without raft. The printbed has to…

Downloads
211
Likes
30
Rating
5
P
PrintablesPineapple Dan

Hinge for Toyota Hilux tray (PZQ84AP545) Australia Ute 2011-

I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…

Downloads
209
Likes
11
Rating
0
P
PrintablesKoosh

MP5 Magazine Block/ Limiter

This allows factory MP5 or PTR Magazines to be used in states with a magazine capacity limit.

Downloads
205
Likes
7
Rating
0
P
PrintablesBONK BOY

Heckler&Koch MP5 gun for Dummy 13 (BETA)

WAIT! Before printing, just know that there is now a new updated version available https://www.printables.com/model/1179980-mp5-and-mp5k-for-dummy-13-beta-v1extra-stock-skele A beta release of a little something that I am working on :)…

Downloads
199
Likes
52
Rating
0
P
Printablesrodsgear

Frontier SP500 Scanner 135 mask half and full frame

I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…

Downloads
197
Likes
5
Rating
0

WE Apache MP5 Odin Speedloader Adaptor

Hardware Two small pins, I used a sewing needle cut down. Two small springs, about 4mm diameter. (One for the mag catch and one for the BB stopper) One BB Printing Print on the edge as shown in the photos. No support needed Assembly Put…

Downloads
193
Likes
23
Rating
0
P
Printablestippfehlr

Kingroon KP5L Filament Spool Holder

tho original model was just a bit to tight for me. It just fit on with a hammer and destroyed my sticker, so I scaled it to 101% so you don’t have to. Top part of printer needs to be dismantled: unscrew the 4 screws on top and one of the…

Downloads
193
Likes
7
Rating
0
P
PrintablesBeppis_Tactical

SSP5 Quick Holster

Quick holster for the Novritsch SSP5 No retention mechanism, meant only for storing the pistol between games when used as a primary or with a m4 adapter like I am. Of course Novritsch sells these in metal which will hold up better but for…

Downloads
191
Likes
15
Rating
0
P
PrintablesNathani

NP5SD Gryphon Remix

A couple of years ago I bought an np5 gryphon secondhand, and wanted to design something to make mine a little different from the other ones out there. 2 years later and I finally got around to doing it! The NP5SD replaces several parts…

Downloads
184
Likes
42
Rating
4.5
P
PrintablesTaras

Samsung Wireless Duo EP-P5400 Charger Stand

Print settings: Printer: Creality Ender-3 V3 Slicer: Cura 5.8.1 Filament: PrimaValue PLA+ White Resolution: Standard Quality - 0.2mm Strength: Infill Density: 10% Infill Pattern: Cubic Shell thickness: 1mm; 1mm Support: Normal Additional…

Downloads
182
Likes
27
Rating
3
P
PrintablesTrollmaster_LP

G&G Arp9 Arp556 Stock Tube Extension

Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print instructions Category: Sport & Outdoors Summary Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print Settings Printer Brand: Anycubic Printer:…

Downloads
181
Likes
13
Rating
5
P
Printablesdemetrius

Gasmask GOST GP5 thread

I need to create a custom attachment for a gas mask and had to model a thread to fit my need. (since i could't repurpose the ones i've found here) The thread turned out quite nice, so i decided to share it. Since its just a thread with…

Downloads
176
Likes
14
Rating
0
P
PrintablesMUTZ

IP5306 5V 2A module

A simplified model of a IP5306 5V 2A powerbank module for use in your projects

Downloads
173
Likes
3
Rating
0
P
PrintablesAnton Skorochod

Kingroon KP5L simple 3DTouch/BLtouch mount

original stl provided with kingroon doesn't fits my printer :( it's just too high and nozzle hits the bed :( so I've modeled simplest possible mount link to onShape project to edit:…

Downloads
173
Likes
10
Rating
0
P
PrintablesJEO

Ryobi P552 Saw Clamp

This will take a little bit of mechanical work to complete. All parts printed without supports. Parts and tools I used. 3/8-16 ready thread rod about 6 to 6 ½ inches 5/16 flat washer 6-32 x 3/8" screw #6 flat washer super glue 6-32 tap…

Downloads
173
Likes
66
Rating
5
P
PrintablesvmLOGIC

Eiffel Tower - 50 cm - P5/7

This is part 7/7 of the modular Eiffel Tower. The 50 cm Eiffel Tower consists of 7 individual parts. These parts were originally released separately over several months as a free preview of the complete project. This free release now…

Downloads
170
Likes
23
Rating
0
P
PrintablesBob Loblaw

Tesla Wireless Phone Charger Qi Samsung Z Flip3 Flip4 Flip5 Flip6 Adapter

This is a Samsung Z Flip6 (and previous flips such as the Flip5, Flip4, and Flip3) adapter for the Qi wireless charging pad in 2020-2023 Tesla Model 3 & Y. It should fit into the car semi-tightly and not move around when you insert/remove…

Downloads
169
Likes
7
Rating
3
P
PrintablesgalaxyCr8r

Gryphon MP5K Add-ons

Ever wanted a MP5K but want it to sling foam? Now you can! Included is a top MP5-esqe compartment that fits a very very slim battery that you'll probably have to build yourself and an included stock cap. An optional closed compartment…

Downloads
168
Likes
66
Rating
4.5
P
PrintablesSaniainen

MP5k m4 stock adapter V2

New version of m4 stock adapter for mp5k. This is at least compatible with JG MP5k. If you have problems with fitting, you can contact me and propose changes. CleanAndThin is MP5k part only. [edit 22.4.2020] made M4deansV2, it has bigger…

Downloads
166
Likes
16
Rating
0
P
Printablesthedoginthewok

Mellow Fly DP5 DIN Rail Mount

Voron style Mount for the Mellow Fly DP5 MCU Needs original voron DIN Clip and M2x10 Self Tapping Screws

Downloads
163
Likes
19
Rating
5
P
PrintablesDaniel S

Samsung Wireless Charger EP-P5400 (for S23 Ultra)

Two-Piece assembly for Quick Wireless Charger EP-P5400. Print and slide together, finished! Alignment Feature for S23 Ultra with Samsung Leather Case, smaller Phones should work too -Cutouts on bottom for 4x 3M Bumpon SJ 5076 -Supports…

Downloads
162
Likes
44
Rating
5
P
PrintablesDarthbarney

Ryobi Lithium Screwdriver 4v HP54L Skadis Mount

Mount your Ryobi Lithium Screwdriver 4v HP54L (and HP34LVN) on a Skadis pegboard, combined two models I found so it works with Skadis: Universal Skadis Mount https://www.printables.com/model/282336-skadis-universal-mount-big 4V Li-Ion…

Downloads
161
Likes
19
Rating
4.5
P
PrintableseXthemaX

Powerbank Case for IP5306 USB-C Module for 1S 18650 lithium battery

I needed a power bank case for my salvaged 18650 batteries. The module I used is in the link below. 5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,…

Downloads
159
Likes
29
Rating
0
P
PrintablesArdjan

Cable cover for Thermaltake Core P5 computer case

I recently built a new PC in a Thermaltake Core P5 case. As you can see in the pics on the website and my ‘before’ photo, you can see the power cabling easily. I have the case mounted to the wall behind and above my monitor, so this…

Downloads
159
Likes
19
Rating
5
P
PrintablesKevinU_PA

IP5328P Powerbank Case with Loop for 60x105 battery

Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made. Remix it on Onshape:…

Downloads
157
Likes
17
Rating
4
P
PrintablesUntangleWORKS

FGC-9 MP5K barrel retainer mod

a small mod to the barrel retainer. to protect your hands from slipping of. Update_ ** ____ ** 11-5-2020 in file errors should be fixed. Category: Sport & Outdoors

Downloads
153
Likes
6
Rating
0
P
PrintablesVanGoghComplex

Thermaltake P5 - 480mm Rad Brackets

This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the…

Downloads
150
Likes
10
Rating
5
P
Printablesgbirk

MP5 Magazine storage with magnetic base

This is a remix so that real 9mm MP5 or clone magazines will fit. Holds 10 real or clone correct 9mm MP5/SP5 magazines. There are cutouts in the bottom for Qty:6 20mm x 3mm magnets, but I realized it only really needed 4 magnets to stick…

Downloads
150
Likes
7
Rating
5
P
Printablesrupirix67

mp5-sd for DUMMY 13

its mp5-sd for DUMMY 13 print with support

Downloads
149
Likes
37
Rating
0