5,813 models
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
*Update: added STEP files & link to assembly jig . *Update: added STL files without text. I Saw Makers Cabinet's IRIS and had to have it, but the I found how much it costs and decided to design a 3d printable version. Maybe someday I'll…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Overview Toothpaste squeezer to help get that last bit of toothpaste out of the tube. I've personally printed a couple for around the house. I've even had one get warped after going through the clothes dryer but it still gets the job…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
A 3D Printed Toothbrush and Toothpaste Holder. This holder offers a stylish and convenient solution to store and display your oral care essentials in an elegant manner. Designed with both functionality and aesthetics in mind, this holder…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Toothpaste squeezer for your almost empty toothpaste tubes. Slide your tube in the slot and turn the knob. Print as is without supports.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Do you hate wasting toothpaste? I wanted something to help extract all the toothpaste from the tube and still look nice
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant
I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
Another simple but elegant toothpaste squeezer ;-) Print Instructions Parts are oriented in the correct position Filament PETG (PLA maybe not) Nozzle diameter : 0.40 mm Default 0.20mm QUALITY PrusaSlicer Print Settings Perimeters : 3 No…
Print approx. €2.34–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
vytlačte ze zubní pasty vše
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
A funny toothpaste squeezer in mouth form that makes sure you get all the toothpaste out of the tube without wasting any. Print instructions Easy to print. I decided to print it in PLA with infill 50%.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
hlava na zubní pastu
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
You want to get the last bit out of your toothpaste tube without any effort. With this model, that's no problem anymore. Happy printing! Recommended print settings: Nozzle: 0.4 Layers: 0.2 No support Adjust the size of the model to fit…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
This s a toothpaste squeezer remake from https://www.printables.com/model/26897-toothpaste-squeezer. A pair of strips was added to the original design to increase the squeezing ability of the model. A sample GOCDE file is attached for…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
H0 1:87 Passenger Bridge for Trainstation Platform, Eisenbahnstation Bahnsteig. You need the base train station platform . You can connect two platform elements with the connector and build a longer platform. You get four versions created…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant
Add a touch of Star Wars charm to your bathroom with our adorable Grogu toothpaste squeezer! This cute and functional accessory is shaped like everyone's favorite little green Jedi, making your daily dental routine a delightful…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Remixed and improved Phone stand for VW Passat B6 Bluetooth by: Adrian-Claudiu Bîcleșanu Changes of this remix Sacrificial layer for better print of holes for screws on the base bracket Redesigned left/right and down bracket Bigger holes…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET
The egg is 105 mm high and is completely pass-through. As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Español: Este diseño está pensado para poder facilitar la organización de las pastillas que una persona se debe tomar a lo largo del día en las diferentes tomas que debe hacer. Se puede personalizar tanto en tamaño como en el número de…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Full Text: Rocket 2.0 Passthrough: Creativity in Full Thrust Introducing the new Rocket 2.0 Passthrough model, combining simplicity, functionality, and innovative passthrough design. This rocket opens up endless possibilities for vibrant…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
No supports required (if you print as I present it to you and your printed is well calibrated)
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Howling wolf head lowpoly woggle - Pasa pañuelo de lobo aullando para scouts cubscouts o lobatos
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Holder for toothpaste/toothbrush or whatever you want to store in the bathroom to keep things organised. With some holes to save on filament but sturdy enough. The bottom has drain holes to prevent water from accumulating. Print…
Print approx. €6.37–€7.78 excl. taxPreliminary estimate for one variant
Optimized my original design https://www.printables.com/cs/model/310477-toothpaste-roller so that both models can print without supports.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Remix of @TinkrMakr model to be a little bit more hand charming. I beveled the edges to make it feel better.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A simple and effective tool for squeezing toothpaste tubes so that nothing is left inside. Just slide it onto the end of the tube and push the contents forward evenly and cleanly. It also works perfectly with other soft tubes such as…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
The Vegvisir, also known as the runic compass or the Viking compass/Nordic compass made of eight Viking rune staves, is a symbol of protection and guidance believed to be used as a compass by Vikings. The word vegvisir means ‘wayfinder’…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
I always thought that the Brio lifting bridge is built for letting trains go beneath it, once it is lifted. That was also one major reason I bought a 3D printer, actually. It's compatible with the "old" lifting bridge I played with when I…
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple remix of model created by TinkrMakr I used Blender to add bevels around all the outer edges of the Squeezer.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
For best results, print each piece in a different color. Higher infill will create heavier parts that will passthrough each other better. Works fine at 5% as well. No Support Needed!
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers
Print approx. €9.13–€11.16 excl. taxPreliminary estimate for one variant
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Print approx. €10.03–€12.26 excl. taxPreliminary estimate for one variant
This is my version of a Compass artifact seen in S.T.A.L.K.E.R. series. It consists of several parts that can be easily assembled and mounted with LED lights. Personally, I find this artifact to be much nicer with transparent tubes rather…
Print approx. €7.42–€9.07 excl. taxPreliminary estimate for PETGSource material: PET
I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…
Print approx. €6.03–€7.38 excl. taxPreliminary estimate for PETGSource material: PET
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for PETGSource material: PET
Из-за снега и льда потерялась шапка домкрата. Решил оперативно сделать модель, чтобы поставить ее на место.
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
Print approx. €5.89–€7.20 excl. taxPreliminary estimate for one variant
Private Property No Trespassing Plate This 3D printable model is a warning sign with three dimensional human bones, skull and English text. It is intended for installation on a door, cabinet or any board or object. You can put it on your…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
There are a lot of filament pass through solutions here on Printables, but I didn't like how they stick out of the enclosure, so I designed these two fairly flush versions. One is for the mid cover part and the other for the edge of the…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Bodhisattva of Compassion
Print approx. €15.55–€19.00 excl. taxPreliminary estimate for one variant
I broke this piece of the warning triangle compartment in the rear door of my Passat 3C (year 2009) by closing it too hard. I have designed this just like the original and after 3 years I have not broken it again. It's true that I've not…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A coin with a compass rose engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Se imprimen tres partes por separado: base, asa o manija y tapa. Luego de imprimirlas se debe pegar el asa o manija con la tapa. NO requiere soportes. Fácil para limpieza después de su uso.
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
Print approx. €31.35–€38.32 excl. taxPreliminary estimate for one variant
Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Lithophane of amazing scene of Gandalf fighting Balrog in Moria. Printed with Prusament PLA. See the print file for more details. Lithophane is best to print “standing” and it must be 100% filled so the picture is visible. I would very…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
GRAVITRAX ; always short of height stones? Not anymore, just print your own! GRAVITRAX height stone (column) H=145mm with pass through (v.20211110.r04) This one is 145 mm height; compatible with 2pc Gravitrax, Pro Vertical (2*70mm) and 5…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
Klíč na vytlačování obsahu hmot v tubových obalech do šíře 59mm.
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Entretoise pour fraiser un rond parfait avec la défonceuse Festool OF1010. Cette pièce peut s'utiliser avec toute défonceuse utilisant des barres de 8 mm avec un entraxe de 108 mm. L'entretoise utilise les barres de 8 mm et les vis de 6…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
Motivation I recently purchased a P2 Laser Cutter and Riser. One of the first cuts I needed to make was on a long piece of ¼” acrylic to be used as a window insert to which I would attach the exhaust duct from my inline fan. I currently…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
This is an updated version of the trammel based on suggestions I received from Bassposauist . It adds a scale and is a little more compact. Another suggestion was to use the knob designed by ItsAzuurfor_ for a M4 hex head bolt…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Compass for riichi mahjong. Slot is for standard scoring sticks (65 x 7 x 4 mm). Tiles on the picture are AMOS 28 mm (28 x 21 x 16.5 mm). You can make compass bigger or smaller depending on tiles you are using. Compass size is 130 x 130 x…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
No support is required for printing. 0.2 mm layer with 0.4 nozzle. This Owl Woggle Scarf Ring is intended for Brownie Guides leaders affiliated with the WAGGGS association. In Argentina, Brownie leaders are referred to as "Owls," and they…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Replacement for the default Lack enclosure top inserts for feeding filament into a Lack enclosure. No glue. Top should take a 4mm PTFE tube; bottom feeds 1.75 mm filament. Print instructions Print bolt shaft upright with a 0.4mm nozzle…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
This beam compass (trammel) is used to scribe a circle or arc, by using a sharpened point at one end and a lead pencil at the other. The radius can be adjusted by sliding the pencil holder across the tool’s beam, and locking it in place…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Adapter to put in between the Yoda head and your candida toothpaste tube. If you use the STL file, make sure to set/increase the X and Y axis to 17.5mm (keep the Z at 13mm). If you print it, and it works for you, please rate it and post a…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…
Print approx. €7.35–€8.98 excl. taxPreliminary estimate for one variant
I love the original design, but wanted to be able to see the screen status LEDs better so I added a section to print with a translucent filament. The main body is tool 1 which is the primary color, tool 2 is the section for the…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
Wallet Nozzle, es sencilla, Pequeña, puedes tener de varios tamaños de nozzle, fácil de imprimir con cualquier material. Para colocar el gatillo, empujado hasta el orifico, puedes ayudarte con una llave L. La tapa de identificación entra…
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
orientační čas tisku cca 4 hodiny tisk jednoho kelímku při 100% rozměrech (69x69x95mm), výplň 20% a 0,20 mm výšce vrstvy (speed) zabere 4 hodiny 3 minuty.
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
Organize your optometry clinic with these sets of bottle holders! These bottle holder holds are made completely from PLA and match various numbers of bottles and also bottles sizes! The regular 4x2 and 4x1 holds all TPA drops such as…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Some skill is needed to use it, but it's definitely possible. All parts were printed with PLA at 0,2mm layer height and 3 perimeters. No supports needed. Designed to be tight fit so it won't wobble. There are optional lenghts of joints…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Spent a bunch of time, threw out a few designs as false starts and finally ended up with a model that works! These are 5mL eyedroppers printed in PETG with graduation marks every 1mL. I actually think they look kinda cool, which is not…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Toothpaste holder optimized for Elmex and other 35 mm toothpastes. Adhered with double-sided adhesive tape
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
For my Ikea drybox mount I needed a filament pass through for PC4-M10 fittings which don't stick out of the drybox. So I made this model for the 10,6L size Ikea 365+ container for two filament spools. Printed in PLA with 0,2mm quality…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
A toothpaste squeezer that works great. I designed it to work with Colgate but it will work with others. Buy me a coffee! https://www.buymeacoffee.com/MK4EXPERT
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This is a Cutter - Engraver i made for a Pastry Chef i made a few years ago. She wanted to decorate a birthday cake with 3D Baby Shoes made out of Sugar Paste (Fondant). There are 6 pieces that cuts sugar paste and combining all pieces…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy to print storage stand for the KitchenAid Gourmet Pasta Press pasta discs and cleaning tool. (Model KSMPEXTA) I designed two versions, for 5 or 6 discs (if you decide to store one with the pasta press). Printing…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Two sliders can be attached to any length 5/8" to ¾" thick wood beam to allow drawing or cutting a circle. If you prefer not to use a wood scrap, you can print the beam consisting of multiple beam extensions that press fit together. The…
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
Se hizo una regla donde el diseño permite tener un compas y un transportador en la misma herramienta, de un lado estará el transportador y del otro la regla, mientras que el compas es con la ayuda de los hoyos que están en el centro. El…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Diseñe el modelo con el objetivo de poder tener dos portalápices fácil de juntar para ahorrar espacio, pero que tuviera un diseño lindo y llamativo, me inspire en los juguetes de giro con paso imposible para llegar al modelo, al cual a…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Here's a 3D printed version of the Universal Orlando Annual Passholder (UOAP) logo! This model features places for 10x2mm magnets ( https://amzn.to/49YAl1K ) that can be glued into place. Print Recommendations Material - PLA Layer Height…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Om kabels netjes door een kast of bureau te laten geleiden. Er zijn verschillende maten op het gat terug bij te vullen. Ook zijn er verschillende klokboorgaten. 51mm-5mm-64mm en 76mm. For neatly guiding cables through a cabinet or desk.…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
