5,333 models
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
With thse Spell Slot Trackers you have the number of open spell slots for your caster always in sight. One d6 dice per spell slot level is used to keep track of the number of open slots. This version "Half Caster" has dice slots for spell…
Hello there, I created a Paracord Jig Upgraded to everyone, who needs a jig for making paracord bracelets, etc. :-) I printed a great model of "old" Paracord Jig by FrankBer from Thingiverse and I using it for one year. I had two small…
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? This 3D printable handwheel upgrade is here to revolutionize your sewing experience! Problem: The original handwheel on the Singer…
After getting a Tamiya Clod Buster for my birthday, I wanted to make something more unique as it looked a bit toyish, so started coming up with ideas of things I could design and print. I've learned loads while designing these, and really…
With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…
Custom DND Dice Set A complete set dice designed for DND and RPGs. This set includes all standard dice: D4, D6, D8, D10, D12 and D20. The models are optimized for 3D printing and are perfect for painting, allowing you to create your own…
From the depths of Russia. No-frills gun. The very definition of frugal power, recommended by ten out of ten Mujaheddins. Delivering explosives for hundreds of meters with 'just enough' accuracy for more than 50 years. And now it can be…
Custom-made upgrades for the components for the board game Anno 1800. I sprayed them with some metallic-like coatings to get a nicer sheen on them. For the gold ones tokens I included both an embossed and a debossed version, but I…
Stock, the oculus quest does not fit me very well. If I pull the band low enough to keep it from slipping off, there is a huge gap at the bottom of the headset. This allows me to have a very good fit with no gaps and keeps the headset…
UPGRADE!! Spool Holder Series : Anycubic (Chiron / Kossel / Mega-X) Easy install just clip on for more smooth rolling filament spool Enjoy!
This is a remake of the Universal Rewinder by https://www.thingiverse.com/VincentGroenhuis, https://www.thingiverse.com/thing:3338467 which was taken a step further by Blargedy https://www.thingiverse.com/thing:3867357 which gave me the…
Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…
Hexagonal magnetic terrain tiles for tabetop rpg. You need also magnetic balls 5mm, 6 for one pice. You should stop print in 6mm layer hight, so you can insert magneses in each wall. In my uploaded g-codes i have made pause in right place…
LPG Filler Cap for a hatch with a hole diameter of 44 mm. I can make a model for any size. Write in the comments. Thread M10 x 1.5. After printing, you can walk the die along the thread.
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
Remix from Martin_au https://www.prusaprinters.org/prints/1683/files A cable clip for the LCD cables for the Bear Mod upgrade. The Bear Mod sturdy frame upgrade for Prusa MK3S is a 2040 aluminum extrusion, so different sized LCD cable…
PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…
Direct replacement for original part. Makes it a lot easier to rewire a single wire without disconnecting all wires from the controller board. The older version for MK2/MK2.5 makes access to the X Belt without removing the back plate.…
This is a remix of Landru's “Companion Cube Upgrade”, altered so that you can print it in its proper colors on any printer by just switching filaments. It's also scaled-up considerably - this version is 8 cm on a side. The sides and…
I had to upgrade mount created by Chad Baker - What I did was to create new PG7 screw socket (looks like original had broken thread) also make it bit lower so it is not interfere with cable chain on the back when head is moving on very…
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Sometimes the filament gets stuck when unloading - it can be difficult to get the stuck part out as you have to dismount the filament sensor cover. I made the cover two part, a fixed part and a screw in part, holding the PTFE guide tube.…
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
This is based on Lichtjaeger's awesome design. I wanted to make it a bit lighter and also use the Nut that comes with the revo to fasten it instead of the Prusa method. (Which I am not a big fan of) Insert the plastic Nut that comes with…
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
PG7 threaded blind stuffing to close unused PG7-openings in housings. [1] Thread type: PG thread [2] Diameters for PG7 opening: a) threaded hole: 11.3mm / PG thread b) drill hole without thread: 12.5mm [3] Sealing: An optional TPU-sealing…
My cat toilet roll holder https://www.printables.com/model/1306353-toilet-paper-roll-cat-friendly-animal-klopapierrol I wanted to put my cat toilet roll holder next to Gromit. As the cat has a tail, I also added a tail for Gromit. The…
PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…
PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2.5 meters of filament, so it can be a great addition to your…
UPGRADED in strength and wall holding power. Original design was too flimsy. Printed in PLA but PETG fine, 0.6 nozzle, 0.3 layer height, no supports needed. Assumes M4 Inserts but M3 Inserts will work also.
With a pair of velcro strips at the bottom and an optional strap, StopGrip 's mission is to prevent boxes, buckets and groceries from sloshing around the boot of your car. BOM Velcro strip 2 × 20mm × 100mm Gorilla glue or similar to…
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
Simple mount for attaching the HyperX QuadCast to a Asus PG420UQ monitor.
PG42 threaded blind stuffing to close unused PG42-openings in housings. [1] Thread type: PG thread [2] Diameters for PG42 opening: a) threaded hole: 52.5mm / PG thread b) drill hole without thread: 54.0mm [3] Sealing: An optional…
PG36 threaded blind stuffing to close unused PG36-openings in housings. [1] Thread type: PG thread [2] Diameters for PG36 opening: a) threaded hole: 45.5mm / PG thread b) drill hole without thread: 47.0mm [3] Sealing: An optional…
PG48 threaded blind stuffing to close unused PG48-openings in housings. [1] Thread type: PG thread [2] Diameters for PG48 opening: a) threaded hole: 57.8mm / PG thread b) drill hole without thread: 59.3mm [3] Sealing: An optional…
These are large creature sized tokens (2") for tabletop RPGs. They feature a skull and crossbones of the bottom for when they are inevitably slain by your party of heros. I recommend printing in three colors, one for the death icon, one…
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
Just a very simple tray to hold the FPGA dev boards from Alchitry . Fits the CU and AU boards. The board can be secured with four M2x5 screws. ! Warning this is for the V1 boards and has not been tested with the V2 boards V2: better…
I bought a beat up broken Squier Bullet Telecaster off ebay and made a new body for it. Obvious inspiration from the Gibson SG. you can mod the STL to fit a BexGears Tele Kit. the two extra middle bridge holes are the correct width for…
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
A parametric RPG dice holder for 1d4, 1d6, 1d8, 2d10, 1d12 & 1d20, decorated with a stylish Japanese kumiko pattern. I designed this around the exact measurements of my Rime of the Frostmaiden dice set so the fit may not be ideal for your…
Pieterv24's MOTU M-Series Under Desk Mount but with a second slot for a Shure PGXD4 Wireless Microphone Receiver system. It should fit fine with the model that we purchased this year, no guarantees if Shure makes a revision to the body at…
This was a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. Then an epic battle was fought in the room it was in and the table became collateral damage. It measures 1 inch by 2 inches and is to scale for…
These files will provide you the ability to print your own replacement parts and also add upgrades to TT/FFC too. These files work well with PETG. The complete Cabinet is available at…
Additional parts: Threaded inserts (M3x4mm) and 20mm spacer between Orbiter Extruder / Toolboard mount required. CAN-FD on Duet3D boards rulez ;) Printable in ABS. Use at your own risk. Please give me some feedback and post your make as a…
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
PG21 threaded blind stuffing to close unused PG21-openings in housings. Adapter for 1xPG7 cable gland for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffing with PG7-thread. [1] Thread types: PG thread…
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-3)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
The Condition/Status Tracking System I made for my Lancer RPG game. These are a sister model made to go with my Lancer RPG Hex Bases: https://www.printables.com/model/823507-lancer-rpg-hex-bases-33mm I also strongly recommend the…
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000425 : Planetary gear, 23 teeth, 0,85 modulus
I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…
Sky Team upgrade package including box insets (upgrade bed adhesion) and upgraded switches. Based on: https://www.printables.com/model/805423-sky-team-insert-removable-tray https://www.thingiverse.com/thing:6268933
PG36 threaded blind stuffing to close unused PG36-openings in housings. Adapter for (1-4)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
My first shared project - We have Shure BLX wireless PG58 mics, and they can be challenging to keep sorted during a performance when someone puts them down. They have a cap under the battery cover that can be replaced with different…
My filament rolls keep falling off my filament holder so I made an upgrade to fix it. Print with supports on. You stick it through the center of the fillament holder and put the knob on the side that connects to your printer for those to…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-6)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
This door handle is an upgrade to the base handle for the delack enclosure. I wanted something larger that I could easily grab when opening/closing. This fits the same bold hole and fits the M5 nuts that come with the enclosure. I suggest…
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
Prusa MK4 pg cover with honeycomb, made from two separate parts glued together
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…
The goal of this upgarde is to get the full print bed available, completely prevent collision and improve the thermal performance in the most foot print efficient way, to compeat with the materials capability of the Core One. I get easily…
I made this cover for the a meanwe ll power supply im useing it covers the ac side
Upgraded nut for angle grinder disc saver
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000426 : Planetary holder
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000430 : Planetary shaft (use 2)
Room Fan for your Gaming Setup or other rooms where you need some cooling in the summer. The tilt angle can easily be adjusted. What you need: min 3x - 70x70mm Fan (you can add more fans if you want) power supply or battery
![Kumiko RPG Dice Holder [Parametric]](https://media.printables.com/media/prints/82eb7505-58de-4e60-b337-2c383a0f003f/images/10872560_c1d5f70e-d21f-493c-abb2-33b7298bc920_60912808-6c92-4b47-b8f3-853fea033c37/basic-kdh-edited-render.png)
