Minature Chair tabletopgaming
a basic wooden chair designed for tabletop minatures 30-40mm high
- Downloads
- 268
- Likes
- 73
- Rating
- 0
133 models
a basic wooden chair designed for tabletop minatures 30-40mm high
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Just a very simple tray to hold the FPGA dev boards from Alchitry . Fits the CU and AU boards. The board can be secured with four M2x5 screws. ! Warning this is for the V1 boards and has not been tested with the V2 boards V2: better…
I recently designed a case for the MiSTer FPGA console and thought I would share it with you. It supports the standard USB HUB and either Digital IO board or Analog IO board. There are different top pieces for the IO boards. It has 3…
Features: 2 Front mount USB ports Front mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) Internal SATA HD easily accessible from the rear HDMI port Ethernet 3 more USB in the rear Serial…
I designed this case to provide both protection for the Basys 3 board and to eliminate handling the lead solder joints. All of the I/O is easily accessible. The base has four 3.5mm tall standoffs to allow room for the solder joints & pins…
Features: 3 Front mount USB ports (1 internal for wifi or BT dongle) Left side mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) HDMI port Serial User port (for SNAC and MT32-Pi) 5v DC…
MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. Supports 7 and 9.5mm…
This simple top and bottom plate for MiSTer FPGA helps protect sensitive electronics. The top plate has 14mm standoffs built into it to clear all 40mm x 10mm fans. The bottom plate has 4mm standoffs built into it to clear the bottom of…
This is my take on a Zaparoo/TapTo NFC card reader for the MiSTer FPGA console. It's designed to mount to the bottom of a MiSTer stack and supports most case setups. Just use 4 M3 x 16mm or so screws to mount it to the bottom of your…
The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout. Please see photos for details. To assemble you will remove the screws from the…
This is a case for the PYNQ Z2 Board. It exposes all IO and Ports. It is secured by screw-inserts, but can be adapted. If you need a version without screw inserts let me know. The design is also available via Gitlab:…
Note: This requires a larger printer as the largest pieces are 306mm wide. I printed mine on a Elegoo Neptune 3 Plus. Features: 3 rear mounted USB ports Rocker Power Switch Internal SATA HD/SSD HDMI port Ethernet 4 internal USB ports (for…
Hallo Zusammen, ich möchte hier einen Spitzschutz für die Teleskopgabel des Elektrorollers Silence S01 (baugleich: Seat Mo 125) vorstellen. Dieser wird mit drei Kabelbindern von unten an der Gabelbrücke der Teleskopgabel befestigt. Auf…
A remix of the simpler PSX SNAC adapter shell originally created by DiniertoDesigns, but without memory card slots. Four M2 x 12 mm self tapping or machine panhead screws will be needed to assemble. Update: With a little help, I found out…
This case is based on the AjSTer a Mister case for A-JAZZ AK33 keyboard by Yurif74. https://www.thingiverse.com/thing:4721208 I designed the case so that all the main cables can be plugged into the back of the case, with the majority of…
I designed this box from scratch as I needed a case that fits only the DE-10 Nano and the USB hub attachment. All other boxes have the analog adapter on top, which I'm not using. Mister parts that fit this box: DE-10 Nano -…
This enclosure is designed for the USB 3.0 SNAC board for the MiSTer FPGA. I designed this because I didn't like the bare PCB dangling around. Screw the two halves together with M1.7 x 8mm screws. I plan to design some enclosures for the…
This is the MiSTer FPGA wedge case to be used with the Teknet 10 keyless keyboard. again check the video for more information.
Simple plate exposing all DE10 Nano connectors for easy access. Specifically designed to fit a a Noctua NF-A4x10 PWM on my MiSTer Mini-ITX Ironclad Plus setup inside a Morex Mini-ITX 557D case, using the included standoffs. Fan screw…
This is just a quick model I did awhile ago for my own purposes. It's the MiSTer FPGA logo as designed by Conrad Fenech but for 3d printing! :) What is MiSTer FPGA? Click below to find out! https://mister-devel.github.io/MkDocs_MiSTer/
Remix of Retro Frog's QMtech MiSTer FPGA Compact Case that has ventilation added to sides and bottom for more airflow. Use buttons from Retro Frog's original model. .2 layer height PLA +
This is my original wedge case for the MiSTer FPGA system. I use the Ajazz ak33 Keyboard that is cheap and easy to find on ebay. Full assembly video can be found at
This is the MiSTer Multisystem2 Digital enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the included…
This is the MiSTer Multisystem2 LCD Screen (flip up cover) enclosure. We will post more internal adaptors and cover panels for different size LCD modules when available. If you design a different LCD cover/mount/enclosure, please share…
This is a reupload of baxysquare's STL from thingiverse to help spread the love for MiSTer. :) Original from here: https://www.thingiverse.com/thing:4812603
This is the MiSTer Multisystem2 Slice tray (Expansion module) enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support.…
Case for MiSTer FPGA that is obviously very heavily inspired by the original Sony PlayStation. Some hardware modifications are required to fit the MiSTer FPGA inside. The power socket needs to be removed from the DE-10 Nano, along with…
Adapter to use common modern CPU coolers in a Socket 478 motherboard.
This is my latest wedge case designed to work with the Mister FPGA and the Multisystem expansion board. I have a full video build guide Buy a Multisystem https://rmcretro.store/multisystem-board-only/
Simple fan plate with honeycomb pattern to mount a 40mm fan on your DE10-Nano without an IO Board.
Designed this for a friend using osprey fpga's. 140mm fans, 2 side x side units. He uses 2 ducts per 2 miners, in and out. Fan shrouds are not necessary but allows for quick maintenance as they go around the fans and can slide in and out.…
Amiga top case (ONLY) for the MiSTer Multisystem built from scratch to use with the 2022 bottom case. Features: Amiga logo Amiga Style case Commodore Logo Commodore Logo inlay print files Easier to fit than the original 2022 model Fixed…
A remix of MASE to use the USB → SATA adapter that i had laying around here. All that i did I just cut the front to hold the adapter and closed the side hole on the original design. Link SATA adapter 3.0 (choose 3.0 on the box) →…
MASE XL - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. This new XL version…
First of all, we have to thank @RetroFrog for his great design! And they allow us to remix his great case. I needed to remix it so it can fit on my Prusa Mini. After I finished the design last fall, he also published a new and smaller…
I create this warp gate for a friend. It can be use to make your warhammer 40K table decoration. Separated in 3 pieces to avoid support.
v2.2: Added a blocker option with a tactile bump, for that satisfying click when the card is fully inserted. Also added different button size options, to account for different height of actual buttons on PCB v1.1: Adjusted the base screw…
TapTo dock plate is available separately at https://www.printables.com/model/1007354-tapto-nfc-consolized-dock-for-mister-pi-case as it has an incompatible CC license. Additional items needed for this: 1.3 inch i2c oled screen:…
Warning: This was my first time modifying anything, I'm inexperienced. So print at your own risk. Removed some sections and the SDD slot to make it fit on my Ender 3 Pro. I also added a hole for a basic power switch. I just wanted a…
These are cases for the active Y/C adapter made by the Retrocastle store on aliexpress. With this adapter you can connect your Mister FPGA to a CRT TV through either the composite or the S-video port. The adapter is sold without any…
This is a Remix of Retro Frog MiSTer FPGA Compact case. It was modified to fit an USB powered USB hub from AliExpress
Just a little tool to stock your cpu collection ;) Print settings doesn't really matter, it is really easy to print ! Maybe just nor print too fast, racks could be hard to insert. (And yes, on the photo, some racks are reversed, little…
Based on the great model from leejsmith, this one is customized for the Keychron K8 keyboard and adds a Zaparoo reader. It needs printing supports for the card reader interior. It includes also an option without card reader. Update 2025 :…
Continuing the effort to make Terrorscape look like an actual horror game instead of a cardboard simulator… Next upgrade: the Fear token. Because if something is supposed to represent rising tension on top of a mansion, it probably…
this is only a minor modification to the top part that allows to expose the board's LEDs (better with transparent light guides) of the board. Thank you again @Retro Frog for the design! See also my Midi Remix for more details:…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Super Nintendo / Super Famicom (SNES) style controller port. The design is based on a USB-C version of the…
Part of the DesktopGames | Terrorscape 3D Upgrade Series I recently got into Terrorscape and quickly realized something important: nothing kills immersion faster than a dramatic barricade… represented by a flat piece of paper. So…
This is a case for a minimalistic MiSTer setup with no I/O board and no USB hub board. It is designed for vertical RAM modules and the popular Noctua NF-A4x10 5V fan (any 40x40 5V fan will do the job). When installing the board, make sure…
Extra parts needed In addition to the components listed as needed in Retro Frog's original design, I also used the following: Right-angle HDMI extension - The one listed in Retro Frog's description was pointing the wrong way for…
Continuing the slow but steady removal of cardboard from Terrorscape … This time: the Noise token. I did try to make it more “3D”. It did not go well. So instead of forcing a worse design, I rebuilt the original properly — in a way that…
This is a case for the MiSTer FPGA console that features LED light pipes. IO board v6.1 and USB hub v2.1 are used here. Clear PLA for light pipes. Screws and standoffs required for assembly. Light pipes are press fit into place. Micro USB…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Sega Genesis / Mega Drive style controller port. The design is based on a USB-C version of the arduino…
Continuing the transformation of Terrorscape into something that actually deserves table space… This time: the Repair tokens. Originally flat. Technically stackable. Practically… not really. So instead of just recreating them, I decided…
Required Hardware 4x M4x8mm socket head bolts (front panel) 4x M4 nuts (front panel) 6x M3x8mm socket head bolts (rear panel) 6x M3 nuts (rear panel) 4x M3x12mm socket head bolts (for mounting the MiSTER Pi stack) Optional Parts Front USB…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Nintendo Entertainment System (NES) style controller port. The design is based on a USB-C version of the…
EBAZ4205 FPGA Case remix of https://www.thingiverse.com/thing:4674827 modified for two push button switches. Print Settings Printer: Geeetech E3D V6 Rafts: No Supports: No Resolution: 0.2 Infill: No Filament: Generic PLA White Category:…
This is a remix of Retro Frog's excellent compact MiSTer case updated for MisterAddons' latest IO boards. It is compatible with the de10 nano, USB hub 2.1, and either the IO Direct or Analog Pro from MisterAddons. You will need 15mm…
Quick Sega Genesis style logo to put on your MiSTer Cases. I recommend using the change filament at layer setting in Cura. It makes printing stuff like this a breeze. I printed mine at a thick layer height. If you're printer is more…
This is a processor cover box for a PGA 478 / socket 478 processor from intel. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm Infill: 5 Filament: Sunlu PETG…
This part was initially designed for my ‘ PluGuard Extensible Collection ’ and can of course be used for other purposes, to measure a gap / space between 2 parts Simply slide the gauge between 2 objects, like on the animation, between…
MiSTer FPGA Atari SNAC Adapter Shell with logo Snap-fit enclosure, versions for one or two filaments. Gcode in zip for multiple filament version with five minute pause for manual filament change after the logo is printed. Doesn't contain…
This is an ITX adapter for the MiSTer FPGA, with space for the USB hub. There are holes to mount either closer or further away from the back of the case. I designed this to drop into a MyRetroComputer My64 Case…
Continuing the transformation of Terrorscape from a cardboard experience into something that actually looks like a tabletop game… This time: the Killer Level indicator. Because sliding flat numbers around while a killer is hunting you…
Continuing the effort to make Terrorscape look like a proper tabletop experience… This time: the Porcupine Door from the expansion. And let’s be honest — the original token is… functional. But visually? Not exactly something you’d want to…
Guards Alchitry FPGA and first layer daughter board. Uses four M2x12 screws and four M2 nuts. Print instructions I used PETG but it would work well with PLA. M2 screws are needed to secure the FPGA and optional daughter boards.
As a retro gaming fan I love my MiSTer FPGA, so I designed a keychain based on its mascot MiSTer Kun. The Logo was originally designed by baxysquare and I used the files from his github page. Thanks a lot. Print it in multiple colors by…
A 3d printable Case for the NEStan-core, made by nand2mario running on the tangnano20k fpga produced by SipeedIO . NEStang Github Project 1x TangNano20k aliexpress 1x ESP32 WROOM32 USBC aliexpress 1x USB-C 2cable Socket aliexpress…
Thanks to @meltmidori for the original design. It covered the audio jack so I made a slimmer version that allows you to still access it. Case used in the photos is here .
start rant < I found a version of this on Thingiverse , but it DOES NOT FIT the R2 megapack boards (despite the title, perhaps there was an earlier R2 run that was differently sized?). Additionally, there are numerous errors in the…
Box for 20 CPUs on sockets: mPGA478 S1 FS1 and more 35x35mm CPUs
When designing the case, I wanted it to resemble an old power brick as it was going to be hidden behind a CRT, but I also ended up taking inspiration from my Thermaltake PC case as well. The case has been designed to protect the micro usb…
I designed and printed a bunch of these for my faculty's computer lab, the latest version being the one with ventilation holes and easy access to the JP1 jumper. I've included some of the other iterations as well, all having the legend…
Attachment hole diameter is 8mm, 5.5mm wide/deep, max 23mm outer diameter around hole. Examples in image are printed in PETG and use generic hardware store shock cord. v2 .stls are for the right one, v5 for the left. v5 outer ring…
Enclosure and stand for SiPEED Tang Nano 20k FPGA to use as a console or just to keep dust off. There is a kit out which has the SiPEED Tang Nano 20k FPGA packaged with some controller port boards and a couple of no-name repro DS2…
This is a simple base plate for an ALTERA FPGA Cyclone II EP2C5T144 Minimum System Board. 4-40, 1/4" screws are used to mount the board onto the plate.
Print out 6 of the player trays, 6 of the sleeves, and 1 of the rest. Pictures will show how to pack away for vertical storage.
Designed to set this stand on top of a Jumpgate: https://www.amazon.com/gp/product/B09TW292LK https://skullnco.com/products/jumpgate-for-nintendo-switch Just peel the rubber feet off the bottom of the stand, and this will stick to the…
This case allows you to, among other things, connect your Mister FPGA to your CRT TV through the component cable while using direct video without having to solder a diode and a resistor on the vga connector yourself. The adapter is sold…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
print in place holder to protect the pins of FCPGA988 or socket G2 laptop cpus
This case allows you to, connect your Mister FPGA to your CRT TV through the composite or the S-video cable. The adapter is sold without any cover, but now with this case you won't have to worry about it collecting dust anymore :) I made…
Hello this is my nfc card super mario wolrd for tapto. need 25mm ntag215. my print: voron 2.4 layer height 0.3mm nozzle 0.6mm
ZX-Uno Pi is clone of ZX-Uno FPGA computer that includes midi and wifi chip onboard. It is open source project and placed on github(gerbers, schematics): https://github.com/tank-uk/ZX-UNO\_Pi Print it in PETG for best results Cover…
Mount the plate with 12mm spacers above the DE10-Nano. Attach the Noctua fan with self tapping countersunk screws A small disk drive (such as a SanDisk SSD) may be secured with ties. Please see the User Guide available on our website for…
MiSTer FPGA SEGA Mega Drive Genesis SNAC Adapter Shell Altered, slightly larger dimension on this enclosure since I couldn't get Mike's design to fit my PCB. Extruded the logo to print with separate filament. Gcode in zip for multiple…
This is a remix of the Stopgap Face Mask (SFM) found on https://3dprint.nih.gov/discover/3dpx-013429 . Made changes to optimize it for a FDM printer Changed the filter frame to more of an insert friction style. Changed the mounting…
Do you run fighting game tournaments on MiSTer FPGA systems? Are you tired of people asking where to plug their controllers in, or using the SNAC port and wondering why their inputs aren't being detected? If the answer is yes, this MiSTer…
Fully 3D printed version. This is for the latest MegaPack R2 release (fall 2024); specifically I ordered my board on Nov 18, 2024. - Also added better 3D printed buttons - Also added some “hollow standoffs” if you don't have extras for…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Nintendo 64 (N64) controller port. The design is based on a USB-C version of the arduino board. The arduino…
This is a processor cover box for a PGA 604 / socket 604 processor from intel. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 200 Infill: 20 Filament: Sunlu PETG…
I've made an PGA 370 CPU holder that fits the LTT-theme, for (almost) all of your turn-of-the-millennium Celeron and Pentium needs! If you need a holder for a different CPU socket, check out my Master List here ! And if you need something…
I've left enough space for branding - in case you want your name on the box.
A quick remix of Retro Frog and Qjao to use with the baords from Aliexpress. print it with filament swap for extra flair!
MiSTer FPGA Sega Saturn SNAC Adapter Shell with logo. Snap-fit enclosure, versions for one or two filaments. Gcode in zip for multiple filament version with five minute pause for manual filament change after the logo is printed. Made for…
This is an organizer for the boardgame Warpgate in the 4 player version and the new Beyond Expansion. Print 4 player boxes and 1 of everything else. I left 3 empty punchboards underneath the stock insert and cut it up a little to save…
The goal was to design a minimalistic enclosure that would allow for inclusion of an arduino pro micro board ( ATmega32U4) and OEM Sega Saturn style controller port. The design is based on a USB-C version of the arduino board. The arduino…
Replaces OEM rubber grommets for thinner diameter braided lines, allows true OEM fit. Must be printed in Soft TPU like Ninja Flex. One design is for brake line, the other for ABS sensor wire clips.
This is a modular screw-assembled case for the EBAZ4205 control board, originally used in the Ebit E9+ ASIC miner. The miner itself is no longer particularly relevant as mining hardware, but its control board has found a second life in…