Counting matching models…
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Following the example set by nemokeine the holes in these have been enlarged from 3mm to 4mm for an easier time getting the 95 paracord through armourcraft's models. 95 paracord is thinner than the more widely know 550 paracord. Shown…
Made a custom cabinet in the shop and wanted some Bosch L-boxx style containers so that I could easily toss them in the L-boxx containers. Tested in the older style for those that might want to know. Each one of these has a 10mm wide…
This is a simple yet useful pet bottle filament maker, follow instructions on YouTube, its in Portuguese but you can enable subtitles and follow just by watching carefully. Filament Tractor Playlist Tutorial:…
/////Updates///// 11.02.2022 Updated hardware needed. All the hardware can be bought at a hardware store for very cheap. For the bearings, I recommend you order on Ali Express. They are cheeeeeep. https://s.click.aliexpress.com/e/_AfxdON…
Improve your aim and enhance your experience by having the stock feel against your shoulder. Designed with Population One in mind but it should work well with other FPS games like Onward, Contractors, and Pavlov.
This project is one of the ten finalists of Hackaday's challenge reuse recycle revamp : https://hackaday.com/2022/06/28/2022-hackaday-prize-reuse-recycle-revamp-finalists/ full details are given here :…
Not many people carry coins anymore, but everyone carries keys! So I designed this keychain to help with the problem. It works with carts in Switzerland and should work with european and american carts (1 euro and Quarter respectively).…
These are the same beads that I designed for my Begleri, just printed and used differently. Designed to use with #95 paracord. You can either feed the paracord through the zipper, like I did in the picture, or you could slip it around and…
These are some ceiling fan chain pulls to help differentiate between the fan and light. I recommend using a brim to help hold the print down during printing. Category: Decor
Modeled with M4 compatible threads for mounting. Holes are 128mm on center. Mirror the asymmetrical model to have a matching pair. Print in original orientation without supports or rotate 90deg, print with supports, and do a color change…
These are tiny cabinet door pulls when the situation calls for something small and discreet. There are two models, an asymmetric version for use with a matching pair, or a symmetrical one which is better suited as a single handle. I…
Modern, classic and fun handle styles for any room. 2mm tap hole. Regular and large sizes.
This is a replacement pullstart housing & cord spool for a 1/10 .18 or larger nitro engine with a 12mm hex. You can view the Fusion360 project here... https://a360.co/3bgZUxZ Obj, skp and f3d files included. EDITS 30/03/18 Has anyone…
Just a quick design I mocked up the other day after seeing in an image macro. This will fit on the mk3s when rotated diagonally (or scaled down).
These are handles, that are the copy of the ones you can buy (128mm).…
The goal of this project was to create a machine that can recycle PET bottles into filament! Build Tutorial: Tips and Tricks: Parts List 1.75mm Drill Bit: https://amzn.to/3QP1AUL Silicone Glue: https://amzn.to/3G7ZPNL Heater Block and…
Features Set any of 8 light styles Set any of 8 fan styles Set overall diameter and thickness Set chain hole size (both top and bottom) Choose whether icon is raised or embossed (cut) Parameter Notes Chain hole Set the top hole large…
Lion Bust Door-Knocker 3 Piece Design Drawer Pulls By: David Orlo Design Details: I originally designed this for a couple of drawers to use as fun drawer knobs, with the idea that I could pay a little extra to have them printed in metal…
This is an elegant Art Deco style drawer pull to compliment my Art Deco Cupboard Handle design . There are three mounting holes - if replacing an existing handle or knob, simply use the central position with a single screw, but if a…
print, paint and glue in place.
The puppy face was remixed from some sand molds that McMadness created. I was able to print with the small flat side down and no support material. I used drywall screws to attach it to the drawer face.
These are simple drawer handles, knobs, and pulls. They were made with PETG. The design does not require any support material. The mounting was accomplished such that the original screw gripped the hole so no special threading on the…
Drawer pulls 3 versions Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: MatterHackers PLA any Notes: Drawer pulls 3 versions Category: Decor
This is mount / arm for Pulsar Challenger GS 1x20. This mount should interface with any dovetail NVG system, (Wilcox style). RIGHT eye version is TESTED by me, worked for several years without issues. It allows some adjustability, Hinge…
A simple holder for 20 SK40 pullstuds. Fits Haas studs, but i bet it will hold others too.
Cardinal drawer/cabinet pull that I designed for my dad's woodworking projects. This model is intended to be printed with the cardinal flat on the build plate. The inner part of the cardinal is intentionally set a layer higher, which…
Just a slightly modified version of the Lack enclosure door pulls for use with round (¼" x 1/8", or 6 x 3mm) disc magnets, rather than the original rectangular ones. There's room for three on each door but I ended up only using one per…
Updated with recessed version
Fits 14 BT30 pullstuds in a 1x3 Gridfinity pattern
Add a little holiday spirit to your printer with some Christmas door handles! No additional hardware, self-taping screws directly into the print!
The wood drawer pulls on my sons chest of drawers came off and were lost and he needed new ones. Instead of just printing some boring standard ones I modeled and printed these that he asked for.
Simple, low profile drawer pulls. There are 5 files, each a different length. Please see image showing hole spacing, based on standard drawer pull/handle hole spacings. I made these different variants: 47.5mm 64mm 76mm 96mm 128mm The…
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 4 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
Boxy drawer pulls I made for my filing cabinet. This print uses m4 hex bolts for mounting. Mounting holes are 75mm apart (center to center distance). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports:…
I have a set of old kitchen cabinets that I use in my workshop. I wanted to replace the hardware with a chunky set of handles and pulls. I designed them so they didn't have any sharp edges that would grab cords or clothing as you walked…
Just a design I made for my friend's kitchen. Printing now and can't wait to install them.
These are drawer pulls I designed. I included both 3 inch and 3 1/4 versions of the leads. The screws are modeled for 8-32 screws and they fit a little tight, but it works well. They are designed for MMU printing. In my experience the…
Basically I needed the original spool to hold the equivalent of more than one bottle, the solution I came up with was to lengthen the spool body. But I elevated this idea so that it could be an "extended" or "infinite" spool body by…
Drawer pulls designed to be 3D printed! Utilized M5-0.8x30mm Socket Head Cap screws with washers both sides and lock nuts to mount into 1/2" plywood and they are the perfect depth. If you use 3/4" plywood maybe use a 35mm or 40mm long…
Use double sided tape to put these on your light/small cupboard or drawers.
This is a drawer pull that I made for my crafting drawer organizer. I replaced the boring drawer pulls with these fun mouse pulls instead. This file is for personal use only, please do not distribute or sell file or prints.
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 3 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
Some drawer handles to dress-up you Ikea Helmer drawer unit (or anything else they fit). There are holes in the back for installing 3mm threaded inserts. Required hardware for each handle: (qty) 2: 3mm threaded inserts (heat set) (qty) 2:…
These cabinet pulls use #8-32 nuts! I designed these to have an embedded nut, so I didn't have to screw into the plastic or worry about super tight tolerances. The black dots on top (totally not eyes) were just a color change, and I used…
Labeled drawer pulls to allow guests easy access to kitchen items.
Cabinet pulls for entry into contest. Themed after the iconic GMC Motorhome from the 1970's. Silhouette of motor home on pull which is threaded for a M4 screw with 0.7 pitch . Approximately 20 mm by 60 mm wide. Two STL's; identical except…
Simple cord pulls that were printed with PETG.
These pulls are replacement parts for horizontal blind pulls that open and close the blinds and raise or lower the blinds. The Blind union combines the multiple cords that raise/lower the blinds down to a single cord with a single pull.…
We purchased a Liebherr Monolith column set (Refrigerator and Freezer), but the cabinet doors for it wouldn't be ready for several months. I modeled these temporary handles to use until then. Warning: The gap between the handles is small,…
Longer, customized bed pulls for the CR-6 se.. Work best in PETG. Remixed from: https://www.thingiverse.com/thing:4602434 Print Settings Printer: Creality CR-6 se Rafts: No Supports: No Infill: 50 Filament: cc3d PLA silk blue Notes:…
simple yet effective, used these glow in the dark rubber rings i bought off temu and some paracord
Drawer pulls with a threaded shaft and nut which fits behind the drawer front. These provide a firmer fit and a more positive feel than the friction fit pulls. The threads are designed to be printed with a 0.6 nozzle, like the drawers…
These were designed in Tinkercad. Printed on my Ender 3 Pro using CHEP's Ultrafast .28 profile IIIdMax PLA+ Printed face down with no supports
Introduction: I've designed these pulls as replacement for broken drawer pulls, or for new drawers. Mounting Options: There are three mounting options: Embedded #8-32 Nut, Embedded M4 Nut, and Front Screw. Embedded #8-32 Nut: Two #8-32…
The object should be printed at 0.2 layer height. There will be a small plug in each hole which facilitates the printing but must be poked through to open up for the string.
Made a tool to hold the ptfe tubing for cold pulls. I didn't see anything for this out there in my search.
For more details about how I made this, check out my Hackaday Contest Entry - Repairs You Can 3D Print. https://hackaday.io/project/57042-home-repairs-with-a-3d-printer/ Print instructions Unassociated tags: cord pull, fan pull, light…
These are a clean, modern, two-piece flush drawer pull designed for a sleek, recessed look on shop furniture, cabinets, or storage bins. The threaded design allows the inner cup and outer pull to screw directly into each other from both…
Two simple cabinet pulls that are ready for mounting. 5-1/16th in span. Can be scaled to other pull sizes.
A little three-drawer cabinet for the desk or workbench: screws and bits, SD cards, jewellery, craft supplies or stationery. Each drawer has a finger pull cut into its front, and the fronts cover the cabinet face for a neat look. Print…
Drapery Pulls I designed these parts so you could feel if you have the correct drapery cord end. These are especially useful for double layers of draperies as when a set of shear draperies is hung with another set. They are also useful…
Cheaper then buying from hardware store and are actually stronger then I thought
Cheaper then buying from hardware store and are actually stronger then I thought
This is an .stl file for Drawer Pulls that are inspired by the inductor schematic symbol. Center-to-center distance between mounting holes: 98.5 mm or 3 7/8 in Mounting these drawer pulls is done by inserting a pair of 8-32 threaded nuts…
Just some simple venetian blind pulls so can know if I am opening or closing the blinds. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1I46m454MDO Category: 3D Printing
I made this design because people like to steal the North Face backpack zipper pulls. And I was tired of having to use my fingernails to open my backpack every day. These zipper pull mounts use a piece of rope to attach them to the…
Round 2-finger recessed drawer pulls. Designed for 2" (~51mm) holes. I used a 2" forstner bit to make the recesses for my drawers. Designed to be screwed in from the back side of the drawer-face with M3 wood screws. There is 6.5mm of…
This is a 2 part, magnetically clasped zipper pull, for the ends of a hoodie cord, a zipper pull, or a paracord keychain. The zipper pulls use 4 6x3mm magnets pressed into the sides of the heart.
Problem… Couple of family members hurt their fingers on the relatively sharp looking Sugatsune DSI-4253-35 doors pulls we have. Minor injuries, but could be mitigated/avoided if design had chamfered or slightly rounded edges, and/or, if…
the old pullstarter broke so I did a new one
Cord pulls for window blinds. Designed for Hunter Douglas, but should work on other brands.
These drawer pulls will brighten up any space. Perfect for a kid's room or any kid at heart's room. 128 mm centers with 4mm inserts. These were designed with the ColorMix feature in PrusaSlicer in mind. In my case I used 5 different color…
Went to two hardware stores and couldn't find exactly what I wanted so made my own. They come in two parts with little joinery pieces to secure them together into one piece (friction fit, or glue if you're paranoid). There are 8 mounting…
OpenGrid Snap Puller T-handle that pulls stuck snaps out of the tile A one-piece tool for removing openGrid snaps (the threaded squares that press into the grid). It screws into the snap's own thread, so you get a proper handle to pull on…
We are building a new office for my wife and she's very much into bright colors. These will be used on all her new cabinetry. She wants to install them randomly with many different colors. You can print them all the same colors or…
Chunky pull tags for coat, bag, tent, sleeping bag and pencil case zips: easy to grab with gloves on or for small fingers, and a quick way to tell bags apart. Twelve tags in four shapes (circle, star, heart and tag) with grip dimples;…
Big, chunky zipper pulls that are easy to find and grab in the dark. Print them in glow-in-the-dark filament and you can find the tent door at 2 a.m. without a headlamp. I made these for the door zippers on our Kelty Daydreamer 4P tent.…
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 4 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
Went to two hardware stores and couldn't find exactly what I wanted so made my own. They come in two parts with little joinery pieces to secure them together into one piece (friction fit, or glue if you're paranoid). There are 8 mounting…
This is a 2 part, magnetically clasped zipper pull, for the ends of a hoodie cord, a zipper pull, or a paracord keychain. The zipper pulls use 4 6x3mm magnets pressed into the sides of the heart.
These are a clean, modern, two-piece flush drawer pull designed for a sleek, recessed look on shop furniture, cabinets, or storage bins. The threaded design allows the inner cup and outer pull to screw directly into each other from both…
