2,007 models
Print in place mini version of the classic push-pin desktop toys. Printed at 0.15 layer height, 0.4mm nozzle, Prusa MK3 PLA standard settings.
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
No supports needed( print it like shown on second picture). Mine is printed with 15% grid infill (2walls). Endured 60kg of force like nothing.
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
I printed these using eSun PLA+ with Gyroid 15% Infill and 0.2mm layer height. It would probably be smarter to utilize a harder material (PETG or ABS), denser infill and more shell layers. As you can see in the video down below however,…
Print approx. €7.57–€9.26 excl. taxPreliminary estimate for one variant
Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Main game element for VEX V5 Push Back 2025-2026. Able to be printed in both alliance colors. Cheep and fast print time. Wishing everyone well for this season:) 5606A
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
This is a tiny little project (about 1 gram of filament), which simply creates a refrigerator magnet out of a 10mm diameter x 3mm neodymium magnet in the shape of a popular type of thumbtack. I bought 35 of these magnets from Amazon (US)…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
I was working on a project where I needed to mount 2 buttons and I realized that I only bought 1 breakout board. Since I didn’t want to order another one and wait for it to show up, I designed a small mounting plate. The dimensions are…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A compact push-button fidget with a smooth spring-loaded mechanism. 🔘 Two spring strengths available — soft and strong 📏 Two sizes — small and large ➕ The large version can fit two small springs , allowing you to mix strengths for a…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I searched for a quick-release filament gripper/clipper that would meet my needs, but I could not find one I liked, so I created a versatile three-way clip. I did not like how an unused filament held on the spool guide of my MK4, as it…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Fitness accessory engineered using FEM analysis and topological optimization techniques. This design combines structural integrity with lightweight construction, resulting in a sleek and organic form that maximizes performance and…
Print approx. €9.65–€11.79 excl. taxPreliminary estimate for one variant
My reverse osmosis water system uses 1/4" and 3/8" push-to-connect fittings. These fittings are easy enough to connect, but slightly harder to release. You have to push in the little ring part and pull the tubing at the same time. Larger…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Introduction: This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for PETGSource material: PET
Wide Push Button for SodaStream Crystal 2.0 I created this push button for people who may not have as much strength in their fingers (anymore) and thus have trouble pushing the standard button on the SodaStream water bubbler . With the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
I was really bored of all the hooks for the Skadis pegboard. So I needed something which can be pushed trough from the front. I wanted something that can hold something in place with even only one screw. So there is my solution (after…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Einfacher Schiebestock für die Werkstatt / simple pushstick for Workshop
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant
This is a push pin/tac dart it requires a 4mm nut for nose weight and a tac and a little bit of glue you print it glue the 4mm nut to the bottom of the tac with a little hot glue or superglue and the put some glue in the darts hole and…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
If you don't want to use voice activation on discord and a ptt key is clumsy during gaming, maybe this foot pedal will help. This pedal holds a arduino pro micro with the ATmega32u4 chip. This chip allows the arduino to work as a usb…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
A historic Sikh Weapon Katar Push Dagger designed in Fusion 360 not an accurate model with the rounded handles, just a simple extrusion of the 2D outline will work on this in more finer detail in the near future
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Push-ups / Handstand gripper
Print approx. €9.15–€11.19 excl. taxPreliminary estimate for PETGSource material: PET
Remix of @lukfilipsk stake pusher.
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
This is a pusher for the Philips food processor for the HR 3140-3142-3145 models. STLs available must be printed in the original orientation, like a vase. No supports needed. No glue needed, just fits perfect. I hope you can fix your…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
This is a print-in-place replacement wheel for an old series metal Canadian Magen David Adom donation box. Required hardware One M3x20 socket head screw per wheel Printing instructions Print the .stl file as-oriented (outside part of the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Hi! I designed this adapter for a Guider IIS printer. It is a non-invasive upgrade to install Push-to-Connect Tube Fitting M10 or M6. Check the model here: https://a360.co/3EPP8SS You can use M3x10mm to hold the part at the same holes as…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Replacement push button for the Icy Dock MB982SP-1S 2.5" to 3.5" hard disk adapter cage. The original part is made of fairly brittle plastic, and due to the heavy swinging door often hitting it with force in a particularly nasty way, the…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is the first version, it's not 100% perfect but good enough for me now, but maybe not to your full expectation :) Need some time, feedback and will do a refinement once I have some time and testing. It's good for me now Maybe it is…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This model takes a 6 x 3 mm magnet and makes it look like a push pin. I've included the FreeCad file if you want to make it fit your magnets, I'll add more sizes later.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Habe mir einen Adapter konstruiert für Ventilanschlusskopf Push-to-Connect-Fittings weil ich einen längeren PFTE Schlauch gebraucht habe für meinen M4 Voron Extruder.…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Warning : if you are not familiar with electricity and electrical mains connections, do not play with it. The mains voltage is dangerous. On my Singer sewing machine, model 101, Bakelite jacket (P/N: 190552) to mains socket cable…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Push stick for pushing wood on a jointer or table saw. Printed in PLA+ but any other filament should do
This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed. The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR. Compared to other…
Replacement part for Infiniti "push pin clips." Because I was unfamiliar with these clips and did not know how to remove them , I tore up several when removing the under-hood cowl when replacing my battery. So another chance to sketch…
Most of the simple push drill models ( mine included ) have the annoying feature that the drill bit reverses every time you pull the sliding nut back up to the top. This version solves that problem by encapsulating the sliding nut in a…
Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request. Print instructions Category: Hand Tools Summary Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request.…
This model will need support for the tail. And may need some build plate adhesion, because only a small area of the body and legs are touching. Made two versions, one is an ornament version and the other a non-ornament version.
Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…
Table saw push block. Print flat. Recommended at least 30% infill and 4+ walls for strength.
cap for 12x12x7.3 mm button switch
GENERAL The model is designed to be (de)mountable with allen bolts and nuts. As such the finished model is very suitable for educational purposes. Engine A Overhead Valves engine is an internal combustion engine with the valves placed in…
Pen/Pencil/Tool Cup Holder Multiboard Push-Fit Mount
Plier Holders for Multiboard, prints without support
Had my first clog on my Bambu X1 and realized it was not an easy task to clear it as is :) Jump into cad 10 min later my Prusa Mk3s saved the day! How to use it: Undo the hot end when cold, you don't want the fan running as it can touch…
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
Push-In Rivets with Ribbed Shank. Commonly found in automotive interiors. Step file included Print in ABS, ASA, Nylon, 0.1 layer height recommended. [Updated 03122025] Repaired some mismatched structure, added V2 & V3 Added V2 with center…
I removed the gap in the switch cap, so it's easy to print upside down.
The original file was too low poly to make the slicer give nice perimeters so I recreated it in Blender to make it smoother.
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…
This toothpick dispenser is a fun and practical way to elegantly offer a toothpick! Just press the button – one toothpick rolls forward and you can easily pick it up. Perfect for the kitchen, your desk, or as a surprising little gift.…
UPDATE(2/5/23) IMPORTANT PLEASE READ! It seems that after the case stays closed for a while the “arm” becomes deformed and doesn't spring to its original position making the case not open correctly so I designed a new base cap and path…
This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…
This is my attempt at making a compact push latch mechanism. The whole unit is approx. 30mm x 30mm and reliable. I used these to store and release my portable hard drives. It can be seen in action here…
Inspired by Speedy777's Pump Drill ( http://www.thingiverse.com/thing:731086 , which was inspired by Performance 3D's drill), this slightly beefier version features an adjustable chuck that can handle bits from 5mm (3/16") down to 1.5mm…
Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…
This latest version of my push drill uses a collet chuck (rather than a 3-jaw chuck) for increased gripping force. The set of collets provided will handle diameters from 0.25" (6.35mm) down to 0.044" (1.1mm), as well as standard ¼" hex…
IMPORTANT! I do not recommend printing this! It was designed with my old printer in mind (which had horrible tolerances). The design is also imperfect, with the “spring” wearing down over time and it overall running roughly. I apologize…
Small hand-held push-counter, single-digit. Contains just four 3D printed parts and a spring from a Bic Clic-Stic ink pen. Has more of a "squish" feel rather than a click. The numbers were colored black using a fine tipped Sharpie. Made…
I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.…
Hello there folks. I wanted to share with you our newest model of pusheen pumpkin cat :) Specs : Print with 0.2 layer height That's all folks :) Print Using MMU3 or AMS
Something I made for a friend. Just sharpie the eyes in. This is designed off the DCS row 5 (meaning it's height is for ESC keys or Function Keys). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Pusheen is described as being a female fictional cat who loves blogging, snacking, and going on adventures.
With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…
I saw and printed sabesnait's Push Opener immediately. Impressive functionality and design! Thanks for sharing! However, this bottle opener didn't work reliably: the cap came loose when opening 2 out of 3 bottles, and the rubber ring…
A simple push-on-push-off mechanism that uses a standard ballpoint pen spring. Seems to work well when printed in PETG. There are now 3 models: The basic mechanism A slightly improved mechanism with an actuator arm A mechanism with a…
Remix of the Filament Cutter Holder or Needle Nose Pliers to work with the Multiboard system. Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
I just measured these out and put them all in one place for an easy grab. I also notched the two inserts titled "Power Supply" to adjust for the screw heads holding the power supply on. Remove safely from bed as not to bend. I aligned…
Print in place mini version of the classic push-pin desktop toys. Printed at 0.15 layer height, 0.4mm nozzle, Prusa MK3 PLA standard settings. Haven't printed it yet but will likely be a long print, >20hr.
A Over Head Valve (OHV) engine is an internal combustion engine with its valves placed in the cylinder head. This model is designed to be (de)mountable with allen bolts and nuts. As such the finished model is very suitable for educational…
I designed this actuator to use a common push-push latch with my Magnetic IDEX DIY 3D printer Link to Push Latch: https://amzn.to/3P1Hbwc Push-Push Latch CAD Model NOTE: The original download link/URL is broken. Added the complete STEP…
Do the exposed PCB's of the Ender 3 Pro push sensors bug you? Me too. That's why I made these. Just pop them on and enjoy.
This hook can be easily hooked by simply pushing it in. Need for printing flexible filament print example TPU. Does not work with PLA, ABS and PETG. This hook itself should be fixed to the wall with screws. Print settings: Material: TPU…
A lens hood for your 50mm lens (filter diameter 49mm). No thread - just push on. Use the Fuzzy Skin option in PrusaSlicer if you wish. No support required. Paint the interior matte black. Do you like it? Please consider to buy me a cup…
Adorable Pusheen kitten shaped as a pumpkin pot, can be used as container, plants, etc. Super easy to print and needs no supports at all. The face can be painted in under 1 minute with a rock marker, or you can paint it on the slicer if…
MISE À JOUR / UPDATE - 27-01-2017 Modification de la pièce "router plate", l'espace entre les molettes et les montants sur les côtés a été augmenté de façon à ne pas gêner les molettes lorsque la plaque est entièrement remontée. La pièce…
Introducing what I believe to be the perfect Gridfinity baseplates with a good balance between functionality while lowering material use. Quick Video Guide I wanted baseplates that could be used standalone or fit together to create one…
Use Push 2 with this twenty-degree tilt table stand for even more comfortable music making. You can print the stand with 5% infill and logo with solid infill. I use “hilbert curve” for top and bottom pattern but you can use quicker…
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Single Cutter/Plier Holder Push-Fit for Multiboard
Same stick Lindh3D designed with a taller handle and grip imprints for a better grasp. Also added a thumb rest making it easier to push down with thumb pressure. I hang my push sticks within reach so I added a large hole to hang it by the…
This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…
Print orientation has a huge effect on strength of this! PETG or ABS is recommended.
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
Pussheen Cat Cookie cutter for all daughters. 0.2 mm 2.5 grams of filament 20 minutes printing time
When downloading, do not forget that you do not need to click Download All, because in this case you will get a 404 error, because the site is broken and no one is going to fix it. Download files one at a time by clicking Download each…
Simple push stick for table saw use. Recommended at least 30% infill and 4+ walls for strength. Print flat for best results.
No special printing instructions required. Look good with filament change at 1.1mm height.
the design is inspired by the Lambo stater cover... enjoy
Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…
Features A variety of button caps for square 7x7 / 8x8 / 8.5x8.5mm PCB push button switches Works with any switch with a 2x3mm square mount, either friction-fit or glued in place Choose from various shapes & sizes, or make your own with…
This is a sight pusher for Glock Slides. This device will hold the slide in place and allow pushing the sights off a Glock Upper Slide. You will need the following hardware: 4x 5/16 Nuts 1x 5/16 3.75-4" Bolt 1x 5/16 1.25-1.5" Bolt…
I made this because I lost the pin to one of these fasteners on my motorcycle. I decided to make the entire fastener in case I needed the whole thing. 0.20 layer height 100% infill Brim used on pin print by object instead of by layer…
Dimensionally and weight-accurate model/print file of the 2025-2026 Vex Robotics game element, for the game Push Back.
Each model is printed in duplicate and then merged. This results in a better quality model.
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
This push-release support for remote is a remix of the 2 following: https://www.printables.com/fr/model/223384-google-chromecast-tv-remote-push-click-mount by ByteSlinger…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
WARNING! You have to have no stringing! This model contains narrow gaps. If they are clogged by strings, it won't work, or it'll require a lot of cleanup. So dry your filament and test your stringing before you blame me. Or print on a…
