8,704 models
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Hi there! There are 2 versions of this print, one without and one with holes. I use the pot for different kinds of indoor house plants. Most of my happy pots i printed with 5% gyroid infill it's very sturdy! In my opinion you could use…
Print approx. €13.95–€17.05 excl. taxPreliminary estimate for one variant
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Here is a figure of a cute grumpy turtle, which is sitting on a rock.
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
We all know that trend going around where we're sticking the famous people's heads on the articulated octopus, so why put the all-time best animal on there as well? Introducing the Capypus! It was made from Cute Mini Octopus by McGybeer -…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CAKE TOPPER HAPPY BIRTHDAY Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays, and…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Print approx. €87.94–€107.49 excl. taxPreliminary estimate for one variant
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
First of all, I am not the initial creator and only did some adjustments specially for Prusa Printers all credits for this awesome work please to this Guy: https://www.thingiverse.com/thing:3356047 Hello all, I still feel that MMU2s…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
Sculpting practice of Spyro the Dragon by ninonic99 , based on the Reignited Trilogy. Originally uploaded to Blend Swap .
Print approx. €6.19–€7.56 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - For support enforcers only (See image) Check this keychain below: Link If you like my work consider Buy me a coffee 😊
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Just a Capybara that I found on some random FTP site years ago. Nice texture, needs support to print cleanly. STL, 3MF and BGCODE included.
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Happy tooth Bobblehead - something new for dentists in the clinic The model has a 4x2mm magnet base String, base and negat. volume used by the author : 3D Printy Other tooth-shaped stands for drills, stands for pens and brushes can be…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Anya Forger From Spy Family. Anya2.3mf and .obj are both updated with thicker dress and (hopefully) no holes. I will leave the old ones up for a bit. Please use Anya2 models.
Print approx. €15.67–€19.15 excl. taxPreliminary estimate for one variant
Print Settings Material: ecoPla - Satin Purple Nozzle: 0.4mm Layerheight: 0.2mm Spiral vase: On Supports: None Post Process Not necessary
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
HAPPY BIRTHDAY glasses with funny bobbling letters. Fits on Prusa MINI (see the last picture). If you want “MERRY CHRISTMAS” glasses you can find it here https://www.printables.com/model/669553-bobble-merry-christmas-glasses. Short…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
Print approx. €44.82–€54.78 excl. taxPreliminary estimate for one variant
Inspired from existing "Stoppy Stoppy" stopper available in the market.
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
Here is a Capybara trophy, Capybaras are the biggest rodents
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…
Print approx. €10.06–€12.30 excl. taxPreliminary estimate for one variant
These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Maya Pyramid Dimension below
Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
A lovely capybara keychain
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
Attention, this is just a joke, not for real use! Is a sudden revolution breaking out in your country? Or do hordes of zombies surround your house? Don't have any weapons, just a 3d printer? Don’t worry, you’ll be done in a two hours and…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Update: Customizable Version Now Available Please check out the new OpenSCAD version here: https://www.printables.com/model/1071373-customize-your-happy-birthday-cake-topper-lego-sty Original: This is a cake topper designed to look like…
Print approx. €9.84–€12.02 excl. taxPreliminary estimate for one variant
We were still missing a child-friendly but spooky little house in the shape of a coffin for our Halloween decorations. It is perfect for two LED tea lights so that the windows are illuminated in the dark for a great atmosphere. The new…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE BOWSER KEYCHAIN Bring the joy of the Guardians of the Galaxy to your daily life with the 'Happy Groot Keychain'. This 3D model delightfully depicts Groot, the beloved tree-like creature,…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This 3d model for Easter features a cracked egg with a little chicken that jumps up when the egg is pushed down. It makes for a cute and interactive decoration. You don't need to use supports! Every make will be featured on my Instagram…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
Creepy Clown Head
Print approx. €21.39–€26.14 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer bottom surface: Print on a textured plate. For a nicer top surface: Change the Lift Z to 0.1 Top…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
A larger pyramid style challenge coin holder designed to display 10 coins of 40mm diameter displayed in 45mm diameter cases. Want a smaller version? Check out my smaller 6 coin pyramid holder here ! Prints great in PLA at 0.2mm with…
Print approx. €8.66–€10.58 excl. taxPreliminary estimate for one variant
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
Print approx. €11.15–€13.63 excl. taxPreliminary estimate for one variant
Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Coconut Capybara – Burbaloni Loliloli edition! This adorable little creature is half coconut, half capybara, and 100% brainrot joy. Inspired by the Italian meme universe, this chill buddy is perfect for fans of the absurd and wholesome. ✅…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Material: AzureFilm - Silk Sand PLA Layerheight : 0.2mm IS (Structural) Support: Yes (custom or automatic paint) Infill: Lightning (for filament save) Perimeters: 3 (for durable)
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
Floppy eared rabbit modified from the Sandford bunny
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Print approx. €1.44–€1.75 excl. taxPreliminary estimate for one variant
Modèle de la pyramide de Sierpinski, modélisé par moi-même. Model of the Sierpinski pyramid, modeled by myself. Instagram: @roiku3d
Print approx. €12.70–€15.52 excl. taxPreliminary estimate for one variant
Print instructions Body No infill needed. Head 10% infill No supports needed since all bridging will be hidden from view and will not affect the moving parts. Paint the stem, eyes and mouth. Arms Attach the arms to the body using a piece…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This model is a detailed, scale reproduction of the Y25 single-circuit 400 kV high-voltage tension pylon , an essential component of high-voltage electrical grids. The design is based on a precision 3D photogrammetry scan taken in the…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
The ring segments for a Happy planner notebook organizer. I printed with tricolour PLA, 0.20mm Quality .4 nozzle Supports on build plate
Easy to make a happy Alien keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Easy to make a cute happy Shark keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Made in student version of Autodesk so quoting: “May not be used for commercial, professional, or any other for-profit purposes.” Only educational or research purposes so you can give me some feedback on what i did wrong etc. It takes a…
Print approx. €11.73–€14.33 excl. taxPreliminary estimate for one variant
The object is printed with the front side facing the bed.
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Calling on all jigsaw puzzle fans. If you like puzzles, this original design is for you! I'm a huge fan of boardgames and puzzles and I thought it would be really cool to design an original jigsaw puzzle for 3D printing. I came up with an…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Dive into the mesmerizing geometry of this Spiral Pyramid Fidget, designed to anchor your focus and satisfy your senses. Featuring deep, organic striations that wrap seamlessly around a sharp tetrahedral base, this artifact offers a…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Simple remix of this pretty fish. Subtle smile, pupils and a tail fin in motion.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Design Concept The Cute Capybara Keychain is inspired by the adorable and friendly nature of capybaras, designed in a cartoon style to bring a touch of whimsy and joy to your everyday items. Purpose This keychain serves as a charming…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Woggle neckerchief scarfring pasapañuelo for Scouts and CubScouts with Capybara (Carpincho)
This is not just another Painters Pyramide! OK, basically it is. But I made an additional adjustible version to avoid wiggling. I provide a 3mf-file which contains a set of 3 non-adjustable and 1 adjustable Pyramids. All together these…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Happy Shark and Angry Shark Kit Card. Do you live like a happy or angry shark? ….. (updated with the individual sharks)
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Happy Feet Penguin: Child
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
Infill: 10% Supports: 55.0° everywhere Layer hight: 0.2mm X-Size: 35mm Estimated printing time: 2H Wight: 14g
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - For support enforcers only (See image) If you like my work consider Buy me a coffee 😊
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…
This is a top and bottom for a bare 5.25" floppy drive such as the TEAC FD-55GFR. It is almost certainly compatible with other TEAC FD-55 drives, and likely with other floppy drives of the same vintage. (Note of course that the 5.25" is…
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for one variant
Easy to make a happy anatomical Heart keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Mount for 5 3.5 inch drives I wanted to mount 5 Floppy drives on top of each other to experiment with playing MIDI files trough their stepper motors (See: Floppytron ). While searching for the mounting hole specs I found that these were…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Creepy Garfield Meme.
Print approx. €18.79–€22.97 excl. taxPreliminary estimate for one variant
This includes the button and a face for a floppy drive. The button snaps into the ejection mechanism and is kept straight by the face panel. The face snaps into the bottom portion of the floppy. Top portion tabs of the floppy face are a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Happy Anniversary to family or friends to let them know you are thinking of them on their Anniversary! To congratulate them on being married another year! The marble one and the two tone one was done on my Bambu and the multi colored one…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Easy to make a happy anatomical Lungs keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Color order Start with White (light), then Black (dark) Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE HAPPY ANNIVERSARY CAKE TOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Easy to make a happy Coffee Machine keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Flourishing. On her lane. Moisturized. Unbothered. Capybara! It really floats: Printing Advice Pre-sliced files included for both single and multi color print. 5% infill (grid) 0.20mm (quality / structural) Seam set to “rear” For MMU: No…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
An extra large Snoopy keychain for all who love Snoopy (10cm), But if you want, you can make it smaller with the attached FreeCAD file. Or directly in the Prusa Slicer. In any case, you still have to set the color change manually.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
I designed this in PrusaSlicer using 2 pyramids. It is pretty much a vase mode part and it is stackable for easy storage. I used PETG and .4mm layer heights with a .6mm nozzle X.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The natural habitat of the wild pyritehog is the depths of dry rocky dark caves, but it has also occurs in the hidden corners of human children's rooms They are more active at night, thereby causing great annoyance to other living beings.…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
The A-mazing Irregular Tetrahedra "A", the geometric sensation that's taking the alphabet to new dimensions! Print-tested on a Prusa Mini: 0.4mm nozzle, 0.15 layer height.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations. In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys Available…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
Bicycle valve caps are notoriously dull. Not this one. Guaranteed to bring a smile to faces when printed in bright color. For the sharpest pixel effect print using 0.25mm nozzle. However the standard 0.40mm nozzle is fine too. Should fit…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Always annoyed by commercial SEM stub holder for four stubs, while I can have five samples in one run. So I decided to design an holder for five SEM stubs (standard stub with a diameter of 3.2mm) The cover fits perfectly on top of it, but…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant
Design Concept The Happy Skeleton with Pumpkin Figurine/Keychain embodies whimsy and Halloween spirit with a cheerful skeleton holding a carved jack-o'-lantern. It merges playful elements with classic Halloween symbols. Purpose Ideal for…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
High voltage electricity pylon (tower) suitable for G (LGB) garden railway or any other model landscape for children. Real wires can be used to provide the low-voltage power to the model landscape/railway. Gcode file contains the suitable…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
A creepy spider to send shivers down your spine this Halloween! Use tree supports, brim, back seam position. ✅ 25 mm tall – small but terrifying presence ✅ Perfect for pranks, spooky decorations, or hiding around the house 🕸 ✅ Easy and…
See-through spider with just the right thickness (1mm) to be flexible. Decorate your house or scare the kids. Easy and fast print (20min). Print instructions Feel free to scale this up or down but 1mm thickness (z-axis) is recommended.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I split the design up into 3 parts for easy printing the magnet I used is a 6mm dia x 1mm thick Neodymium Magnet 0.35kg Pull. I have also included blank disk labels template so you can create your own custom labels. Please share your…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
EN : The money clip can also be used as a staple in the office or wherever you want to stick something together easily. Slicing is best with 0.1 or 0.15, but 0.2mm is also possible I have used 0.15 in the existing gcode files. In…
Design Concept The Cute Happy Cat Keychain is designed to bring a smile to cat lovers. Its adorable expression and simple design make it a perfect accessory for any set of keys or bag. Purpose This keychain serves as a delightful…
I've seen the new Lego set Happy plants ( 10349 ) and I liked it so much, but I thought it was quite small and can't be used for real plants. So I made this model to print and put real flowers in! There is inside pot that you put dirt and…
Print approx. €15.63–€19.11 excl. taxPreliminary estimate for one variant
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
