Search results: q1

Sort order

472 models

P
PrintablesFlo

Keychron Q11 tenting kit including wooden wrist rest

This tenting kit for the Keychron Q11 lets you attach wooden wrist rests to your keyboard for better ergonomics. To attach the wood pieces to the tenting kit, you need to drill some slots into them that match the pins on the printed…

Downloads
132
Likes
11
Rating
5
P
Printablesk.yoshioka

wrist rest for my tented Q11 (ver.3)

rubber foot 8 pcs I redesigned wrist rest to make more comfortable. They take more filament and print time but better than before. Added 25mm depth on each parts.

Downloads
46
Likes
6
Rating
0
P
Printablesjcjames_13009

NECCHI Q132A sewing machine spool pin

Design : I design the part in Fusion 360 similar to the original part of my NECCHI Q132A sewing machine. There are 2 things to be considered that are key fort a correct installation and fitting. The bottom part must fit the 6mm square…

Downloads
43
Likes
12
Rating
0
P
PrintablesRealPrint

Mount for an SQ11 camera on a model railway. / Halterung für eine SQ11-Kamera auf einer Modelleisenbahn

Mount for an SQ11 camera on a model railway. The SQ11 can be used as a webcam under Windows and thus provide a live image. Halterung für eine SQ11-Kamera auf einer Modelleisenbahn. Unter Windows kann die SQ11 als Webcam genutzt werden und…

Downloads
40
Likes
8
Rating
0
P
PrintablesHawkeye

0.8 MOD gear 60T (for the orginal focuser wheel of Takahashi FSQ106N telescopes)

0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.

Downloads
15
Likes
2
Rating
0
P
PrintablesSyntactics

Qidi Q1 Pro Riser

Like many other users of this printer, I also did not want to scratch my top clear panel with the ptfe tube while printing. This model is designed for a newer revision of the Q1 Pro (The one with the bed endstops) since I believe the…

Downloads
1,959
Likes
240
Rating
4.93
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Heat Loss Plugs

The plugs help mitigate heat loss below/beside the XY steppers, where there are big gaps leading to the back of the printer. Print these out of TPU, they are made to fit snug. Easy to install, flex them into place. You need to remove the…

Downloads
1,432
Likes
248
Rating
4.93

Upper spool holder for Qidi Q1 Pro

Support de bobine pour Qidi Q1 Pro. Plus solide que l'origine, et surtout placé au dessus de la machine, donc libère de la place. Version sans démontage de la base sur l'arrière de la machine. Sans vissage ni collage. Prévoir supports sur…

Downloads
1,272
Likes
131
Rating
4.2
P
PrintablesHyperPrints

Qidi Q1 Pro Lid Riser, Styled

I've used some of the other risers, but they didn't flow with the Q1 aesthetic. So I rounded things out a bit and made it snap-together. The corner pieces have built in support for printing. You will need 2 of each corner and 4 of the…

Downloads
1,228
Likes
150
Rating
4.25
P
PrintablesStrawhatcoder

QIDI Q1 Pro Toolbox

Ultimate 3D printing accessories toolbox - 3D printed. Features: Slots for allen key set from 1.5mm to 3mm with holes for magnet Slot for 6 nozzles Slot for Screw driver Slot for a number 7 wrench Slot for a nozzle cleaner tube…

Downloads
1,192
Likes
168
Rating
4.5
P
Printablesscottishblondie

Remix of Qidi Cutter V2.0 body for Q1 Pro

I came across @MARCPRUDHOMM_1986375's excellent design for an inline filament cutter designed to fit the Qidi X-Max 3/X-Plus 3 models, but found it didn't quite suit my Qidi Q1 Pro. The longer tube on the bottom of the original body did…

Downloads
1,117
Likes
156
Rating
4.67
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Rear TPU Seal

Very simple, easy and quick TPU strip that helps close off the back of the printer to mitigate heat loss and contribute to cooler electronics. It presses against the back panel for a tighter seal. Related Models: Qidi Q1 Pro Exhaust Port…

Downloads
1,004
Likes
157
Rating
5
P
PrintablesHroft

Qidi Q1 pro light-proof visor

I don't really like the glare from the backlight on the camera of my Q1 pro. Therefore, such a light-proof visor was made. It doesn't stick out much, it's hard to touch, it doesn't obscure the image much -it works.

Downloads
1,002
Likes
106
Rating
4.78
P
PrintablesJasonWorkshop

Q1 pen holder

I have always had a strong interest in color pens and I need some pen holders to store them, but I couldn't find suitable styles on the market. Therefore, I came up with the idea of designing a simple and beautiful pen holder that is easy…

Downloads
997
Likes
374
Rating
5
P

QIDI Q1 Pro Internal Exhaust Duct

A 45mm or so long duct to connect the QIDI Q1 Pro's print chamber 60mm internal fan to the vent at the back to allow hot air to escape without heating up the electronics. The original idea was based on the model below, only as I have my…

Downloads
951
Likes
142
Rating
5
P
Printablesafedorov3

Aqara WSDCGQ11LM holder

Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.

Downloads
918
Likes
127
Rating
4.85
P
PrintablesRedShark

Qidi Cutter V2.0 - Q1 Pro Version

I have adapted the original model of the Qidi cutter so that it can be used for the Q1 Pro. There is already a version from "scottishblondie" but it sits very loosely on my printer and can slip off the print head. For this reason I have…

Downloads
895
Likes
111
Rating
0
P
PrintablesShokus

Keychron Q11 Tenting Kit

A tenting kit for the Keychron Q11 split keyboard. Designed to be a snug fit, the holes in the model align with the factory feet on my keyboard to keep it in place - no disassembly required. There are two 3mf files: One for a 25-degree…

Downloads
851
Likes
47
Rating
4.75
P
PrintablesNotDalle

Qidi Q1 Pro Fist Layer test

layer height of 0.2 mm

Downloads
846
Likes
35
Rating
0
P
PrintablesJeffery Strahan

Qidi Q1 Pro Filament Cutter

v2 of the cutter Unclip drag chain and remove bowden tube. Slide cutter under the drag chain slip over drag chain mount and insert bottom of cutter into bowden hole on print head. Reinstall drag chain and insert bowden tube into top of…

Downloads
845
Likes
177
Rating
5
P
Printables3Dwork.io

QIDI Q1 Pro Motherboard Fan Plate

QIDI Q1 Pro electronics air flow can be improved, this mod was created to add 80mm 5V, you can use 24V using parallel power splitter using the stock fan, fan holder. If you use 5v, much quieter and enough air flow, you can connect the 5V…

Downloads
800
Likes
95
Rating
4.83
P
PrintablesJeffery Strahan

Qidi Q1 Pro Bed Adjustment Knob v2

All in one. Print in place. Qidi Q1 Pro bed leveling tension knob v2. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. I've also updated the screws_tilt_adjust macro so it probes a reference point in…

Downloads
785
Likes
90
Rating
5
P
PrintablesEafq78

QIDI Q1 pro Lid Riser

Ready to print in the Q1 pro, please use Orca from 2.0 RC comes with the Q1 pro profiles ready I use ABS but you can use PLA+, PETG, or ASA too. please be sure to make the skew correction first and flow calibration look this model XYZ…

Downloads
760
Likes
75
Rating
3.67
P
PrintablesUser27

QIDI Printers (Q1 Pro, Plus4, X-Max3, X-Plus3, Q2, Max4) Spool Holder with Bearings

I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…

Downloads
728
Likes
99
Rating
5
P
Printables8jack

Qidi Q1 Pro 360° part cooler duct

Update 22.12.2024: ---- Update the models with the the bump to avoid the self rotation and add the STEP files for the original fan. ---- The airflow is much better than before, so try it out and please give feedback. I have use it for…

Downloads
709
Likes
140
Rating
4.9
P
PrintablesMarek Wojnowski

QiDi Q1 Pro camera cover

Stock camera configuration in QiDi Q1 Pro 3D printer causes unnecessary image quality degradation because of LED light falling directly to camera lens (at least if you have the same Q1 Pro version as me, because I can see that QiDi…

Downloads
698
Likes
95
Rating
4.86
P
PrintablesDiesel336

Qidi Q1 Pro tube bracket on chain

A simple holder for the Teflon feed tube to the extruder chain. Prevents chafing of the top cover. I printed from petg 0.2 layer height, 0.4 extrusion width

Downloads
693
Likes
80
Rating
4.88
P
PrintablesimaginCZ

QiDi q1 PRO - stínítko kamery

Stínítko kamery pro QiDi q1 PRO - odstínění svitu z osvětlení uvnitř komory. Vytištěno z PLA - zatím mi drží, ale rozumnější bude např ASA, nebo jiný teplotně odolnější materiál, neboť q1 PRO má vyhřívanou komoru, až na 60°C. Materiál -…

Downloads
687
Likes
69
Rating
4.67
P
PrintablesSteveC

Qidi Q1 Pro Nozzle Wiper Base Replacement

Preface: *This mod does not replace the mount the base is attached to. There will be a future mod that will replace the entire unit. * Two options are available in this mod that utilize the Plus 4 silicone wipe pad, or the Q1 Pro felt…

Downloads
667
Likes
135
Rating
5
P
PrintablesSafetyHammer

Qidi Q1 Pro Filter & Scrubber (Hepa and Carbon) External

External Filter / Scrubber for the Qidi Q1 Pro consists of three parts: Mount Base, Hepa Box Activated Carbon Box. The design includes rails that allow for easy removal of both the HEPA and Carbon boxes without the need for any screws.…

Downloads
654
Likes
103
Rating
4.25
P
PrintablesIgor R.

Qidi Q1 Pro 100mm Exhaust System

I created this exhaust system for my own printer/window setup, but sharing it here if anyone needs something similar. Minimal supports required, all the STLs should be in the correct printing orientation and do not require supports,…

Downloads
640
Likes
100
Rating
5
P
PrintablesJdeV99

Qidi Q1 Pro - Lid Riser

Remixed the original to print with less supports. Changed the joints to be in the middle of each section. Added corner pieces (the green bits) to keep riser inside top of printer. Corner pieces to be glued onto riser bottom. Print 4x…

Downloads
624
Likes
81
Rating
4.67
P
PrintablesVelaptic

QIDI Q1 Pro Exhaust Duct and Fume Extraction Port With 90 Degree 3" Swivel Elbow

A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…

Downloads
617
Likes
101
Rating
5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Exhaust Port Cover

Simple and quick exhaust port cover for the Qidi Q1 Pro. Use to mitigate heat loss and fumes exiting the printer. Works with existing screws, no additional hardware needed. Note: The back of the printer has large gaps exposing the…

Downloads
611
Likes
82
Rating
5
P
PrintablesAlvomane

Xiaomi Aqara sensor compatible back plates / Befestigungsplatte for zigbee model WSDCGQ11LM or DJT11LM

Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…

Downloads
584
Likes
133
Rating
5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Poop Bucket

Filament keeps getting hung up on the stock purge bucket and also fills up fast. I made this purge bucket wider all around so the filament doesn't get caught so much and also much deeper so it doesn't need to be emptied as often. Slots…

Downloads
580
Likes
121
Rating
5
P
PrintablesChewey

"Chewey_GLK-17_Q1" Oculus Quest 1 VR pistol grip

IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, see here . Introducing the "Chewey_GLK-17_Q1"! For more details, please refer to…

Downloads
546
Likes
93
Rating
0
P

Qidi Q1 Pro Internal Fan Mount with USB Cable Space

When using an ethernet adapter instead of Wi-Fi on the Qidi Q1 Pro you need additional space for the USB cables, by moving the fan slightly on this mount and providing space for cable passthrough, the needed space is easily available.…

Downloads
544
Likes
60
Rating
5
P
PrintablesMarek Wojnowski

A tool holder for QiDi Q1 Pro

I have printer it in PLA. Please use a double sided adhesive tape for mounting. I do not guarantee that you have the same toola set as mine. Anyway - good luck with printing :-)

Downloads
520
Likes
68
Rating
5
P
PrintablesXatang

QIDI Q1 Pro Lid holder

Cover holder for ventilation when printing TPU or PLA. You will additionally need M3x8 screws for assembly

Downloads
492
Likes
87
Rating
5
P
Printables3Dwork.io

QIDI Q1 Pro Activated Carbon Box

The original QIDI activated carbon box keep a lot of space where the heat from the internal chamber will enter to electronics chamber… with this mod we reduce this negative air flow and increase the amount of activated carbon to filter air.

Downloads
447
Likes
76
Rating
4.5
P
PrintablesDesignWeaver

Qidi Q1 Pro Lid Spacer

I designed this lid spacer to ventilate the chamber while printing PLA, instead of fully removing the lid as recommended by Qidi. This allows me to maintain a cover that prevents dust and debris from entering the chamber. These spacers…

Downloads
437
Likes
55
Rating
4.67
P
PrintablesMonkey47

QIDI Q1 Pro Führung PTFE-Tube

Bei meinem Q1 Pro ist der PTFE-Tube hinten an der Schleppkette hängen geblieben wenn der Extruder von rechts hinten nach vorne gefahren ist und hat dabei das erste Glied der Schleppkette aufgebogen. Um das zu verhindern, habe ich eine…

Downloads
436
Likes
48
Rating
5
P
Printablesbjw-s

Beelink EQ12 1U 19" rack mount

I've created a remix which allows me to rack mount my Beelink EQ12 mini-pc.

Downloads
413
Likes
29
Rating
5
P
PrintablesHyperPrints

Qidi Q1 Pro LED light halo

Say hello to the brightest LED upgrade for your Q1. Pick up some 8mm wide 24v LED strip LED's ( for example ) , print the parts, install and 2 wires later, you are blinded. I printed in PC-ABS blend to handle the constant chamber heat.…

Downloads
406
Likes
90
Rating
5
P
PrintablesSpeedy

QIDI Q1 Pro Simply ventilation

- Simple ventilation when printing, e.g. PLA, etc. - Filament overheating protection. - The lid rises by 100mm. - Use a piece of filament to connect part. - Attached with Double-sided adhesive tape. - When folded, the holder is clicked…

Downloads
402
Likes
77
Rating
5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro, X Plus/Max 3 Carbon Box/Air Scrubber

-- Change Log: 2024-06-02- Improved filter locking tabs. It's more practical to remove and install filters. -- This is an easy to use air scrubber designed for the Qidi Q1 Pro and X plus 3. It just uses the stock Qidi chamber fan. (I'm…

Downloads
401
Likes
119
Rating
5
P
Printablesmuitxer

Arzopa Q1 Monitor - VESA Adaptor

This adaptor can hold an Arzopa Q1 monitor in a VESA arm or stand. Designed to click in and out from the top, allowing its removal by pressing on the top notches. - Use M4 screws. Maximum 10mm, I used 8mm. - Printed with supports on the…

Downloads
392
Likes
50
Rating
5
P
PrintablesMick

Wall mount Asus bq16

wall mount for model ASUS ZenWiFi BQ16 24-10-2025 Now with a high model

Downloads
388
Likes
11
Rating
0
P
Printablesjrice128

Tool Rack for Qidi X-Plus 3 / X-Max 3 / X-Smart 3 / Q1 Pro

A basic storage rack for the tools that came with your Qidi Tech printer, along with other tools I find I use regularly. Made for the X-Plus 3, but fits the accessories included in the X-Max 3, X-Smart 3, and (likely) the Q1 Pro. Keeps…

Downloads
388
Likes
47
Rating
4.6
P
PrintablesKyle Martin

Encoder Knob and Insert for Keychron Q1 Volume Knob Upgrade

Knob should fit on any EC11 encoder with a splined shaft. STEP files of the plain knob is available if you need to modify it to fit your encoder. I printed mine in TPU because that was the only matching color I had on hand, but should…

Downloads
385
Likes
28
Rating
5
P
PrintablesJesseCrash

Qidi Q1 Pro Filament Cutter ECAS

I made this remix before learning about Kamsy's. The primary difference is the “body_bottom” on this design accepts a Bowden tube for an optimal alignment to the extruder and it is also rounded to match the top. The tolerances are…

Downloads
381
Likes
65
Rating
4
P
PrintablesObelisk89

Qidi Q1 Pro - Mount for the Nevermore V6

In order to improve the Qidi Q1 Pro handling of Volatile Organic Compounds (VOCs), a chamber circulation fan which doesn't blow out the air, makes sense. Since the Nevermore is a beloved air filter for this use, I designed a mount that…

Downloads
375
Likes
78
Rating
5
P
Printablesalanze

Qidi Q1 PRO tool holder remix

Fits all the tools that come with my qidi printer.

Downloads
373
Likes
59
Rating
5
P
PrintablesRedShark

Qidi Q1 Pro - top spacer with dovetail (no gluing necessary)

The spacer prevents the PTFE tube from scratching the cover. However, as all the spacers I found were made of four individual parts or had to be glued, I created a version where you can attach two parts together with a dovetail and also…

Downloads
369
Likes
35
Rating
3.75
P
Printablesmmaciocia

QIDI Q1 Pro, Perspex lid support

I am a lazy person, so, needed a thing to lift Q1 Pro Perspex lid when printing where heated chamber is not needed. It works well. Use when printing with likes of PLA.

Downloads
368
Likes
46
Rating
5
P
Printablesmmaciocia

QIDI Q1 Pro - vertical spool holder alternate design of top element to guide filament

I found that the QIDI design caused jamming issues and there was a need for a filament guide. This is my attempt, set to accept a 19.75mm Bowden fitting that I had from my other 3d printer. Included as a OBJ file as it is better to export…

Downloads
367
Likes
31
Rating
5
P
PrintablesEvgenius

Back cover Qidi Q1 PRO V2

Это исправленная версия с вырезом для того чтобы не уменьшалась область печати по оси Y! Кастомная крышка для печатающей головы Qidi Q1 PRO. В задней стенке я сделал вырез для вентилятора 30х30х10мм. Учтите что мне пришлось немного…

Downloads
366
Likes
60
Rating
5
P
PrintablesHyperPrints

Qidi Q1 Pro Electronics Divider

I've insulated my printer and found that the electronics area compromised the heated chamber. This divider will help to separate the electronics from the chamber air. Will not make it air-tight, but add a blockage to the convection path.

Downloads
362
Likes
79
Rating
4.33
P
PrintablesJohn

QIDI Q1 Pro Top Lid Riser

Some of the parts I found for risers that keep the PTFE tube from hitting the top clear lid just didn't quite fit properly (example: https://www.printables.com/model/823998-qidi-q1-pro-lid-riser), so I just remeasured things and created…

Downloads
358
Likes
34
Rating
3.25
P
PrintablesRedShark

Qidi Q1 pro feets

Since my Q1 pro is on a server rack which has a fan in the top that blows air outwards. As the distance between the server enclosure and the Q1 pro was too small, I thought about designing new feet. As it was unfortunately not possible to…

Downloads
356
Likes
89
Rating
0
P
PrintablesИлья Т

Qidi Q1 PRO TOOLHEAD

Мне решительно не нравится подход с составными крышками головы у QIDI Q1 PRO и я решил совместить все в одно целое, попутно снизив массу где это только возможно. ДЛЯ КУЛЕРОВ SUNON! Впрочем, я прикладываю STEP, так что желающие смогут…

Downloads
345
Likes
58
Rating
0
P
PrintablesXatang

QIDI Q1 Pro Spool holder for riser

A spool holder for printing with soft plastics. It attaches to the riser and can be easily detached and disassembled for compact storage. Two bearings 608 will be required for assembly.

Downloads
339
Likes
70
Rating
5
P
PrintablesCoordSpace

Qidi Q1 Pro Heated Chamber & Electronics Bay Vent

This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…

Downloads
331
Likes
58
Rating
5
P
Printablesdta.teks

HULA QIDI Q2 & Q1 - Perfect Fit Center Core

HULA Center Core - Modern and Perfect fit for QIDI Q2 & Q1, no need remove original feet!

Downloads
330
Likes
54
Rating
5
P
PrintablesJeffery Strahan

Qidi Q1 Pro Filament Cutter 2

The Qidi Q1 Pro SLYCR2 filament cutter for the Qidi Q1 Pro. This version the body is a one piece slimmer design. No need for supports, I have easy to remove supports built into the model. Just simply twist the support and they come right…

Downloads
317
Likes
56
Rating
3.5
P
PrintablesHroft

Qidi Q1pro -the handle on the door (Two options)

Дверная ручка, для крепления ничего не требуется. Печатается с поддержкой, я сделал 100% заполнение при печати пет.

Downloads
312
Likes
21
Rating
5
P
Printablesaeropic

BTT/BIQU microprobe on QIDI Q1 pro

This is : a support for BIQU/BTT microprobe to adapt it on the QIDI Q1 pro. a description how to install it on the printer a description of the modifications in the printer.cfg and gcode_macro.cfg files The QIDI levelling system works…

Downloads
305
Likes
52
Rating
5
P
PrintablesJeffery Strahan

Qidi Q1 Pro Filament Cutter Activator

This is designed to activator the manual filament cutter and mount the switch for the 3dChameleon. It can also be used to activate the manual cutter using gcode and not use the 3dChameleon. Orca Slicer Setup Click on the printer settings…

Downloads
297
Likes
80
Rating
5
P
PrintablesMarek Wojnowski

QiDi Q1 Pro door handle

This is a door handle for the QiDi Q1 Pro printer, which is known because of a missing handle. So why to complain? Better let's print our own :-) This one is quite comfortable IMO but also quite visible at front of the printer. Use any…

Downloads
295
Likes
55
Rating
5
P
Printableslunar100com

Qidi Q1 Pro TPU spool holder

I needed to print something with TPU, but the QIDI Q1 Pro can only "eat" it directly into the extruder (it usually jams in the PTFE tube). I checked out several spool holder designs, but most of them were either too complicated or, from…

Downloads
286
Likes
41
Rating
5
P
PrintablesNob3

Simple design door handle for QIDI Q1 Pro

QIDI Q1 Pro用のドアハンドルです。 @シンプルなデザインですが、日常使いしやすく、手になじみやすい作りになっております。 @取り付けはドア中央に両面テープで貼り付けて下さい。

Downloads
282
Likes
34
Rating
0
P
PrintablesTenthrow

KeyChron Q1 Q2 Q3 Knob Q series

This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…

Downloads
280
Likes
25
Rating
5
P
PrintablesMourakami

Qidi Q1 Pro - Feet TPU

The same model but made in TPU. No need foam rubber pads.

Downloads
276
Likes
30
Rating
5
P
PrintablesFumez

Qidi Q1 Pro Internal Exhaust Shroud

Credits to ElectraFlarefire for the original model. I noticed that, after slicing, the wall between the mounting holes and side walls of the original model was too thin and could possibly deform so I made the sides a little thicker. It…

Downloads
274
Likes
35
Rating
4.67
P
PrintablesAlvomane

Xiaomi Aqara Motion Sensor print-in-place tilt and swivel wall mount | Xiaomi Aqara RTCGQ11LM Bewegungsmelder print-in-place schwenk- und drehbare Wandhalterung

EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…

Downloads
273
Likes
53
Rating
5
P
PrintablesHHobbyist

QIDI Q1 Pro Clip-On Door Handle

After struggling with the door on the q1 pro for many months, I finally decided to add a handle. I didn't want to drill any holes and I didn't have any suitable adhesive on hand, so I designed a handle that clips through the gap between…

Downloads
266
Likes
29
Rating
5
P
Printablesmrsheikh

Qidi Q1 Pro Improved Visibility Duct - Remix

An improved and refined version of the original design by Chaz. I used the 360° part cooler duct by 8jack as a reference for better tolerances and making it easier to print the duct. I also added a bump to “lock” it into place via the fan…

Downloads
257
Likes
46
Rating
5
P
PrintablesChaz

Qidi Q1 Pro Improved Visbility + Airflow Duct!

An improved Qidi Q1 Pro duct that has better nozzle visibility and (with my testing) better airflow due to its split airflow design! You must print this out of ABS, ASA or PA6/12-CF for the best results. PETG will most likely have issues…

Downloads
249
Likes
51
Rating
4.5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Rear PTFE Port Cover

The PTFE port cover is for users who switched to front loading and would like to keep the heat in. Print out of TPU, since it must be flexible to snap into place. Related Models: Qidi Q1 Pro Exhaust Port Cover…

Downloads
236
Likes
28
Rating
0
P
Printablesp_fabi

Qidi Q1 Pro simple door holder for low temp printing - PLA, TPU, PETG

I didn't like the fact that the door felt a bit flimsy when opened, so I made this simple part. It requires 2 x small magnets. I used 5x3mm magnets, but you can change parameters of those in project files. Step and Fusion files provided.…

Downloads
227
Likes
36
Rating
5
P
PrintablesMarek Wojnowski

Rails for an upper cover of QiDi Q1 Pro (when printing in PLA)

If you print in PLA probably you want to take off a sprinter upper cover. I have designed simple rails to put that cover into. In my opinion it looks well and is quite usefull. Goog luck :-)

Downloads
225
Likes
53
Rating
5
P
Printablesmindfest

QIDI Q1 pro rear mount 60mm air hose adapter

Adapter to use a 60mm air hose for rear mount. You can use longer wood screws to use the original thread. I can also provide the parametric fusion file, if you are interested. I would suggest to use PETG or similar. V1.1 Added a gasket…

Downloads
224
Likes
44
Rating
0
P
PrintablesTim

QIDI Q1 Pro - Top-Mounted Spool Holder (No Supports)

A clean, support-free top spool mount for the QIDI Q1 Pro, designed for smoother filament pathing and easy printing. The spool sits slightly farther back so filament feeds closer to the gantry center, and the holder is a bit taller to…

Downloads
223
Likes
36
Rating
5
P
PrintablesJeffery Strahan

Qidi Q1 Pro Bed Knob

Qidi Q1 Pro bed leveling tension knob. Every inside tick is 2 minutes. Every outside tick is 2 minutes. Total of 60 minutes. Has access for a nut driver to loosen and tighten the lock nut. I also find it easier to change the…

Downloads
219
Likes
31
Rating
5
P
PrintablesCarol8

QIDI Q1 Pro Belt Tensioner

I remixed the mount to fit on the Q1 pro (I shortened it by 8mm and tightened the holes a bit). For easier remixing, I included a .step file for the mount. Hardware required (per mount): 1 x M4 x 30mm screw (for the tensioning mechanism;…

Downloads
218
Likes
42
Rating
5
P
PrintablesAndrian

QIDI Q1 Pro Keep your filament dry during printing - Internal Spool Holder

This spool holder allows you to store the filament inside the printer , between the door and the print plate , making efficient use of the available space. This setup is ideal for hygroscopic materials , which quickly absorb moisture.…

Downloads
214
Likes
65
Rating
4
P
Printablesrio

Qidi Q1 pro backpanel ventilation V2

The stock ventilation layout is random. To improve upon it you can remove ventilation grids or cut larger openings. Install these gadgets to improve overall airflow for the electronics. All designed to be printed without support -…

Downloads
214
Likes
54
Rating
5
P
PrintablesEvgenius

Qidi Q1 Pro Fan duct Auxiliary Cooling Fan (12032 fan)

Воздуховод для бокового вентилятора Qidi Q1 Pro. Я случайно сломал лопасти на родном вентиляторе и мне не удалось снять родной воздуховод. Я спроектировал свою модель и готов поделиться ей с вами. Я так-же загрузил файл для SolidWorks.…

Downloads
212
Likes
41
Rating
5
P
Printablesbud1776

Qidi Q1 Pro spool holder

Makes 1kg spools line up perfectly, and small spools line up much better. You don't need the extra PTFE tube now, and it will be a little better for flexibles since it's more direct (less drag). The only downside is that you need some…

Downloads
212
Likes
22
Rating
5
P
Printablesbitmap317

Spool retaining ring for Qidi Q1 Pro

My filament spool fell off a couple times due to bouncing during rapid moves while printing. I threw together this simple ring that fits on to the holder arm to provide more lip to keep the spool secured. It's outside the box so PLA is…

Downloads
210
Likes
17
Rating
5
P
PrintablesJasonWorkshop

Q1 nipper holder

Recently, I needed to organize many nippers on my desk. However, conventional holder make the tips of the nipper face upwards, which I think is not safely. Therefore, I came up with the idea of designing a simple and beautiful nipper…

Downloads
209
Likes
37
Rating
5
P
Printablesmrsheikh

Qidi Q1 Pro - Custom Toolhead Front Cover and Cooling Duct

A better and more balanced part cooling duct for the Qidi Q1 Pro. This one is custom designed and will NOT work with the stock probe unless it is relocated. Check out the probe relocation mount by Mi3 . I've designed this around having a…

Downloads
205
Likes
47
Rating
5
P
Printablesdeyavi

Aqara door sensor case (MCCGQ11LM)

I designed this case in Fusion 360 for an Aqara door sensor mainly to use it for projects where I use this sensor as a general purpose zigbee sensor and I prefer something a bit smaller. There are 2 versions, one with a hole and one…

Downloads
202
Likes
16
Rating
0
P
PrintablesSethR1223

Toyota Key Fob HYQ14FBW - Replacement Case - MULTIPLE VERSIONS

Full disclosure: I set out to make a more compact version of the HYQ14FBW Toyota key fob for my 2024 Corolla Cross Hybrid, but by the time I modeled in the ability to hold the valet key ("Full Size"), it's not too far from the original…

Downloads
201
Likes
16
Rating
5
P
Printablesmindfest
Downloads
197
Likes
37
Rating
5
P
Printables1katkov

Carbon Filter for Qidi Q1 pro VS smell ABS - Угольный фильтр для удаления запаха АБС

Описание на РУССКОМ языке - ниже Carbon filter for Qidi Q1 Pro VS disgusting smell of ABS If you print ABS at home, you know that ABS smells really bad. All decisions this trouble are very difficult or expensive that I saw. I can't make a…

Downloads
195
Likes
22
Rating
5
P
PrintableslanderH

qidi q1 pro rev2 & rev 3 spool holder with ptfe

i was tired from the old flimsy spool holder from qidi and thought no more. i was looking online for spool holders for qidi q1 pro rev2 and found very little to no good options and decided to make my own. i found some spool holders online…

Downloads
195
Likes
15
Rating
4.8
P
Printablesrostrovsky

QIDI Q1 Pro bowden tube retainer

Prevents bowden tube going behind drag chain. Fixes the problem originally described in https://www.reddit.com/r/QIDI/comments/1e6gflq/ptf Best to be printed in ABS/ASA

Downloads
190
Likes
23
Rating
0

Qidi Q1 Pro, nettoyage buse ( + robuste) Nozzle cleaner

Pièces de replacement pour le système de nettoyage de buse de la Qidi Q1 Pro. Le mien ayant cassé (pas étonnant). Assemblage testé au niveau montage et fonctionnement à vide, mais pas essayé sur la machine encore pour le moment. Le…

Downloads
188
Likes
42
Rating
0