Search results: rack

Sort order

36,058 models

P
PrintablesRepkord

RepRack: Open Source Spool Holder And Storage System by Repkord

REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22,834
Likes
7,090
Rating
4.97
P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant

Downloads
16,512
Likes
4,050
Rating
4.93
P
PrintablesMichal Fanta

Extended Set of Wooden Train Track with 50+ Unique Pieces

See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
15,206
Likes
6,192
Rating
4.67
P
PrintablesVC Design

Ultra Strong Corner Bracket - 5 Variations ( Parametric )

5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant

Downloads
7,751
Likes
3,047
Rating
4.93
P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesNautilus Forge

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
4,274
Likes
1,071
Rating
5
P
PrintablesVC Design

Strong Corner Bracket

The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
3,669
Likes
1,725
Rating
5
P
PrintablesDJ

Phone holder/bracket for monitor

GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
3,366
Likes
1,801
Rating
5
P
PrintablesBTR3D

Filament Rack

An elegant filament rack for your filaments. Except for the 3d parts, all you need is a 15mm aluminum tube and glue. I'm attaching an example product link to the tube I'm talking about. I used 50 cm long, but a little longer or shorter…

Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant

Downloads
2,898
Likes
772
Rating
5
P
PrintablesART TOO

RACK HOLDER - POLE HOLDER (Parametric)

Perfect for making a rack for your clothes or fillament roles Further scalable in the slicer

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
2,221
Likes
1,537
Rating
4.83
P
Printablesbuchnema

Walnut-shaped Nutcracker

Many 3D-printed nutcrackers are bulky, rectangular, or visually utilitarian, often consuming far more filament than necessary. I wanted a compact design that looks good even when left out in a bowl of walnuts in the living room, without…

Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant

Downloads
2,172
Likes
730
Rating
4.65
P
PrintablesAvvarshn

2020 Profile Corner Bracket

Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
2,091
Likes
259
Rating
4.94
P
Printablesdtoux

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
1,993
Likes
291
Rating
5
P
PrintablesCelta

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
1,700
Likes
628
Rating
4.93
P
PrintablesHappyAtom

Electrical Bracket for Drywall | Old Work Low-Voltage Box | 1-Gang

If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,570
Likes
248
Rating
4.89
P
PrintablesMehTechArt

Heavy-Duty Reinforced Corner Brackets

Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,566
Likes
805
Rating
5
P
Printablesmaxelman

Flexible Train Track / Rails for Wooden trains

Bendy train track for non-standard curves

Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant

Downloads
1,525
Likes
219
Rating
5
P
PrintablesLayers Studio

Stackable Filament Rack

Here is a simple printable spool rack. Can be adapted for any number of spools. The rack can be stacked for a low footprint storage solution. 20mm wooden dowel used for the spool storage rack. Update: 12.01.22 New version added with 22mm…

Print approx. €11.31–€13.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,430
Likes
262
Rating
5
P
PrintablesAdudino

Nutcracker - Hazelnut Walnut Nut Cracker

Timeless model of a nutcracker which is highly optimized to crack walnuts and hazelnuts. Especially hazelnuts are hard to crack - the special geometry places the nut slighty off-center below the piston which makes a perfect crack. Print…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant

Downloads
1,343
Likes
376
Rating
4.85
P
PrintablesoXiVanisher

Small mechanical wound tracker / counter

A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
1,300
Likes
115
Rating
4.91
P
PrintablesMike
18+

The source marked this model as adult content.

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
1,294
Likes
102
Rating
5
P
PrintablesJKM

PrusaCoreOne adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,292
Likes
25
Rating
0
P
PrintablesTijnoz

Unifi AP AC-LR mounting bracket

Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…

Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant

Downloads
1,190
Likes
66
Rating
5
P
PrintablesRepkord

RackStand / RepWinder Stand for RepBox 2.3.1+ and RepRack System

RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,117
Likes
241
Rating
4.78
P
PrintablesAlgernon

Airbrush stencil ST-TX001-cracked-wall-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
225
Rating
5
P
PrintablesKalleKnall

MK3 PSU Bracket / Brace

Just an other Prusa MK3 PSU-Bracket / Brace. My Frame has a Skew-Value of 0.01 ! (Support Menue) Please have a look on my other Prusa MK3 Prints https://www.prusaprinters.org/social/1247/prints It fit's between Mainframe and Rearplate,…

Print approx. €10.38–€12.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,112
Likes
132
Rating
4.7
P
PrintablesMattHecht

Hot Wheels Track Connector

Basic track connector for hot wheels track

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
1,075
Likes
99
Rating
5
P
PrintablesJasonLang

CalDigit TS4 Bracket

Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…

Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant

Downloads
1,057
Likes
96
Rating
4.88
P
PrintablesJKM

PrusaXL adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,038
Likes
13
Rating
0
P
Printablesmhparsons

Modular Wine Rack

This is a modular wine rack system that can be assembled to create many different configurations. I have included a number of different configurations in the photos section, but don't let that constrain you. This system can be expanded…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
965
Likes
590
Rating
4.86
P
PrintablesMatt Boyer

Wall Bracket for Dewalt Stick Vacuum

My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…

Print approx. €5.72–€7.00 excl. taxPreliminary estimate for one variant

Downloads
958
Likes
134
Rating
5
P
PrintablesMartinRowan

ZimaBoard Modular 1U Rack

Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
924
Likes
164
Rating
4.8
P
PrintablesCarter

Anti-Wobble Z axis bracket with Floating Driveshaft Bearing

Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
911
Likes
102
Rating
5
P
PrintablesEd

TRX4M Modular track part 2

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant

Downloads
903
Likes
119
Rating
5
P
Printablescopper

Train Tracks

A small collection of tracks I modeled as a present. They should fit an Thomas the Tank engine track set but I've only tested it on one. Includes: 1 straight section 1 flex section 2 three way forks 1 intersection Print instructions For…

Print approx. €8.53–€10.43 excl. taxPreliminary estimate for one variant

Downloads
879
Likes
168
Rating
5
P
PrintablesCrooksUSA

Anycubic Photon Mono X 6Ks Resin Drip Bracket

UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
879
Likes
64
Rating
5
P
PrintablesPatrick

Spell Slot Tracker • TTRPG • Dungeons and Dragons • Spell Counters DE and EN

With thse Spell Slot Trackers you have the number of open spell slots for your caster always in sight. One d6 dice per spell slot level is used to keep track of the number of open slots. This version "Half Caster" has dice slots for spell…

Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant

Downloads
852
Likes
156
Rating
4.67
P
PrintablesEd

TRX4M Modular track part 4

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
844
Likes
108
Rating
5
P
Printablesbuchnema

Wall Bracket for Dyson Casdon Toy Vacuum

The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
818
Likes
86
Rating
5
P
PrintablesAltair

TP-Link Tapo C200 Bracket

TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.

Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
817
Likes
47
Rating
5
P
PrintablesNautilus Forge

Modular filament spool rack - reversible shelf bracket

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant

Downloads
802
Likes
135
Rating
4.8
P
PrintablesEd

TRX4M Modular track part 5

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Use the rings to space out the planks on a rope between the two ends. You can use two…

Print approx. €3.60–€4.41 excl. taxPreliminary estimate for one variant

Downloads
795
Likes
124
Rating
5
P
Printablescgillstrap

Brio - Mechanical (Geared) Interchange/Switch - O1/P1 Track

Overview Building on a previous design (Brio - Mechanical (Geared) Interchange/Switch - M1 Track) https://www.prusaprinters.org/prints/59955-brio-mechanical-geared-interchangeswitch-m1-track I wanted to see if I could shrink the design…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
771
Likes
173
Rating
4.75
P
PrintablesEd

TRX4M Modular track part 12

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill Support is needed. Watch it in action at

Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant

Downloads
751
Likes
118
Rating
5
P
PrintablesEd

TRX4M Modular track part 6

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. All 3 parts can be connected using the 3 way connector These corner parts are not…

Print approx. €8.54–€10.44 excl. taxPreliminary estimate for one variant

Downloads
736
Likes
99
Rating
5
P
PrintablesAllpa

Gewürzregal (Rondel) für Ankerkraut-Gläser / Spice rack (rondel) for Ankerkraut jars

Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…

Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant

Downloads
720
Likes
118
Rating
4.5
P
PrintablesMichał

Govee Neon LED Bracket

Bracket for Govee Neon LED Strip Light. I've had great results printing without any brims with PLA on Smooth Steel Sheet PEI. Screw hole is small enough that it didn't need any supports.

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
714
Likes
115
Rating
5
P
Printablesdziobu

LEGO Duplo Train track: ramp (+v2)

Easy to print, tought and compact construction. Without supports (v1). v2: fixed Category: Construction Toys

Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant

Downloads
703
Likes
122
Rating
4.94
P
PrintablesEd

TRX4M Modular track part 9

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant

Downloads
677
Likes
91
Rating
5
P
PrintablesJordi

Modular 10 inch rack 2U ITX case + storage mount

I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…

Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant

Downloads
660
Likes
173
Rating
5
P
Printablesbsfiosco

UAD-2 Satellite 1U Rack Mount

I designed this rack mount bracket so that I could install my two UAD-2 Satellite Thunderbolt units in my studio's rack mount cabinet. While Universal Audio does not make a rack mount bracket for these units there are unused screws on…

Print approx. €4.73–€5.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
651
Likes
15
Rating
5
P
PrintablesEd

TRX4M Modular track part 11

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill Support is needed. Watch it in action at

Print approx. €12.67–€15.48 excl. taxPreliminary estimate for one variant

Downloads
646
Likes
102
Rating
5
P
Printables3DMN

Hyte Y60 Fan Bracket (3x120)

Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
637
Likes
12
Rating
0
P
Printablesquickvibes

Spice rack for 4oz square spice jars

small 3x4 spice rack for cupboard organization. Uses 4oz square spice jars https://www.amazon.ca/gp/product/B077T2252Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Print instructions PLA works fine pirnt at .30mm for quicker print.…

Print approx. €9.83–€12.02 excl. taxPreliminary estimate for one variant

Downloads
620
Likes
112
Rating
5
P
PrintablesEd

TRX4M Modular track part 10

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant

Downloads
614
Likes
80
Rating
5
P
PrintablesRylie Pavlik

90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable)

While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
613
Likes
67
Rating
5
P
PrintablesEd

TRX4M Modular track part 7

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant

Downloads
606
Likes
86
Rating
5
P
PrintablesCaptainAl

Mikrotik RB5009UG - 10 inch or 19inch rackmount kit

an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
572
Likes
30
Rating
2.75
P
PrintablesEd

TRX4M Modular track part 3

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
562
Likes
78
Rating
5
P
PrintablesEd

TRX4M Modular track part 8

Create your own 1/18th scale crawler track with these interconnecting track parts. Printed with 0.3 layer height on Mk3s 10 % infill No support needed. Watch it in action at

Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant

Downloads
549
Likes
74
Rating
4.67
P
PrintablesD2mian

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
540
Likes
18
Rating
5
P
PrintablesTrashBoat

Prusa i3 MK3 Led Strip bracket (5050)

This is a 200mm long bracket to hold a 10mm wide 5050 led strip on the frame of the Original Prusa i3 MK3/S. Remixed from https://www.thingiverse.com/thing:3034514 by nrp Print instructions I printed it at 0.3mm with supports and brim to…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
534
Likes
43
Rating
3.75
P
PrintablesFormFitPrint

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Print approx. €9.15–€11.18 excl. taxPreliminary estimate for one variant

Downloads
522
Likes
165
Rating
5
P
Printables.STL

Vertical Universal Gun Rack- 2 parts, 3 Screws. 100% effective.

Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…

Print approx. €9.15–€11.19 excl. taxPreliminary estimate for one variant

Downloads
518
Likes
65
Rating
5
P
PrintablesFSL

FSL-Abrams tank track bracelet

Comfortable and sturdy Abrams tank track bracelet made for tank fans. Has easy clip fastening. Assembly: Cut filament in right lenght (about 15 mm) and gently insert with aligned another track element. Pohodlný a pevný náramek ze článků…

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
499
Likes
204
Rating
3

Tobii Eyetracker 5 Curved Monitor Mount 1800R - Samsung Odyssey OLED G9 G93SC G95SC

UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
483
Likes
26
Rating
5
P
Printableswizhack

Gridfinity Stripper pliers rack fit for drawers

This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…

Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant

Downloads
468
Likes
63
Rating
4.82
P
PrintablesMichal Fanta

Crossing Track - H1

Double-sided crossing track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight…

Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant

Downloads
467
Likes
71
Rating
5
P
Printables3D-Print Brehm

PRUSAMENT Filament-Regal - Filament-Rack

Für meine PRUSAMENT Filament Rollen, habe ich dieses Regal entwickelt. Für die beste Druckqualität (0,2 mm) muss man leider viel (Druck-)Zeit haben, die sich jedoch sehr lohnt. Druckt man die Teile im 0,3 mm Draft-Modus, werden die…

Print approx. €13.91–€17.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
466
Likes
124
Rating
0

Domino / Tile / Rummikub Rack Scalable 🁴

100% scale pictured below, good for scrabble and rummikub

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
440
Likes
82
Rating
4.83
P
PrintablesJakub Kříž

Strong Corner Brackets - multiple variants and sizes, easy to print and free

Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
433
Likes
193
Rating
5
P
PrintablesFloKun

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
414
Likes
41
Rating
5
P
PrintablesAdam Kimmerly

Arrow Shaft Yagi Antenna Bracket

This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
409
Likes
45
Rating
0
P
PrintablesNicuradse

Regalwinkel / Angle Bracket for Shelf

Metal rods for board in cabinet wern´t enough to support weight. So I designed some brackets with to holes to screw them in place. When I uploade the model I realized there were already some similar models so I added this my model as a…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
403
Likes
38
Rating
4.67
P
PrintablesFlow

10th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…

Print approx. €3.14–€3.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
403
Likes
30
Rating
5
P
PrintablesCelta

Wobble-Free Shelf Brackets

Brought home a bargain shelf, only to find it's a bit wobbly? Don't fret! These 3D-printed brackets are your wobble-busting heroes! This design features both left and right brackets , each securing the shelf with 4 screws (2 vertical, 2…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
389
Likes
309
Rating
0
P
PrintablesFlow

8th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…

Print approx. €3.10–€3.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
381
Likes
37
Rating
5
P
PrintablesMechLink

Intex Ultra XTR Frame leg bracket

I needed a bracket to hold some of my pool stuff to the frame and this is what I came up with. I also have the holder for the valves for the pump and such too. It needs to be printed in PETG, ABS, or ASA (for UV protection) I tested PLA…

Print approx. €2.73–€3.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
376
Likes
65
Rating
5
P
PrintablesD4rk Helmet

HP Elitedesk to 10 inch rack adapter

You need the Bracket and 4xM4 screws

Print approx. €4.37–€5.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
373
Likes
45
Rating
0
P
PrintablesMoss Ed

Starlink Gen3 Router Bracket

Bracket for mounting a Starlink Gen 3 router

Print approx. €3.32–€4.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
361
Likes
30
Rating
0

PCI/PCIe card support bracket

Bracket designed to support heavy PCIe or PCI cards when using them in a bare motherboard on the desktop. Modern cards seem to use a bit thinner metal, the dimensioning of the slots is a balance between too tight fit on older PCI cards…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
348
Likes
57
Rating
5
P
Printablesdjedje_zr7

Twin Slot Shelving Bracket

Addon for twin slot shelving sracket to hold what you want (hover part,bags,...) Print the base and the required module : fork, unicor or triceratops.

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
344
Likes
75
Rating
5
P
PrintablesMrViddy

Benchy Shelf Display Rack Holder

Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
84
Rating
4.25
P
PrintablesCarter

Flipable Bracket for Prusa I3 and Pi Cases

Flipable. Cases friction fit and can face either direction. Print instructions prints in ABS, .2mm layers no supports

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
324
Likes
58
Rating
4.81
P
PrintablesGCV3D

Party Cracker (fun party favor!)

Overview These party crackers are a fun way to give guests party favors, decorate place settings, and are sure to make any party memorable! Not only is there plenty of space inside to hold candy and small toys, but there's an added twist…

Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant

Downloads
324
Likes
247
Rating
4.33
P
PrintablesSaddamCZ

Drum rack headphone hook (multiple versions)

A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…

Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant

Downloads
315
Likes
54
Rating
5
P
PrintablesDenver

Wall shoe rack / holder for Command Strips

Thanks for the original model goes to @SickSadWorld_260233 This printed well for me in PETG at .20mm and 25% infill.

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
309
Likes
81
Rating
5
P
Printablescrashkg

Festool Track to Dewalt Trim router

You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
303
Likes
48
Rating
0
P
Printablesno pulse

Snoopy Coaster and Rack

This Snoopy print is for personal use. These were made on a Prusa MK3, I've included the g-code file and the stl files. designed in corel draw & FreeCAD, love using the prusa slicer. Used Matter Hacker pla filament, print the black first…

Print approx. €0.99–€1.20 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
38
Rating
5
P
PrintablesDr White

Classical Passive Filament Tracker

🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…

Print approx. €2.19–€2.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
292
Likes
144
Rating
4
P
PrintablesPotatoFi

Macintosh BlueSCSI 1.0 Bracket

This 3D printed bracket is designed to mount a BlueSCSI in the 3.5" hard drive bay in vintage Macintosh computers. The BlueSCSI slides into the hold-downs near the SCSI connector, firmly snaps into place on the back, and is optionally…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
291
Likes
13
Rating
5
P
PrintablesDn3d

H0 Tunnel portal 2-track similar Noch Profi/ H0 Tunnelportal 2-gleisig ähnlich wie Noch Profi

English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…

Print approx. €5.48–€6.70 excl. taxPreliminary estimate for one variant

Downloads
287
Likes
14
Rating
5
P
PrintablesJellyTitan

Xiaomi Aqara square Temperature and humidity Sensor Bracket for screw or zip-tie

Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
279
Likes
59
Rating
5

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack

I turn a lot of pens and use Micro-Mesh sanding pads to polish them when finished. I wanted a nice rack to hold the pads, and I think I went a little overboard with my design. This rack is fully skeletonized with a honeycomb pattern to…

Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant

Downloads
273
Likes
89
Rating
5
P

Bear Tracks - Make realistic looking prints

Make Grizzly Bear Tracks You can use this model grizzly bear paw print for realistic footprints for education, learning about animal sign or for pranks. This is designed to make life-like tracks in sand, snow or mud and left and right…

Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
65
Rating
0
P
Printablesalexmoras

Protectli FW4B Server 1U Mount for 19-inch and 10-inch Racks

Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…

Print approx. €8.18–€10.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
267
Likes
27
Rating
5
P
PrintablesLensrentals.com

Blackmagic Micro Converter Bracket

The Blackmagic converter box itself has no means of mounting, so we made a custom bracket that allows you to mount the converter with either male or female 1/4-20" threads. As an added bonus the bracket protects it from drops as well.

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
263
Likes
49
Rating
0
P
PrintablesBram

Badminton racket holder (2pcs)

Remixed version of Ravi's model to hang two rackets instead of five. Added an additional hole to center mount on a unused hook.

Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
28
Rating
5
P
PrintablesNinjaChurch

Nail Polish Rack (Holo Taco)

I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.

Print approx. €15.94–€19.49 excl. taxPreliminary estimate for one variant

Downloads
254
Likes
56
Rating
5
P
PrintablesStuggi

Gridfinity Nippers Pliers Strippers Rack 2x2

A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
33
Rating
5