20,660 models
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
replique du ballon d'or football en 10 cm personnellement je l'ai print en 23
You can put them on the handlebars in the normal position and turn the bicycle afterwards. They are designed for the handlebar with a diameter of 23 mm . I printed them with 4 perimeters, 15% honeycomb infill, without top and bottom…
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
Compliant mechanism clips and clamps for use or replacement in different projects. The clip will hold things like cables, pens, tools and many others you want to have attached. Changelog 2024-12-21 v1.6 fine tuned print settings for…
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
Swan, with a small support built in to hold the nose without any extra supports needed
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
This topographical based 3D model has the shape of the The Czech Republic. How to do it? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
Optional addition to RepRack , default configuration comes standard on all RepBoxes v2.3.1 and up . The slip rod allows for much more lubricity than just trying to pull a filament spool on a piece of pipe alone. In addition the ribbed…
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Replica of Gandalf's sword Glamdring featured in the LOTR movies. This is a work in progress. As of initial publication some things are still missing or represented in simplified ways. The runes on the chamfered part of the hilt are not…
Optimized for Prusa MINI+ (18x18cm) No supports No other parts needed
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
PLEASE BE SURE TO LOOK AT THE READ ME FIRST FILES BEFORE PRINTING FOR IMPORTANT NOTES! Print your own set of parts for RepBox v2.5 and truly make it your own! Includes STLs and gcode for full part set and a separate set for the slip rod…
V2.0 is available here, the model you are currently seeing is outdated This keycap puller is a V1.0 replica of the Apex 9/Pro. It is a replacement if lost, broken and is compatible with any keyboard . It allows easy and safe removal of…
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…
Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…
Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
A simple mat to help you organize your parts while repairing.
Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Quick repair of the outer shell of the fitlok, 4 are included in the print just to fast track prototyping. Remove as needed. I printed at 105% and it was a snug fit. v1 lasted from Nov to May, made a v2, and now that my printer is…
This is a large, useful toolbox for small tools and parts. I use it for repairing my 3D printers because of all the small parts and tools needed. I have several printers that are used a lot. Anyone that really puts their printer to good…
WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…
A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…
An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…
I wasn't happy with the printable versions available out there, so I made my own. This version has stable game pieces that won't shift during play. The design replicates the original game as much as possible without requiring printing…
This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
After some time, my CAME TOP-432NA remote controllers started to fall apart. Since the electronics inside were fine I decided to 3d print a new housing for them. I made 2 versions because I had 2 versions of the controller mainly…
This is a work in progress release of my take on the short sword (dagger) Sting, from the Hobbit and Lord of the Rings. It's overall length is 560mm (22") with a blade of 380mm (15"). As of this release there are no elvish writing on…
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
Es un soporte para reutilizar listones de madera de 1.8m y poder organizar el filamento en casa. He impreso los soportes en la Mk3S con una boquilla de 0.6mm y una altura de capa de 0.4mm en PETG Sunlu
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Flexi toy Patrick Star from the SpongeBob SquarePants cartoon series. It has a movable head. The arms legs and waist (if starfish actually have anything like that). The model is adapted for easy printing with a 0.4mm nozzle with a layer…
You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…
An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…
H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…
Folding puzzle map of the Czech Republic divided into regions. You can adjust the size in PrusaSlicer - I adjusted it to 150%. Later I will add the option as a blind map without names. I see the use in education for children in the first…
In case you broke your tokabo lamp I left you a replacement for the glass part. It will be necessary to remove the retaing tabs as you can see on the picture and the botom part it is holding in place with hot glue. I recomend supports to…
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
It would be nice if you post your make. Thank you
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
This remix is for the standard handle bar diameter size of 22,2 mm. Perfect for working on your bike without scratching your handle bar or your bell. Makes it more stable as well. Print settings: Material: PETG, PLA might be too brittle…
Penrose Tiles are named for their creator, Roger Penrose, a mathematician and physicist. The Penrose Tiling is an infinite aperiodic tiling, meaning the pattern can be tiled over the entire plane (to infinity) but never repeats the exact…
Both rings that support the headphone extension broke due to their flimsy design. The rings flexed and eventually failed under stress. I modeled the dimensions in Fusion 360 and designed a pair of clamp reinforcements. After installing…
This coaster is a perfect choice for every 3D printing nerd. It's easy and fast to print. Feel free to share your own experiences with the community. Design by Jaroslaw Krawczyk found on MyMiniFactory:…
The mounts are designed for handlebars + handlebar tape with a diameter of 40mm and increased ground clearance. I printed whit PETG them with 4 perimeters, 10% honeycomb infill, without top and bottom layers.
This ship appeared in Star Wars: The High Republic: Adventures : Part 2 , where it was identified as a republic medical frigate. It could be a Salvation -class medical frigate (from Light of the Jedi ). In-universe, this ship seems to be…
This jeans button works great. It holds even in a frayed hole, is very stable, and can also be removed again without destruction, for example, for washing. Especially when the original button of a pair of jeans is lost, the hole that…
Model of SAOs Dark Repulsor. Prints on Prusa Mini in 2 halves. I adhered mine with glue, then painted the blade and wrapped the hilt in electrical tape for a neat look.
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…
This is a collection of 3d printable caps to replace the metal ones on a Canon New F1 WARNING: THE PLASTIC PARTS ARE FRAGILE, YOU NEED TO SCREW THEM IN GENTLY WITH THE LARGER TOOL YOU CAN FIT. Otherwise, you'll have to dig plastic out of…
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Spur N Bahnsteig einseitig und zweiseitig
Temple (arm) replecement for oakley jawbreaker glasses oakley-left-arm-temple.stl contains bent temples, so their don't fall of your head oakley-left-arm-temple-flat.stl file contains temples which are not bent, so you can bend them…
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Baseball Patrick from Spongebob Squarepants.
Printed in ABS with 100% infill
MK3S+ and MK3S FS Cover 6mm OD 4MM ID Adapter For PolyBox or RepBox with 6MM Tube (PTFE) based on the Original Prusa MK3S+ and MK3S FS Cover. Note: This GCode is for the MK3S+ the GCode for the MK3S is located under the User Print Files…
EN: The original plastic clip on the Tractive CAT Mini GPS tracker tends to break over time — this model is a direct replacement that snaps right onto your cat's collar just like the original. What's new in version 2: Reinforced mounting…
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
2004-2005 Honda Civic Si EP3 parking brake trim parts. Original parts were a natural color plastic with chrome plating, which wore out. Then the plastic broke. I made these repair parts, and used plastic epoxy to glue the new trim part…
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Right now I'm calling this style “ Relief Topography ” It's easy to print multi-color images on a single-color printer. I started with black and got lighter with each change. There are 3 stops built into the gcode where you can switch to…
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Tired of having to throw away your jeans just because the button is ripping out of the fabric? No spare clothing on your business trips? Your children too enthusiastic in the playground? Went out of control in an all-you-can-eat…
This is a remix between three different styles of Spool Auto Rewinders. There are multiple options for the side brackets depending on your needs/preference. Changes: Updated Shana 's sidebracket.stl to support the slightly larger axle in…
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
A repair "kit" for USB-C plug casing. Depending on how much of the casing is missing, print “USB-C_cable_plug_repair_additional”. If only one side broke of then you can skip “USB-C_cable_plug_repair_additional”. Please also note the…
This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
I made this Battery Thread Cap Replacement after a close friend had a hard time replacing the batteries of her Nikon EM Camera because the piece was stripped . First, I analyzed the design of this cap, especially seen in older cameras,…
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Customizable backpack replacement part, can be personalized with your name using Fusion, easy to print. Note: Make sure the selection filter is set to ‘All’ 20% infill or more PLA or ABS.
Volvano mosquito repeller, special to spend summer afternoons in the garden without mosquitos. The base was redesigned to have a bolt to pin the mosquito repeller. The volvano was rescaled to fit the spiral in the interior. Printed in…
Repair kit for Philips SHP2500 headphones. To print all parts need to add in slicer mirrored part ( full kit in g-code file) Material: PET-G -recomended Layer high: 0,2 or lower Supports needed under the cylidrical parts ( support added…
Plastic clamps in my old Manfrotto tripod became brittle and snapped off. Therefore the tripod was stashed away for a few years. As a natural hoarder I just did not have the willpower to finally throw it away. That is until I got my hands…
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
![V1.0 Universal Keycap Puller [Apex 9/Pro Replica] *V2.0 AVAILABLE*](https://media.printables.com/media/prints/1063837/images/8051042_4dbcd059-28ff-4873-a9ae-ae9c975cb571_2dfe49e3-f5d3-408a-8202-62989a22972f/20241105_191539.jpg)
