Search results: roomba

Sort order

237 models

P
PrintablesMirkoFerronato

Roomborghini Lamborghini Inspired Decorative Top Cover for Roomba - Style Robot Vacuum

Bold Lamborghini-inspired hood lines and vents. Roomborghini Available in two versions: Full model or half STL – for large printers. Split into 4 pieces – for easier printing on smaller build plates. Pre-sliced G-code file included…

Print approx. €8.85–€10.82 excl. taxPreliminary estimate for one variant

Downloads
371
Likes
403
Rating
0
P
PrintablesSarusani

Silent Rear Wheel for iRobot Roomba S9+

I got inspired by the silent front roll (TPU) from nks . This is a remix to fit a Roomba S9+. Print the axis in PLA and the wheel in TPU. Then just replace the original wheel. No additional hardware is needed. Other Roomba models use a…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
74
Rating
4.33
P
Printablesdr.dentz

Roomba ramp - Ramp for vacuum robots

I have some height differences between the rooms in my apartment. Therefore I needed some ramps for my vacuum robot to get from one room to the other. One ramp segment has a height of 2 cm. You can also scale it in your slicer to fit your…

Downloads
1,347
Likes
125
Rating
4.5
P
PrintablesEric W

Roomba Bumper Extension

Roomba robot vacuum bumper extension prevents robot from getting stuck under furniture. Attach with VHB tape to the top of the bumper. Window allows IR sensor to find docking station.

Downloads
696
Likes
66
Rating
5
P
Printablesshawly

Roomba ramp - Ramp for vacuum robots (30mm incl. Fusion360 file)

I converted the Roomba ramp from drdentz for Fusion360 and extended it by 10mm in height for my Bedroom. I also added the F360 file for anyone that wants to modify it. Notes: Printed in 2:33h with a 0.6mm nozzle and a layer height of…

Downloads
674
Likes
24
Rating
5
P
PrintablesLampyDave

Roomba robot vacuum base charging contact holder

The charging contacts on some of the bases for the Roomba robot vacuums seem to be prone to overheating and then the plastic part melts and squishes sideways - then the robot won't charge any more. This is a replacement bit of plastic for…

Downloads
621
Likes
11
Rating
5
P
PrintablesPhil

Voron 2.4 Roomba 800/900 HEPA Filter Box

A proper filter box for using Roomba 800/900 series HEPA filter in your Voron 2.4 Exhaust. Unlike the other HEPA box posted here, this one fits the original exhaust housing and should use less material. Print with Filter insert side on…

Downloads
604
Likes
117
Rating
4.89
P
Printablesjbruce12000

roomba side brush

General I tested many different sweeper designs with varying shapes, support, and thickness. This design is a delicate balance of: always keeping the brush spinning (low resistance) on carpet and hard floors proper stiffness of each…

Downloads
459
Likes
77
Rating
5
P
PrintablesZdeněk

Roomba Extended Durability Brushes

These brushes match the original soft brushes for Roomba 5, 6 and 7 series, but are more durable. The brushes printable from here rely on axles from the original brushes, so don't discard worn brushes, just strip the foam and keep the…

Downloads
451
Likes
407
Rating
4.88
P
PrintablesBrandon

Roomba Compatible Side Brush with Replacement Gears

My brush gears have stripped over the years of use, and the brush lost one of the arms due to wear. These are a direct replacement for the brush and gears. Step file added for any needed minor adjustments. Models could potentially be…

Downloads
451
Likes
50
Rating
0
P
PrintablesJarda

iRobot Roomba Dock Holder

iRobot Roomba Dock Holder update 18.4.2025

Downloads
430
Likes
97
Rating
4.75
P
PrintablesALE TNT

Filter cleaner iRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11

Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.

Downloads
388
Likes
69
Rating
4.75
P
PrintablesGt6k

Improved Roomba Aerovac bin door

Here are two designs (and a blank) for an improved bin door to provide better cleaning of the brush. Based on mixed reviews of latest official design I think the performance depends on the exact properties of the hair shed by your…

Downloads
285
Likes
41
Rating
4.83
P
PrintablesKyrillian

"Robot Vacuum Only" Parking Sign (Manual & Automatic Multicolor) - for Roborock, Ecovacs, Roomba, etc.

"Robot Vacuum Only" Privileged Parking Sign This nifty little sign stands roughly 37cm (14.5") tall, which just looks like perfect scale when placed next to your vacuums charging station. The longest part is 20cm (7.8") , still fitting…

Downloads
264
Likes
341
Rating
4.5
P
Printablesakwerdesigns

Roomba Charger Holder

Stick it to your baseboard to hold your roomba charger still. Print instructions Unassociated tags: charger holder, roomba charger Category: Household Summary Stick it to your baseboard to hold your roomba charger still.

Downloads
250
Likes
57
Rating
4.8
P
PrintablesPixxelSnake

Roomba Guard for Clothes Drying Racks

I included 9 different design. 3 different rod diameters (16mm,18mm,20mm). 3 different gaps of the rod to the ground (0mm, 2,5mm, 5,5mm) That depends what clearance your drying rack has to the ground. All designs are 200mm long. The one…

Downloads
230
Likes
77
Rating
5
P
Printablesjbruce12000

Roomba replacement roller sweeper

Roomba Replacement Roller Sweeper fully customizable written using openscad tested with Roomba I4 should work fine with i3 i3+ i4 i6 i6+ i7 i7+ i8 i8+J7 J8 /Plus E5 E6 E7 I,E & J Series Settings Warnings roller_sweeper_aggression - the…

Downloads
230
Likes
57
Rating
4
P
PrintablesMarkoJ

Roomba Robot Vacuum Cleaner Rotating Brush (Bristle Holder)

This is a Roomba robot vacuum cleaner rotating brush or bristle holder for i3/i5 series. v1.1. p.s. For bristles, You can recycle old print skirts (or extrude some material). Cut to length, put in a bristle holder arm, and melt the…

Downloads
222
Likes
55
Rating
4
P
PrintablesKatarn

iRobot Roomba 8XX Series Handle

Handle replacement for iRobot Roomba 880, 870, etc… It only requires a few small supports on the end hooks.

Downloads
221
Likes
13
Rating
4.67
P
PrintablesMike L

IRobot Roomba Filter Cap 900 Series

This is a replacement filter cap for a IRobot Roomba 900 series. There's a version with and without the seal around the cap, if you want to glue some rubber seal on the cap. Update 2022-04-17 Added Seal files to print in TPU / TPE…

Downloads
204
Likes
25
Rating
5
P
Printablesmorf

Dollhouse vacuum cleaner similar to xiaomi/roomba

Dollhouse vacuum cleaner model that imitates the most popular designs.

Downloads
204
Likes
77
Rating
5
P
PrintablesKen226

Voron 2.4 Side Entry Exhaust Housing for Roomba I7, J8 filters.

This is a remix of my previous remix, of the Voron OEM exhaust housing. This one uses Roomba J8 filters, and has a small holder to allow a scissor cut peice of generic activated charcoal filter material, from Amazon, to be installed. This…

Downloads
202
Likes
77
Rating
5
P
Printablesmystydog

Give your Robot Vacuum or Mop a Name Label. For any make, Dreame, Roomba, iRobot ect. 12 Names

My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? Dustbin Timberlake, Dusty Bin, Dirt Vader? My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? The names that I have made so far are below. If…

Downloads
181
Likes
108
Rating
5
P
PrintablesZonk

Roomba Cliff Sensor Cap

This is a Cap for Roombas Cliff Sensor, the Sensor will be deactivated with this modification, so Roomba doesn't get Stuck on black carpets BE CAREFUL - Roomba can now kill himself! He won't stop on stairs or other cliffs. I have tested…

Downloads
180
Likes
20
Rating
5
P
PrintablesMagnatic Design

Roomba Bumper

Does you Roomba get stuck on low ridges? With this bumper you lower the standard bumper to about 1cm. To install, just unscrew the bottom of the bumper, place this print and fasten with the same screws. No supports needed, layer height…

Downloads
179
Likes
27
Rating
0
P
PrintablesKamil G

iRobot Roomba mini S9 desktop robot

I'm trying to make small desktop robot who will hoover the table. It's about 40% smaller than normal roomba, cleaning head is almost functional with gearbox and self aligning feature to the “floor”. Project isn't done yet, and I'm hoping…

Downloads
167
Likes
14
Rating
0
P
Printablesyap

Grumpy Cat on a Roomba

This permanently annoyed feline has claimed the sacred robot vacuum throne and dares you to question his authority. He doesn’t clean. he doesn’t move. he just glares. Perfect for cat people, Roomba owners, or anyone who's ever felt too…

Downloads
163
Likes
25
Rating
4
P
PrintablesSaddamCZ

iRobot Roomba charger dock anchor

A simple holder for the iRobot Roomba chager base, intended to be glued to the floor using double-sided tape. It holds the charger in place, but it can still be easily removed (which would not be the case if you just glued in place the…

Downloads
162
Likes
23
Rating
0
P
PrintablesEO3D

Roomba Roller Release Clip

The roller release clip on my Roomba broke when something got jammed in the rollers. This print replaces the original clip and eliminates the spring. I printed with a .4mm nozzle, .3mm layer height, and 3 perimeters. I used PLA and it…

Downloads
158
Likes
12
Rating
5
P
PrintablesDevise3D

Roomba Side Sweeper Drive Gear

This is a Roomba series 675 side sweeper drive gear replacement. It is perfect for printing if you stripped the screw hole in the original gear or your original gear's teeth started grinding off. Print Instructions Material: PETG, ABS or…

Downloads
157
Likes
20
Rating
5
P
Printablest0b1

Roomba stopper for laundry hanger

These little feet lift our laundry hanger to Roomba's bumper height. Now the robot can still move the entire hanger around, but it doesn't trap itself anymore. :) The included STL is for a hanger with a 17 mm diameter foot bar. The…

Downloads
155
Likes
33
Rating
5
P
Printablesnslesinger

Roomba i Series/E6 Roller Brush Holder Replacement

This is just the arm piece on the Cleaning Head Module for the i Series and E6 Roombas that holds the roller brushes into place. Some disassembly and re-assembly is required - you'll need to move the bright green latch assembly from the…

Downloads
150
Likes
17
Rating
5
P
PrintablesMarek Wojnowski

Roomba i7 replacement rollers

This is my idea of replacement rolls. I made it quite a long time ago and still use at home. It is not perfect but usable :-) Rollers must be made in TPU. Shafts might be PLA, better make pins with something more heat resistant (PETG,…

Downloads
147
Likes
132
Rating
0
P
PrintablesSeethingInGreen

iRobot Roomba Baby Gate Ramp

This file was custom designed by me, to go over the bottom of a baby gate. You can use double sided tape to tape it down, or download the fusion file and put holes in the ramp to screw it down, or to extend it to your needed length, or…

Downloads
146
Likes
16
Rating
0
P
Printablesneale

Roomba 700-series Handle

I kept snapping the tabs off the printable handle I could find, and the "reinforced" model on thingiverse doesn't fit into my Roomba 770. This one does. I printed in PLA, flat side down, with supports for the pegs: I recommend organic…

Downloads
144
Likes
10
Rating
5
P
PrintablesKacey3

IKEA Poang Chair Robot Vacuum (Roomba) Guards

I had tried several other solutions for this, but decided in the end to make my own. These clip on just tight enough that you can pick up and move your chair without fear of the guards moving. There are two sizes, one for the side pieces,…

Downloads
143
Likes
22
Rating
5
P
Printablesmgranger114

Roomba Side Brush Replacement

**********Designed for TPU or Flexible filament************* The side brush broke off my Roomba. So I designed a new one. Print with supports. After you remove them, use an Xacto knife to slice between the strips of bristles to separate…

Downloads
136
Likes
21
Rating
0
P
PrintablesTlustejHanz

Irobot Roomba bumper

Use this to avoid your robotic vacuum cleaner getting stucked on objects or running over tresholds. Glued in place with Den Braven Mamut glue. It can be easily taken down, so there are no warranty issues. Using this on my Irobot Roomba…

Downloads
132
Likes
24
Rating
0
P
PrintablesCtrl_doom

Roomba Charger Holder With Cord Wrap

This model just spaces @DanRogers base holder off the wall & adds a chord wrap to keep things neat. The chord wrap also has room for a cable to pass underneath if your outlet isn't on the right side of the base. Tinkercad link:…

Downloads
132
Likes
22
Rating
5
P
PrintablesDGsHobby

Roomba Roller Brush Door Latch i-series

You'll re-use the green latch and spring, installs with an M2 screw, cut it to length. Use a debur tool to fit the large hole. The fin slides in, but you can also print it as one piece too; I just think it's fragile printing it in that…

Downloads
127
Likes
18
Rating
5
P
Printablesjago

Roomba S9 Cleaninghead Latch

Roomba S9 Cleaninghead Latch, use lever from broken latch

Downloads
125
Likes
3
Rating
0
P
PrintablesNottingham82

Cat on a Roomba

its a cat on a roomba. I havent printed it yet. updates to come. Update: the first file did not have the cat on the roomba! it was floating. I just tried to print it and noticed. I have reuploaded the file now with the cat firmly astride…

Downloads
123
Likes
15
Rating
5
P
PrintablesJared

Cleaning adapter = iRobot Roomba filter to Dyson Animal V7, updated with model file

Are you tired of manually vacuuming your vacuum? This adapter allows the user to clean an iRobot Roomba i7 vacuum filter with a Dyson Animal V7. I don't know if this fits other models. Vacuuming the filter is the best way to clean the…

Downloads
121
Likes
23
Rating
5
P
Printablesgsgx

Roomba Ramp (incl. Fusion 360 File)

I remade drdentz's roomba ramp in Fusion 360. There was a Fusion 360 file in this remix , but there was no design history as it was an import of the original SolidWorks model. I recreated the model in Fusion 360 from scratch, so it's…

Downloads
120
Likes
11
Rating
0
P
PrintablesNebon

Roomba i3 Reinforced Side Brush

This brush is designed for the Roomba i3 ~ i8 and is made using the Bowden-style Teflon tube that many of you probably already have. About 10–15 printed bristles are bent, threaded through the each tubes, and hooked onto the pin inside…

Downloads
116
Likes
54
Rating
0
P
PrintablesA_Str8

Roomba e/i/j Series Filter Shop Vac Attachment

This adapter attaches to a standard wet/dry vac hose and holds a Roomba e/i/j filter so the filter can be cleaned Print as oriented at 0.2mm layer height. I used PETG

Downloads
116
Likes
27
Rating
5
P
Printablesplbogen

Turtle Roomba Shell - Printable

Split up NickySlick's remix so it was printable on a Prusa mk3s

Downloads
108
Likes
86
Rating
0
P
PrintablesACDorkitect

Roomba 694 Bumper Extension

Remix of chrisdruckt's bumper extension with a slight mod to account for the curvature of the Roomba 694 bumper. I affixed this to my roomba with 3M VHB tape, and it won't be coming off anytime soon! Print Settings Printer Brand: Prusa…

Downloads
107
Likes
18
Rating
5
P
Printablesheyiboy

Roomba 690 Robot Vacuum Toy with Base

My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…

Downloads
98
Likes
10
Rating
5
P
Printablesenriverd

Furniture raiser for Roomba

Furniture raiser for Roomba This is a leg extender to raise the furniture, heater or any other house elments that do not let enough space below them for Roomba to clean properly without getting stuck or scratching its surface. The Roomba…

Downloads
98
Likes
17
Rating
5
P
PrintablesErwin Ravau

Roomba stopper for Ikea Glenn chair

No supports needed Print orientation : Standing up on the z-axis Printing with a brim comes in handy for this 200 mm tall object, making it better stick to the bed In order to be more hygienic this design does not touch the floor, the…

Downloads
94
Likes
13
Rating
5
P
PrintablesKosa2222

Roomba Series 8xx Tire

Printing Instructions: Nozzle Temperature: 240°C Bed Temperature: 50°C (adhesion aids such as glue or tape may be required to prevent warping) Print Speed: 20-50 mm/s Infill: 100% for maximum durability

Downloads
93
Likes
21
Rating
0
P
PrintablesDan Rogers

Charger Holder for Roomba - quick and easy

Minimalist remix, this model holds a roomba sweeper charger pad to the baseboard. Just enough to get the job done and no more. A quick and easy print. Use some double sided tape to complete the stick. Attribution to akwerdesigns for the…

Downloads
93
Likes
17
Rating
5
P
PrintablesMirkoFerronato

Lamborghini-Inspired Decorative Top Cover for Roomba-Style Robot Vacuum

⚙ Features: Fits most round robotic vacuums (custom diameter). thin “lid/hat” style cover. Bold Lamborghini-inspired hood lines and vents. 🖨 Print recommendations: Material: PLA or PETG . Supports: for front air vents/headlights if…

Downloads
92
Likes
58
Rating
0
P
PrintablesPaul C

Furniture Lift - to allow roomba to get under the couch

Parametric Furniture Lifter - for roomba - no more dust rabbits Was always annoyed by the roomba not doing under teh furniture and having to do that by hand.. so i made a quick sketch in fusion 360 to make stands for the legs. and it…

Downloads
91
Likes
21
Rating
5
P
Printablessmysnk

Roomba 800-900 series HEPA filter to 4" duct adapter

Designed to fit 800-900 series Roomba filters: https://www.amazon.ca/gp/product/B01H4T4ZGO Category: DIY

Downloads
91
Likes
21
Rating
0
P
PrintablesKyleT

Roomba i2 Bumper extension

Small parts to glue to the unique front bumper's curve on a Roomba i2 robot vacuum. I was having issues with it getting stuck under several pieces of furniture so I created some small parts that can be glued onto the front bumper. I used…

Downloads
88
Likes
16
Rating
5
P
PrintablesAlex

iRobot Roomba i7 Silent Caster Wheel with O-ring

I got pretty annoyed by the sound my Roomba did on tiles, so I've made a simple caster wheel that uses 20x2.8 O-ring to shut it up. Printed on the side with no supports, be sure to have your material shrinkage compensation sorted out, as…

Downloads
88
Likes
27
Rating
5
P
Printablesltrain

Roomba s9 Corner Brush Fitting

The fitting on the corner brush motor of a Roomba s9 is made of a green plastic, so eventually it will strip after replacing the brush a few times. Once it is stripped the brush will continually fall off. iRobot does not sell the little…

Downloads
84
Likes
5
Rating
0
P
Printableseried

bObsweep - Roomba side brush adaptor

Nowadays is actually impossible to find the original side brushes for bobsweep robot vacuums so this allows you to adapt the very common Roomba 800 series side brushes. Print instructions…

Downloads
78
Likes
13
Rating
0
P
PrintablesErwin

iRobot Roomba Front Wheel

Print the wheel part in white and black PLA or PETG. Superglue both parts together. Print the ring in TPU, and slide it over the wheel (no glue needed).

Downloads
75
Likes
14
Rating
0
P
PrintablesMacgamut

Couch Legs (longer for Roomba)

Longer couch legs to allow the Roomba to go underneath. Same base and angle as the originals, just extended another 2.5". I used 4 walls and "Support Cubic" pattern - 20% infill. Seems to be holding up just fine after a number of days.…

Downloads
75
Likes
15
Rating
0
P
PrintablesJose Miranda

Roomba Charging Base Wall Holder

This is yet another Roomba charging base wall holder. This one is made to fit walls with a baseboard, skirtboard, mopboard, or whatever you call it in your country, of up to 3/4 of an inch (19 mm for metric people). Here in Puerto Rico we…

Downloads
75
Likes
7
Rating
0

nevermore roomba filter

Made a version that takes older roomba filter. amazon link here https://a.co/d/6A4MGYh

Downloads
75
Likes
32
Rating
5

Roomba J7+ Clean Base Sound Damper

This makes the unbearably loud sound the clean base makes way less uncomfortable to be around when cleaning. This is designed for acoustic foam to be cut to fit or glued in on the back side. The foam must only be 1in-2in thick so you…

Downloads
75
Likes
14
Rating
5
P
PrintablesAndAug

IRobot Roomba 7 Series Caster Wheel

Caster wheel for IRobot Roomba 780. Needs a bit of "post processing" with a 9mm drill, if printed without support. Made to fit 4x9x4 bearing. Print Settings Printer: (My) Anet A8 ;) Rafts: No Supports: Doesn't Matter Resolution: 0.15…

Downloads
74
Likes
12
Rating
0
P
PrintablesKim U.

iRobot Roomba Dock Station Wall Mount

Remix from Thingiverse I liked the holder, but the curves were a bit too rough for me. So I redrawn it for a higher resolution. I also suspected a predetermined breaking point on the slope above the holder and rounded it. I think it's…

Downloads
74
Likes
11
Rating
0
P
PrintablesTom Wilkie

iRobot Roomba S9 Bumper Extension

A bumper extension for the iRobot Roomba S9, raises the height of the bumper on each corner to prevent the vacuum getting stuck under furniture. Print two (one mirrored from the other) a use double-sided tape to attach to the Roomba.

Downloads
74
Likes
8
Rating
0
P
PrintablesSiano

iRobot Roomba dock station wall mount

Remix from https://www.thingiverse.com/thing:3152891 Category: Household

Downloads
71
Likes
7
Rating
0
P
Printableswenjuk

Roomba 981 Homestation fixing to a Wall

Bracket to attach the Home Station of an iRobot Roomba 981 to a wall, with space for a baseboard. Klammer um die Home Station von einem iRobot Roomba 981 an einer Wand zu befestigen, mit Abstand für eine Fußleiste. Print instructions No…

Downloads
71
Likes
10
Rating
0
P
PrintablesMa Ple

iRobot Roomba 7XX Series Griffstück (Handle)

Griffstück passend für iRobot Roomba 7xx. If you want to support me you can click on the “Affilliate-Links” (Attention “Advertising”) below. -I used PETG for print: https://amzn.to/48FBGeT or https://amzn.to/48EDYeh

Downloads
68
Likes
2
Rating
5
P
PrintablesGage

Roomba Filter Clearner - Shark Navigator

Shark Navigator adapter for cleaning the filter on a “iRobot Roomba Series ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+” robot. Simple, no support, without snap mechanism. As always, here is a link to the original CAD:…

Downloads
68
Likes
14
Rating
2
P
Printableskvn5x4

Roomba 800+ Series Filter Door Replacement

It has been known that the filter door latch for the Roomba 800+ series breaks over time with no current resolution without buying a whole new bin assembly or paying a ridiculous amount for just the door. I modeled this directly off my…

Downloads
67
Likes
5
Rating
0
P
Printablesbwolfram

Roomba Filter for AirManagerV2

Buy the filter here on Amazon or any other place that sells Roomba accessories. https://www.amazon.com/gp/product/B00K7DMEJ0/ref=ox_sc_saved_image_2?smid=A2PVM5SNBKAIHK&psc=1 You don't need to take the tab off as it should slot into the…

Downloads
65
Likes
14
Rating
1
P
PrintablesPumpkinSouffle

Roomba Charger Holder universal power plug notch

I printed the original design in Prusament PETG black at 0.2mm. When I went to install it, I unfortunately realized the power on the charger base of the iRobot Roomba 690 Robot Vacuum plugs in on the right, not the left. I sliced up the…

Downloads
65
Likes
9
Rating
4.33
P
Printableszeus

Roomba anti-drag mount

Simple mount for keeping the Roomba from dragging its base with it and/or securely attach the dock to a safe and defined position without the hassle of taping the dock to the ground. works fine with my Roomba 585, but should be fine with…

Downloads
63
Likes
11
Rating
0
P

Prusa Box Roomba Hepa Filter w/ tabs

Instead of just cutting the tabs off the Roomba filters, I made the holder fit with the tabs that needed to be cut off.

Downloads
62
Likes
16
Rating
5
P
Printableseurad

Roomba Anti-Stuck/stoppers for (certain) laundry racks

These are no one-size-fits-all Roomba stoppers like others I've found. They are tailor-made for the following two laundry rack models: Leifheit Pegasus Alpfa Magic I printed them from TPU and fixed them with a small screw. The screw may…

Downloads
62
Likes
21
Rating
4
P
Printablespossebaer

Roomba Segmented Snap-On Bumper (updated)

Update After a discussion with a https://www.printables.com/@PennybridgePioneer (see comments) and some time in between I noticed that I could improve the center piece – read further down what and how. Problem We have some obstacles…

Downloads
62
Likes
11
Rating
4
P
Printablessaso

Roomba 8xx Charger Wall Holder / Roomba 8xx nástěnný držák nabíječky

[EN] This bracket is designed for mounting on a wall with a plinth 12mm deep and max 85mm high. The charger cable can be attached to the bracket with zip ties. The eyelets for the zip ties are integrated directly into the holder. I have…

Downloads
61
Likes
19
Rating
5
P
Printablese_cubed99

Roomba Room / Chore Tracker

Handy little print lets us keep track of which rooms have been vacuumed and which still need to. We do a room a day while we are at work. This keeps track of what we've done and which need doing. Slider and base both have 5mm diameter x…

Downloads
59
Likes
17
Rating
0
P
PrintablesAKG

end pieces for roomba ramps

the files as they are are 45mm wide per piece i did make a change to the screw brackets, they are twice as wide you might need some longer hardware but with this change you can scale it quite a bit on the X axis without worrying about the…

Downloads
59
Likes
8
Rating
0
P
PrintablesTom B

Roomba Virtual Wall Base

This is a base to hold the Virtual Wall device for the Roomba. The purpose of this print is to give the Virtual Wall a much larger footprint area to increase its stability immensely. We used this specifically on top of our Christmas tree…

Downloads
59
Likes
2
Rating
5
P
PrintablesMaura

Roomba bumper low guard

I printed two of these in PETG using Prusa i3 MK3s+. Then attached them onto the Roomba 960 bumpers with VHB tape on either side of the front sensors. We have floor level windows and the roomba would continuously try to vacuum there,…

Downloads
58
Likes
25
Rating
5
P
PrintablesCarlos Jaime

Roomba Filter for AirManagerV2 right side fixed

The right side was 2mm off so I mirror the left side

Downloads
58
Likes
13
Rating
4.5
P
PrintablesTony Lehnert

iRobot Roomba Button Cover

A cover to protect the CLEAN button of an iRobot Roomba (mine is an i7, should fit on others too). Might work great against curious cats. The button is still accessible through the hole. I attached it with double-sided adhesive tape.

Downloads
57
Likes
6
Rating
0
P
PrintablesMirkoFerronato

Lamborghini-Inspired Decorative Top Cover for Roomba-Style Robot Vacuum 2

⚙ Features: Fits most round robotic vacuums (custom diameter). Thin “lid/hat” style cover. Bold Lamborghini-inspired hood lines and vents. 🖨 Print recommendations: Material: PLA or PETG . ⚠ Note: This is a decorative add-on only . It does…

Downloads
56
Likes
37
Rating
0
P
PrintablesChiprobot

Roomba ChewwyBot cleaner

This is an aid to help with the removal of hair and fluff from the roller of a Roomba Robot cleaner. Operation :- remove the Roomba's roller, slip the large diameter of the ChewwyBot cleaner over one end (you might need to twist it a bit…

Downloads
54
Likes
34
Rating
0
P
PrintablesBurns3D

Comb for Roomba Brush

If you have long hair, you know how frustrating it is to remove it from the bristles of the Roomba brush. Here is an easy print comb to remove stubborn, wrapped-around hair from the bristles of the brush. Just take off the yellow bushing…

Downloads
54
Likes
15
Rating
5
P
PrintablesPaul C

Roomba Sweeper Replacements

# Roomba e5 Sweeper Upgrade - Printable Replacement Rollers ## Overview This upgrade provides printable replacement rollers (dredges/sweepers) for Roomba vacuums. Designed for Roomba e5 (purchased from Amazon), but adaptable to most…

Downloads
53
Likes
50
Rating
0
P
PrintablesZdeněk

Roomba Main Wheel Replacement

Description The original wheel on my Roomba had its splined hub stripped, so I designed and printed this replacement. The wheel disc is printed in PETG , and the tire is printed separately in FLEX and then assembled. The original parts…

Downloads
52
Likes
18
Rating
5
P
Printablest-nissie

Raiser foot for furniture, 95 mm for Roomba, with FreeCAD source

Height: 95 mm Four drill holes: 32 mm x 32 mm MD5 (kitchen.FCStd) = b948efb54d32d462692f081d28c40632 MD5 (kitchen.stl) = 11c1f1733e48d040f04a3986bd08209a Method: Material: PLA Layer Hight: 0.3 (Extra Fast) Wall Thickness: 1.2 Top/Bottom…

Downloads
51
Likes
3
Rating
0
P
PrintablesDot Dot Dash

iRobot Roomba S9+ dock fix

Got a Roomba s9+ with the tab that moves the bag tube broken. You can not purchase this part and finding a used replacement is VERY hard, SO I designed this two piece fix for the tube tab. printed in PETG with 100% infill 4 perimeters and…

Downloads
49
Likes
14
Rating
5
P
PrintablesStormCrow 13

Stabby The Roomba

Two versions of a roomba with a knife duck taped to it. Scaled for 28mm scale tabletop games. I am starting a patreon Category: Games

Downloads
48
Likes
11
Rating
0
P
PrintablesSpicyLimes

Dyson - Roomba Filter Attachment

Greetings, I whipped out the ole Roomba 960 vacuum the other day and notice the filter was incredibly dirty, so I decided to give her a quick cleaning but I realized that it would be much easier to simply vacuum the filter to remove light…

Downloads
46
Likes
7
Rating
0
P
PrintablesQCoachworks

Roomba S9 Side Brush Plastic Mount

The Roomba S9 vacuums have a small, green, injection-molded piece in the corner for the side brush. This plastic piece had stripped out after several years of replacing the side brush. Rather than replace the whole side brush assembly I…

Downloads
45
Likes
0
Rating
0
P
PrintablesJohn

iRobot Roomba Gridfinity Spare Part Bins

Edge Sweeping Brush Holder Multi Surface Brush Holder Dry (Vacuum Only) Filter Holder Wet (Vacuum & Mop) Filter Holder

Downloads
44
Likes
11
Rating
0
P
Printablesafazzari

Roomba Virtual Wall Holder

This thing mounts to the baseboards to hold a Roomba Virtual Wall. Keeps the device from falling over due to pets, kids, etc. There is a spacer to clear the shoe moulding, which is 11 mm in my case. Print Settings Printer Brand: Monoprice…

Downloads
44
Likes
8
Rating
4
P
PrintablesScott

Roomba under cabinet bumper

My Roomba would often wedge itself underneath our kitchen cabinets and sometimes it would end the job stuck. I created this bumper to install every 6-12" with a single screw, so that the Roomba could still clean under the cabinets, but…

Downloads
42
Likes
24
Rating
0
P
PrintablesEMT EOD Martin

Extension Cord Ramp for Roomba

Print this to make extension cords on the floor safer for people walking by, as well as easier for your Roomba to navigate without pulling on the cords. Scale up or down based on the size of your cords. No supports needed, can be printed…

Downloads
42
Likes
11
Rating
4.5