3,372 models
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
A simple bottle dryer to plug together and save space in the closet. Based on the v2 design of https://www.printables.com/model/382554-bottle-dryer-system-v2 - only slightly higher with wider feet, so that even larger bottles (including…
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant
Perfect winter accessory for your car. You know that feeling when you've just cleaned your car from ice and snow and your gloves are soaking wet. That was exactly the case of my mother. I've designed this accessory to solve this problem…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Custom lithophane stand included. This was a test using LuBan instead of my usual applications. It needs work. Software used: Photoshop and LuBan Dimensions: 135xx 133mm x 3.2mm(3.52mm with frame). Print settings and information:…
Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant
Auto-Rewind Spool Holder for the Polydryer Box Axis and 75mm spool holder for the integrated Auto-Rewind Spool Holder by Vincent Groenhuis. I replaced my MMU3 buffer with these auto-rewinding spool holders.…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Adapter for 250g Spools: Sunlu, Jayo, Tinmorry, Eryone Designed for 250g spools from Sunlu, Jayo (plastic), Tinmorry, and Eryone (cardboard). Sunlu and Jayo share plastic spools, Tinmorry and Eryone share cardboard ones. Remixed from…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
A fully printable clasp based on the one worn by Daemon Targaryen (Matt Smith) in the upcoming Game of Thrones prequel House of the Dragon. Included are the left and right clasps with a snap fastener to hold them together and a smaller…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Game of Thrones coaster - Targaryen Diameter : 100 mm Dessous de verre/décoration Game of Thrones coaster - Targaryen Diamètre : 100 mm
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
This was a quick 20m job in openscad, importing a House Targaryen symbol and making it into a plaque. Wanted to try out the colour swapping based on layer on my Prusa i3 MK2S and this seemed like a good idea. Really loved how it turned…
Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant
Kids come home from Muay Thai. This allows the glove to open up more so it dries out faster and smells less.
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
This is an over engineering mitten and boot dryer for use over a forced air furnace vent measuring 14 inches by 6 inches (350mm X 150mm). Each tube can be turned on or off and has a unique air flow path forcing air out into the mitten but…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for PETGSource material: PET
no supports needed, just use some brim
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for PETGSource material: PET
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET
Pattern from the website: https://www.thingiverse.com/thing:4904219 Drawn for eSUN eBOX Lite dryer. I've added cutouts for buttons. Printing time for both parts is 12 hours. EDIT: After several days of use, I noticed that I made too large…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
Simple wall mount, secured with double sided tape.
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for PETGSource material: PET
Mine got broken, so I measured the original part and created a replacement. Fits my appliance great and does the job. Printed on its flat side with PETG 100% infill with organic supports.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Anytime to find a way to dry my base caps with rolled to a ball towels, I decided to create a basecap dryer in Fusion. So my best second half helped me to wrap some aluminium foil around my head to get the right size. The dryer is made…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This is a replacement part of a clothes dryer protecting plastic part for the foot/stand. See the Pictures. I used PETG. Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG (PLA) Supporting Material none Comments…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
60mm Fan guard for EIBOS 3D Filament Dryer CYCLOPES, but can be used for any other fan :) After the fan grill of my EIBOS Filament Dryer melted, I had to replace it. I liked the design of https://www.thingiverse.com/thing:1274150 and did…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
Hello, This is a replacement dryer knob I made for my GE DBSR453EB0WW dryer. It has a couple of features that make it a little harder to print, like the small rise on the bottom which requires support material, but it matches my dryer…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Hair Dryer Wallmount printed in PETG. 75mm Diameter
Print approx. €3.67–€4.49 excl. taxPreliminary estimate for PETGSource material: PET
The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
English see below. Es gibt nun auch ein Variante für flache Straßenschuhe, siehe Remix . Ich habe mich immer darüber geärgert, wenn ich unterwegs nach einem langen Marsch oder einen Lauf im Regen feuchte Schuhe hatte. Im Hotel findet man…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
ON YOUR OWN RISK! In general you need heat to dry filament. Only silica gel etc. is not enough to move the moisture out of your filament. If you don't have a dryer like me, you can use your print bed for drying. You can use a small box…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
An additional silica Box for the Polymaker PolyDryer. It can contain up to 30g Silca. Keep your filaments dry :)
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Remix of the brackets of this. https://www.printables.com/model/309871-sunlu-tecbears-fila-dryer-s2-filament-trockner-s2/remixes
Print approx. €8.76–€10.70 excl. taxPreliminary estimate for one variant
I designed this tool to make it easy to lift a silicone liner basket out of the air fryer. The liners came with little mitts that are awkward to use and tongs are no better. With this, you tilt it a little and slide one side into the…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
This is meant for a paired combo of Kobra 2 Neo and the Dikale single spool filament dryer- it may work for other combos! especially the other anycubic FDM's. Please let me know if you try for other dryers or printers!
Print approx. €14.32–€17.51 excl. taxPreliminary estimate for one variant
PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints This mod platform is designed to be placed inside the Polymaker PolyDryer , transforming it into a more versatile tool for makers. By elevating objects inside the chamber, it…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Handdoekdroger kapstok, Towel dryer coat rack, Handdoekdroger haak, Towel dryer hook. Deze haak past rond de ronde staven van een badkamer verwarming. PLA filament rekt uit en na een tijdje vallen de kleren er af. Abs filament is beter.…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This is a solution to getting the Drinkmate CO2 pressure bottles off of your kitchen counter and (hopefully) looking cleaner while being rapidly accessible. We purchased a Drinkmate machine several months ago and use it daily; this means…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Motivation I wanted to provide a continuous PTFE tube connection from my Polymaker PolyDryer Storage Box to my Prusa CORE One. Solution Design and print a custom adapter and nut to accept a pneumatic fitting for a PTFE tube that achieves…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
125mm x 60mm, (5" by 2 3/8") clothes dryer vent cover. Designed for a 4" exterior dryer vent opening with no flapper; see photo. Our old dryer vent cover has no flapper, so wildlife enters the dryer regularly. I love random lizards in the…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Zo kan je handdoeken ophangen aan de kast deuren. Misschien moet je de dikte wat aanpassen voor over jouw deuren te hangen. Het binnen werk is wel in een flexibel materiaal geprint. This way you can hang towels on the cupboard doors. You…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Delimano Air fryer (LQ-2501) sliding clip from the basked handle. The original translucent clip was broken so I prepared this new one. Recommended print settings : Print with PETG or something more durable. Print with 0.2 quality layer…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
The original bracket by @Ibot_3D was a great fit with the Sunlu S2 filament dryer, but I couldn't rely on the magnets to hold the bracket on the cart. It was too easy to knock the dryers onto the floor by brushing against them (or perhaps…
Print approx. €14.24–€17.40 excl. taxPreliminary estimate for PETGSource material: PET
Vor- und Nachteile auf einen Blick: + 60°C Heizpad verwendbar + transparente Box + billig, weil kein kauf einer Box von IKEA/Sunlu nötig + weiterverwendung des original Spulenhalters + weniger Filamentmaterial notwendig, wegen…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant
This is a remix but I put a lot of tweaks on it. I wanted something that could hold multiple sized balls but also attached to the wall near by. The STL is a solid piece that I split using the cut tool in prusasclicer 2.6 with 2 pins to…
Print approx. €15.34–€18.74 excl. taxPreliminary estimate for one variant
A simple and fast printed cover for your rotary base. Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 100%
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for PETGSource material: PET
CAUTION! Broken desiccant beads can fit through the slots. Be aware. Material: PLA Infill: 15% Layer settings: -Tube, set to 0.3 w/ variable layer height, adaptive only (see image) -Base, 0.3 Supports: -Tube and cap, only the locking tabs…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
It just need few screws and threader (I used M3)
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
I decided to add a switch to the dryer portion of this laundry center and introduce a ringing belle as an alternate to the default buzzer; used to signal the end of cycle. Rotary switch has a spline shaft, but all laundry style knob…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
FIXDRY filament dryer box extension for 8 cm spools - V2. Rozšíření FIXDRY sušičky filamentu pro cívky šířky 8 cm - V2.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
I recently covered my Lack V2 enclosure's lid with industrial-strength Velcro. Then, I snagged a few heaterboxes off of Amazon's Prime-day. Unfortunately, I didn't consider how little contact area there would be for Velcro. This box is…
Print approx. €14.02–€17.14 excl. taxPreliminary estimate for PETGSource material: PET
I've been fairly happy with my filament feed system that I converted from a commercial food dehydrator. Sometime, a new spool will get a little slack, and filament will wrap around the center axel underneath the spool on the way out of…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET
I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)
Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…
Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…
So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…
I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
Tired of broken wall mounts? Meet the wall mount your PolyDryer actually deserves! If you're like me and love your PolyDryers but found yourself frustrated with the original wall mount being difficult to use (and worse, breaking over…
A simple solution to keep filaments dry even when they're stored in Bambu AMS for a long time. While AMS does store filaments quite well with airtight container, I just wanted active drying solution implemented as I have been running all…
Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…
I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…
This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…
I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.
This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…
Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…
Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…
fruit washer and drier. small and large. can also do vegetables.
A little friend for the kitchen! happy printing ;) You should also try v2: https://www.prusaprinters.org/prints/43601
Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…
I hate hanging up socks. This makes it a little better.... For the hexagon look, simply set the bottom and top layers to 0, perimeter 3. Hexagon infill 15%. For more stability it can of course also be printed normally.
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574 . I loved the aesthetic of the original but found it was a little unstable with a bottle fitted and scaled down prints for small bottles were too fragile to be…
Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…
The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…
CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…
To change you need to use Solidworks 2022 or later
If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…
Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…
This improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance. Some parts of Multiple Mechanism Auto-Rewind Spool Holder have been…
Two models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg. Wider model is as wide as it can be, to fit nicely…
Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…
Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…
Adapter plug to convert the 6mm inlet on the PolyDryer to fit 4mm OD PTFE tubes. Now it's possible to directly feed from the dryer with a fully constrained reverse bowden setup. I have included the step files, so you can modify it to suit…
Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…
Remixes Available for other Food Dehydrators: Silvercrest 350W / Quigg 350W Food Dehydrator: https://www.printables.com/model/494734-2-spools-filament-dryer-for-silvercrestquigg MisterChef® Professional Food Dehydrator, 250W:…
a better friend for the kitchen! Print instructions Regular Pla, no supports. 100% scale. Happy Printing!
Narrower remix of the original box to fit the AMS 2 Pro.
This adapter allows the replacement of the rubber grommet for the 4mm PTFE tube with an M6 pneumatic fitting to avoid the PTFE tube from being pulled into the dryer. Update 4/19/24: I noticed that the adapter will loosen up after repeated…
