Search results: sed

Sort order

5,557 models

P
Printablessacrilegor

Dremel box organiser - Gridfinity based

I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…

Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant

Downloads
4,546
Likes
1,481
Rating
4.92
P
PrintablesJoshPeddle

Cherry MX Compatible Flat Top Keycap - FDM optimised - Simple to print

Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
2,086
Likes
177
Rating
5
P

Wire Soldering Grips (Revised)

The wires (or component, such as a switch or LED) are held by the flexible fingers so that you have two hands to hold the soldering iron and solder. The springs added to the original design provide greater flex in the fingers and a wider…

Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant

Downloads
1,508
Likes
441
Rating
5
P
Printableslostintech

Z-Hop Based Torture Tests

I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,397
Likes
97
Rating
4.88
P
PrintablesJotaEmePM

Pokemon Trading Card Game - Ability Used Marker

0.2 mm Quality 15% Infill Generic PLA Settings You can set a second color in 2.20mm (11 layer) Printed in a Prusa MK3S+

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
1,101
Likes
76
Rating
5
P
PrintablesAlexMu

Fan duct optimised

NEW VERSION https://www.prusaprinters.org/prints/48024-fan-duct-optimised-for-anycubic-i3-mega Its getting more and more important to do fast prints. So this CFD flow optimized duct helps. As well you get much better bridges if you have a…

Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
677
Likes
62
Rating
0
P
PrintablesMartin_au

Embiggened, braced, reversed, Prusa Mk3 Einsy enclosure.

This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…

Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
618
Likes
89
Rating
4.72
P
PrintablesMehTechArt

Subaru Impreza WRX STi Sedan Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…

Print approx. €11.71–€14.31 excl. taxPreliminary estimate for one variant

Downloads
611
Likes
188
Rating
0
P
Printablesdintz

Wichtel Hochbeet / Dollhouses Raised Flowerbed

This gnome raised flowerbed (German: Wichtel Hochbeet ) can be used as an accessory for a Christmas gnome door or in a dollhouse. Print settings I printed the model with 0.2mm layer height, 30% infill with the PrusaSlicer QUALITY profile.…

Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant

Downloads
422
Likes
68
Rating
5
P
PrintablesMichal Hlaváč

Prusa MK4 feet (released V2)

Prusa MK4 feet's V2 Changelog increased stability and contact surface 100% infill to reduce springing and transmission selects Print settings material: Prusament PETG layer height: 0.2mm infill: 100% V1 Print settings material: Prusament…

Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
66
Rating
4.75
P
Printablesrbid

Seedlings/Small-Plant Support Rings (to be used with bamboo sticks)

I grow hot peppers, and when the seedlings go out from the propagator, they sometimes need some support, therefore this was the motivation to create ones. I can get for a cheap price bamboo sticks from various diameters (3.38mm, 4.00mm,…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
82
Rating
5
P
PrintablesHarsesis

FilaMan Revamped - NFC based spoolman scale

FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
263
Likes
50
Rating
5
P
PrintablesMatthias

Druckluftschlauch-Wandhalterung - Compressed air hose wallmount

Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…

Print approx. €8.84–€10.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
232
Likes
34
Rating
5
P
PrintablesUrsaMajor303

TYT MD-UV390 MD-390 Knob Guards (Revised)

Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
203
Likes
8
Rating
5
P
Printableskrisvda

Baby sword rattle with embossed Norse runes

This is a remix of Targ 's Baby Sword Rattle , with embossed Norse runes added to the blade. They spell the name of the name of the baby this gift is for. I only added to the design of the blade. The other model files and detailed…

Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
46
Rating
0
P
PrintablesKatDelgado

Adjustable Phone Stand v2 (superseded)

( Update: please see https://www.printables.com/model/661034-adjustable-phone-stand-v3 for my latest design, that prints faster and works better. ) https://www.printables.com/model/644570-adjustable-phone-stand was my first phone holder.…

Print approx. €7.13–€8.72 excl. taxPreliminary estimate for one variant

Downloads
187
Likes
33
Rating
5
P
PrintablesToWcH

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
15
Rating
5
P
PrintablesPeter Farell

Rudolph the Rednosed Reindeer Santa

Rudolph the Rednosed Reindeer Santa

Print approx. €15.01–€18.34 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
43
Rating
0
P
PrintablesKutte

Cursed Unicorn Skull / Verfluchtes Einhorn Schädel

Cursed Unicorn – The Shadowhorn Model of the Cursed Unicorn Skull with Stand Collection: Fantastic Skull Collection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (Includes three pre-sliced files at…

Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
56
Rating
5
P
PrintablesTobias Stanzel

Arduino based DIY Talking Pet Buttons (Cats, Dogs,...) - easy custom voice samples!

Description Ever wanted to know what your pet wants to tell you? This won't solve it! But still can spark some joy and fun! An Arduino-based DIY version of Talking Pet buttons! It's easy to build and add customized sound samples to use…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
108
Rating
4
P
PrintablesPeopleware

Kabelrolle basierend auf Prusa Filament Spulen / Cable reel based on Prusa filament spools

for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
40
Rating
5
P

Flush Ring Pull, Marine Recessed Handle for Drawer and Locker

I have seen these (in brass) on boats and some high-end luggage, such as the 1870's English officer's wood luggage he used when going off to India. The mounting holes are based on a #5 x ¾" Steel Phillips Flat Head Screw for Wood. They…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
128
Likes
40
Rating
0
P
Printablesbeefswizzle

Surprised Pikachu MMU

Made this to test out my mmu3 and set up. Uses 5 colors and at 75% it takes about 36m with 26 tool changes. Printed in polymaker polyterra PLA.

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
19
Rating
5
P
Printablesfaultedlogic

Skull & Crossed Wrenches Fan Grill for Satsana Fan Duct 40mm Heatbrake Fan

I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
10
Rating
0
P
PrintablesJeffsPrints

CORE One Vent Open/Closed Indicator and Handle

Since the CORE One does not have a handle to slide the vent open and closed, I decided to create one. After I created an initial handle, I wanted to see if it was open/closed at a glance. I printed in PETG, though should work fine in any…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
102
Likes
40
Rating
4.25
P
PrintablesPeter Farell

Distressed Celtic Pendant

Distressed Celtic Pendant

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
47
Rating
0
P
PrintablesFvones

Tiskátko do keramiky/těsta - sedmikráska / ceramic/dough stamps - daisy

velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
20
Rating
0
P
PrintablesDiastako

Adapter for M24 (as used in Greece) Mop to cone threaded pole

This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
7
Rating
0
P
PrintablesPeter Farell

Possessed Grand Piano

Possessed Grand Piano

Print approx. €13.92–€17.02 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
42
Rating
0
P
PrintablesM. H.

Brain decal modular remix for increased print size

Isolated the four individual traces for each of the four sides plus a center to slot them into. This makes it possible to print much larger (220% size on the Prusa Mini). I also added a center with a fake processor. Numbering is…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
16
Rating
3
P
PrintablesPirateSands2

Topology Optimised Doorstop

A doorstop topology optimised for force on the top and back surfaces. Printing Should print with fairly standard settings. I recommend printing upside-down so that the sloped top surface will end up being flat rather than stepped (see the…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
12
Rating
0
P
PrintablesArchTyriel

.338 Lapua Magnum Reloading Tray Condensed

Wanted to modify another user's design to be more compact and fit my needs. Used for reloading .338 Lapua Magnum Brass

Print approx. €10.92–€13.34 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
5
Rating
0
P
Printables3DHippo

Posed Zombie Hands

I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…

Print approx. €12.10–€14.79 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
20
Rating
4
P
Printables3DHippo

Storage Container for Powder based drinks

Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
17
Rating
5
P
PrintablesBoros

Modular dog raised bowl

This model is designed to fit a Prusa MK4. You can use PLA for printing. For general infill, I suggest using 5%. However, for the joints, please use modifiers to increase the infill to 15% or 20%. I hope your dog enjoys it :)

Print approx. €6.43–€7.85 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
22
Rating
0
P
PrintablesMetikumi

Decorative Six-Pointed Stars with Raised Geometric Profile

I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
10
Rating
0
P
PrintablesMykal451

MK3S+ Einsy Case w/OEM Look and Feel Expanded & Reversed

My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
15
Rating
4
P
Printablescunninghamd

Raised Nut and Bridge - for Headless Baritone Ukulele

Raised nut and bridge for the Headless Baritone Ukulele

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
2
Rating
0
P
PrintablesNorberg

Watertight container with reused screw cap

Upcycle the screwcap TwistCap OSO 34 from a Tetra Rex package often used for milk and other liquids. Creates a waterthight seal to keep the content safe from water. Freecad model included to allow customization. No support needed.

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
16
Rating
5
P
Printablesmstejska

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
22
Rating
0
P
PrintablesUeli

Case with cover for mXion CV-Programmer (used for DCC model trains)

See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…

Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
4
Rating
0
P
Printablesmatemaciek

Escalightor: signal lights for motorised desktop escalator

Project info Motor in original model is connected in a way that allows it to spin in both directions. We can use that to connect LEDs parallel to it, and thanks to their property of passing current in only one direction we can connect two…

Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
16
Rating
0
P
PrintablesSHR3D.eu

VOLTa221 – Modular Educational Electronics Kit (WAGO 221 Based)

[ENG] VOLTa221 is an innovative open-source kit that combines accessibility, flexibility, and hands-on learning. Each module can be 3D printed and equipped with WAGO 221 connectors, enabling quick and reliable wiring without soldering.…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
30
Rating
0
P
PrintablesCheese

Decora recessed keystone jack insert

I kept damaging my Ethernet cable by bumping it with a nearby storage basket, so I wanted to find a wall plate that would recess the jack out of the way. None of the ones I found nearby fit Decora style wall plates, so I designed my own.…

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
1
Rating
0
P
PrintablesShaggy

D&D movement rule 30ft raised letters

Just a little twist. Have fun, great ice breaker gift when meeting new players

Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
2
Rating
0
P

Coil Stamp Holder - based on Andy Rooney’s brass desk set

Andy Rooney was my favorite television personality who closed every 60 Minutes show on NBC a few years (decades?) ago. He was the ultimate curmudgeon. A classic observation he made was that “If the chances were 50-50 you would get the…

Print approx. €2.44–€2.99 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
9
Rating
0
P
Printablestickl

Duplex receptacle recessed conversion (US Type B standard)

What is it? Example of a standard duplex receptacle: https://www.homedepot.com/p/329118072 Example of a recessed duplex receptacle: https://www.homedepot.com/p/202066691 Print instructions: Orient flat side UP hollow RECTANGLE on TOP…

Print approx. €19.28–€23.56 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
0
P
PrintablesCesare Catitti

raised stand warpaints colors in prusament cardboard box

a remixed model to let bottles stay fixed at mid air even when the box is shaked

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
6
Rating
0
P
Printablesjarred agney

Revised Bino Plate

Bino plate with recess for Acra mount plate at bottom. Integrated slots for straps to hold binos down. Printed with PLA and 6 walls 25% infill, very rigid. Insure that you print the plate upside down that the recess is on top.

Print approx. €8.35–€10.20 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
3
Rating
5
P

Cyklosedačka Hamax caress: držák na lahev

Držák se přidělá na madlo sedačky pomocí tří stahovaček - v modelu jsou připravené otvory. Vhodné pro klasické PET-lahve do 0.75l Tisknuto z PETG pod zarážku jsem dal radši podpěry, přeci jen má úzkou základnu… Holder is fixed to the baby…

Print approx. €7.44–€9.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
5
Rating
0
P
PrintablesRoromoomoo

Sun Glasses arm: Tribord sailing polarised sunglasses 500

Designed using Autodesk Fusion. I printed with Anycubic Kobra neo 2. There is a face you are able to print from at that allows for less supports needed for parts of the print that are at an angle. I used callipers to take measurements of…

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
1
Rating
0
P
PrintablesMakerPy

Phanteks P400 raised feet

These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…

Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
6
Rating
0
P
Printablesscatty

Gridfinity holder for daily used printer tools

This helps me keep the tools I use the most around my printer in an orderly manner. It holds the printed spatula, that came on the USB stick with the printer, a brass wire brush and a pair of tweezers. It complies with the Gridfinity…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
5

Debossed Pumping Station:One Bracelet

A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P
Printablesmartin85

Gear to be used on electric train, optimized for MK4S, sharp teeth, strong

I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
0
P
PrintablesSi1verEag1e

Reversed screw for Wider and narrower remix spool holder

As a part of my new fillament spoolholder system, I chose to use the Wider and narrower remix spool holder , which is a remix of https://www.prusaprinters.org/prints/146757-spool-holder-with-bearings which is a remix of orginal model…

Print approx. €4.89–€5.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
4
Rating
0
P
PrintablesPieter Koenen

PTFE holder used for the injection molded Spool holder - R4 with the hole relocated and rotated for a spool that is less wide.

This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
Printableslordofhyphens

Revised Protoxtruder 2.0 ebb36 mount for tapchanger

GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0
P
PrintablesF Engineering

ISO 7000-0017 automatic control (closed loop)

EN: To indicate any automatic closed loop function. DE: Zur Anzeige einer automatischen Funktion mit geschlossenem Kreislauf.

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesHardworkingDog

Sad/Distressed Window From Tomodachi Life

This model is from the Nintendo 3ds Game: “Tomodchi Life.” I tried looking for these and say no one had made any I decided to make them myself. Right now I'm working on something big right now but my printer is not cooperating so expect…

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
PrintablesMIGO-Design

Nash 1952 Sedan inspired Toycar

First print all parts. Then glue the cabin, the body, the grille and the bumpers together. Screw the rims to the axles and put the tyres on. Then glue the axles under the body. I used pla for the parts, except for the tyres. The tyres are…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
3
Rating
0
P
PrintablesZbyšek Chytil

Print approx. €5.52–€6.74 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesSven Sommer

D-Sub Connector Hood v2, long – DE9 to DD50 (9 to 50 pins), closed with cable ties

This is version 2 (longer, five sizes) of my D-Sub Connector Hood – DE9 / DA15 / DB25 , published as a remix of it. Version 1 (shorter, three sizes) stays online unchanged. What's new in version 2 Two new sizes: DB37 (DC37) and DD50…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2
Likes
0
Rating
0
P
PrintablesPeter Farell

Midway Xenophobe Snotterpillar Based on Cover Art

Midway Xenophobe Snotterpillar Based on Cover Art Not the ingame sprite...The artist who developed the arcade cabinet art obviously never played the game.

Print approx. €9.19–€11.23 excl. taxPreliminary estimate for one variant

Likes
4
Rating
0
P
Printablesthrutheframe

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…

Downloads
43,320
Likes
4,636
Rating
4.91
P
PrintablesDavid D

Raised Multiconnect - generic connector for multiboard v2

Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…

Downloads
8,512
Likes
817
Rating
4.78

THE 100 v1.1 - The fastest 3D printer based on a printed Frame

Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…

Downloads
6,490
Likes
2,096
Rating
4.95
P
PrintablesOchrum

Halloween Surprised Ghost

Ghost for Halloween decoration

Downloads
5,931
Likes
932
Rating
5
P

Ikea Skadis Hook Stabilised multiple sizes Customisable

UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…

Downloads
5,316
Likes
811
Rating
4.96

Aztec Pattern Debossed Planter Pot, with Drainage Holes, Drip Tray

This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…

Downloads
4,847
Likes
1,363
Rating
4.95
P
PrintablesSaganaki

Bambu labs Tool Box AMS & Embossed versions

Bambu Labs logo added to the lid with an AMS and an Embossed version. You also need 8 M3x20 bolts for the hinge and latches. Orginal design by Coffey72 which itself is a remix of a design by zx82net…

Downloads
4,343
Likes
1,132
Rating
4.89
P
Printablesmaximhuz

Tesla Optimus Bot 1.0 based on Dummy 13

Meet the Mini Optimus Tesla Bot - a one-of-a-kind figure I designed, based on the legendary Dummy 13. This isn’t just a decoration - it’s the perfect collectible for any robot fan, not just those who admire Tesla! Update: 07.02.2025 -…

Downloads
4,202
Likes
1,382
Rating
4.14
P
PrintablesMikesNoFun

Articulating Surprised Patrick Octopuss

I wanted to combine 2 cool models that I have not seen yet but I thought would be funny. Printed at 50% scale .20 mm quality Skirt adhesion no supports

Downloads
4,077
Likes
468
Rating
4.91
P
Printablesdaytrader

MK4 Hotend Fan Shield - eliminates turbulence / drafts at the nozzle caused by the hotend fan - Fan shroud - REMIX

Re-mix of the same concept from David - but with Clip-on mounting and it prints easier / lower warpage. Clip-on mounting Shroud Easy on / off without removing screws No supports needed Smooth bottom No airflow restriction only 3.6g /…

Downloads
3,968
Likes
761
Rating
4.92
P
PrintablesParallel

Haven – Case for Raspberry Pi-Based MANET (by Parallel × MorosX)

[1/27/2026] – Update (v4) Increased top SMA pass-through diameter to allow full seating of the SMA nut (hex socket compatible) Added internal thread to the previously unthreaded corner through-hole [11/29/2025] – Update (v3) Widened SMA…

Downloads
3,751
Likes
431
Rating
5
P
PrintablesTom Stanton

Compressed Air Engine

Files for the compressed air engine used in the following project: FDM printed parts: Crank Case (Front, Rear) Crank Shaft Bottle Lid Engine Mount Piston Head Cap Resin printed parts: Cylinder Head Conrod Piston Seal Mold Other Required…

Downloads
3,735
Likes
2,103
Rating
5
P
PrintablesJerryie

Subaru Impreza WRX STi Sedan (III gen) kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
3,319
Likes
758
Rating
4.56
P
PrintablesAdam L

Strong(er) cable wall hook: Remastered based on generative design

The parent design is good, but I wondered, could I use about the same amount of material, but make it stronger/better ? The answer, thanks to Fusion360's generative design inspiration and stress analysis is yes! I hope this improved…

Downloads
3,206
Likes
458
Rating
4.98
P
PrintablesRen

Drybox for 4 spools (Ikea Samla 22l based)

Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…

Downloads
3,127
Likes
688
Rating
4.83
P
PrintablesTeachingTech

Spherical port for filament dryers - Open source and parametised

Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…

Downloads
2,751
Likes
772
Rating
4.75
P
PrintablesMeister Edel

Screwdriver Ventilator & compressed air alternative Toroidal Design

You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…

Downloads
2,674
Likes
841
Rating
4.71
P
PrintablesZswickliffe

Jet Engine - working compressed air turbofan by rndmframes_printing

This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…

Downloads
2,620
Likes
495
Rating
5
P
PrintablesGoldfish1974

Godzilla Minus One - Posed (Very High Resolution)

This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…

Downloads
2,585
Likes
152
Rating
4.83
P
PrintablesADIcrafts

Small Compressed Titanic Bathtub fixed

The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…

Downloads
2,406
Likes
97
Rating
4.79
P
PrintablesScott McDonald

Cursed Pirate Gold

Inspired by some nautically themed films, suitable for resin printers, unsure about FDM

Downloads
2,373
Likes
447
Rating
4.96
P
PrintablesJonS

Creeper Clicker and Fidget (Keyboard Switch Based) with Moving Legs

Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…

Downloads
2,259
Likes
454
Rating
4.92
P
PrintablesVector3dArt

F1 Keyring - Formula 1 Logo Contoured (Raised)

F1 logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For best…

Downloads
2,251
Likes
404
Rating
4.88
P
PrintablesUseless Designs

Modern Jet Fighter (Based Roughly Off Of The F15 StrikeEagle)

I roughly based the aircraft off of the American F15 Strike Eagle.

Downloads
2,236
Likes
97
Rating
4.88
P
PrintablesMarLeo

Cursed Candle (Tealight Holder)

The hole for the tealight has a diameter of 38mm. If you have a different sized tealight, just scale it up/down! Enjoy this model and leave a photo of your print! 👻👻👻

Downloads
2,187
Likes
810
Rating
5
P
PrintablesAlexMu

Fan duct optimised for Anycubic i3 Mega

Videos FULL HOTEND: https://www.youtube.com/watch?v=FDKF7qeqDSg https://www.prusaprinters.org/prints/47884-anycubic-i3-mega-hotend-fan-box-also-mega-s-mega-x This Design fits the original Hotendbox and fan of an Anycubic i3 Mega. Its…

Downloads
2,072
Likes
155
Rating
4.55

THE 100 v1.0 - The fastest 3D printer based on a printed Frame

This version of the printer is outdated. Please have a look at: https://www.printables.com/model/572689-the-100-the-fastest-3d-printer-based-on-a-printed- Description This is THE 100, the fastest 3D Printer based on a printed frame. It…

Downloads
1,996
Likes
917
Rating
5
P
PrintablesRavenkeeper

E3CNC - Ender 3 Pro based CNC!

This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…

Downloads
1,990
Likes
906
Rating
5
P
PrintablesDylan Kirby

ZK-1001U case enclosed back

amp housing for one ZK-1001U amp, designed to use 2 m3 heat-set inserts for mounting. run wires through the bottom opening of the housing. Then complete the connections to the amp, and slide the amp into the case with pulling slack out of…

Downloads
1,805
Likes
74
Rating
0
P
PrintablesMyTechFun

Closed loop timing belt GT2 60mm dia

Closed loop timing belt GT2 60mm diameter. Suggestion to print from hard TPU (95A or 98A), no fill gaps, thicker wall if necessary. Tested on MyTechFun, torque is not too big, compared to regular belt. More details in the video. Important…

Downloads
1,801
Likes
168
Rating
4.57
P
PrintablesMatt Harrison

Open / Closed Sign

Inspired by Ikeda Yosuke's open/close sign design which relies on gravity and relatively frictionless joints, I decided to design one using planetary gears to drive the movement of the letters. An animation of the transition can be seen…

Downloads
1,790
Likes
266
Rating
4.45
P
PrintablesThe Stock Pot

Aqara T1 Recessed Housing

Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…

Downloads
1,772
Likes
383
Rating
5
P
PrintablesBar1ow

Revised Apple iPhone Magsafe and Apple Watch Charging Stand

My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove…

Downloads
1,624
Likes
185
Rating
4.7
P
PrintablesNoizie Works

Creality K1 riser The Speedbump closed and ventilated

Riser that makes room for the canbus chain to move in a safe way instead of bunching up in the corner with the chance it unlocks the extruder (it happend twice) Both ventilated and closed models for download Supports are needed for all…

Downloads
1,622
Likes
155
Rating
5
P
PrintablesFeetOffTheTable

Bench Vice - FDM optimised

CHANGELOG v1.2.1 - Carriage Bolt Edition Tweaked the Knob + Cover pieces to reduce thin walls and features that wouldn't slice properly. Still requires supports on Cover Piece 1. v1.2f - Carriage Bolt Edition turning knob added, to allow…

Downloads
1,592
Likes
804
Rating
4.5

Aquarium Background - Textured Sedimentary Stonewall - 4 x 2

The make is made of 6 panels, 3 wide by 2 tall for a final product of 24 inches wide by 16 inches tall This uses an improved panel system as compared to my previous background ( https://www.thingiverse.com/thing:3509102 ). A double sided…

Downloads
1,578
Likes
466
Rating
5