Search results: size

Sort order

7,537 models

P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Downloads
8,814
Likes
4,733
Rating
4.89
P
Printablestermlimit

Various Size Stackable Resistor Storage Box

Thanks to https://www.thingiverse.com/STTrife for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up…

Downloads
7,191
Likes
2,149
Rating
4.82
P
PrintablesWilko_SLO

Ring size Men Women

Print all with PLA. Women sizes are from 43 to 60 Men sizes are from 60 to 75 On One size of the ring is inside diameter of the ring, on the other side is Perimeter of the finger I added Men and women ring storage separately that you can…

Downloads
6,735
Likes
649
Rating
4.78
P
Printablesej.garner118

Multi-Size Hex Handle Scrapper Set

This Multi-Size Hex Handle Scrapper Set is a practical and versatile tool designed for various scraping needs. Featuring three sizes—Wide, Normal, and Narrow—this set is ideal for tasks ranging from cleaning 3D printer beds to general…

Downloads
5,678
Likes
851
Rating
4.5

🗲 Full-Size Mjolnir 3-piece screw together (Thor's Hammer) 🗲

PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…

Downloads
5,275
Likes
1,648
Rating
4.91
P
PrintablesAdam

Picture frame, various sizes

This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…

Downloads
4,668
Likes
858
Rating
4.67
P
PrintablesVC Design

Corner Clamp - 3 sizes

The Corner Clamp – Strong set includes three versions : 50 x 50 mm 100 x 100 mm 150 x 150 mm Each clamp is designed to help you hold pieces at a perfect 90° angle during gluing, screwing, or assembly. With a thickness of 20 mm and a…

Downloads
3,849
Likes
1,180
Rating
5
P
Printablessba1

Flexible/Bendable Brio rails in 3 sizes

Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…

Downloads
3,736
Likes
657
Rating
4.99
P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Downloads
3,472
Likes
1,008
Rating
4.91
P
PrintablesDainty_Things

Self Watering Plant Bulb (several sizes)

Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…

Downloads
3,343
Likes
809
Rating
4.7
P
Printablesmonev44

Modular Can Dispensers - 5 Sizes

A beverage can dispenser made of strong stackable modules that can hold any amount of a beverage you would like to have on hand. Either in your fridge or elsewhere. I wanted it for my redbull addiction, but I used parametric design so I…

Downloads
3,228
Likes
691
Rating
4.8
P
PrintablesEmkatech (Mike)

Simple Handle – 12 Sizes | Handle for M6 Screws

The M6 Handle Collection offers a robust and practical handle for M6 screws – in 12 different sizes , providing maximum flexibility for your projects. This universal design is perfect for workshop applications, mechanical engineering,…

Downloads
3,197
Likes
1,489
Rating
4.91
P
PrintablesART TOO

HANDLE - HANDLEBAR - MULTIPLE SIZES - (Tested)

4 handle sizes, perfect for your DIY projects

Downloads
2,323
Likes
1,048
Rating
4.88
P
Printablesoccupied_brain

Print in Place : Mobile Stand (Credit Card Size)

Prints Parameters : Layer Height : 0.2mm / 200um Perimeters : 6 (recommended) ~ Initially the lock may seem to be a little tight but with over a period of time and use, they will be lose enough! ~ ^This has been fixed now! Left the…

Downloads
2,143
Likes
424
Rating
4.89
P
Printablesdziobu

LEGO Duplo Train track: straight elastic (full size)

Easy to print, tought and compact construction. Need a little of support (just for hook - don't use support for holes). (it's the same as https://www.thingiverse.com/thing:3371739 ) Category: Construction Toys

Downloads
1,993
Likes
356
Rating
4.97
P
PrintablesPatrik

Multiboard pegboard click hooks in various sizes

When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…

Downloads
1,870
Likes
230
Rating
5
P
PrintablesPatrik

Multiboard bottle holders with open bottom in various sizes

Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…

Downloads
1,645
Likes
337
Rating
5
P
PrintablesDarius V

Modular Sliding Shoe Size Ruler (EU/US)

This 3D printable shoe sizer features a two-part sliding design that measures foot length in both EU (left) and US (right) sizing systems. The base unit covers up to EU size 27. For larger feet up to EU size 46, simply print the optional…

Downloads
1,407
Likes
760
Rating
5
P
PrintablesAndoAndoAndo

3D Printable Garages for Hot Wheels (and similarly sized car toys!)

I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…

Downloads
1,379
Likes
271
Rating
5
P
PrintablesMetikumi

Functional Washers for PETG/ASA – Various Sizes – LR Basics

This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…

Downloads
1,373
Likes
252
Rating
4.8
P
PrintablesFloatingCam

Oversized Armchair for Sylvania Family and Calico Critters

Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.

Downloads
1,337
Likes
244
Rating
4.89
P
PrintablesYiftah Sagir

king size joint case

joint case with cap instolled print in place. cap fixed to main body in 1 file with no supports. Satisfying feeling with opening and closing the cap. recomend printing with brim, after cap is finished is possible to crank up the speed as…

Downloads
1,323
Likes
136
Rating
5
P
PrintablesAndrej

Cannagar, Thai-Stick, Blunt Rolling Tool (4 sizes)

If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl changelog: (19.07.2025) - added (XS_S_M_L)_CLIP_v1.1 with more tolerance You…

Downloads
1,218
Likes
124
Rating
5
P
PrintablesMiguel M.

Simple Compact Drilling square/guide (Multiple sizes)

This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…

Downloads
1,129
Likes
491
Rating
4.95
P
PrintablesDavid155

Mini Imperial and Metric Screw Sizers

Mini versions of the Imperial and Metric Screw Sizes without the part on the right. Remix of kmccon design.

Downloads
1,123
Likes
269
Rating
4.85
P
PrintablesPatrik

Multiboard tool holders in various sizes

Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…

Downloads
1,072
Likes
208
Rating
5
P
PrintablesPatrik

Skadis bottle holders in various sizes

IKEA Skådis bottle holders in sizes from 15mm to 120mm. The bottle holders uses the flexible and strong Skadis generic connector . Just attach a Skadis generic connector to your Skådis board and then mount the bottle holder on the…

Downloads
1,037
Likes
213
Rating
5
P
PrintablesJakub Kříž

Compact Capsule Filler (00 size) with Credit Card Mixture Dispenser

Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…

Downloads
1,020
Likes
109
Rating
4.8

Box Size M

Hey there :) - For this project you need a drop of superglue and a 6cm filamentstrip - Step 1: Load the files into the slicer Or you use the gcodes , just look at the given requirements Step 2: Correct the orientation of the models The…

Downloads
960
Likes
288
Rating
4.91
P
PrintablesMetikumi

Disposal Box with Print in Place Hinge – Various Sizes

I created a small disposal box with various diameters and container heights with this design. The lid with the hinge is printed in place and screwed onto the container. There are no supports required for this print, and I recommend…

Downloads
828
Likes
239
Rating
4.88

Carabiner Size S

Hey there :) This Carabiner is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without requiring supports when printed. It is perfect for keychanes or to…

Downloads
803
Likes
119
Rating
4.5
P
PrintablesHopeinformer

TIG Cup Size Tungsten Stick-out Gauge (US)

A quick and simple way to set your tungsten stick out length. I wanted a quick way to set my tungsten stick out length each time so I quickly modeled this in Blender and sliced it. Should go without say but to point out the obvious…

Downloads
783
Likes
82
Rating
5
P
PrintablesToby3D

Ikea Samla Clips Labeled ALL SIZES

Having a variety of Samla Clips I decided to label them with the matching box volumes. Also extended/shortened all clips to 3cm width - Make sure you use the correct print orentation to avoid overhangs - Remixes of the following models…

Downloads
739
Likes
90
Rating
4.91
P
PrintablesMetikumi

Round Corner Templates in a Full Range of Radius Sizes

I designed an extensive set of round-corner templates for woodworking. They can either be used to mark corners with a pencil or as a template with a flush-trim bit. There is a wide range of radius sizes from 5mm up to 200mm and 0.5" to…

Downloads
693
Likes
185
Rating
5
P
PrintablesGlennovitS 3D

Cable Organizer Ties (Super easy - 150+ sizes!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
647
Likes
234
Rating
4.95
P
PrintablesStefan Huber

2 mL Tube Rack: Secure Eppi Storage Solution in various sizes

Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…

Downloads
646
Likes
91
Rating
4.67

Carabiner Size L

Hey there :) This Carabiner is the large version , there is a small and medium as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…

Downloads
614
Likes
102
Rating
4.86

Piping Bag Tips XL Size 🎂

My Rotating Icing Stand to go with it! → https://www.printables.com/model/280087-revolving-cake-stand-for-icing-serving-30cm-12-inc I also have a regular size set here! → https://www.printables.com/model/290093-piping-bag-tips How to use:…

Downloads
605
Likes
73
Rating
4.75
P
PrintablesSdewe

Removable shopping cart token in different sizes

UPDATE 1: PLA is working better!!!! UPDATE 2: Funktioniert aus irgendwelchen Gründen bei manchen Läden ohne Probleme, bei anderen aber überhaupt nicht. Printing instructions: 1. best to print in PLA (PETG could also work). 2. 100% infill…

Downloads
584
Likes
57
Rating
5
P
PrintablesObe_Design

Resistor Lead Bending Tool - Dual Size Leg Forming

A handy dual-sided resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes two bending options: 6.3 mm spacing slot – ideal for standard 1/4W resistors and common Arduino projects…

Downloads
576
Likes
218
Rating
4.8
P
PrintablesJohnGames

Prusa Mini Multi Nozzle Size and Material Linear Advance Calibration

The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…

Downloads
572
Likes
55
Rating
5
P
PrintablesMetikumi

Large Flower Pot with Saucer in Various Sizes

Introducing a traditionally designed large flower pot complemented by a matching saucer, this creation is a blend of classic aesthetics and practicality. The pot, characterized by an octagonal shape with softly rounded corners, boasts a…

Downloads
534
Likes
128
Rating
0
P
PrintablesJoeRixon

Stable flyer V + Winglets & Rudder (75%size)

(Have a look at the ‘ Stable glider V5 ’ It should glide much better.) Differences: Added Winglets and a rudder, also scaled down to 140mm so the model is quicker to iterate and print. Changes made: Thinning two channels on the wingtips…

Downloads
494
Likes
62
Rating
4.5
P
PrintablesMetikumi

Cable Tidy Spool, for ⌀3.0mm Cables, 128 Sizes

I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…

Downloads
459
Likes
100
Rating
5
P
PrintablesMetikumi

Flower Pot with Spiral Pattern in Various Sizes

I'm thrilled to present my latest design, a round flower pot that elegantly showcases a captivating spiral pattern swirling around its sides. It's not just an ordinary pot; it's a statement piece that combines aesthetic appeal with…

Downloads
456
Likes
112
Rating
5
P
PrintablesKatarn

Literally a Can Sized Trash Can

Trash can to install in any can holder of any size. There are several sizes available to choose the one that best suits your needs, is not the one you want? Let me know in the comments and I'll be happy to prepare a new size for you. Did…

Downloads
455
Likes
136
Rating
4.75
P
PrintablesAdam

Clicker Remix - Same Click, Larger Size

This is a remix of SHR3D.eu's Clicker with a larger main body so that you can easily hold it and operate it with one hand. The functional clicker part is unchanged. Update: I've uploaded a new version with a solid “clicker activator” (see…

Downloads
454
Likes
58
Rating
4.6
P
PrintablesJakub Kříž

Strong Corner Brackets - multiple variants and sizes, easy to print and free

Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…

Downloads
433
Likes
193
Rating
5
P
PrintablesMetikumi

Round Flower Pot with Aligned Scale-Like Pattern in Various Sizes

I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…

Downloads
410
Likes
67
Rating
5
P
PrintablesAdam

Pipe flange (escutcheon plate) in various sizes

This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…

Downloads
403
Likes
40
Rating
5
P
PrintablesPhilip

Oversized Nespresso VertuoPlus Replacement Drip Tray

Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…

Downloads
395
Likes
23
Rating
5

Carabiner Size M

Hey there :) This Carabiner is the medium version , there is a small and large as well. It is locked through tention and thus distributes the force through both arms. Its interlocking parts are designed to resist shear forces without…

Downloads
376
Likes
55
Rating
5
P
PrintableseCrowne

Wall mount compatible with LEGO(r) car models (tilted for viewing), with proper stud sizes that fit snugly

Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…

Downloads
375
Likes
60
Rating
0

Regular + XL Size Injector nozzles for piping bags

These turn any plastic baggy into a piping bag in 2 seconds. ~ Full Piping Tip sets ~~ Regular size: https://www.printables.com/model/290093-piping-bag-tips XL Size: https://www.printables.com/model/292317-piping-bag-tips-xl-size

Downloads
372
Likes
61
Rating
5
P
PrintablesTantalus

Amiga 500 Mini (A500 Mini) - Miniature Full Size Floppy Disk

No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…

Downloads
368
Likes
71
Rating
5
P
PrintablesOutbacky

Dyson Outsize (v11) Trigger Lock Switch - Removable v2.0

I wanted the trigger lock switch by Ondrashek for my Dyson Outsize, so I remixed it with crash720's trigger lock model to clip on and fit snuggly around the handle of the Outsize and be able to switch the trigger when required. I found…

Downloads
353
Likes
22
Rating
0
P
Printablesstikyworld

Cactus flower pot - small size

A small, nice and quick pot for your lovely cactus or other small plants. Happy printing.

Downloads
256
Likes
22
Rating
5
P
PrintablesBob the Builder

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…

Downloads
240
Likes
50
Rating
5
P
PrintablesFizzio55

Makeup brush holder - two sizes

At the request of my wife for something useful to put her makeup pens and brushes in to, I loaded up the trusty Tinkercad and came up with this design. Initially, it was a three hole container but not sufficient for her needs. Hence the 4…

Downloads
239
Likes
54
Rating
5
P
PrintablesMike81622

PVC pipe bracket / holder (different sizes)

I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…

Downloads
239
Likes
66
Rating
5
P
PrintablesTperroneDesign

Oversized Wearable Award Medal

This is an Oversized Wearable Award Medal that you can Customize with different Medal Inserts. The Medal Chain can be printed in Gold, Silver, or Bronze. The Medal Insert can be printed in different accent colors for 1st, 2nd and 3rd. The…

Downloads
231
Likes
98
Rating
5
P
PrintablesE3De

Spruttig Hanger in Doll Size

Hanger in doll size inspired by the IKEA Spruttig hanger. Can also be used as a jewelry hanger. Scale 1:6, without supports, material PLA, layer height 0.2 mm. This hanger fits on clothes rack, which you can find in my Printables…

Downloads
222
Likes
62
Rating
4
P
Printablesfox

Handle - All Purpose, Four Sizes

Creator:guppyk https://www.thingiverse.com/thing:4619895

Downloads
211
Likes
42
Rating
5
P
PrintablesCraftswoman.cz

30 Christmas cookie cutters in 3 sizes | 30 Vánočních vykrajovátek ve 3 velikostech

A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell fish heart santa skate snow glove snowman tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…

Downloads
187
Likes
38
Rating
5
P
PrintablesKladrie

DuPont : a cromulent connector cover - simpler, smaller, better, faster, in all sizes.

To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…

Downloads
186
Likes
35
Rating
5
P
PrintablesCraftswoman.cz

30 Christmas cookie cutters in 3 sizes | 30 Vánočních vykrajovátek ve 3 velikostech

A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: candle candy church comet glove heart pig present snowman sock – Czech – Kolekce 30 vykrajovátek na vánoční…

Downloads
182
Likes
39
Rating
5
P
PrintablesSYNCPRINTING

Full Size Drum Kit: Floor Tom 1

Here I have made a Full Size Floor Tom to finish off my Full Size Drum Kit, easy to print with all parts not needing supports plus all parts can be printed on a prusa mk3, how awesome is that!! No need for massive printers that no one has…

Downloads
179
Likes
51
Rating
0
P
PrintablesCraftswoman.cz

30 Christmas cookie cutters in 3 sizes | 30 Vánočních vykrajovátek ve 3 velikostech

A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell cookie hat moon ornament snowflake star tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…

Downloads
174
Likes
29
Rating
5
P
PrintablesTWB

Minimalistic Card-sized Nintendo Switch Game Card Holder

Suggested print settings for the Main Body : Layer height 0.2mm. Infill 20%. Perimeters: 5 (for strength and aesthetic). No supports are needed. Suggested print settings for Cover : Layer height 0.2mm. Infill 20%. Perimeters: 5 (for…

Downloads
166
Likes
24
Rating
4
P
PrintablesAngel R.

Plain Lighter Cover for Bic (Standard size)

Hello all, I have an Ender 3 v1.0 for a long time now and just finally got the time to learn to model things for printing. Picked up Fusion360 and decided to go and model things to learn more. So I went ahead with a plain lighter cover…

Downloads
149
Likes
11
Rating
0
P
PrintablesTeslaactions

Flexible Hexagonal NASA Chainmail Tie sized for Prusa Mini

remix of a tie by @maker81, made from chainmail. updated in the slicer to fit.

Downloads
145
Likes
27
Rating
0
P
PrintablesNozzle

9mm Luger Cartridge 9x19 Patrone Mega Size Model for Education

A multi-part model of a 9mm Luger cartridge with detailed construction. Primer, case, bullet, bullet core and powder charge. Ideal for decoration and education.

Downloads
144
Likes
44
Rating
5
P
PrintablesFalcon

Ring Sizers (Letters F-Z)

Ring sizers in whole sizes F-Z. The letters are cut .2 mm deep, allowing you to do a colour change on the second to last layer to highlight the letters, or do a colour change for the last layer only to highlight the letters. Print time…

Downloads
141
Likes
13
Rating
5
P
PrintablesMetikumi

Heptagon Plant Saucer in Various Sizes

Introducing our Heptagon Plant Saucer, a perfect blend of functionality and geometric elegance. Crafted with a classic terracotta style and a flat rim, it offers perfect geometries at every corner. The bottom features an intricate pattern…

Downloads
131
Likes
24
Rating
0
P
PrintablesMetikumi

Modern Quadratic Flower Pot in 192 Sizes

I designed this modern flower pot with a clean, timeless shape. The subtle 5º inward angle on the sides adds an elegant taper, making it more visually appealing than pots with straight walls. The top rim stays intentionally thin for a…

Downloads
120
Likes
36
Rating
0
P
PrintablesDavid Harvill

TZ Tape Caddy for Multiple Sizes

This a cartridge caddy for Brother P-Touch TZ and TZE tapes. It has been modified to have cartridge slots of two different sizes. The OpenSCAD file allows you to customize the number of slots and their respective sizes. This all sits on a…

Downloads
116
Likes
12
Rating
5
P
PrintablesCreative layers

BEST BENCHY TOY FOR KIDS SIZE FITS MOST MEDUIM TO LARGE 3d printers x200 fits!!

Here is bench x200!! I recommend slow printing speed any filament Enjoy!!

Downloads
88
Likes
8
Rating
0
P
PrintablesCSH40Design

Rugged Box Parametric And Print In Place (premade sizes)

This model is designed for in-place printing, featuring a conic joint structure in the hinge that ensures smooth and easy movement of the joints. For optimal results, print with PETG material, using 15% structural infill and no supports.…

Downloads
88
Likes
19
Rating
0
P
PrintablesMetikumi

Webbing Buckle in Various Sizes with Fusion360 Design

I've engineered this webbing buckle to offer enhanced grip on webbing bands, eliminating any loose ends. The design is versatile, compatible with a broad spectrum of webbing bands. It's crafted to stay securely in place while being…

Downloads
85
Likes
16
Rating
0
P
PrintablesIan Foulds

2 AAA battery pack minimal size

My son was designing a model plane that flies on a string. He needed a battery pack that fit into a 24mm circular cavity. I really liked msatbsx's modular design, it is great and flexible to work with. However it was a little too big to…

Downloads
83
Likes
6
Rating
0
P
PrintablesThorb

Part B adapter to connect two of Niklas XL Printer resized HSW Wall Grids

As mentioned above don't use the remix as stand alone model but use it to connect already printed parts Thanks to Edwin Eefting @EdwinEefting_24240 Xander @Xander_424401 You can customize…

Downloads
82
Likes
6
Rating
0
P
PrintablesSTRIKER7720

Airsoft delayer chip Size L - Cut version

Original helped my feeding issues but caused fps to drop on full auto. Removing the pickup side fixed that for me. May require a bit of trimming to fit.

Downloads
78
Likes
8
Rating
0
P
Printablesmaxwxyz

Ryobi SwiftClean Mid-Size Hose Rinse Tool

Provides hassle-free hose cleaning of the Ryobi SwiftClean Mid-Size Spot Cleaner. It rinses left behind debris for hassle-free hose maintenance by using the already abailable cleaning solution inside the spot cleaner. Just attach this…

Downloads
77
Likes
2
Rating
5
P
PrintablesSYNCPRINTING

Full size Drum Kit: NamePlate Mod

Hello!! Here I have made a mod for my drum kit that allows you to add a customisable Name Plate to the “Rack Tom 1”, "Rack Tom 2" and the “Floor Tom 1” of my full size drum kit, this is a very easy mod that makes the kit pop with…

Downloads
70
Likes
28
Rating
0
P
PrintablesBooks

Mustache Coin (Novelty, US Quarter, and Euro Sizes Included)

Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .

Downloads
67
Likes
8
Rating
0
P
PrintablesSheepMe!

Photo Frame for Polaroid i-Type and 600 film size

Model Photo frame for Polaroid i-Type and 600 film size. Dimensions The photo frame size is 118 mm x 99 mm x 3 mm (LxWxH). The post size is 109x34x7 mm. Printing Any solid filament, such as PLA, PETG, etc., is suitable as a filament. Both…

Downloads
63
Likes
11
Rating
0
P
PrintablesQuick Making

Chain link Jumbo size 80mm link

This is a customizable chain link model designed for easy assembly without the need for screws or other fasteners. Each individual link is 80mm in length, making it perfect for larger projects where strength and size are key. The links…

Downloads
60
Likes
40
Rating
0
P
Printablesformula400me

Bobbin Holder - L Size - Commercial Embroidery - Melco

This is a bobbin holder for a size L commercial embroidery machine bobbin. It holds about a dozen pre-wound bobbins. I printed the teal colored one in PETG and the files posted are for a PLA version. Either would be fine. Support material…

Downloads
56
Likes
5
Rating
0
P
PrintablesClamikra

Magnetically attached neck and base for Full Sized Voronoi Head

I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…

Downloads
54
Likes
6
Rating
0
P
PrintablesWisersDulux

Decora sized light switch- single switch, double size

Fits ok- great to print in flame suppressing material

Downloads
54
Likes
4
Rating
0

Amateur Radio License Frame for FCC Print and cut size (5 1/4 x 6 1/2 inches)

Openframe.stl is frame only (~2 hrs to print). You just cut cardboard back the outersize of frame and glue to frame. You can then paste your license print to the cardboard and there you have it using minimal filament (pla) hamlicense…

Downloads
51
Likes
8
Rating
0
P
PrintablesMBLX

Wall / Door hook / hanger (Power Strips normal size)

Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.

Downloads
47
Likes
4
Rating
0
P
PrintablesThorb

odd box size of 310mm x 150mm for my kitchen drawer

quick remix of the excellent “catch all trays project” (https://www.printables.com/de/@HD_218561) for some odd dimensions

Downloads
46
Likes
9
Rating
0
P
Printablesakamaka

PrusaXL - Dual Nozzle Size Marker

PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type

Downloads
46
Likes
4
Rating
4.75
P
PrintablesSan G Dice

D20 Ice Cube Holder (42mm ice cube, can be resized)

I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…

Downloads
37
Likes
1
Rating
5
P
PrintablesMetikumi

Large Seven-Point Star Frames - Many Sizes with Parametric Fusion360 Design

I designed this simple seven-point star frame as an ornament with various uses: The variants with one hole can be used to hang them as decoration, but there are also variants with no holes - if you like to glue or tape them to a surface.…

Downloads
36
Likes
2
Rating
0
P
PrintablesMetikumi

Large Nine-Point Star Frames - Many Sizes with Parametric Fusion360 Design

I designed this simple nine-point star frame as an ornament with various uses: The variants with one hole can be used to hang them as decoration, but there are also variants with no holes - if you like to glue or tape them to a surface.…

Downloads
34
Likes
1
Rating
0
P
PrintablesGrhmhome

Piccolo sized Triotune

This is a 3 string instrument I designed that is similar to a soprano ukulele, but even smaller. These models will fit on a Prusa Mini+ with minimal supports needed. I recommend printing the body facing up with using supports only at the…

Downloads
33
Likes
4
Rating
0

Nozzle Size Indicator for Prusa XL - New Version

Voici des indicateur de taille de buse pour votre imprimante Prusa XL, La nouvelle version se clips sans à avoir a détaché le tube guide fils.

Downloads
31
Likes
9
Rating
0