922 models
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Youtooz released a model of the Purple Guy Sprite from FNAF a while ago, and I kinda wanted to try to recreate it. So I recreated it, and it looks pretty good. The eyes are off, but I think its ok. Please don't sell this, as it basically…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
After receiving a Creality Sprite Pro extruder to upgrade an Ender 3 Pro printer, I found that my touch sensor was hanging just below the hot end nozzle. I found several models via Printables and Thingiverse but could not find one I…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Soot Sprites (in the style of the Barrel of Monkeys game) Characters seen in Studio Ghibli's Spirited Away as well as My Neighbor Totoro Double-sided (eyes on both sides) These can be played with like Barrel of Monkeys, or used as…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I recently upgraded an Ender 3v2 with linear rails on all axes. However, the X-Axis I purchased from Amazon ( https://www.amazon.co.uk/gp/product/B09M73XRBH ) secures the rail to the top of the X 2020 bar and not the front as a lot of…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Creality CR-M4 sprite extruder plate. During shipping of my printer from a friend, the plate got damaged and bent. Since I can't find where to just buy it, I made it taking into consideration the original one. Left space for airflow. Can…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…
The Zero Point Sprite from Fortnite. This is my first actual handmade model sculpted and everything so hopefully you guys like it and yeah thank you for the support. Portions of the materials used are trademarks and/or copyrighted works…
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…
The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…
This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…
Creality Sprite Extruder Model
This cute water sprite is small and hand held. I tried to make an air sprite but I just can't get it correct but I feel like if you print this in white it would work. The eyes can be painted or done with an MMU I personally used paint. If…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…
Bracket for the free screw hole on the right Side. Only mounted with one screw. For the G-Sensor of the Sonicpad
This took a while, but I believe it's done now, A complete Spine Chain Kit for Ender 3 V2, with a sprite pro upgrade. There are multiple variants for the link's, and mounts, depending on how much movement you want. Be reminded that if you…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Check out also my Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder To silence the fan even more, print my Snap-On 5015 Blower Silencer Design: I have created this model with the following considerations:…
Seen that people complained about thin wall on original design so I have added strenghtening wall increasing layers to 3 instead of 1 that could be faulty. Printed this with 0.4 nozzle and 100% infill
I made a water sprite and I wanted him to have a buddy.
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and…
This design is an adapter for the ADXL345 Accelerometer to be mounted on the Creality Sprite Extruder of the Ender 3 S1. There are two versions of the adapter: The first version requires 4 M3 inserts, 2 for mounting the ADXL and 2 for…
An optimised part cooling duct for a Creality S1/Pro/Plus using the Creality Sprite extruder to maximise airflow and reduce back pressure on the 5015 fan. It is a remix of the hero me gen 7 single 5015 fan duct to make it fit for a…
Creality Ender 3 S1 Creality Ender 3 S1 Pro High Flow Modular 5015 cooling duct sprite extruder This a more refined version of the Ender 3 S1 Twin Jet 5015 Fan Duct that is a little easier to print (less supports). It also doesn't require…
This cable drag chain is a remix of various models listed in the “original models” section to fit the Sprite Pro's fat ribbon cable and heated bed cables on an Ender 3 V2. Here are the number of models that I've printed and used to manage…
I wanted a way to keep the ribbon cable on the Sprite Pro extruder raised off the bed and pointing to toward the back of the printer so I slapped this together. Get your Prusameters… Post your Makes! If you like this project, please don't…
The model supports the connection and rotation of the cable for the Creality Sprite Extruder Pro for use on an Ender 3 with a linear rail. Supports are required. If you would like to buy me a cup of coffee .
holder for a reverse-bowden fitting for the creality sprite extruder. with this holder the filament roll can be placed sideways or in a dryer. petg → 250/70 celsius → 0.12mm layer
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
This mount goes onto the Sprite extruder, and makes the CR touch inline of the nozzle. I.e it makes the y offset of the probe 0. New offset is- (-55.5 , 0) You will have to update the firmware with the new offset values. Also, this model…
The ribbon twister should be printed with the cable entry side on the bed without supports. Cable clips will possibly need a raft.
The legendary boss sprite. I printed it in red and then painted the black and white sections. It can be printered multicolour but would take about 2 days if you print the same size as I did.
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
A new take on the ribbon cable strain relief for the Creality Sprite Extruder. ~6 grams in PETG. See it in action here: My print settings: PETG (print in the hotter range of your material for good layer adhesion, the overhangs are mild on…
This is a replacement for the stock Sprite cable management that removes the stress and potential cable fatigue from the x-axis movement. Like the originals, it bends the cable to the left and routes it across and down the outside of the…
CREALITY SPRITE SONIC PAD ENDER 3 S1 S1 PRO X AND Y AXIS ADXL345 G-Sensor Mount remix X axis mount more rigid and mounted permanently, sensor screw holes enlarge to fit m3 screw. To mount on sprite extruder. may need slightly longer m3…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/259877-ender-s1-sprite-extruder-cr-touch-mount. Redesigned it for my Ender 3 V2 with sprite extruder. Reasons for remix An even slimmer verision of…
I made a new fixture for the extruder and ABL sensor that fits the Ender 3 S1 Pro. The original 4010-part cooling fan is used to cool the cold end now. You have to adjust the ABL sensor offset before using this mod. X-axis offset: -47.7mm…
This is accurate enough for you to make mods for the sprite Mounting wheel spacing may be incorrect This file has was made starting with an extruder model ripped from one of the Ender 3 CAD files. The mounting wheels are from the same.
I was in need of adding a sprite extruder to my Ender 5 Plus. After looking at what everyone else did, I realized I can just simply add a back plate to hold the GT belts and remove the triangle piece that was coming from the left side of…
Add a touch of magic to your collection with this adorable Cute Forest Spirit . Featuring a rounded body, oversized glossy eyes, tiny arms, and charming fantasy details, this character is designed to bring warmth and personality to any…
This allows you to cool the part using 5015 fans.
Bring this adorable block-style creature to life with your own color scheme! This 3D model features an oversized head, big expressive eyes, small horns/spikes, teeth, and a fun cartoon-inspired design that makes it a great display piece…
Add a touch of magic to your collection with this adorable Cute Forest Spirit . Featuring a rounded body, oversized glossy eyes, tiny arms, and charming fantasy details, this character is designed to bring warmth and personality to any…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
sprite extraction crate
NEW VERSION 3.1 with recessed hex nuts and more clearance for CR-Touch (STL and OBJ formats). 5015 fan upgrade mount for Ender Sprite Extruder Pro using stock screws. There are a few similar designs to this, but I took a little bit of the…
I wanted to move my probe to the right side of my hotend to make room for the noctua fan mount I'm designing for the left side. I also wanted it to sit in line with the Y-Axis of the printer nozzle. Offsets for the prove are X: 39 and Y:…
I designed this originally to work with the Modder Board. I have added the bracket for stock board users. Please let me know of any clearance issues. NOTE - You will need to download a model to push out the X endstop. I will work on a…
I've seen some comments about the issues of the provided supports and I was requested to post up my file that I've had success with. This orientation and support placement has always ended successfully on my Mars Pro with the smallest…
Update: v2 Offset mod for Touch Sensor added. (Last photo) Offset Values added. Setup: You can find pdf document in the attachments for this. Printing: You have to use PETG or a heat resisdant filament to work properly. You can choose any…
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup. Note that one of the parts listed is an M10-0.75 x 5mm heat set…
A simple 2in1 mount for an ADXL345 on the Creality Ender 3 S1 / Plus / Pro or all Sprite extruders / Pro.
0.12 mm layer PLA WORKS FINE no supports no infill
Was really happy with tsuga's backplate for the Creality Sprite Extruder, that fixed all my bed leveling issues... But, I wanted a more silent hotend fan than the standard one. Went with the following fan: WINSINN 5015 Fan 24V no supports…
~ UPDATE: 03/01/2024 ~ The amazon links provided below are my affiliate links, if you use those links to buy your hardware you will also be directly contributing to me as well. Please consider using those links if you need to buy the…
Basics & Demo This display case tightly fits onto the Taurus cooling duct, version 2 and up. You can find this cooling duct here: https://www.printables.com/model/511962 If you're not already running a Taurus cooling duct that you are…
AU Cooling Duct NEW UPLOAD 14/05/2024 KLIPPER G-CODE FOR CHANGING BL-TOUCH PLACEMENT [bltouch] sensor_pin: ^PC14 control_pin: PC13 x_offset: -46.8 #Was -32 before new placement y_offset: 0 #Was -40.7 before new placement #z_offset: 0…
PLA or PET-G should be nice If use ABS make sure that bearing and lever axis housing dimensions will be right (download STP file and edit it you need) 0.4 line width 0.2 layer height 5 perimeters of more 10 top and bottom layers or more…
the gem zero point sprite
I've constructed a gantrymount for the Ender 3 S1 cable chain to fit the chain to the Ender 3 V2 equipped with the Extruder from the S1. The amount of printed chain parts you need are the same(41x) . If it is to tight for you you can…
After adding the Creality Sprite Extruder Pro to my printer I needed something to keep the ribbon cable from twisting so much as the extruder moved through the print cycle. I really liked the cable guide by Roland Deschain right here but…
This is a 5015 circular fan duct upgrade to Creality's ender 3 S1/Pro or Creality's Sprite extruders. Here is it in action: ChangeLog -Fixed mounting Issue -Better Airflow -Added new mounting points for more rigidity -added overall…
After upgrading my Ender 3 Pro to the Sprite Pro hotend/extruder combo, I wanted to find a better way to support the cable and keep it out of the way. All the solutions I found out there had the ribbon getting mounted to the original…
A simple bracket to be able to easily read height to bed from a Sprite Extruder on an Ender 3 S1 Pro or Plus. Stop using the "paper trick!" With an Allen wrench, this allows simple removal, installation, and some height adjustment for the…
Print in PETG, ABS, or Resin. I used tree supports above build plate. You can also use a brim if you need it. The original duct had great fitment and clearances all I did was stretch the ducts to better cover the hot-end. as a proof of…
Ender 3 cable clip for sprite extruder Print Settings Supports: No Resolution: 0.2mm Infill: 20% ------ Happy Print to the whole community :)
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…
Ever since I saw the Creality Sprite pro Extruder I believe its PERFECT for a corexy printers . Here is my work in progress mount on my ender 6. I tested it and its working great! I believe It can be improve greatly with people having…
After many print fails and endless adjusting of the standard direct drive extruder on the Sovol SV05 I finally gave up and bought a Sprite extruder. It's almost a direct fit except for the fact that in the Ender 5 Pro and SV05…
– Update -- V2 now available here with improved design and swoppable face plates https://www.printables.com/model/1261604-sprite-nova-v2-customisable-sprite-extruder-shroud I was not satisfied with the fan duct options available for the…
New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a…
the king sprite you can get in the game fortnite
This is a CR-Touch mount to be used on the Sprite Extruder variant that comes with the Creality Sermoon V1. It may fit other variants of the Sprite Extruder too. Offsets: X: 34mm (or -34mm, depending on firmware and extruder orientation)…
