Search results: stealthchanger

Sort order

96 models

StealthChanger Tool Changer

Not just for the StealthBurner, The StealthChanger is a tool changing mechanism for the Voron V2.4 but easily adaptable to other flying gantry printers Currently supported tools are the StealthBurner, DragonBurner, RapidBurner, and…

Downloads
578
Likes
227
Rating
4.5
P
PrintablesDavidGray

Stealthchanger Logo Test Chip

Printing poker chips was my goto method for calibrating my XY nozzle offsets. This chip can be used to see multiple offsets at once. Print the main body with T0 and all other parts with different tools.

Downloads
433
Likes
34
Rating
5
P
Printablescjackson234

StealthChanger - Stealthburner minimal docks (AKA Happy Crab docks)

I found that you don't need the vertical supports if you use the crossbar with stealthburner. All credits go to the team as this is a cosmetic change.

Downloads
430
Likes
99
Rating
5
P
PrintablesCraig Jr Easter

LDO Nitehawk Umbilical Clips for Stealthchanger, Tapchanger, etc

I designed and use these for my Nitehawk-SB based Stealthchanger build. Print from ABS/ASA or other high temp/strength materials. Uses two 2mm wide zipties for indirect tensioning. Allows for two 1mm lengths of piano wire to run through…

Downloads
343
Likes
68
Rating
5
P
PrintablesWilliam

Dragon Burner StealthChanger 6 mag.

Dragonburner cowl with 6 magnet holes to hold the tool head in place when changing tools. It uses all the same parts as the official Dragon Burner; the only difference is that the cowl is replaced with my model, along with the dock base,…

Downloads
292
Likes
45
Rating
5
P
PrintablesWilliam

StealthChanger Dragon Burner Modular Dock 6 Mag.

Modular dock base with 6 magnet holes to help hold the tool head in place. It uses all the same parts as the official DSD modular dock; the only difference is that Base.stl is replaced with my model, along with the dragon burner cowl, of…

Downloads
273
Likes
40
Rating
5
P
PrintablesSputnikOC3D

LGX Lite & WWG2 - Mello Fly SHT-36 Max V3 / EBB36 Style Toolboard Mount - Voron Stealthchanger

Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…

Downloads
265
Likes
28
Rating
0
P
PrintablesKEKO

Stealthchanger Screw Docks

As the name suggests these docks use screws to hook on, they are compatible with Dragonburner and Stealthburner. The old cowls can be reused, you just have to put two spacers and longer screws with nuts on the Toolheads. For the parking…

Downloads
260
Likes
60
Rating
5
P
Printablescjackson234

StealthChanger - Anthead minimal docks

I cut down the anthead docks so that you could see more of the extruders.

Downloads
220
Likes
70
Rating
0
P
PrintablesKhalid 3D Works

Stealthchanger / Toolchanger Test Chip

Stealthchanger / Toolchanger test Chip. This is multi parts so you can color them easily. Available in .stl, .obj and .3mf files.

Downloads
176
Likes
14
Rating
0
P
PrintablesDavidGray

Stealthchanger Fysetc Shuttle Guide

Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.

Downloads
174
Likes
47
Rating
5

Voron 2.4 stealthchanger umbilical clips

Checked a few models online, none quite fit my idea perfectly and most where a bit bulky for my taste. I took some ideas and modelled these to fit tightly and be as small as possible while sturdy enough. Print the parts in the orientation…

Downloads
167
Likes
21
Rating
5
P
PrintablesTooks

EBB36 + WWG2 Mount w/ Spring Steel Slot (for Stealthchanger)

A mounting solution for use with WWG2 extruder & EBB36 toolboard, remixed from SputnikOC3D's model for the SHT36 Max. This mod offers more clearance around components on the back of the EBB36 that were previously clashing with the printed…

Downloads
164
Likes
22
Rating
0
P
PrintablesVasily

Bearing Type Spool Holder with StealthChanger logo

- added StealthChanger logo - increased body length to support spools up to 80mm wide - for 3mm acrylic and 3mm foam

Downloads
162
Likes
39
Rating
4.67
P
PrintablesKhalid 3D Works

Stealthchanger / Toolchanger Voron Design Calibration Cube

Stealthchanger / Toolchanger Voron Design Calibration Cube This is multi parts so you can color them easily.

Downloads
152
Likes
20
Rating
5
P
PrintablesSputnikOC3D

SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover

SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover Modified from an EBB36 design, specifically for the MELLO Fly SHT36 Max V3 board on my Umbilical toolboard mount - pictured - for WWG2 Extruders

Downloads
151
Likes
29
Rating
5
P
PrintablesJunior Gaming

StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2)

This is a mount for my StealthChange setup. This will fit on a WWG2 with a EBB36, it also clears the OptoTap. There's also a hole for a spring steel support for the umbilical. You'll need 2 M3 heat insert (Standard Voron M3s M3x5x4mm) to…

Downloads
139
Likes
24
Rating
5
P
PrintablesTooks

EBB36 V1 + Orbiter 2.5 Mount w/ Spring Steel Slot (for Stealthchanger)

A mounting solution for use with Orbter 2.5 extruder & EBB36 V1 toolboard, remixed from LDO's Universal Mount to suit 36mm pancake motors This toolboard is designed for use within the Draftshift Design Stealthchanger project, specifically…

Downloads
137
Likes
29
Rating
4
P
PrintablesMauxx91

Sexball probe rest mount for Stealthchanger calibration

Just a resting point for the sexball, since it cannot stay in place when printing since it will interfere with the toolhead. it has phantom faces, 0,01mm of depth that slicer will ignore for printing, but let you color the Voron logo and…

Downloads
109
Likes
40
Rating
5
P
PrintablesLimitlessPathX

Anthead Backplates for StealthChanger

Anthead Backplates for StealthChanger with cable funnel ST,HF,UHF

Downloads
107
Likes
16
Rating
0
P
PrintablesVasily

StealthChanger Z belt covers

Z belt covers with StealthChanger logo.

Downloads
96
Likes
37
Rating
5
P
PrintablesJascnC

Stealthchanger Stealthburner backplate v1.1 magnet mod

This magnet mod secures your toolhead firmly in the dock for reliable, repeatable tool changes — no shifting, no misalignment. The magnets are integrated into the back of the dock ( back.stl ), adding minimal print time and material. On…

Downloads
95
Likes
12
Rating
5
P
PrintablesMRSalguod

BTT HDMI5 Mount for the Clicky-Clack Fridge Door with the stealthchanger Door Buffer V2

A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.

Downloads
94
Likes
20
Rating
0
P
PrintablesMajor Hack

BTT HDMI5 v1.0/v1.2 mount for Voron with Clicky Clacky and/or Door Buffer or StealthChanger

The BTT HDMI5 V1.2 display moved the HDMI and usb cables to be perpendicular to the PCB, so older versions of this mount won't work. These files should work with the Clicky Clacky door mod, and/or the Door Buffer for Stealthchanger. There…

Downloads
93
Likes
13
Rating
0
P
PrintablesTheEvilTweety

Dragonburner Stealthchanger Cartographer Mount

Eine einfache Änderung am Stealthchanger Schlitten für eine Cartographer (Beacon) Aufnahme. Der Schlitten ist nach unten erweitert mit 2 M3 Einschmelzmuttern um den Carto zu befästigen Der Abstand ist für ein Revo-Hotend. Für andere kann…

Downloads
91
Likes
22
Rating
0
P
PrintablesWilliam

StealthChanger, Toolchanger X end-stop

A simple solution after experiencing a few false triggers during sensorless homing on the X axis. You will need to replace the M3x16mm bolts for M3x25mm

Downloads
90
Likes
19
Rating
0
P
PrintablesAero

Nitehawk-36 Toolboard Cover (StealthChanger)

Removed fan grills for better layer adhesion as original model kept breaking with ABS. Added StealthChanger Logo. I used 2 M3x25 screws but all 4 holes are available to be used for various mounting.

Downloads
82
Likes
11
Rating
0
P
Printablesrobertgriffiths

Sovol SV08 Stealthchanger Mount

This is a stealthchanger mount backplate and shuttle assembly specifically for a Sovol SV08 with a standard head. See https://github.com/DraftShift/StealthChanger for details of the StealthChanger system. If using the stealthchanger for…

Downloads
76
Likes
23
Rating
0
P
PrintablesJusii

StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2) mod

To be able to mount EBB36 cover over this, I made heatinsert holes 1mm deeper on the mounting plate, so my 5mm M3 standoffs reach better to hold the PCB on it. Cover is then mounted on these standoffs with M3x20 screws. Also shaved 0.5mm…

Downloads
68
Likes
7
Rating
0
P
Printableslameandboard

Stealthchanger Stealthburner backplate v1.1 magnet mod with screws for all pins

just stitched 2 mods together cant take credit for this.... these are untested printing as i post this lowered wiper too combined both of these two mods. one for magnets the other for all pins being screwed in. I cant take credit. i just…

Downloads
65
Likes
8
Rating
2

StealthChanger Dragon Burner Modular Dock 6 Mag. (stubby)

Док-станция мало отличается от оригинала, за исключением того, что адаптирована под установку внутри рамы принтера. Кроме того, крепление к профилю уже заложено в конструкции. The dock station differs little from the original, except that…

Downloads
65
Likes
13
Rating
5
P
PrintablesNadir @ CN3D

SV08 X/Y Endstops for StealthChanger

To avoid repeating myself, here’s everything you need to know about the Y Endstop , including configuration details: 👉 Sovol SV08 Y End Stop Depending on your MCU, you can reuse the original filament sensor port for the X Endstop ,…

Downloads
63
Likes
14
Rating
0
P
PrintablesKoenigHDxd

Modular Dock Front DB Sturdy (Stealthchanger)

I've tried the original front and some mods, but was never fully satisfied. In some cases the screws were a bit too long for my liking (especially when just screwed into plastic) or the screw holes didn't fit that perfect or it was a bit…

Downloads
61
Likes
10
Rating
0
P
PrintablesSconner

Angrydock Dragonburner for Stealthchanger

You gonna need dragonburner with magnets from Stealtchanger discord, get one now! https://discordapp.com/channels/1226846451028725821/1320029517376655462 40mm or 50mm M5 bolt is required, just download correct model.

Downloads
59
Likes
15
Rating
5
P
PrintablesTopdog

Stealthchanger anthead uhf dock and ducts

works well for my rapdio 2 plus uhf

Downloads
58
Likes
8
Rating
0
P
PrintablesLanz

X endstop mount for stealthchanger to relocate x endstop to the back

X endstop mount for stealthchanger to relocate x endstop to the back modded to relocate x endstop to the back - used in combination to voron rear umbelical added x endstop mount to relocate x-endstop for stealthchanger

Downloads
58
Likes
9
Rating
0
P
PrintablesMajor Hack

Stealthchanger Dockable Nudge or SexBolt mount

Introduction I tried the previous design and found my bracket was moving around a bit, and wanted something a bit more sturdy and perhaps simpler if possible. I also wanted something that would work with the Nudge or Sexbolt alignment…

Downloads
55
Likes
16
Rating
5
P
PrintablesCamara TAB3

Stealthchanger Anthead 6 Magnet Docking

for toolchanger Anthead toolhead with more magnets - might have to use a little super glue but works better in my opinion keeps the tools in more stables

Downloads
55
Likes
9
Rating
0
P
PrintablesPrints_r_us

Stealthchanger DoorBuffer Drill Jig

A jig for drilling the mounting holes on DraftShift's door buffer V2 cross bar.

Downloads
54
Likes
12
Rating
0
P
PrintablesSilicon Fossil

STEALTHCHANGER A4T MAGNETIC DOCK

Dock was modified to work with the full length dock version I am using on my StealthChanger build. Big shout out to Dudewithan02 for the original mod of the dock using the short version and to the team at DraftShift Design Check the…

Downloads
53
Likes
12
Rating
0
P
Printablesrobertgriffiths

Sovol SV08 head cover suitable for Stealthchanger face mounting

This is a stealthchanger head cover to allow cleaner mounting of a SV08 standard head onto a front mounted dock. This gives the head a flat front face, and allows for magnet placement to aid in dock retention. See…

Downloads
47
Likes
14
Rating
0
P
Printablesrobertgriffiths

Sovol SV08 bed raiser for stealthchanger implementation

The SV08 stealthchanger mount moves the head up 15mm and slightly forward. It will require raising. The bed shims require M4 thread inserts. Remove the bed, insert the shims as per photo, use the 6 original bed screws to fasten the shims.…

Downloads
45
Likes
11
Rating
0
P
Printablessecutright

170mm StealthChanger Screw Docks

This is a remix of the Screw Docks originally made by KEKO to work with the StealthChanger System. I already had the printed Door Buffer from DraftShift and wanted to fit these in to the original space, so I modified the dock slightly to…

Downloads
45
Likes
6
Rating
5
P
PrintablesCông Dương

A4T Stealthchanger – TZ V6 2.0 Complete Toolhead Assembly (STEP)

A4T Stealthchanger for TZ V6 2.0 Complete CAD assembly of an A4T toolhead configured for a Voron 2.4 with Stealthchanger and a TZ V6 2.0 hotend. The assembly brings the toolhead, WWBMG extruder, backplate and dock together in one editable…

Downloads
43
Likes
6
Rating
0
P
Printablesdubr

Fysetc Stealthchanger Distribution Board Bracket

Fysetc Stealthchanger Distribution Board Bracket for din rail adaptation. It's the black piece between the din rail adapter and board.

Downloads
39
Likes
14
Rating
0
P
Printablesrobertgriffiths

Sovol SV08 rear fan relocation shroud for stealthchanger implementation.

If you are implementing a toolchanger using the stock SV08 toolhead, the rear located fan would need removing since it gets in the way when docking/undocking the head. This cowl allows the rear fan to retained by rotating it out of the…

Downloads
39
Likes
12
Rating
0
P
PrintablesLimitlessPathX

StealthChanger Anthead Dock for CoreXY (Experimental)

I’m not a designer, just had this idea and it worked. its Stealth Changer for Trident or similer CoreXY. I’m still working on it and trying things out. It hasn’t been tested enough yet, and it can definitely be improved, but I’ve reached…

Downloads
35
Likes
25
Rating
0
P
PrintablesJusii

EBB36 + WWG2 Mount w/ Spring Steel Slot mod (for Stealthchanger)

Heat inserts to go deeper so I can use 5mm standoffs to attach EBB36 to plate and then attach cover to standoffs.

Downloads
34
Likes
7
Rating
0
P
PrintablesHanarius

Ebb36 mount, protoextruder2,stealthchanger

Just a remix of the ebb36 for stealthchanger

Downloads
34
Likes
3
Rating
0
P
PrintablesDood

Anthead StealthChanger Backplate with PCB Mount

This is a modified version of the Anthead Stealth Changer backplate, but with an extended pad for the PCB mount This works in conjunction with the modified PCB board I made here:

Downloads
34
Likes
7
Rating
5
P
PrintablesMajor Hack

N3MI 4 & 6-port Exhaust Plate for Stealthchanger with 7 segment LED

Modified N3MI's excellent umbilical plate to work with a 7-segment round LED that's available for $1 or so. Installs just like the original, but get a 7-bit WS2812 LED from aliExpress . I used a 3-pin JST-XH connector to make it easier to…

Downloads
31
Likes
12
Rating
0
P
Printablesdferrg

SV08 2020 x 400mm extrusion adapter for stealthchanger

Print one for every side, one of them mirrored.

Downloads
30
Likes
5
Rating
0
P
PrintablesTopha

Stealthburner stealthchanger backplate with magnet feet and screw pins

Overview I liked the mods that added magnet feet and screw pins, but I also wanted to have no glue in magnets. I've put these all together and provided the step file. The feet now use magnets instead of screws, but I have included a…

Downloads
30
Likes
3
Rating
0
P
PrintablesH3DA Components

StealthChanger Wago CAN Box

Hardware to use: 2 M3x5x4 inserts (Voron) 8 N52 neodymium magnets 6x3 1 PG7 connector Wagos 221 415 Remix of the BirdsNest Packs by EddieSha04

Downloads
28
Likes
14
Rating
0
P
PrintablesDrakarah

Stealthchanger shuttle Z endstop

See https://discord.com/channels/1226846451028725821/1401451184723595264

Downloads
27
Likes
8
Rating
0
P
PrintablesMunkee915

Panda Brush or A1 Mini Wiper for Voron Stealthchanger

I wanted to use the A1 mini wiper brush on my Stealtchanger build but didn't see an existing model for it, so I made this one. It fits the brush from the Panda Brush mod for X1/P1 perfectly, or the brush from the A1 mini if you cut it…

Downloads
27
Likes
8
Rating
0
P
PrintablesTheaninova

Voron 2.4 Filament Latch (Stealthchanger Logo)

Amazing Panel Latches modified with a Stealthchanger Logo in four orientations so it's the right way up on all sides.

Downloads
25
Likes
1
Rating
0
P
PrintablesTheEvilTweety

DB+StealthChanger+OrbiterV2+Ebb36+Mount

Ich habe den StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2) umgeändert, so das er auf einen Orbiter V2 passt. Ihr braucht 2 M3 Einschmelzmuttern, um das PCB zu befestigen. Ich empfehle ABS

Downloads
25
Likes
4
Rating
0
P
PrintablesMauxx91

Offset standoffs for Orbitool O2 for OrbiterV2 into Dragonburner v8 Stealthchanger v1.1 tool plate

I'm assembly a tool in the Stealth changer ecosystem, and i encountered an interference in the original mounting point that i solved with this offset standoffs. You can use this in case your building a tool with: Orbiter v2 Drangon burner…

Downloads
23
Likes
3
Rating
0
P
PrintablesDrakarah

Drag knife toolhead - compatible with StealthChanger backplate

I wanted a vinyl cutter for my StealthChanger build, I wrote about it https://github.com/drake7707/Drakarah3DPrinter/blob/main/journey-to-stealthcutter.md if you want more details how to use the toolhead

Downloads
23
Likes
15
Rating
0
P
PrintablesTheEvilTweety

Stealthchanger Screw Dock Dragonburner Mod

Kleiner Mod für das Dragonburner Dock von KEKO. Die sind einfach nur Perfekt gelungen. Danke dafür. Ich habe unten die Nozzlepads direkt ran gedruckt und so geändert das eine Federgelagerte Daumenschrauben M5 mit einer Selbstsichernden M5…

Downloads
23
Likes
9
Rating
0
P
PrintablesParkyCat

Reinforced EBB36 Mount with Protoxtruder 1.0, 2.0 with (Optional) Stealthchanger offset mounting

I reinforced the mounting holes and structure of the mount, so that there is no EBB36 Wiggle when straining the strain relief. I did this by looking at the PCB components arrangement of the EBB36 1.2 and seeing where I could add more…

Downloads
23
Likes
3
Rating
0
P
PrintablesWilliamWill3D

Dragon Burner / Rapid Burner Stealthchanger Dock Nozzle Clean Pad Mount

Hi, SHORT INFO: The second picture shows the older version, without a barrier behind the pad. Its just added to show the position, when the toolhead is mounted! Because Oozing was one of my biggest problems I added these Cleaning Pads to…

Downloads
22
Likes
5
Rating
0
P
Printablespatrezp

Sherpa Mini - Mellow Fly SHT-36 V3 - Stealthchanger

Tried to modify this for my need, as I have one toolhead with Sherpa Mini Moved the third mount hole to align with stealthchanger backplate for A4T

Downloads
21
Likes
4
Rating
0
P
PrintablesAndrew Wong

Improved Dragonburner Stealthchanger Backplate & Build Jig

After running Stealthchanger for a year, I've had a couple of backplates crack at the lower pin. So I've made this part stronger, as the CNC version of the Stealthchanger shuttle gives you more room. Tested and works great !

Downloads
21
Likes
6
Rating
0
P
PrintablesJascnC

Camera mount for Voron Stealthchanger

Cable can be run inside the extrusion back-facing side. Camera angle can be adjusted. I print it in ASA-CF because the nevermore will blow hot air to it. The camera is secured by m2 screws. Please print with support touching plate BOM: 2…

Downloads
20
Likes
9
Rating
0
P
PrintablesGilL Meister

back plate NH36 anthead stealthchanger LGX lite mount

i needed to adapt backplate and PCB plate for stealthchanger nh36 mount on anthead

Downloads
19
Likes
2
Rating
0
P
PrintablesLunetouche

6x LLLPlus buffer DIN rail mount For Stealthchanger

Simple (probably overengineered) brackets to mount 2 DIN rails to the back of 2020 based printer to mount several Mellow LLLPlus filament buffers. brackets have allowance for 4mm of panel/foam/whatever on the rear of printer. Parts should…

Downloads
18
Likes
16
Rating
0
P
PrintablesRelex

Stealthchanger Eddy Shuttle Mount

This is an btt eddy holder, meant for a stealtchanger, in order to use it i made a costum shuttle, its the normal one with 2 heat inserts in the back, to attach the eddy. Then there is the Connector piece, which is basically just an…

Downloads
16
Likes
3
Rating
0
P
PrintablesHitLuca

Stealthchanger A4T modular dock magnetic inserts

When testing my A4T toolheads on the stealthchanger modular docks I noticed they had a tendency to pivot back. I quickly found the common solution is to use this dock replacement which only adapts the short version and requires a reprint.…

Downloads
16
Likes
5
Rating
0
P
PrintablesJared

AntHead Stealthchanger Backplate with larger cable areas

Print how the StealthChanger documentation tells you to print. Fan and hotend wires run up the newly added corridors. LEDs and toolhead fan exit in the other channels.

Downloads
16
Likes
1
Rating
0
P
PrintablesParkyCat

5 Tool GX12-4 Umbilical Backplate for Voron Stealthchanger

This one requires GX12 4 pin connectors, and really cleans up the umbilical management! rest is self explanatory I hope, the required items are the same as listed in the original github.

Downloads
16
Likes
6
Rating
0
P
PrintablesTopha

Stealthburner magnet faceplate for Stealthchanger

This model is a combination of many mods. This one adds magnets to the faceplate of Stealthburner for use in Stealthchanger. I've only modded the nozzle cam versions as they have enough room to tuck the magnet away from the leds that use…

Downloads
14
Likes
0
Rating
0
P
PrintablesPit Live Props

PRUSAWIRE XL Stealthchanger Volcano and Nozzle Changing

The craziest project of this year. PrusaWIRE XL StealthChanger and Prusa XL VINDX Hotend Toolchanger PrusaWIRE XL StealthChanger is currently under active development. Throughout the design process, numerous concepts and engineering…

Downloads
14
Likes
5
Rating
0
P
PrintablesUsernameLost

Stealthburner - Stealthchanger Magnetic Dock - E3D v6

Magnetic dock for the Stealthburner with a Dragon hotend for my Stealthchanger. Based on EasterWorks' model on Github. Per GitHub recommendations: Current options allow for both Revo and Repido 2 hotends (credit to nicksnoopy on Discord…

Downloads
11
Likes
3
Rating
0
P
PrintablesMr.Maker

Stealth Skirts for StealthChanger and Clicky Clack Door 350mm Voron 2.4

Have a stealthchanger... good. Have a clicky clack.... good. Also like the stealth skirt design excellent then this is for you. Added a Push button hole to each front skirt as that's How mine is configured, Left side I use for LED's and…

Downloads
9
Likes
7
Rating
0
P
PrintablesKEKO

Voron 2.4 Stealthchanger - Simple Cartographer Cable Mount

A simple mount for the Cartographer cable without a cable clamp, just use a zip tie. It uses one of the threads in the motor mount that originally was for a cable tunnel. You can also optionally mount a Generic 3950 temperature sensor for…

Downloads
8
Likes
2
Rating
0
P
Printablessuperkent

6x LLL Plus Buffer for stealthchanger

I reduced the distance from the back wall.

Downloads
7
Likes
2
Rating
0
P
Printables2lignes

EBB36 mount for Orbiter 2 and PG7 Gland on Stealthchanger Anthead

This is my solution to get a more stable mount for the EBB36 on a stealthchanger backplate for the Anthead.

Downloads
7
Likes
0
Rating
0
P
Printableslameandboard

Mod for VoronTap and CNC tap and Stealthchanger

voron tap version on previous part see link below for rest of parts Umbilical for EBB42 with LGX on Voron stealthburner by xp1ratex | Download free STL model | Printables.com

Downloads
6
Likes
1
Rating
0
P
Printablese-owl

Cable chain mount + endstop arm for StealthChanger Shuttle

The design was developed to mount a StealthChanger Shuttle while keeping the x-axis chain and mechanical endstops. Based on StealthChanger Shuttle Keeper for a MGN12 linear rail and 6mm belts (StealthChanger repository:…

Downloads
6
Likes
3
Rating
0
P
PrintablesJeff Hengesbach

Nitehawk 36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger with OptoTap

Nitehawk-36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger w/Tap Clearance for the Optotap PCB is tight but available 3 Points of attachment to the toolhead Designed to work with the stock Stealthchanger backplate Printed Parts…

Downloads
6
Likes
3
Rating
0
P
PrintablesCông Dương

Cartographer V3 Mount for A4T Toolhead (StealthChanger Compatible)

Give your A4T Toolhead a clean, reliable home for the Cartographer V3. This mount is designed specifically for an A4T Toolhead fitted with a TZ-V6 2.0 hotend and fits naturally into StealthChanger setups. This reference configuration…

Downloads
6
Likes
1
Rating
0
P
Printableskeegan

Rainbow accents for StealthChanger

These are some colorful accent parts to show off the toolchanging capabilities of your V2.4 StealthChanger. I printed them with Polymaker Red, Green, Teal, and Black PLA PRO but you can use whatever materials and color combination you…

Downloads
5
Likes
2
Rating
0
P
PrintablesUsernameLost

Stealthburner - Stealthchanger Magnetic Dock - Dragon

Magnetic dock for the Stealthburner with a Dragon hotend for my Stealthchanger. Based on EasterWorks' model on Github. Per GitHub recommendations: Current options allow for both Revo and Repido 2 hotends (credit to nicksnoopy on Discord…

Downloads
5
Likes
0
Rating
0
P
PrintablesSpencerViridian

Nitehawk-36 + Orbiter 2.5 Mount w/ Spring Steel Slot (for Stealthchanger)

Remixed Tooks' mount with longer board standoffs and a slightly wider cable holder to better suit the cable included with the Nitehawk-36 toolboard. The connector didn't quite line up correctly when using this board/cable combination with…

Downloads
5
Likes
2
Rating
0
P
PrintablesАндрей

Fysetc Hexa distro fusion holder for StealthChanger

Переделал крышку чтобы не было зазоров по бокам.

Downloads
4
Likes
5
Rating
0

nitehawk36 mount for orbiter2.5 and stealtchhanger no colision with optical sensor on dragonburner stealthchanger backplate

nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor

Downloads
4
Likes
1
Rating
0
P
PrintablesJosh Harmon

StealthChanger dragonburner switch adapter

Since my stealthchanger uses eddy sensor for bed leveling, all the toolhead needs is presence detection, and the voron tap sensor is overkill for that. This mod lets you use a cheap microswitch instead, the standard D2FL. Leave the lever…

Downloads
4
Likes
2
Rating
0
P
PrintablesshtaXveed

ebb36 stealthchanger cover with esoterical fan splitter cutout

needed a cover to protect the ebb incase of tool drops i like dis one.

Downloads
3
Likes
1
Rating
0
P
PrintablesGdschaf

StealthChanger Printed Front for Extrusion Tophat - 350 Only

I liked the look of the printed top hat for my 350mm Voron v2.4 StealthChanger project, but wanted to use the extrusion top hat. I modified the original files to work with the size of the default extrusion tophat for the 350…

Downloads
3
Likes
4
Rating
0
P
PrintablesEddieSha

OV5640 - Stealthchanger Buffer Cam Mount

A small and simple 2020 extrusion mount for an OV5640 camera to be mounted just below the docks on the buffer crossbar. Uses (3) M2x6 self tapping screws to secure the camera to the mount. Two mount options are provided with a slight…

Downloads
1
Likes
1
Rating
0
P
PrintablesLouisCYUL

Stealthchanger 350 Top Hat Spool Holder Arm

Lets you put a spool inside the rear of the extrusion top hat on your Stealthchanger. Use with this arm: and a PTFE tube coupler of your choosing, I used an ECAS-to-ECAS coupler from the backpack project. Arm uses 4x M5x10 screws, guide…

Downloads
1
Likes
3
Rating
0
P
Printables

6x LLLPlus buffer DIN rail mount For Stealthchanger

Simple (probably overengineered) brackets to mount 2 DIN rails to the back of 2020 based printer to mount several Mellow LLLPlus filament buffers. brackets have allowance for 4mm of panel/foam/whatever on the rear of printer. Parts should…

P
Printables

Stealthchanger Screw Docks

As the name suggests these docks use screws to hook on, they are compatible with Dragonburner and Stealthburner. The old cowls can be reused, you just have to put two spacers and longer screws with nuts on the Toolheads. For the parking…

P
Printables

N3MI 4 & 6-port Exhaust Plate for Stealthchanger with 7 segment LED

Modified N3MI's excellent umbilical plate to work with a 7-segment round LED that's available for $1 or so. Installs just like the original, but get a 7-bit WS2812 LED from aliExpress . I used a 3-pin JST-XH connector to make it easier to…