Counting matching models…
this is a lego technic frame i designed to easily fit a locking differential in for lego technic, which is whats in the (kinda bad) pictures, but it can be used in many other ways I'm sure. can be printed in filament or resin
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Have you seen prices for commercially made star pumps? They are way overpriced. Thus I designed a printable version of it. The star-forming process takes quite a lot of force so print it strong :D with small layer height (0.1mm) to make…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Simplify your technical drawings with this handy 3D-printed hole and radius template! Designed to replace the often frustrating compass, this template provides accurate and consistent circles and radii without the issues of blunt points…
Technics Logo Plaque - A Timeless Tribute to Audio Legends Pay homage to a true icon in the world of audio with this high-quality, 3D-printable Technics logo plaque . For decades, the Technics name has been synonymous with unparalleled…
This base mount allows you to use TeachingTech's ball-joint camera mount system on your Flsun v400 (and possibly SR) rail. Specifically made to be short enough to work with enclosures. Currently designed to use phnxdrgn536's hardware…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
Qidi Tech X-Plus 3 bed leveling This is just a 280mmx280mm square 0.2mm high. You do not have to print the whole thing, this model is just useful for adjusting that Z offset. Printed in Black Polymaker ASA 0.2 layer height
Many years ago I bought a used Digitech 1101 preamp and some of the knobs were missing. I did eventually get original Digitech knobs from the manufacturer, but that took a while. In the mean time I designed all the knobs for the preamp,…
This repository is a collection of after market parts for Technics SL-BD20 that you can print and repair the turntable yourself. Thus the "keepalive". Cable Module The SL-BD20 has a proprietary ground cable, which is hard to find in 2025.…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
Райзер предназначен для 3д принтера Qidi Q2. Высота 45мм. Стекло можно сдвинуть (как на стоке), и поднять на 90°. Печатать с поднятым стеклом, я бы не советовал. Выкручиваем винты (2шт) крепления верхней крышки. Укладываем райзер и крепим…
In this stancil are reported: Surface roughness symbols Arrow for dimensioning Circle for shot peening Square and rectangles for geometric tolerance All the dimensions of the signs based on ISO stadards
Continuing to play around with Tech Deck obstacles. My countertop is quickly turning into a skatepark. Totally unintentional, but you have to test out your prints right? Glue AngleBarforBox onto box edges Depending on your printer, the…
Hello All - I have a Technics SL-15 linear drive turntable and originally, in the 80's you could get aluminum stands for it. I went looking for some and they go for $500 on ebay! I had a buddy draw me this up and it works perfectly! I…
A hook for securing a shopping bag to the rear seat in the trunk to prevent it from tipping over. With this shorter version of the hook, the trunk cover cannot be installed. Please note that it can get quite hot inside the car use PETG or…
Replacement endcap for an Acetech Lighter BT tracer unit.
Bracket for the La Crosse TX145R rain meter. May fit others with similar size. Designed so the rain meter sits securely and to allow water to drain easily. Secures with 4 screws (I suggest deck screws as they won't rust). You absolutely…
This is a replacement feet for Technics linear tracking turntables. I know for sure it works with SL-J1 and SL-J2, but I suspect it is compatible with all linear tracking models. It reuses the original spring and screw and is designed…
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
The model should be printed with supports on. To accommodate thicker spools, you can simply scale the Model in the slicer and move it slightly into the bed to decrease the plate thickness. If there is a need for other variants, leave a…
Printed in TPU 95A Makes button very sensitive. Is perfect
Here's how it all fits together.
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
This is made to mount the Bigtreetech Smart Filament Sensor to a 20X20 extrusion. The hole pattern for mounting the sensor allows the sensor to be mounted horizontal or vertical. I printed mine in PETG since this mounts outside the printer.
Printed on Reprap Fisher Delta at 15% infill, no supports. Required drilling out the centre hole to 5mm as it was not quite a perfect fit. An M5 nut should be glued in the end with the hex cutout.
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Ein Chamer Kampl ist ein Lebkuchen in der Form des Chamer Stadtwappens. Diese wurden am Neujahrstag verschenkt. Der Sage nach wurden die Chamer Kampl im Mittelalter auch nach Nürnberg geschickt, da zwischen den beiden Städten…
Print to scale, suggested about 5cm side.
This year I started teaching technical drawing. My school didnt have ani learning utensils to help. So I created some.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
Mount your Startech USB Hub securely! Mounts Startech ST4202USB USB 2.0 Hub, giving you open access to cabling on both sides (DC power barrel, USB-B & the four USB ports on the hub). Can screw right into a rack like…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
inspired by mech from the game called "G-NOME" the figure is 40mm height one model is with base, second model is baseless If you liked G-NOME or Mechs, follow me because more HAWCs are coming 0.08mm layer height
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Hello. This is my remix for a Logitech mouse m650 stand/holder.
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
A holder for this USB-Hub available on amazon or aliexpress .
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
Replacement feet for the logitech G915 keyboard (both with and without numpad). Background : I printed out riser attachments for the feet so that the keyboard is at around a 20-30 degree incline. This however over time hurt my wrist so i…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
The Technast Magical Text is designed to captivate and illuminate any space. This model features intricate details and is optimized for glow-in-the-dark printing. It's perfect for creating eye-catching signage or decorative elements that…
Hello everyone, I have vectorised a technical drawing of one of the first 3D printing patents and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the…
You need to calibrate the tolerances to print good and i recomend to put organic supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
If you are a HiTechPet door owner, and you live in a part of the country where there are seasons, you have probably experienced the occasion where the door opens and get stuck at the top of its travel. This simple spring / stop prevents…
Simple screw covers for HiTechPet dog doors. Often one breaks these when removing the door for service, painting, etc. OnShape:…
WARNING : Mouse will not fit correctly without the 40° riser. A box for Logitech MX Ergo mouse with a 40° riser . All risers should have the same base shape, but I can't guarantee that lower angle risers will work. Features Protected in…
For the flat models, print flat-part down, Organic supports, supports on build plate only. For the Skadis models, print flat/skadis down, with either: Organic supports, supports on build plate only. I have an MK4s and set “Overhang…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This project provides a custom mounting solution for upgrading the Monoprice Select Mini v2 3D printer with a BigTreeTech SKR Pico mainboard and a Raspberry Pi 3A(+). The SKR Pico can handle 12v and 24v, so I took the opportunity to…
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
This is made to mount the Bigtreetech Smart Filament Sensor to a 20X20 extrusion. The hole pattern for mounting the sensor allows the sensor to be mounted horizontal or vertical. I printed mine in PETG since this mounts outside the printer.
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…
This is a stackable Gridfinity bin for the Peaktech 2025 multimeter. In the lower section there is enough storage space for all the accessories included with the multimeter. The bin fits the standard 42 mm grid and has a size of 5x3x10.…
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
Print settings: nozzle: 0.4mm layer hight: 0.2mm supports: none Adapter: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 brim: optional (I didn't use it) Knobs: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 P.S. For me…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
The Techie is a back cover with a built-in precision screwdriver holder, designed for the CMF Phone 2 Pro. The model should load into your slicer in the correct orientation. I printed it at .2mm layer height, 80% infill, tree supports,…
Die Ringe dienen, gedruckt in verschiedenen Farben, zur einfachen Kennzeichnung von Gasflaschen. Beispielsweise grün = voll, gelb = angebrochen, rot = leer. Die Ringe (ID 114 mm, AD 120 mm, H 5 mm) passen sowohl über die aufgesetzte…
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
This is a replacement for the keyboard foot for a logitech k270 Printed quickly as .4 nozzle Prusa MK35 infill at 60% just in case more strength needed used Anycubic PLA+ Filament no supports
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
Demo This design requires additional hardware! This design must be printed in TPU! Making the Brass Connector This shock mount replaces the plastic mic holder at the end of the PRO 35's provided mounting clip. In order to securely connect…
This is a thingy i made for my baby monitor as the kickstand busted off it. Print in place and snaps on. No Hardware needed. Fun little design project i hope someone else can use. PETG is what i used for all prototypes and final part.…
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
These things are the most fragile part on the headphones. Hope this saves someone the $100 for the headband. I modelled the right one using Onshape and mirrored the left one. I got the best results printing it with tree support and brim…
Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
Technics SA-EH790/SB-DV290 Custom speaker grilles
