5,564 models
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
4 handle sizes, perfect for your DIY projects
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
A compact and reliable filament rewinder based on a linear counterweight mechanism that can be produced in a single 11 hour print. Provides a complete filament management solution eliminating the need for the space wasting and difficult…
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
I like the idea of original model Cotton pad and tips holder by Deli Pistačná, but I wanted more, so I created a remix which has these features/changes: Rounded edges Hexagon redesign Symetrical design (two holders for cotton swab /…
Case for TS100 Soldering Iron & Additional Tips . Uses 1.75mm filament for hinges, and 4mmx2mm Round Neodymium Magnets Outer Dimensions: 179mm x 38.6mm x 25.8mm Also have a look at my Fume Extractor & TS80 Case UPDATE v27: with better…
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
25/04/2024: V2 Version - added cutouts to the sides so sharpies and pens with pocket clips should also fit 4 of the holders now. Thank you @XanderShade01_404080 for the idea. Here is a link to his remixed version.…
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Apple Pencil Holder Also available for generic pens: CLICK_HERE Save your pencil's tip. Does not put pressure on your pencil's tip through a tapered canal so the pen does not rest on the tip but on the body. Printing: 4 walls 20% ZigZag…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
Use suppost as shown in green in the image.
Bracket for Q-Tips. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in german):…
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Use it to make a pendant, earrings or whatever you want. You can scale it down at 70% without issues. Size : 42mm x 37mm x 2mm Print Settings : Nozzle 0.4mm Layer height 0.15mm
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
Ersatz Drip Tip für den SMOK TFV 16 & 18.
I found several designs for cotton pads and tips holders, but none had the dimensions and shape I liked. So I created this parametric version for my purpose. The print you see was made using Prusament Galaxy Purple. Use the gcode file for…
The original model is very attracting design wise, but the wall thickness looks a little bold. This remix also provides a Fusion 360 file to parameterize the height of pads, sticks, wall and bottom thickness to be customizable for the…
The Kabura-ya Kabura-ya (鏑矢, lit. 'turnip[-headed] arrow') is a type of Japanese arrow used by the samurai class of feudal Japan. Kabura-ya were arrows which whistled when shot and were used in ritual archery exchanges before formal…
It' a Double P-top for Bora Centipede.
A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…
A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…
Tip for vacuum cleaner really narrow to be used on tiny spaces Print instructions no supports, pla, 20% Infill, 0,15 to 0,20 mm layer, prin with tip at top
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
Keep your Q-Tips clean and organized wherever you go! This durable threaded case is made of two parts and holds about 60 Q-Tips , making it ideal for trips and family use. Designed for cotton swabs up to 78 mm in length. Dimensions: Ø 50…
I frequently lose the movable part that enhances the grip on the tip of the Spring Clamp I use at home. This campaign motivated me to try printing replacement parts. ・I tried searching on Google Photos for the model number of this Spring…
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
I created this holder to store Q-Tips on the sink and included a cover to protect them from the usual splashes that happen around the bathroom sink. You may want to attach self-adhesive rubber bumper pads to the bottom to help keep it in…
il primo driptip per la sigaretta kiwi fatto dalla DYNAMICS
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
I found a cool drawing of an artist called HUNTER G showing a redesign of the U.S.S. Curry - NCC-42254 and I need to create an 3D model of it. Its a low detail model at the moment consisting of 69 STL files.
1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…
drip tip di varie varie dimensioni, sia come foro interno, si come diametro esterno
Print with low layerhight e.g. 0.15/ 0.1mm for the thread to work best. When the print is finished, assemble and carefully repeatly move the threads several times to get them to work. The hight inside with the lid on is about 75mm.
I created these Plant Pot Spacer Rings to tackle a common problem: stagnant moisture building up at the roots of plants in flower pots. After noticing some of my favourite houseplants struggling with soggy soil, I designed these rings to…
This is a holder for a Tip Toi pen that can be clamped to a shelf or a cupboard. The model contains three parts: 1. The quiver: This part is used to hold the pen 2. The decoration part: This one is optional. It is just for the look. 3.…
510 drip tip with space for a seal 0.95m of filament used, 3g 0.2mm nozzle, not 0.25mm
I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…
Designed to organize and keep safe the blades of a Kenwood multipro, blades diameter is 150mm. It is designed to fit 3 blades, I've printed my in PLA, the overall print is a massive 13H, but doesn't show particular critical points of…
This model is a storage solution for the Dell OptiPlex Micro (pictured is the 7080) PCs, allowing it to stand vertically, and neatly store the PSU and cable. There are accomodations made for the silicone cable strap, so you don't need to…
A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.
This a cartridge caddy for Brother P-Touch TZ and TZE tapes. It has been modified to have cartridge slots of two different sizes. The OpenSCAD file allows you to customize the number of slots and their respective sizes. This all sits on a…
Store up to six (cold) JBC C245 soldering tips, attached to the left to your soldering station. Specifically fits the profile of the C245 tips. This holder attaches to the soldering station just fine with a single M4 flathead bolt, length…
1x1 Gridfinity holder bin for threaded insert soldering tips Soldering tips for threaded inserts M2 2-56", M2.5 4-40", M3 M3S, M4 8-32", M5 10-24", M6 1/4", M9 5/16" You'll find it as a kit anywhere amazon aliexpress banggood ebay temu .…
I recently bought Fiskars detail knife , but the protector it came with can fell off and wear down with time. I decided to use my leftover magnets from previous project. The magnets hold the case closed and holds the tip in place as well.…
Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby
This is a ball-tip for a white cane. I've designed this for a friend, since commercial ball-tips are very expensive. This is designed to be assembled with minimal tools and the cap (the bottom part of the tip) can be replaced as it wears…
JBC Soldertip Container I needed something to carry a few soldertips in a protective container. I designed this part to carry seven of the tips. Instructions Printing this is pretty straight forward, there are just two STLs to print. The…
I builded a pencil cup with a lockable tip for the Kids It's 141 mm high, and 65 mm in diameter. I had the idea myself, however I saw that @Markus_317812 had already uploaded a similar model. Is only fair, then, if I mention him. Besides…
Bobbins for sewing machines are far to expensive if you own a 3D-printer and have the opportunity to make them by yourself. And as if the price is not deterrent enough there are countless different models of those bobbins even within one…
Do you have multiple phones, and nowhere to store them? Do you use more than one phone for work, or anything else, but they don't support wireless charging so you're constantly running over the cable with your chair, but you're too lazy…
Small box and stand for soldering tips for Pinecil or TS100. The case is designed for short tips (88 mm length). Adjustment for longer tips: In case use have “normal” (105mm long) ones you can adjust the model in following ways. adjust…
Holder for 5 spare tips for the TS100 soldering iron and the matching hex key. Main version has hook and pin for attaching to a IKEA skådis pegboard. Also includes version with smooth back for attaching with double sided tape, command…
Two lids, spacers between them, dividers to containerize them. Rest is on you. print lid 2x. spacers work 3x for me, but 2x aint hald bad either. for 2 spacers go with 2 taller dividers, for 3 spacers 2x tall, 1x low divider worked best…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…
A fourteen-sided shape made of regular hexagons and equilateral triangles.
A square antiprism or anticube. A ten-sided shape made of squares and equilateral triangles.
A connector to make a pentagonal antiprism out of straws.
Notched wing tip for a GFAK "Storm Series" stunt kite, but probably fits more brands. It slips on any 5mm rod. Notch is deep enough to fit 2 elastic cords if needed. Scale to fit your kite. Note: My 3MF and Gcode have an interior brim…
Recommended to print in PTEG, ASA, ABS or other durable materials. Print upside down with supports with supports till 30° (Check print file for reference) Use 100% infill Use atleast 4 side walls
EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them that way on the…
The OEM ports on the Cyclone loader are simply a few small holes drilled in the housing to allow the gas that cycles the feed to exhaust. This leaves them completely exposed to the elements. If you play woodsball/milsim this leaves them…
A twelve-sided shape made of regular pentagons and equilateral triangles.
The model is inspired by https://makerworld.com/en/models/1265553-shower-head-print-head-with-small-aperture , but it is original creation created from scratch. I was unhappy with the original model, the print quality was not the best,…
I dropped and broke the nozzle tip in my tube, designed this to replace it. Works well for me, fits snugly.
My wife is heavily into various forms of crafts. As such, she uses many different cutting tools many which are different size scissors. The scissors that this cover was designed for are Fiskars Micro-tip. These scissors are extremely…
A holder or stand for your Crayola Supertip markers. This model is designed as a 50 pen holder. It splits into two 25 pen holders that are held together with magnets. Giving you the flexibility to keep the two stands together as one, or…
This is an amplifier box that has multiple covers. * Piggy bank. * Planter / Pot. * Pen Holder. * Just a box to store thigs. * The base can be use as a phone holder, (try to play music in it, this could be a surprise). It was printed in a…
Included in the files for this Santa Coaster are English, Czech (of course), Spanish, French, German, Italian and Swedish/Norwegian language variants. I've only printed the English versions, but the other language variants were simple…
Hi, Here is a kit to make a teepee shelf. The .stl files can be customized 3 values to customize : largeur_planche = width board epaisseur_planche = thickness board Hauteur_Tipie = Height teepee This will allow you to generate 6 files (3…
Un panneau antipub à imprimer avec trois changements de couleurs (couleur 1: blanc, couleur 2: rouge, couleur 3: noir). Source SVG: https://fr.m.wikipedia.org/wiki/Fichier:Antipub.svg (domaine public)
The tip ejector part on Eppendorf Research Plus P20 (20 μL) micropipettors tends to break quite easily. I designed this replacement part. Fit perfectly right off the printer when “Hole Horizontal Expansion” was set to 0.0 in Cura.
*** german version below *** I designed this holder to store my CNC Kitchen soldering iron tips to use for threaded inserts on my skadis wall. This works with the AP 2 tips. Printing this is quite simple, i placed supports under the…
A simple model to hold six Weller ET series soldering tips. It is designed to stick to the back of the Weller PH 70 safety rest. I just used a 3M Command Strip. The holes are slightly tapered to get a positive hold on the different tips…
Clip para antiparras el problema mas comun de los que nadamos es que se rompen donde enganchan las gomitas que soportan bueno la solucion es algo simple pero aqui les dejo mi diseño , perfil de impresion ender 3 pro nozle 0,4 pla 3di cama…
This sensor mount can interface various Qwiic-connector sensors from Sparkfun onto the XRP robotics platform. Example sensors include Sparkfun Qwiic ToF Imager, Sparkfun 9DoF IMU Breakout, and Sparkfun High Precision Temperature Sensor.…
Simple parametric model for holding Q-tips...or whatever you want :)
Leave your stuff clamped without worries. Stays on tight.
Print two of these with supports and 50% infill. Can be used to attach with M3 (3mm) screws a Dell Optiplex 5050 MFF to a wall, under-desk or desktop. Use ½ inch (12.7 mm) Velcro straps.
This SD card organizer is designed for efficient storage and easy access! Featuring a convenient catch-all tray, 10 dedicated micro SD card slots, and 3 regular SD card slots, this 3D printed organizer keeps your cards secure and neatly…
This AirTag mount is designed to be printed in multiple pieces and assembled around the collar itself, as this particular model does not come apart to slide one on. The two bottom half pieces are each designed to hold two M3 locknuts…
Stabbing tip checker for Amtgard. If the weapon touches the plus-like structure at the end, it breaks the following rule. From the V8 rules (page 18, Stabbing Tip): Stabbing tips must not protrude more than 1.5" through a 2.5" ring when…
For instructions on how to design and print your own, go to: Designing Multiplanar Origami Printing Multiplanar Origami Open the 3mf file as a project in Prusaslicer to see when to add the mesh and where the PVA (to prevent adhesion) and…
I bought a second hand cue and it had no tip. I bought new tips and glued one on then proceeded to sand it, following a youtube video... Turns out I'm not good at shaping cue tips as it wasn't very straight. So I decided to build a simple…
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
