Search results: toolchanger

Sort order

136 models

Duet 3 6HC, Tool Distribution Board, and Rpi Mounts for E3D ToolChanger

Board mount for Duet 3 6HC and Tool Distribution Board Mounts for E3D ToolChanger. Uses M3 heat set inserts for mounting electronics to the adapter and the adapter to the ToolChanger.

Downloads
76
Likes
14
Rating
5
P
PrintablesEG14012

Star for toolchanger or color mixing

By the end of september, i will pick the best photo of a make and give a shoutout of them on the next model!

Downloads
388
Likes
64
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger Hemera Fan Shroud

I made a new fan shroud for the E3D Hemera, which i use in my ToolChanger. I printed it with the Prusa SL1, but FFF will also work. Update V5.1: Added additional 0.5mm to the mounting points. Feel free to remix and improve it.

Downloads
380
Likes
32
Rating
5
P
PrintablesE3D

Motion System - E3D Toolchanger

Please refer to our Motion System Github for more information.

Downloads
289
Likes
48
Rating
0
P
PrintablesEMNA

E3NG-Toolchanger

Note: This project is currently in Beta. Community testing and feedback are greatly needed. The build guide and BOM have been posted! please visit https://github.com/emna2881/E3NG-Toolchanger . Hotend-Swapping Mechanism: Swaps hotends…

Downloads
266
Likes
325
Rating
0
P
PrintablesE3D

Revo Hemera XS Tool - E3D Toolchanger

MODEL DETAILS These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform. A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use…

Downloads
231
Likes
21
Rating
0
P
PrintablesSergei Irbis

MedusaHC V0.2 – Budget Hotend Toolchanger

MedusaHC is an open-source budget toolchanger that swaps only the hotend assembly, including the heater, thermistor and fan. It was developed as an add-on for Duender and can also be adapted to other DIY CoreXY printers.…

Downloads
220
Likes
159
Rating
0
P
PrintablesKhalid 3D Works

Stealthchanger / Toolchanger Test Chip

Stealthchanger / Toolchanger test Chip. This is multi parts so you can color them easily. Available in .stl, .obj and .3mf files.

Downloads
176
Likes
14
Rating
0
P
PrintablesTeachingTech

Sovol SV08 Toolchanger Project

After a year and a half the SV08 toolchanger mod has been released. In collaboration with DraftShift design, their Stealthchanger mod for the Voron 2 ( https://github.com/DraftShift/StealthChanger ) has been adapted to the SV08. Due to…

Downloads
170
Likes
373
Rating
5
P
PrintablesKhalid 3D Works

Stealthchanger / Toolchanger Voron Design Calibration Cube

Stealthchanger / Toolchanger Voron Design Calibration Cube This is multi parts so you can color them easily.

Downloads
152
Likes
20
Rating
5
P
PrintablesFrozenBubble

Axial Flux Magswitch Toolchanger (built on Ratrig V-core 3.1)

There is a more complete publication on Thingiverse. (It's a competition entry). When the competition is over I will propagate it to here: https://www.thingiverse.com/thing:6804974 Video of it printing: Mechanism overview and how to…

Downloads
151
Likes
47
Rating
0
P
PrintablesE3D

Toolhead - E3D Toolchanger

Please refer to our Toolchanger Github for more information.

Downloads
149
Likes
33
Rating
0
P

SV08 2020 Top Rail Adapter Bracket (ToolChanger or Lightbar Mods)

This is an adaptor bracket that adds 2020 to the top of the SV08. It fits into the existing hardware and top bar without modification. This is intended to allow the use of the docks for the StealthChanger or TapChanger Toolchanger mods.…

Downloads
140
Likes
46
Rating
5
P
PrintablesChrissels

Hemera XS mount for E3D ToolChanger

2 different versions of the mount, unmirrored and mirrored. To save as much space as possible I moved the filament lever underneath the receiver, though it doesn't look like it, the filament lever is still quite easily accessible and if…

Downloads
128
Likes
19
Rating
5
P
PrintablesElias G

Personal Assembled E3D Toolchanger

STEP & F3D files of my E3D toolchanger

Downloads
124
Likes
14
Rating
0
P
Printables1ri

Lineux DockSlide Toolchanger for Voron Trident

Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…

Downloads
116
Likes
42
Rating
0
P
PrintablesE3D

E3D Revo Roto Toolchanger Mount

Two Roto toolchanger mounting options for use with or without the Duet Roto Toolboard. Both of these designs use a 404010 blower fan as comes with the standard tool options from E3D. The fan duct should be printed with a high temperature…

Downloads
98
Likes
18
Rating
0
P
PrintablesWilliam

StealthChanger, Toolchanger X end-stop

A simple solution after experiencing a few false triggers during sensorless homing on the X axis. You will need to replace the M3x16mm bolts for M3x25mm

Downloads
90
Likes
19
Rating
0
P
PrintablesE3D

V6 Hemera Tool - E3D Toolchanger

Please refer to our Toolchanger Github for more information.

Downloads
83
Likes
12
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger Cable Clips

A quick design to organize the bowdentubes, strain reliefs and cables on my self-made E3D ToolChanger. I now made a version for the original ToolChanger, but since i sourced the parts by my own, i couldnt test it with the strain reliefs…

Downloads
79
Likes
23
Rating
5
P
PrintablesGreg_The_Maker

E3D's ToolChanger - Adjustable Cleaning Brush

Add automatic brush height adjustment to your Motion System & ToolChanger ! A motorised adjustable brush for the wiping and cleaning of nozzles during tool changes. If you would like dual adjustable brushes (why wouldn't you?) print a set…

Downloads
78
Likes
20
Rating
5
P
PrintablesINVESTEGATE

Prusa XL – Tool-Changer Toolchanger Stresstest Stress Test G-Codes Gcode

These G-code files are service and endurance tests for the Prusa XL toolchanger . They are designed to repeatedly cycle through all toolheads to stress-test the docking system , tool coupling mechanism, and repeatability under controlled…

Downloads
77
Likes
22
Rating
5
P
PrintablesMaxStein

E3D toolchanger mount for Smart Orbiter v3.0 extruder

2024-12-29: Updated version. Current generation files are (duet 1LC not supported): pAdapterPlate-6023blower-06.stl AND pFanDuct-14. ********************************************************************************************** Adapter to…

Downloads
76
Likes
14
Rating
0
P

Horizontal Dock System for MadMax Toolchanger (Ender 5 / Mercury One.1 Remix)

Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid…

Downloads
70
Likes
22
Rating
0
P
PrintablesYell

Trident Toolchanger Docks for Anthead on Crossbar.

Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…

Downloads
64
Likes
32
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger - Toolhead LED Illumination

I made a little holder to put a LED strip underneath the toolhead, so i got the light where i need it. It is a simple and easy printable part, which clicks onto the the spacers. The cable can be laid as the cable from the endstop. You…

Downloads
64
Likes
15
Rating
5
P
Printablesp3t3rp4nd4

E3D ToolChanger Simplify3D Model

I made a model to add to Simplify3D which visualize the printbed and the bracket from the E3D Tool Changer. It has no function, but looks nice. If you want to add the model, just got to Tools -> Options -> Machine -> Printer Models and…

Downloads
63
Likes
1
Rating
0
P
PrintablesJackmiller

Voron 2.4 Draftshift/Toolchanger 350mm Build Extended Full Skirt Bottom Frame

This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions. The Front Motors Are Extendet For 2040 Extrusions. Frame Must be Extendet in Y about 100mm Front Motors needs to…

Downloads
62
Likes
15
Rating
0
P
PrintablesOtann

Toolchanger CEB Backpack Junction Box

This mod allows you to mount the CEB pcb to the back of your printer and hide your CanBus cable management neatly in a pretty box. It goes nicely with another model I've made that allows you to route the cables via the back filter: Voron…

Downloads
55
Likes
24
Rating
5
P
PrintablesZachMods

Toolchanger For Prusa Mk3s+

Introducing the first tool changer for the Prusa i3 Mk3s+. This model is to be used with the BIQU Hermit Crab. So far there has never been a way to quickly change extruders or other addons on and off your printer. This model will make…

Downloads
54
Likes
24
Rating
0
P
PrintablesAdam Haile

E3D ToolChanger Hemera Mount with Captive Nuts

These 3 stock E3D ToolChanger Hemera mount components require threading screws directly into the plastic, which I'm not a fan of. I have modified these components to instead use captive M3 nuts which will provide a stronger hold and…

Downloads
54
Likes
11
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger - Simple Raspberry Pi Zero Camera Mount

I made a really simple mount for the original Raspberry Pi Zero case. I cut a bigger hole into original cover to fit the wide angle camera and used some glue to fix it in there. Into the backside of the case i drilled two holes for M3…

Downloads
51
Likes
13
Rating
5
P
PrintablesMYCNC3D

Open5x for Toolchanger

Work in progress... https://github.com/FreddieHong19/Open5x Use 6201 Ball Bearing

Downloads
49
Likes
19
Rating
0
P
PrintablesElias G

E3D Toolchanger Hemera raised blower

This exists due to the EMI coming from the Hemera stepper motor interfering with the blower fan and not allowing it to spin. The idea to raise the blower fan comes from @shivdeepak_370671 ( https://www.printables.com/model/445024 ),…

Downloads
49
Likes
6
Rating
0
P
Printablesramble392

E3D Revo Roto ToolChanger Blower Fan Duct and Mount

About This is a part cooling fan duct and mount for the E3D ToolChanger and Roto extruder. It is designed around the WinSinn 4010 blower fan and supports the attachment of the Duet Roto Toolboard. Printed Parts List PCF Duct Toolboard…

Downloads
49
Likes
7
Rating
0
P
PrintablesCaveman

E3D Toolchanger orbiter v2.0 mount

Sharing my model to mount Orbiter V2.0 direct extruder to work on the E3D Toolchanger. Works with the v6 tool plate. The file is printed in Petg, It hold up very nicely. The base is made to accomodate M3 inserts to mount the extruder.…

Downloads
46
Likes
11
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger - Hemera Bowden Holder

A simple design, which replaces the Titan extruders to hold the bowden tubes when switching to Hemera extruders on the E3D ToolChanger. Fits the standard Titan mounting holes and holds up a 6mm bowden tube. There are two versions of E3Ds…

Downloads
45
Likes
9
Rating
0
P
PrintablesMYCNC3D

Toolchanger Orbiter V2 adapter

Print in ASA PLA 0.2mm layer height No support needed

Downloads
44
Likes
12
Rating
0
P
PrintablesE3D

V6 Bowden Tool - E3D Toolchanger

Please refer to our Toolchanger Github for more information.

Downloads
43
Likes
16
Rating
0
P
PrintablesDreded

2D Mario Wall Art (No AMS or ToolChanger needed)

Full Description This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your…

Downloads
42
Likes
11
Rating
0
P
PrintablesSebastian

BondTech LGX ACE - E3D toolchanger tool adapter

E3D ToolChanger adapter for BondTech LGX ACE Copperhead/Mosquito Printhead. I really dislike the way the E3D Hemera tool is designed. Assembly: (assembly video instructions coming soon) you need to print: 1x tc receiver 1x toolplate…

Downloads
42
Likes
9
Rating
5
P
Printables3Diocrity

Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right)

Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right) I wanted to use the standard Dragonburner toolhead on my attempt at a MadMax toolchanger, so I remixed Chirpy's V8 of the Dragonburner toolhead to include the holes for…

Downloads
41
Likes
9
Rating
0
P
PrintablesBash_Tech

E3d Toolchanger enclosure

E3d Toolchanger enclosure with 2020 extrusions

Downloads
41
Likes
9
Rating
0
P
PrintablesOtann

Toolchanger Cable Guide

This simple mod helps you to make your toolchanger cables to point up. This helps them to move freely without entangling with each other. Each section have 3 holes: 4mm for PTFE tube 1.2mm for the metal wire, if you have one 6mm for the…

Downloads
40
Likes
13
Rating
0
P
PrintablesJackmiller

Voron 2.4 Draftshift/Toolchanger Extended Z-Covers, with 2040 Front Extrusions.

Extended Z-Covers For 2040 Extrusions for the Voron Draftshift/Toolchanger Design. Used Screws : M3x8 (10 Pieces) This are Extended Z-Covers for the front of the Draftshift/Toolchanger with 2040 Extrusions. If you only Print the Shorter…

Downloads
36
Likes
9
Rating
0
P
PrintablesHarm van Mierlo

Mad Max toolchanger carriage 3mm dowels

This model includes the carriage of the Mad Max toolchanger, with 3mm holes instead of 1/8". This makes it easier to source parts. This is a drop-in replacement, so if you decide to use it, you only need to reprint this part. The…

Downloads
36
Likes
10
Rating
0
P
PrintablesElias G

E3D Toolchanger Omniadrop mount

This includes all printed parts that are needed for the Omniadrop V2.1 HEMERA (thin) to fit the E3D toolchanger. I RECOMMEND USING STRONG MATERIALS (PCTG, ABS, PETG, PC). I had the “Omniadrop Hemera 175 V2.1 Customized” outsourced as it…

Downloads
36
Likes
4
Rating
0
P
PrintablesColin Alston

E3D toolchanger rear cover

The new TC has a square hole for a Bowden setup option, but you're left with an unsightly hole when using direct drive. So as my first multi material print I made this blank plate with the E3D logo on it to cover the holes. Included are…

Downloads
36
Likes
3
Rating
5
P
PrintablesAlvaro Alvarez

2020 spool holder and toolchanger ptfe holder

This spool holder is simple and effective. You can place several spools on a tool changer chassis with it, and it also includes PTFE holders. It was designed with a number of issues in mind: It's designed to be simple. Being able to be…

Downloads
35
Likes
10
Rating
0
P
PrintablesRushmere3D

E3D ToolChanger X & Y Endstop Mounts

This is a quick Remix of Greg_The_Maker's version, my TC had extrusions without the little step and Greg's mounts didn't fit correctly. These have a 7.8mm wide step that sits perfectly in the extrusions on my toolchanger. Second picture…

Downloads
35
Likes
4
Rating
0
P
Printablesp3t3rp4nd4

ToolChanger - Adjustable Cleaning Brush

I changed the design, to place an other brush inside and also replaced the metal wire to a silicon strip to remove any extrudate from the nozzle before brushing. The silicon strip is 19x13x2mm and here is the brush i use:…

Downloads
35
Likes
13
Rating
5
P
Printablesslimpickens

Hemera Revo XS Part Cooling Fan Tilted Duct for E3D Toolchanger

The E3D Toolchanger tools are a challenging design due to the size, weight, and location constraints of the tool. For Hemera direct drive hotends, there is very little space for the part cooling fan, and most designs require the…

Downloads
35
Likes
7
Rating
0
P
PrintablesMichael-3d

ToolChanger -VZbot.basis

Sollte in hochwertigen Materialen mindestens ABS. Hab ihn selber nur in PC CF getestet. Funktioniert wunder bar bei Temperaturen Ü 60° im Bauraum ist die Magnetkraft subotimal deshalb bau ich die nächste Version ohne Magneten für Pla Petg…

Downloads
34
Likes
7
Rating
0
P
PrintablesMYCNC3D

Toolchanger NonPlanar Air Duct

Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles

Downloads
33
Likes
11
Rating
0
P
PrintablesSTENWORKS

Toolchanger LGX Lite + E3D REVO micro toolhead

Total weight of tool: 215g (measured by un-docking tool and placing it on a scale). No PCF mounting as I use side panel mounted fans. This setup is capable of printing 90A TPU without issues (I have not tried anything softer than this)…

Downloads
31
Likes
6
Rating
0
P
PrintablesRobAs

PanelDue 7 inch enclosure for E3D Toolchanger

I made this design because I wanted my 7 inch screen in the middle of my E3D Tool Changer, (most of) current designs are asymmetric. I wanted my screen to be mounted symmetric. With the two feet mounted, you can slide the case onto the…

Downloads
30
Likes
7
Rating
0
P
PrintablesElias G

HULA Prusa & E3D Toolchanger adapter

Find HULA prusa edition here: https://www.printables.com/model/873633-hula Print in PETG or better

Downloads
30
Likes
4
Rating
0
P
PrintablesStone

ToolChanger HotEnd Bracket V6 Groove Mount

Wanting to use 3mm filament for my Toolchanger the only way is to find a way to mount a groove mount hotend. Designed this Hotend Bracket that can hold a standard groove mount (12mm dia, 6mm height). All screws are M3, with the main holes…

Downloads
29
Likes
7
Rating
0
P
Printablesdc42

E3D'S ToolChanger - Hemera Tool using Duet 3 Tool Board

This Thing includes the following parts: Two of the parts (Hemera Dock Bracket and Hemera PCF Duct) from https://www.thingiverse.com/thing:4008778 modified to accommodate a Duet 3 Tool Board on the Hemera tool. My thanks to Greg Holloway…

Downloads
28
Likes
7
Rating
5
P
Printablestk

E3D's ToolChanger - detachable spool holder roller bearings

The friction was too much for that part so i remixed different designs and adjusted them for the E3D Printer Beware of the length ! Category: 3D Printer Parts

Downloads
28
Likes
2
Rating
0
P
PrintablesMacNite

E3D ToolChanger - Hemera Bowden Holder Multi Material Tool Number

I really liked the design by p3t3rp4nd4 to show the tool numbers in the machine directly. But I wanted to print it with multiple colours. After all this is one of the features of the E3D ToolChanger. I hope you like these files. If you…

Downloads
28
Likes
4
Rating
5
P
PrintablesStone

Smart Orbiter 3 for E3D Toolchanger Mount Without Toolboard

Adapt the Smart Orbiter 3 to the original Duet 2 Toolchanger (no Toolboard). See my separate model made for the version with Toolboard. Uses a 4010 Blower due to space constraints - there are threaded inserts to be put in the baseplate…

Downloads
27
Likes
5
Rating
0
P
Printables3dfiy My Life

Toolchanger / MMU / AMS Torture Test

A 3dbenchy in a bottle for all toolchangers, ams or mmu to test their capabilities. Do post yr make and don't forget to share the design.

Downloads
27
Likes
10
Rating
5
P
Printablesed

Jubilee Toolchanger Extruder assembly for Dragon Hotend using E3D toolplate and Orbiter V1.5 Extruder.

A narrow Orbiter based extruder for the Jubilee Printer using an E3D toolplate. Print using whatever material you like though I use PETG. All parts are oriented as they should be printed. I needed a brim around the cooling nozzle to keep…

Downloads
26
Likes
4
Rating
0
P
Printablesed

Jubilee Toolchanger Extruder assembly for Rapido Hotend using E3D toolplate and Orbiter V1.5 Extruder.

Extruder for Jubilee Printer Using Orbiter 1.5 and Rapido hotend based on an E3D toolplate. Will need (8) short Dodge heatserts. (1) 46mm PTFE tube. (4) M3 x 8mm socket heads to mount Orbiter and wiring stanchion. (2) M3 X 8mm countersunk…

Downloads
26
Likes
5
Rating
0
P

Nozzle Cleaning Brush Holder for MadMax Toolchanger

Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Keep your nozzles clean and your tool changes smooth with this dedicated nozzle brush holder,…

Downloads
26
Likes
3
Rating
0
P
PrintablesiZboxo

The Cheapest ToolChanger

Chci tento projekt prezentovat jako myšlenku, že stavba toolchangeru je lehká. Můžete se inspirovat mojí nástavbou výměny hlav ze souborů v tomto projektu. Část I. - Hardware Jelikož jsem chtěl postavit co nejjednodušší verzi, rozhodl…

Downloads
25
Likes
7
Rating
0
P
Printablesp3t3rp4nd4

E3D ToolChanger Hemera part cooling fan duct

E3D Hemera fan duct to use a airpump instead of a fan. I use a piece of 6mm aluminum tube to connect the hose to. Ive also uploaded another version which uses two 3mm tubes instead of a printed duct, which gives you the option to find the…

Downloads
25
Likes
4
Rating
0
P
PrintablesGreg_The_Maker

E3D's ToolChanger - Raspberry Pi Zero Camera Add-On

Designed to replace the Standard ToolChanger Cover , this cover takes a Raspberry Pi Zero and Mini Camera and mounts it to the ToolHead. For extra features install OctoPrint on the Zero! I bought some lenses to try to see if it was…

Downloads
24
Likes
11
Rating
0
P
PrintablesJust_Beans

Mad-Max Toolchanger Double-Dock

My setup that this was designed for: Ender 5 Plus ( 2020 V-Slot Aluminum Extrusions) with the following major modifications: Zero-G Mercury One.1 Core-XY Motion System Upgrade Project is located on Github Front Mounted MGN12 Rail on…

Downloads
23
Likes
5
Rating
0
P
PrintablesMYCNC3D

Toolchanger V6 NonPlanar Air Duct

Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles

Downloads
23
Likes
8
Rating
0
P
PrintablesBaoning Sha

E3D ToolChanger's Enclosure Hater

With a 250W heater the enclosure can be heated up to at least 70℃.

Downloads
23
Likes
4
Rating
0
P
PrintablesJames Wood

E3D Toolchanger Groove Mount Adapter

Adds a V6 groove-mount hotend to your E3D Toolchanger. Also holds the heatsink fan so that it's not flappin' around! Based on https://www.thingiverse.com/thing:3843247 Uses the part cooling fan from the above link, and the original E3D…

Downloads
23
Likes
3
Rating
0
P
PrintablesMr Yod

E3D ToolChanger Hemera Fan Shroud Tilted (Fail)

Update: sadly it doesn't seem to work properly, since my fan sometimes still needs a little push to start spinning. =( This is an ugly remix with the fan 10° tilted and further away from the back of the motor to allow it to spin; being…

Downloads
22
Likes
2
Rating
0
P

E3D Toolchanger DockAdapter for bowden-tube backboard setup

This simple remix allows to run the bowden tube trough the back.

Downloads
22
Likes
1
Rating
5
P
PrintablesLynlimer

XRP Toolchanger

This model is original from a rover project called Swapbot “Imagine a versatile attachment that seamlessly connects to an XRP robot frame. This ingenious unit can securely grip objects, swiftly switch between tools like a claw or…

Downloads
22
Likes
13
Rating
0
P
PrintablesYahms

Voron Tophat Back Panel For Toolchangers

Description Custom back panel for use with LDO Stealthchanger Tophat Kit: https://ldomotion.com/products/stealth-changer Also applicable to custom 200mm tall tophats made of 2020 extrusions. Designed for 8 tool setups and active…

Downloads
21
Likes
18
Rating
0

7 color rainbow for testing toolchanger/multicolor

A simple rainbow to test a toolchanger or other multicolor system. Import the 3mf into your slicer and set whatever colors you want for the different segments

Downloads
21
Likes
1
Rating
0
P
Printablesaamott

Compact Toolchanger

See it in action: Cheap 3D Printed Toolchanger Updates will be most regularly published at GrabCad | Compact CoreXY Toolchanger This is rebuild of the Solidoodle 3 with CoreXY Kinematics and a toolchanger based loosely on the E3D…

Downloads
21
Likes
9
Rating
0
P
PrintablesElias G

E3D Toolchanger (any) webcam mount

Print with supports!!!! (where there are 90° overhangs) Mounts with the original model this was remixed from

Downloads
21
Likes
5
Rating
0
P
Printablesnfrade

E3D Toolchanger Hemera Dock Shifted 7mm

I installed Hemeras in my Toolchanger and found that the Tool2 hot end fan and the Tool3 part cooling fan were too close together. Shifted the Tool3 Dock to the right 7mm to give them more airflow when docked. Note: You, of course, need…

Downloads
20
Likes
5
Rating
0
P
PrintablesStone

ToolChanger Nearly Direct Drive BMG V6

Not invented myself, but after seeing quite a few examples on the boards without model I decided to create my own and share it. Works really well and print quality is much easier to improve. Uses a standard BMG extruder, with a pancake…

Downloads
19
Likes
5
Rating
0
P
PrintablesJames Wood

E3D Toolchanger Titan Mount

Some E3D Toolchangers feature left-hand side cutouts for both the Hemera and the Titan extruders. This shim allows you to mount a Titan (or other through-panel-mount) extruder on one of these panels. This is designed to match the…

Downloads
19
Likes
7
Rating
5
P
PrintablesDarragh

E3D Toolchanger Pitlane with captive nuts

Throughout the build of the E3D Toolchanger I noticed a significant number of parts that rely on tapping into plastic printed parts, in my experience this is a great method when using M5 and above sized threads, but is not very reliable…

Downloads
16
Likes
3
Rating
0
P
Printablestwam

Duet 3 Adapter for E3D Toolchanger

Adapter to mount Duet 3 Mainboard and Duet Tool Distribution Board on the E3D Toolchanger Required Screws/Nuts: 4x M4 Nuts + M4x12 for Mounting Duet 3 Mainboard 4x M3 Nuts + M3x12 for Mounting Tool Distribution Board 4-8x M4 Nuts + M4x12…

Downloads
16
Likes
2
Rating
0
P
PrintablesPapaSchlumpf

A4T ToolChanger Dock "AntChanger"

The Stealthchanger Dock is a bit too complex for my needs and involves an excessive number of parts. I am looking for a simpler, more minimalist, yet reliable docking solution for my A4T ToolHeads. This is still very much a work in…

Downloads
15
Likes
6
Rating
0
P
Printablesmarto

E3D'S TOOLCHANGER - TOOL HEAD COVER REMIX for REVO HEMERA XS tools

You just print a new cover, a new cover for the tool head with a place for the switch, and then use the spare original E3D wiring. On each tool, the dock part is replaced, included are both normal and mirror tool parts. In rep rap…

Downloads
15
Likes
0
Rating
0
P
Printablestk

E3D Toolchanger Digimicro mount

I want to have my USB Micro mount to the tool changer for Calibration Category: 3D Printer Accessories

Downloads
15
Likes
2
Rating
0
P
Printables3Diocrity

Dragon Burner Toolhead Parts for MadMax Toolchanger - Bambu and Creality Hotends

Dragon Burner Toolhead Parts for MadMax Toolchanger A collection of parts for dragon Burner toolheads being used in MadMax toolchangers. I've included the parts that I've been working on to help convert my RigidBot CoreXY to a MadMax…

Downloads
14
Likes
1
Rating
0
P
Printablesdflemstr

Jubilee Adapter for E3D's ToolChanger Hemera Tool

A simple adapter that enables you to use E3D's Hemera ToolChanger tool on a Jubilee 3D printer. Uses the metal tool plate and dock, and raises them up to the appropriate height. There's also a piece sticking out for a Duet 3 ToolBoard…

Downloads
14
Likes
2
Rating
0
P
Printablestk

E3D Toolchanger IR DC42 Holder

I broke the mechanical switch so i had to act ,.. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 80% Filament: Yes PLA, CPE, PETG Maximum importance !!! Category:…

Downloads
14
Likes
2
Rating
0
P
PrintablesRushmere3D

EIBOS Artemis E3D Toolchanger Mount

This is the mount I created for the E3D Toolchanger and EIBOS Artemis Extruder in a direct drive config. Currently this would work for To & T1 without other modification to the existing printed parts. This replaces the V6 Receiver Top and…

Downloads
14
Likes
3
Rating
0
P
PrintablesElias G

E3D Toolchanger Pitlane

Print in 0.2 layers flat and i recommend a high infill percentage to keep it rigid. Print in PETG or better. Requires: Spare tool holder 4x M4 screws 4x M4 T nuts 2x M2.5 screws 2x M2.5 nuts

Downloads
14
Likes
2
Rating
0
P
Printablestk

Remix Titan Amor Mount for E3D Toolchanger

This is a remix of https://www.thingiverse.com/thing:3856096/ because it has 2 flaws 1) The Tension knob hole is too small 2) the distance from backplate for tension knob is too small swell so i extended it now i am happy feedback welcome…

Downloads
13
Likes
0
Rating
0
P
Printablestk

E3D Toolchanger Wiper Bucket

I have Standard wiper and building Gregs Adjustable Brush but because of having Brass nozzles as well i dint like the Steel brush stuff so i do it with Kitchen made silicon for wiping. But the oze bucket might be of use for others as well…

Downloads
13
Likes
1
Rating
0
P
PrintablesChrissels

Vibration Dampening mount for PSU of E3D ToolChanger

When printer my ToolChanger made a lot of noise. It turned out to be coming from the PSU (see video.) I made this vibration dampening mounts for the PSU to make it silent again. I printed the dampener parts (A & B) with NinjaFlex, 0.2 mm…

Downloads
13
Likes
1
Rating
0
P
PrintablesTerryMakes

Roto Toolchanger Adapter v1.0

This model allows the Revo Roto extruder to securely connect to the receiver and tool plate. It is designed to align the components in such a way to allow the Duet3 PCB to be added opposite the tool plate and not interfere with receiver…

Downloads
13
Likes
7
Rating
0
P
Printablestwam

ToolCatcher for E3D ToolChanger

Basket to catch falling tools and dropping filament on E3D's toolchanger. It is mounted to the holes designed for the Titan Extruders, so best used in conjunction with other tools like Hemera print-heads. Required Screws/Nuts: 4x M3x10 4x…

Downloads
13
Likes
3
Rating
0
P
Printablesimyzlv

TBG lite toolchanger mount

2 heat inserts for M3 bolts needed

Downloads
12
Likes
0
Rating
0
P
Printablestk

E3D Toolchanger Bigbox OOzebox holder

I was not happy with ooze solutions , i now have an E3D Toolchanger with V6, Mosquito , Aero Volcano and Hermes so different heights and so on. But reality is in multicolor it will ooze at the printer and spools so i decided to use the…

Downloads
12
Likes
0
Rating
0