Search results: traps

Sort order

282 models

P
PrintablesObe_Design

Cargo / Ratchet Strap Clip – for 25mm Straps

This 3D-printed cargo strap clip is designed to slide over a rolled-up cargo strap, keeping it neatly coiled and preventing it from unraveling during storage or transport. Perfect for keeping your garage, workshop, or van organized! These…

Downloads
1,576
Likes
994
Rating
4.96
P
PrintablesMatthew

Curved Quest 3 Adapter for Quest 2 Headstraps

None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…

Downloads
377
Likes
62
Rating
5
P
PrintablesFiveAngle

Prusa i3 MK2/3/S/+ Y Chassis Integrated Bushings (and Bearing Straps)

Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…

Downloads
322
Likes
34
Rating
5
P
PrintablesPo1nt

JoyCon Straps

I've lost my JoyCon straps and found hard to find replacements online. So I designed a 3D printed replacement that works just as fine. Print is provided with two design variants. One screwed, one glued. You'll need a few aditional acces…

Downloads
288
Likes
54
Rating
5
P
Printablesslelham

Magpul sling adapter for peak design straps

wanted to use a Peak Design Camera strap as a sling. Designed this for it to go through the magpul sling mount the peak design anchor keeps it in place. I printed this in PETG at 100% infill

Downloads
87
Likes
20
Rating
0
P
PrintablesMariam Matta

XL 90mm/3.5 inch Bias tape maker (for sewing, making double fold straps)

Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…

Downloads
87
Likes
36
Rating
5
P
PrintablesSilfer

AirTag holder for bag straps

Description While travelling during the summer vacation, I came to think about the usual way AirTags are used; hide it and hope that it is difficult to find it after the thieve’s iPhone sends out the notification about someone “following”…

Downloads
20
Likes
8
Rating
0
P
Printableswiseby

Buckle for Vertical 25mm Straps

Made this remix so I could attach a admin pouch to my harness. The mechanism of the clip is untouched from the original. I used the clip for 17mm straps. Fits straps that are 25mm in width. In my case (shown in the images) I attach a…

Downloads
19
Likes
1
Rating
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Downloads
5
Likes
1
Rating
0
P
PrintablesCapra-Audio

Capra Straps

Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…

Downloads
3,241
Likes
127
Rating
5
P
PrintablesRosti

Wasp & Hornet Traps

This is a set of wasp & hornet trap attachments for common (discarded) domestic food packaging containers. They will fit plastic milk containers, mineral water, carbonated-drink and jerry can containers (see specs below). Clear containers…

Downloads
1,616
Likes
136
Rating
5
P
PrintablesLSC

Nintendo Switch JoyCon grip & straps stand

Hello everyone! I would to share with you my Switch's JoyCon grip and straps stand. I also designed anti-slip feet printed out from flexi filament, whitch help keep stand in place. It's not necesary to print flex feet and Nintendo's logo,…

Downloads
1,200
Likes
234
Rating
5

Ear Savers Mask Straps

Collection of ear savers / mask straps I have found

Downloads
1,100
Likes
44
Rating
5
P
PrintablesTeo

Corners clamp for cargo straps multiple angles 26mm

There are now two options to join the pieces: with glue (choose the files with the word glue ) or interlocking them (choose the files with the word click ). If you need to build a square box, print 8 Corners clamp for cargo straps glue 4…

Downloads
967
Likes
642
Rating
5
P
Printablesdnlm

Meta Quest 3 Controller Grips / Straps

First (and working) draft of battery covers for the Quest 3 controllers with a loop to use the stock wristbands as controller grips. Like a cheap version of the official “Active Straps”. These were created really quick using tinkercad.com…

Downloads
722
Likes
112
Rating
4.33

Masterful Dungeons Floor Traps – Stone

Masterful Dungeons Floor Traps are designed as part of the Masterful Dungeons modular dungeon system. These tiles introduce interactive and hidden hazards into dungeon layouts while remaining fully compatible with the double-sided tile…

Downloads
675
Likes
142
Rating
5
P
Printables3Doodling

Aquarium Snail Traps

Here you have 3 different designs of snail traps for you to print and finally manage to control this pests in your aquarium, according to your needs! Snail Trap A: Bigger model; High holed cilinder where you deposit the snail bait inside.…

Downloads
630
Likes
57
Rating
4.5
P
Printablesnanuk

Anke Straps Bondage BDSM

Esposas de tobillos para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.

Downloads
581
Likes
110
Rating
0
P
PrintablesGhostguy6

Improved Wasp Bottle Traps

A simple remix of Mistertech's wasp traps. I added some gussets near the entrance holes to make the print a little stronger since it broke the first time it was knocked over.. I also added a 3mm hole with some support so you can thread a…

Downloads
564
Likes
56
Rating
4.71
P
Printableslukefpv

Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder

Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…

Downloads
545
Likes
32
Rating
5
P
PrintablesAllpa

Edge protector for 1" lashing straps / Kantenschutz für 25 mm Spanngurte

Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…

Downloads
518
Likes
47
Rating
5
P
Printablesgeektoybox

AirTag Holder for Dog Collars or Backpack Straps (F3D included)

3 part print that holds an AirTag on your dog's collar or any strap up to about 30mm wide and 3mm thick. Fusion360 file included so you can easily make it fit your collar/strap. Printed at .2mm layers, 3 perimeters in Prusament Azure Blue…

Downloads
488
Likes
101
Rating
5
P
PrintablesKrhom

Kayoumini TPU Battery Straps (with source)

I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.

Downloads
486
Likes
34
Rating
5
P
Printablesleonzz

Fitbit air adapter for Bicep straps or NATO bands

If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . This is a continuation following comments from the original model that only have band loop on one…

Downloads
437
Likes
15
Rating
5
P
PrintablesMichal Fanta

Flexible Watch Straps

The flexible strap replacement Swatch Irony Chrono 19mm watches. Three kinds of watch straps Classic, Flex, and Fitness.

Downloads
434
Likes
184
Rating
4.75
P
PrintablesMZ4250

Kobold Trapsmith

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Downloads
431
Likes
49
Rating
0
P
PrintablesSnappyCrunch

Pipe Straps for Schedule 40 PVC Pipe

I needed pipe straps for a project, but couldn't find the exact size I needed. So I figured as long as I'm whipping some up in CAD, I might as well make all the sizes. So here are some common sizes for Schedule 40 PVC pipe, and the…

Downloads
398
Likes
42
Rating
5
P
PrintablesUdo's 3D World

Tank Traps

These tank traps aim to represent the specifications from here, adapted for tabletop wargaming: https://en.wikipedia.org/wiki/Czech_hedgehog You need to print Leg_Basic once and Leg_Connectors twice. Make sure to NOT use super glue when…

Downloads
393
Likes
79
Rating
5
P
PrintablesBernsy97

Canik Mete MC9 Backstraps

Similar sizing to existing backstraps with the addition of an xs and xl. Fills in the gap behind the 10 round mag. If you like the design help me fund more pews. https://paypal.me/Bernsy97?country.x=US&locale.x=en_US

Downloads
373
Likes
34
Rating
5
P
Printablesfuchsr

Remixed clamp for TPU straps for One-For-All Cable Strap

I like @extrutim's cable strap but found that straps printed with PLA and PETG broke easily after a few open-and-closes of the latch. On the other hand, TPU straps have worked fine for me. Alas, I found it basically impossible to push a…

Downloads
327
Likes
83
Rating
4.5
P
PrintablesBuildX

#0038 Finger Splint (with integrated straps)

*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…

Downloads
308
Likes
49
Rating
0
P
PrintablesfireSTL

Apple TV 4K Mount Wall/TV Stand/straps/cable ties

Modell wurde um Ausschnitte für Kabelbinder oder Klettbänder erweitert. Vielen Dank an brahoy für die Vorlage.

Downloads
267
Likes
31
Rating
4.33
P

Mandalorian inspired shoulder straps

These are some simple shoulder straps that people can use to mimic the ones seen in season 3 of the Mandalorian

Downloads
260
Likes
28
Rating
5
P
Printablesmscalora

Cable Tie Straps

First design from scratch for TPU, used Sain Smart 92A TPU in blue, Fusion 360 archive is parametric so you can adjust overall length along with thickness, width, etc.

Downloads
252
Likes
23
Rating
0
P
PrintablesJ Lake 3D

Fully Printable Guinea Pig Wheelchair V1 (just need straps)

TESTED AND WORKING!!! NO SUPPORT REQUIRED :D (Tools needed: hair dryer with hot air+flat head screw driver) A design Im working on for a friends disabled guinea pig. has room for approx. 1" straps. Here are the wheels-…

Downloads
244
Likes
26
Rating
0
P
Printableshammycheesy

Stand for 4 Wii Remote WiiMotes and Wrist Straps

I wasn't able to find a stand that I liked, so I designed one. This stand will hold 4 WiiMotes and has space to contain their wrist straps. It will not fit WiiMotes with the protective silicone cover, nor does it have space for the…

Downloads
219
Likes
35
Rating
5
P
PrintablesKN16

Paracord Handle Clips For Molle Straps

These clips can be used to add paracord straps to any bag with 1 inch molle straps. Designed to have 4 passes of 550 paracord through it. No supports. 0.2 resolution. 50% or better infill. PLA+ or better filament. There are instructions…

Downloads
216
Likes
67
Rating
0
P
PrintablesOlaf Raffler

Fixing straps for hydroponic tower

It is easy and support free to print. Set the infill to 20% minimum.

Downloads
215
Likes
38
Rating
0
P
Printablesv1ncen7

A lightweight, slide-on strap adapter to securely mount carabiners and external gear onto backpack shoulder straps.

An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…

Downloads
213
Likes
160
Rating
4.5
P
Printablesdernst

Adjustable Straps for Face shield - A4 binding sheet - easy punching

Adjustable Straps for Face shield - A4 binding sheet - easy punching Print two straps per Face shield. Another mix of the FaceShield made a plastic strap due to concerns about fabric elastic bands harboring virus that is hard to kill.…

Downloads
211
Likes
1
Rating
0
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Downloads
200
Likes
100
Rating
0

3M 6200 Respirator Gas/dust mask straps #repair

What is it? Replacement straps for 3M gas mask. Two pieces printed out of flexible filament. I used extrudr TPU medium flex filament. Why make it? Originals broke. Latest revision Designed with FreeCAD 0.19 BOM Strap side with pockets…

Downloads
196
Likes
84
Rating
0
P
Printablescypo

Trapstar Keychain & Logo

Trapstar Keychain & Logo Contains multiple versions: Hollow - Keychain with text Solid - Plain Keychain with no text Horizontal & Vertical - different orientation of hole for keyring - see bellow Also contains models with no hole for…

Downloads
191
Likes
8
Rating
5
P
Printablesde_baich

Magnetic buckle for 20 mm straps

First of all I want to thank mr_vinn for the model he provided. This model is suitable for 20 mm straps, I also changed the design of the bars and of course the space for the magnets. For this model I used magnets with nominal size of 6…

Downloads
191
Likes
36
Rating
0
P
Printableshorrovac

Belt stopper for nylon straps (25mm)

Print in something strong (Polycarbonate or ASA or similar), in the orientation the parts are in the model for maximum strength, without supports. Clean up the parts and snap them together, with the teeth on the latch pointing towards the…

Downloads
190
Likes
35
Rating
5
P
Printablesamtechrs

Bait Jar for Crab / Shrimp / Crawdad traps

UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…

Downloads
189
Likes
15
Rating
5
P
Printablesdernst

Adjustable Straps (Version 2) for Face shield - A4 binding sheet - easy punching

Adjustable Straps (Version 2) for Face shield - A4 binding sheet - easy punching This version is easier to connect and holds together more securely by incorporating a second hole that allows the pegs to snap into place. Print two straps…

Downloads
189
Likes
0
Rating
0
P
PrintablesGeorge-Corrigan

Fly Traps

This is a fly trap that mounts to a 2-liter pop bottle. The flies go in and cannot find their way out. There is also a fastener to allow you to mount this to a flat surface, for example a 5 gallon bucket. You would just need to drill a 1…

Downloads
179
Likes
26
Rating
0
P
Printablescbutters

Hack Straps Steam Frame Ergonomic Kit Alternative

These are straps meant to be alternatives to the Steam Frame Ergonomic Kit. For instruction on how to install see this video at about the 6 minute mark: Hackstraps and other awesome VR products available on my store:…

Downloads
172
Likes
30
Rating
5
P
PrintablesAscardia

Double Side Release Buckle Female for MOLLE (compression straps)

Update 2021-05-29: Reduced the stretch to 2mm and removed a bit material where the buckles should snap. Now they fit better :) Update 2021-05-21: Stretched the design by 3mm. Buckles have now more space inside. Mine came out a few times…

Downloads
172
Likes
28
Rating
0
P
PrintablesScatterthought

Oculus Quest 2 controller Pistol Grips with Velcro Straps

These remixes add mounting points to MarkL's excellent pistol grips for the Quest 2 controllers. There are two versions. Version 1: socket mount Version 1 is designed for these 12" elastic cinch straps , and should work with any 1"-wide…

Downloads
169
Likes
30
Rating
5
P
PrintablesDockGuy

30mm fan adapter for 40mm opening with nut traps

I wanted a low profile adapter to mount a 30mm fan onto a 40mm duct. This model includes traps to hold 4 M3 nuts and clearance for 4 M3 bolts. V2 improves the fitment for nuts/bolts with wider openings but a 2 degree draft angle so that…

Downloads
167
Likes
17
Rating
5
P
PrintablesLorenzo

SlipLock (MOLLE style) flat clip for closed loop straps

I use it to attach my Leatherman Wave+ holder, but you can attach anything with a strap of up to about 25 mm wide. Shown on a LowePro ProTactic camera backpack. Printed in ABS with supports for the overhangs; organic tree supports come…

Downloads
167
Likes
48
Rating
5
P
PrintablesBrandon K

Hook and Clasp for 1/2 inch Elastic Straps

When installed on the bottom strap of a mask, allows much increased convenience in installation and removal of mask. Print instructions Print with the Clasp standing on it's side to avoid overhang. Print Hook on it's belly for highest…

Downloads
164
Likes
7
Rating
0
P
PrintablesChillyPenguin

Spool for Cam straps

Tired of tangled Cam straps? This is a spool for keeping Cam straps tidy between uses. Designed for 25mm Cam straps upto 4.5 metres in length. Print instructions I recommend PETG or other more flexible filament than PLA to allow the two…

Downloads
163
Likes
47
Rating
5
P
Printablesjaztermareal

Star Wars Force Unleashed Royal / Shadow / Senate Guard back armor and straps for 1:6 and 1:12 custom figures

This is the back plate and shoulder straps for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included is the back plate and optional straps (hard to tell if the guards have straps or not) to give…

Downloads
160
Likes
39
Rating
5
P
PrintablesSchmoxy

AKG K701/K702/K712/AKG K7XX Elastic Bands/Straps Fix

This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…

Downloads
157
Likes
15
Rating
5
P
PrintablesBarnyardingan

Ikea Koppla Outlet Power Strip 2 hole straps

Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…

Downloads
155
Likes
22
Rating
5
P
PrintablesKyle Berry

Anchor Connectors for Peak Design Straps

I had the strap and no anchors. They're $10 USD on amazon, but i have filament now… Onshape Model Print it however you like. On my Ender3, i didnt need supports for PETG, and printed 95 walls. took 11 minutes.

Downloads
152
Likes
16
Rating
5
P
PrintablesLukasz Filipski

Slim Strap Adjuster with opening - for continous straps, no cutting!

This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon

Downloads
152
Likes
19
Rating
5

Bikepacking handlebar bag straps

Hello!! this is my first design ever uploaded, I work as an Additive Manufacturing Engineer and I love to design parts for bikes, cars, and everyday objects, certainly you will see me around more often. Surprisingly I don't own a 3D…

Downloads
146
Likes
97
Rating
5
P
PrintablesEmbrace Making

NEW Covid-19 Face Shield Design (Prints ~4X Faster, No Elastic Required, Printable Straps!)

INSTRUCTIONS AND FEATURES HERE: I'm sharing with you my latest 3D printed Covid-19 face shield design! After many iterations, and combining some of the best features of popular face shield designs, I think this offers great protection,…

Downloads
145
Likes
4
Rating
0
P
PrintablesTarz

Yeti Hopper Cooler Hitchpoint Grid System Collection - Also Fits 1” Molle Webbing & Straps

Have a Yeti Hopper cooler with their 1” strap and loop Hitchpoint Grid and wish you could make it more versatile? Something extra for tailgates, road trips, or a day at the beach? Here’s a start. These designs were made for “hard” TPU,…

Downloads
144
Likes
28
Rating
0
P
PrintablesJace1969

Tie Fighter / Trooper Shoulder straps

Hi GNMaker09 I had a look amongst my files and this was all I could find on hand. They dont look that hard to make so if you get stuck, I could probably make some ; ) Will give it a go. Ha would you look at that : ) print the V2 and the…

Downloads
137
Likes
6
Rating
0
P
PrintablesJ Lake 3D

Fully Printable Guinea Pig Wheelchair V2 (just need straps)

This is technically less a v2 then just another type of guinea pig wheelchair with 4 wheels instead of 2 for those who need to work up some muscles in the front legs before using the v1 with 2 wheels which moves around much better because…

Downloads
134
Likes
17
Rating
0
P
PrintablesFui

Cam Lock Print in Place for Straps (V2)

Cam lock V2 for straps and ropes. Held in place by pressure from the cam. For ~1mm thick straps or ropes. The cam is bi-stable, it will not open when there is no pressure. Does not need supports. Printer does not need to be capable of a…

Downloads
132
Likes
23
Rating
0
P
PrintablesMarcus Thuelund

Steam Frame Controller Battery Door with Loop for Spigen Straps

I got AI to make a new design for the battery door, allowing straps to be attached. I sized it to perfectly fit the Spigen straps, and when using my other model for loop keys, it works perfectly, and is super comfortable. Without Spigen…

Downloads
132
Likes
10
Rating
5
P
Printablessmuk3d

VORON V0.2 Door handle with nut traps to screw in for fysetc kit 0.1

my door in the fysetc kit have to holes and i want to use them … and i think screws are better than tape :-D unfortunately i saw the fysetc door handle model to late, but i like nut traps even more than heatsinks ;-)

Downloads
130
Likes
18
Rating
5
P
Printablesflegne

Yellow Sticky Traps (Gelbfalle) Holder

A fast and easy to print holder for yellow sticky traps (Gelbtafeln/Gelbfallen). Prints in 5-7 minutes with < 1g of filament. Place a bunch of them on your printbed and slide your yellow card into the slot. Print instructions Category:…

Downloads
128
Likes
19
Rating
5

Luxo Ear Savers - Lockable, Cuttable, Surgical Face Mask Relief Straps

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are some ear savers that…

Downloads
126
Likes
7
Rating
5

TPU straps / ribbons

Inspiration and education credit: 3D Printing Nerd, MakeGood: Thanks @Mojee3D for sharing how to design it on Twitch I wanted to use this concept to make ribbons for my use cases – how will you customize them to use in your projects? I…

Downloads
125
Likes
26
Rating
4.67
P
PrintablesNuvz

Conduit pipe straps - 2", 1 1/2" & 1". For schedule 40 PVC conduit or pipe.

These are simple conduit straps for schedule 40 PVC conduit or pipe. Sizes for 2", 1 ½" and 1". Best printed with PETG or ABS. Each file will print 2 straps. Will also work on ABS pipe. Note: For best results when attaching these to the…

Downloads
124
Likes
6
Rating
0
P
PrintablesUnrulli Pirulli

Purse hanger (for leather straps)

Note: this is suuuuper over engineered I used to undo the strap on my bag and put the strap over the bar in the closet to prevent it from getting bent but that got really annoying so I spent way too much time making this silly hook and…

Downloads
121
Likes
33
Rating
0
P
PrintablesFujima

TPU Gear Straps 25mm wide (Molle sizing)

Printed with 0.8 nozzle. Printing with smaller nozzle is ok. These are straps to attach pouches or gear. I needed this to attach molle compatible pouches to my motorycle crash bars. The straps are 25mm wide. The straps resist pulling very…

Downloads
120
Likes
29
Rating
5
P
Printablesolendorf

Cable and Cord Straps

Flexible strap to hold and hang your cables, cords and ropes. Use Ninjaflex (85A) to create these straps. A TPU shore 95 is a little too stiff. If you scale it thinner, about .6 - 1mm, it should work ok. The strap is 208mm long so should…

Downloads
115
Likes
30
Rating
0
P
Printablesminishaven

Trapper Dice Traps Frosthaven

Traps for the Trapper class that use 8 mm dice to display the numerical value of a trap. Recommended printing colors: damage traps: red heal traps: blue

Downloads
105
Likes
10
Rating
0
P
Printablesbryan0226

SOMD Loves You: Modified RC3 Faceshield with Adjustable Straps and Overhead Support, Medium and Large

Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…

Downloads
101
Likes
1
Rating
0
P
Printablesnut

Hack Straps Steam Frame Straps - Inverted + curved edges

A remix of cbutters' Hack Straps . I find having the adjustment on the outer side of the strap to be more comfortable the inside, so I swapped the L R indicators. I also added curved edges for slightly more comfort and reinforced the top…

Downloads
100
Likes
7
Rating
5
P
PrintablesErmal

Action Camera Chest Plate (38mm Straps, GoPro-Compatible)

A printable chest plate designed for GoPro-style action cameras and 38 mm straps. Tested in PETG (photos included). No supports required. Part of a full chest-mount system I’m releasing piece by piece. Free STL here — engineering STEP…

Downloads
97
Likes
13
Rating
5
P
PrintablesZach Musker
Downloads
96
Likes
9
Rating
0
P
PrintablesUnknownkwita

Buckle for 2inch Straps

I wasnt able to find a buckle for 2inch strapping that I liked. So I remixed 3DMakerNoobs. Its basically the same, split down the middle, widened and extended. I printed in PLA.

Downloads
93
Likes
18
Rating
0
P
PrintablesFui

Print In Place Cam Lock (Ropes & Straps)

!!! Version 2 of this design is released. Find it on my profile !!! this design is up only for those who are already using it and need the file again. Cam lock for straps and ropes. Held in place by pressure from the cam. Originally…

Downloads
92
Likes
11
Rating
0
P
PrintablesThatRobHuman

E-Series Fixture Plates and Straps

Not much documentation on this one except to say that you'll need M5 hardware at whatever length you want for the strap clamps. The threaded Inserts in the fixture plates are meant to be 10mm The Eccentric Nut (the Mitey-Bite inspired…

Downloads
91
Likes
17
Rating
0
P
PrintablesVyc

TTGO Lora32 T3 Slimline Case (Thicker+Straps)

Case for LilyGO TTGO T3_V1.6.1

Downloads
89
Likes
3
Rating
0
P
PrintablesMichelle O'Shea

Clip on Brake Light and Vario Mounts for Saddle Bag Straps

These are handy for clipping a brake light to a saddle bag strap. The “brake light clip” versions are for the mounting system most of the cheapo rechargeable brake lights on <insert online marketplace> use, obviously YMMV, but STEP files…

Downloads
88
Likes
13
Rating
5
P
PrintablesMr Abraa

Huawei Gt2 replacement wrist straps / bands

Hi, these are easilly printable and very usable wrist straps for Huawei Gt2/Gt2e watch. I modelled them by measuring and redesigning from my wife's GT2, to fit my Gt2e, so I know it fits both. Would need some work to move fixtures but…

Downloads
87
Likes
11
Rating
5
P
PrintablesMangouste

Dragonteeth Tank Traps

The Arcadian Interior Guard's specialty is garrison duty. As such, they often make their assigned assignment strong-point more defensible by building a few extra fortification features such as tank traps. As per tradition, they embed the…

Downloads
87
Likes
20
Rating
0
P
PrintablesJoGar

Swimming Paddles No straps (fit)

Hi, this is a first. I've never designed anything like this, but here it is. I'm swimming two to three times a week and I intend to fully test and improve the model. Please give me as much feedback as possible if anyone uses it. I printed…

Downloads
84
Likes
22
Rating
5
P
PrintablesAnachronist

Platonic solid coin traps in OpenSCAD

After seeing the plethora of cube-shaped coin traps on Thingiverse, I decided to make some based on the five Platonic Solids: tetrahedron (4 sides), cube (6 sides), octahedron (8 sides), dodecahedron (12 sides), and icosahedron (20…

Downloads
83
Likes
17
Rating
0
P
PrintablesJer

Set of 105 Duct and Pipe Straps

Includes 105 pre-rendered STLs in 21 sizes x 5 weights, as well as the fully parameterized f360 source file so you can tweak the parameters and create custom brackets. Update: Modified the model to use fillet on the top and chamfer on the…

Downloads
83
Likes
19
Rating
5
P
PrintablesLému

Oathsworn Huntress Traps (Small and Large)

Enhance your Oathsworn sessions with these two bear trap models designed specifically for the Huntress character. One of her key abilities is placing traps on the field. You can now represent these traps with cute 3D accessories instead…

Downloads
82
Likes
9
Rating
0
P
PrintablesChri81

Spool for tie-down straps

Instructions Use a small saw to cut off the upper pivot from the rest of the model Insert the cut-off into the spool (hammer or glue could be required depending on the accuracy of your printer) use an electric drill to reel the strap This…

Downloads
81
Likes
32
Rating
4

Make your backpack straps tidy!

Works for the most common 20mm straps. It is hard to put them on, but that means they will not come off either!

Downloads
79
Likes
41
Rating
5
P
PrintablesPistonPin

Clips for ROK straps

I was tired of fiddling with rubber bands when storing my ROK straps away, so I remixed MasterFX' bag clips for a more convenient solution. :) Inner dimensions: Width: 30mm Height: 25mm Category: Sport & Outdoors

Downloads
79
Likes
25
Rating
0
P
Printablesvidision

Ultra Light Fishing Pole Straps

Scale to fit your needs! V1 is symmetrical V2 is meant to be installed X end first and then wrapped with the last slot hooked over the guide. Listed sizes are approximate (they are actually just a bit shorter).

Downloads
78
Likes
38
Rating
0
P

4 x Joy-Con and Straps Holder

Yet another holder for 4 x Joy-Con™ and Straps: • Simple drop-in / pick-up design • Minimal and efficient • Equipped with 4 circular recesses at the bottom to optionally stick silicone anti-slip pads Enjoy!

Downloads
77
Likes
10
Rating
5
P
Printablesbenmoulton

Shamrock and 4-Leaf Clover Coins for Leprechaun Traps and St. Patrick's Day Decorations

Print some coins for your leprechaun trap! I prefer the main model (thicker rim), but there is also a thinner rim available to print. Best of luck! I always love to see makes and get feedback on the models! Recommended layer height: 0.2…

Downloads
76
Likes
7
Rating
0
P
PrintablesEnigma644

Frosthaven Trapper Traps

The Trapper's traps in Frosthaven can have many different effects. These magnetically connecting traps should help with that. The base rotates to indicate the heal/damage value and you can stack as many status effect hands on top as you…

Downloads
76
Likes
3
Rating
0
P
Printablesgexgecko

Soft guard for ratchet straps with claw buckle

This clips on to the ratchet-strap buckle to protect items from scratches. Bonus points if you plasti-dip the bottom. It is sized for this buckle: https://www.amazon.ca/gp/product/B09C8P1F74 Approx. 39.5mm length for the rail/sides (not…

Downloads
75
Likes
26
Rating
5
P
Printableslayershifter

Strap lock for 32-35mm straps

You can use this as a replacement for bag straps for example. Print instructions Using a tough material like ABS is recommended as is the use of at least 3 shells and 30% infill or more.Using a tough material like ABS is recommended as is…

Downloads
74
Likes
13
Rating
0