121 models
The basic model has a diameter of 7,5 cm. I would print it on 75% or even 100%. It also works through both sides. So have much fun.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
I needed an additional area for our chicks to feed so I drew up this simple trough. Edges are rounded which may be safer for the birds, but a coupe of them like to walk around on or in it. No issues with this as of writing this. I place…
Print approx. €11.93–€14.58 excl. taxPreliminary estimate for PETGSource material: PET
Bird Water Bottle Holder with Trough Remix of PointNemo's Heat Wave Bird Saver Trough and holder for PET bottles to support local birds with water. Important because of increasing heat waves. You need a PET bottle (upcycling!) Easy…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
Simple feedthrough that optionally fits a M6 pneufit for ptfe tube. Does not require additional fasteners, clip-on.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
12HP storage trough for sd cards, USB sticks, guitar picks etc. I had a need to keep some loose things around when I'm playing and this solved the need. Nothing special or complex here, just a hole to throw your stuff in. Enjoy! I hope…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant
You can use this to install 4 Festo plugs on both sides with M5 Inserts. You don't have to put the hoses through the lid. Parts needed: 1x Enclosure Top Plug Edge for Festo + Inserts 8x Festo QSM-M5-4 8x Ruthex Insert M5x9,5 4x PTFE Tube…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Clips onto the lip of a trough to hold a phone or other small items during an ice bath.
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
A passtrough fidget made from honey comb infill. DO NOT USE THE STL File else it would print it normally use the gcode
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Christmass tree impossible passtrough fidget All you need is a well tuned 3d printer. You dont need to use supports. Happy printing :)
Just print it in the given orientation, up to 0.25mm layer hight (0.15-0.20mm is better). If you want to modify it, you can use the .step files If your screw cap wont fit right, you might have to work it free by simply twisting it tight…
It is a drinking trough for chickens or hens. Material : PLA Infill: 15% Supports: YES
Cable pass-trough for Ikea Lack case made of 2 parts and a thin gasket. Fits the display (for front-mount display) and power cables, so these don't need to exit to the back, thus you have more flexibility in placing the PSU under the…
Toy feed trough and "feed". Print trough upside down with bridging. Print instructions Toy feed trough and "feed". Print trough upside down with bridging.
There are 4 sizes that can be matched to create different lengths. Once snapped/press-fitted together it is very strong. Might need some minor touch up on the tabs for different printers/filaments/settings/etc. as it is a tight tolerance.
Made a bunch of versions and cool shapes! This is a simple passthrough fidget I made just for fun. The idea is that one part keeps sliding through the other in a continuous loop, so you can just sit there and move it back and forth…
Modelled from a retail design that works well with my own gutters. In print settings use 4 perimeter shells — see screenshot (print settings/vertical shells - Slic3r) Recommended print material: PETG (Less likely to snap in cold…
Please like and post makes also check out my other passthrough fidgets because they are all comparable with eachother
Design Concept The Spiral Fidget Cone is designed for both functionality and artistic appeal. Its spiral grooves provide a unique texture that is both visually captivating and pleasant to touch. Purpose This model serves as a fidget toy…
Food bowls are too tiny and take up a lot of space, a trough keeps the food moist longer and can go up against the tank!
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr). I used some hot glue to attach the tube to the trough. Using two strings around the tube I hanged it to the ceiling of the chicken coop. I printed this design with 35%…
I wanted to have a angled passtrough for my special Filaments . This way i dont need rollers for the Filament Spool, since the Extruder has more than enough strenght to pull the Filament. This is a Remix from 3DPR that worked like a charm…
I wanted to ensure a completely closed path from my Drybox into my Enlosure and to the Printer. To be easily able to open the bowden without effort I decided to go for the…
Cable trough / Kabelschacht (H0 scale) Hight 5 mm x width 8 mm
Voron 2.4r2 center rear skirt piece that has two hexagon holes with Parametric Umbilical Gland (PUG) passthrough ports.
here a fall throug tile with 3 entrances. The idea comes from here He did also a test print... Category: Hobby
An organiser for a lens cleaning kit of Kimwipes, Pancro lens cleaner, cotton buds, and sylvet cloth (hidden under) for the smaller Magliner Trough/Utility Box. The groove down the side is to fit around the interior studs of the trough…
I bought some white PCB water resistant RGB Strips and wanted to stealthily mount them permanently to my house - to stop with the yearly chore of putting up/down the christmas lights. I didn't trust the double sided tape, so I designed…
Durchführung eines 4mm PTFE Tubes am Core One für den MMU 3 Umbau. 5 Löcher müssen in das Top Panel gebohrt werden. 4x 3mm zum befestigen der Durchführung und 1x 5mm zur Tube Durchführung. BOM: 4x M3x5x4 Einschmelzmutter 4x M3x12 Schraube
Changing wiring on a Creality Ender 3 Pro and similar 3d printers results in removal of a fabric tape, typically, from the bundle of wiring to access the wires. Replacing the fabric tape or reusing it is a possibility, but I don't want to…
I was really bored of all the hooks for the Skadis pegboard. So I needed something which can be pushed trough from the front. I wanted something that can hold something in place with even only one screw. So there is my solution (after…
Low Poly water trough designed for Loyal Moses's BMR 2021 Christmas Community Print Drive to help print and ship free gifts to families and children all over the world this Christmas season. File and Prints of models not to sell or resale…
Just a remix with 6 holes
For four ø4mm PV-cable (ø6mm outer) this grommet provides a safe passthrough through wood timber or metal passthrough. Because of the slits you can bend the grommet open and insert the cables very easily. It is not a watertight thing, but…
Pixel back panel to work with PTFE passtrough P1P i adjusted the model so you can enclose your printer even more but still use the pixel enclosure from bambu lab. i made this fit for this PTFE passtrough P1P…
Chicken Drinking Trough for Soda Bottles - no support
Missing component for the Prusa MMU3 Enclosure Addon
Prusa MK3S White ABS with borders 1 x plumbing seal 30x20 1"
You'll need 1x M3 nut and 1x M3 screw min 8 mm long
I wanted a waste disposal method that didn't attach to the printer itself because my printer bench is in a corner and pretty cramped. Every time I had to move my printer to get to the back of it (which happens far more often than I…
Coupling designed to pass filament (1,75mm) trough a shelf. The coupling can be installed in any board or shelf between 14mm and 22mm thick and requires a 20mm hole in the board/shelf The two printed parts are threaded to fit together.…
40.6mm long X 22.2mm wide X 15.9mm tall. Adjust scale to achieve different size. I printed upside down (legs up) with organic support. The support cleaned off easily.
Simple solution to organise many different things. These are very common in shops. And I could not find one that was ticking all my boxes, so I designed this. You can easily set this up so it will fit anything that you want to store,…
An adapter for the Ikea Lack table to use push fittings for 4mm PTFE tubes. You need to drill 20mm hole trough the Table. (the adapter have 19mm shaft) With the M10 and the (R) G 1/8" fittings the PTFE tube goes through, which is why the…
This is used to block any balls that may fall out of the trough when transporting or while the playfield is fully raised. To install this, just clip it around the apron support next to the ball launch. This can be done from the bottom of…
Flat chick trough designed to save space and to be installed outside a cage. Created in 4 pieces to make it easier to print and avoid supports as much as possible. A v2 of the bottom piece is available if v1 doesn't fit well with your set…
Ameisentränke / Drinking trough for Sera 28mm test tube
Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 30% Filament brand: any Filament color: any Filament material: PLA Notes: I recommend minimum 3 walls for rigidity
I found on-set that our things were getting mixed together in the box and also were on display for any passer-by. These dividers help keep our things separate and hidden. Plus the flip lid can be opened with the back/side of your hand to…
A replacement Water Trough game Piece for the Smart Farmer Board Game.
I find the hopped on the Sage Barista Express Impress (SBEI) just a bit too small, and, because I keep it on a shelf, hard to fill. So I made this to make it bigger, and produce an engorged SBEI. The hopper extension ring and…
A simple plug for a water trough. Tapered from 32 to 44mm in diameter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16mm Infill: 10% Filament: Enotepad TPU Category: Outdoor & Garden
Using M10x1 thread for PC4-01 couplers
ich habe dieses Impossible Passtrough Model gemacht. Es funktioniert gut und ist ein toller Zeitvertreib!
My LACK enclosures filament rack is on top of the tables. To feed the filament to my printer I drilled a hole through the tabletop. Because the tabletop is hollow inside a little pipe was neccessary to lead the filament through the…
Alternative coolant "trough" for the Shariff DMC Mini CNC mill. Uses original screws.
Infrabel Mod. 28 Concrete Trough with Lid. As specified by the Belgian railway network maintainer. Serves primarily as a cable trough. Modelled at full scale - ready for you to scale to the needs of your needs. Image credits: Infrabel
tube pass trough fidget in this scale print at 0.20 mm layer hight
This model is a simple water trough suitable for a nativity creche, and is the same scale as this one: The model is approximately 1:15 scale. It's a single print part - the example photo is printed with Elgoo grey PLA. Attribution…
Hi, i just created the best passtrought, it is a both sided inside, you need to download all 3 files. Files “outside-1” and “outside-2%” are onle copy of each other. It is a perfect toy for math lesson when you are bored. WARNING! You…
Abreuvoir pour chien ou autres animaux, réglable et supporte une bouteille de 5 litres du commerce. Imprimer en PLA et PTU pour le ressort et le joint. Pour le blocage de la toise coulissante une vis 3M*8
Give those beasts(dice) of burden a well deserved rest at the trough. Hitch your dice to the post and settle in.
this is a pain paint pallet trough thingy for very liquidy paint, its deep.
This adapter accomodates up to 5x 100mL troughs from Tecan ( part number 10613048 or equivalent). The adapter itself is placed on any SBS-compatible site of the robotic worktable. I designed this adapter specifically to be used with the…
A replacement Water Trough game Piece for the Smart Farmer Board Game.
!! PLEASE NOTE, consider whether a 50mm pipe is really sufficient for your application !! Flat drain for drainage gutter aco drain for ht pipe diameter 50mm 7.7. 2023 - added drain filter v2
This model has been retired and only serves as a template for interested parties! MK2 → link Have you ever wanted to have your favorite filaments always on hand for manual multi-color printing or even for easy and quick loading? Are you…
PC4-M10 passthrough fitting mounts for 35x35 Aluminium Extrusions. Print as shown in the Sliced picture, Small hole at the bottom. Supports from Print bed only.
I made this simple clip/hook to hang string lights on my eavestrough. I have leaf guards installed and the store bought clips didn't hold well at all. I printed this in PETG with all infill being perimeter (I just set it to 20 to ensure…
This is a FFF printable cover for the Halot One Plus resin trough. It comes in handy when you leave resin on the trough overnight or longer. It offers protection from contaminates falling in and offers some reduction in odors. I printed…
I am using a hinged lid, and it would be convenient for me to have magnetic connectors on both sides of the lid. I've also tightened the holes for press-fitting the 5x5 magnets, scaled by z so that the magnets can sit flush on the edge,…
I designed this specifically for Labyrinth, but I assume it works for other machines. VHB the mount to the underside of the apron, and mount the led strip to it. the mount is 6mm thick. I used a 5mm wide led strip. This clears the trough…
A bracket designed to mount a specific solar panel from a specific set of string lights sold at Costco. Print in the orientation the model is provided. Printing with a brim would be beneficial. PLA not recommended.
super cool and satisfying passtrough fidget that is print in place (which means you don't need supports or assemble anything)
A bigger hole to hold bigger wires, for the gridfinity wire spool holder
I have several automatic drinking troughs/waterers ( https://shorturl.at/fKMTV ) for my pets and livestock and most of them fail when the floater becomes brittle, cracks and sinks. I couldn't find replacements easily so I designed one so…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
You'll probably need to adjust the dimensions of the various parts to suit the bottle you want to use. A plastic bottle is required for the assembly to work. Refer to the assembly drawing and exploded view to understand the assembly.…
Trough for hiding a display cable on the Bottom of an original Nintendo
Trough carrier for 25ml or 100ml troughs on the TECAN Freedom EVO decks. Instructions Print the front part (carrier-12) with default settings. Print the rear part (carrier-3) with supports. I used Lattice-like supports. Easy to break away…
the stl is unsuported only download it if you want to use your own support settings
Insect Watering Trough As it is getting warmer and warmer and the flower boxes on my balcony with the wildflowers - as well as my ‘insect hotel’ - are well visited by insects, I decided to create a small octagonal insect watering trough.…
BE AWARE - This model is purely for esthetics or fun and I don't recommend putting any sort of drinks on top of your computer. Well... I don't really know if there is any need to describe this "invention" :D. Basically it clips to the top…
This is a clip for my balcony trough/pot, which belongs to the bottom of the trough. Two of these clips hold the trough in place, so it won't bob in the wind. The clip is designed after the original one. It's best printed in PETG or ABS,…
This is a feed trough for the Breyer brand horses or any other animal of that size. Simple design
Reflects concentrated sunlight onto a pool or other body of water. Just attach foil or
Spare Trough/Drainline foot for everyone who already broke every spare left. ----------- Print Settings: Filament: I used PLA, works fine. PETG could be even better option Infill: 100% Layer Height: 0,15mm, first layer 0,2mm
Da es immer wärmer wird und die Blumenkästen auf meinem Balkon voller Blumen sind, habe ich beschlossen, eine kleine Insektentränke zu bauen. As it is getting warmer and warmer and the flower boxes on my balcony with the flowers I decided…
All the little plastic bits soon to litter your printer cabinet, just rake it out and let it fall not to the floor but to collect in these troughs. Perfect for the procrastinator or if you do not want to waste time on waste, it will be a…
Toto je jednoduchý model korýtkové spojky, který jsem vytvořil pro své studenty. Pomáhá jim vidět proč musí mít korýtka vůli pro stažení a proč se musí dodržet předepsaný utahovací moment. Skvěle se na modelu vysvětlují i různé techniky…
Passtrough Fidget Ein kleines, einfaches Fidget mit einer sauberen Spiralform, durch die man mit den Fingern durchfahren kann. Fühlt sich beim Benutzen sehr angenehm an und ist perfekt, um die Hände zu beschäftigen oder einfach als…
Minimalist Creality Space Pi PTFE Passthrough Clean, Functional Design: Stripped of unnecessary bulk and overcomplicated geometry, this model provides a clean, straight-to-the-point PTFE passthrough for the Creality Space Pi filament…
needed something to connect the hose to and break the air stream before entering a distribution box
this is a altered version of the sillyshell. i made it so you dont have to have any other thing to fire mega xl easily. so you can just be running around and when you see a shield you can just put this sillyshell trough your barrel and…
This 100mm ventilation system for a 24 mm double-glazed window requires 5 mm EVA foam to create sealing rings between the window glass and the pipe on both the inside and outside. You will also need a strip of EVA foam to seal the…
This is about an inch high, and five inches long.
This is a drinking trough for young chicks. It has a thread for standard PET bottles (dimensions taken from horrovac's model ). I prefer a small bottle in order to keep the whole thing stable enough. The FreeCAD file is attached so that…
