Search results: true

Sort order

410 models

P
PrintablesBlockhead Maker

True - Wire Bender for making Shallow Screws

For all makers out there making soft bates! Shallow screws are expensive and now with this tool you can make them yourself. Print instructions Video for how it works: https://youtu.be/zpEGzjKB8no Other needed components: Screw holder is…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
1,291
Likes
184
Rating
5
P
PrintablesTomáš Kostiha

TrueLife NannyCam H32 - holder

Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…

Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant

Downloads
423
Likes
27
Rating
4.62
P
PrintablesTheRooster

OpenLock/MagBall Dungeon Tile Bases - Supportless & TrueTiles

I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
35
Rating
5

držák kamery chůvičky TRUELIFE NannyCam V24 PRO

Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.

Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
1
Rating
0
P
PrintablesJoe

Multi-Tool - This contains the G-code file only -- Remixed for true multi-colour printing

This only contains the G-Code for printing on a Prusa Mini/Mini+ Added true multi-colour to the model, so that the bottom portion with the text prints completely flat without debossed text and uses a separate colour for the text on the…

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
6
Rating
0
P
PrintablesAsa

Vantrue N4 Cabin Camera and Screen Cover

If the light from the screen annoys you, here's a cover

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
1
Rating
0
P
PrintablesAsa

Vantrue N4 Dashcam cover for interior car camera

Printed in ASA so it doesn't warp, upright print no supports needed

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
2
Rating
0
P
PrintablesAaron Ladage

True GDM-10 condenser fan grill spacer for Edgewater replacement motor

If you replace the condenser fan motor on a True commercial cooler (in my case, a GDM-10) with an Edgewater motor , the fan blades will sit just slightly lower than with the original motor, causing them to brush against the grille. These…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P

Toyota Sprinter Trueno Kit Card (AE86 known from Initial D)

Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…

Downloads
3,109
Likes
634
Rating
4.4
P
PrintablesJerryie

AE86 Toyota Corolla Trueno kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
1,541
Likes
376
Rating
5
P
PrintablesBinaryValues

Hollow Knight True Nail

This is the True Nail from Hollow Knight.

Downloads
1,348
Likes
105
Rating
0
P
PrintablesVasichkin

Trash bags roll holder (True vase mode)

Trash/garbage bag holder (roll keeper) Model is in lightweight, easy-to-print, fast Vase mode. You can mount it anywhere in any position using double-sided scotch-tape as well as screws (holes should be made). Available sizes: Length:…

Downloads
862
Likes
313
Rating
4.5
P
PrintablesManifold3D

AE86 Toyota Corolla Trueno

Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…

Downloads
852
Likes
74
Rating
5
P
PrintablesZach Peters

DF54 True Zero Indicator

(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…

Downloads
844
Likes
41
Rating
5
P
PrintablesMarcElbichon

True-FLEX Featherboard with accessories (1/4-20 fasteners)

Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%). « TF_Featherboard.stl » need less material, but is a little harder to…

Downloads
626
Likes
86
Rating
4.86

Ichigo True Zampakuto || Dual Sword Cosplay

As we see at the beginning of 1k blood war in the anime bleach , the main protagonist ichigo gets an awakened version of his swords . I didnt see any available models for this cosplay so I made both the big sword and the second one he…

Downloads
591
Likes
212
Rating
5
P
PrintablesHD_Creator

True one-hand tape dispenser

Use case: One-hand tape dispenser for tape up to 18mm wide, typically “Tesafilm”, which is widely used in Germany for parcel wrapping and other household needs. What you need in addition to the 3D printed files: Almost nothing! I used a…

Downloads
576
Likes
478
Rating
5
P
PrintablesFlops

True Hybrid Dart Pusher for Nerf Stryfe

A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts. Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill. I printed mine out of PC…

Downloads
560
Likes
71
Rating
4.67
P
PrintablesCazGaming

Toyota AE86 Trueno Keychain

This is a remix of Dendeba's AE86, it was perfect size for a keyring so I added a small loop on the model which works perfectly! Link to Denbeda's original model - https://www.thingiverse.com/thing:4914137

Downloads
547
Likes
36
Rating
0
P
Printablescomcloudway

True Fruits Bottle Cap

Bottle cap for a 750ml true fruits smoothie bottle. Great if you want to use an empty True Fruits glass bottle as your daily-driver drink bottle, but you want a cap that is a little bigger and easier to open. Requirements: Filament (I…

Downloads
537
Likes
34
Rating
5
P
Printablesamzoo

Arrow Fletching Jig (True Helical, 3 Vane)

Fletching Jig for 3 vane arrows. I need a true helical jig and wanted it to be small enough to pack away. Uploading full Fusion 360 file for you to play with parameters (in images). I have added files for 4" vanes, 0.2875" shaft, 4 deg…

Downloads
452
Likes
60
Rating
2

True Universal Drybox

Makes swapping filament in a dry environment super easy. No more packing / unpacking spools when switching filament. A drybox is needed for filament because most 3D printing filaments are hygroscopic, meaning they absorb moisture from the…

Downloads
444
Likes
375
Rating
4.67
P
PrintablesEm_anu_3D

True Shikai Zangetsu keychain

This is the true shikai zangetsu keychain from bleach tybw

Downloads
383
Likes
34
Rating
5
P
PrintablesKAYMOST

OpenZ V16 Toyota AE86 Sprinter Trueno 90mm Wheelbase

A Toyota AE86 Model available for the open Z chassis V16 Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not matter PLA Does not matter Notes: advisable printing…

Downloads
376
Likes
54
Rating
0
P
Printables3Dmensional.de

True Fruits Candy Dispenser

This candy machine design uses a True Fruits 750ml smoothie bottle as a reservior. It works best with these chocolate lentils or other relatively small round/oval candies. I recommend 15% infill and 3 walls, also see my comments in the…

Downloads
350
Likes
70
Rating
5
P
PrintablesCSLR

True Innovations DPS 3D Insight Gaming Chair Lumbar Support Replacement

Replacement Piece For the True Innovations DPS 3D Insight Gaming Chair, This Connects The Rotating Lumbar Piece Under The Head Rest. You Will Need Hardware From The Existing Chair Since This Only Replaces The Rubber Arm. Installation…

Downloads
347
Likes
4
Rating
0
P
Printablesbaumwasser

Piggy Bank Lid for True Fruits

A simple piggy bank lid for the big (750ml) true fruits jars. Printed on a Mini+ with PLA.

Downloads
339
Likes
40
Rating
4.83
P
PrintablesFasaArg

Furious FPV True D V3.5 cover for Fatshark Dominator HD (possibly compatible with AKK Diversity RX)

2019-06-26: Since there are people selling my design around the world for the AKK Diversity RX i must assume that is compatible. Hope the people find it useful for this module too. Furious FPV True D V3.5 replacement cover for Fatshark…

Downloads
333
Likes
19
Rating
0
P
PrintablesNlKO33

truelife NannyCam V24 mount

Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…

Downloads
326
Likes
12
Rating
4.83
P
Printablese_Decker

True Fruits Salzstreuer

true fruits 250ml

Downloads
303
Likes
53
Rating
4.75

Truebeam Button Helper

This is USE AT YOUR OWN RISK device for a standard Trubeam console, I make no statement about whether or not using this is a good idea. Since the device pops on and pops off as needed, I am personally okay with the use. Therapists can use…

Downloads
299
Likes
8
Rating
0
P
PrintablesMicha Hainz

Smoothie Deckel true fruits

Smoothie Deckel mit Dichtung, zum wiederverwenden der Flasche

Downloads
294
Likes
11
Rating
5
P
PrintablesJamie G

Tyre Truer MKIII for slot cars 1/32

It all started with the idea to push the limits of the 3D printing to create a precision tool that I could have made out of metal instead. The first version was without real bearings so after a while the main bearing started to get…

Downloads
288
Likes
37
Rating
0
P
Printablesaviad turm

IKEA SKADIS True Parametric Boxes

While attempting to generate a customizable box using existing parametric designs, I encountered frustration due to the non-parametric nature of the box's rear hooks. Consequently, I have developed a novel 3D model that grants you precise…

Downloads
284
Likes
46
Rating
5
P
PrintablesN-Ender_3

AA Sobriety Chip Coin - 30 Days - To thine own self be true

30 Days AA Sobriety Chip with the message "To thine own self be true". The coin is thick enough so you can add the person's name and date underneath. You can print it in two colours by configuring your slicer, or just paint the letter's…

Downloads
278
Likes
14
Rating
0
P
PrintablesFufus

True Fruits storage Suspension

You will need supports

Downloads
278
Likes
58
Rating
5
P
Printablesder-pw

Bird feeder for 250ml True Fruits Bottle

I designed this bird feeder to reuse old True Fruits bottles. The dispenser can be mounted on the wall using a mounting plate. The dovetail connection allows the dispenser to be pulled up and removed to refill the bottle. 26.11.22: There…

Downloads
277
Likes
90
Rating
5
P
PrintablesJona Nolåkers

SSR Tire truer

It uses a regular RC car motor, and for my version I used a 4wd belt from a scalextric Ford Focus, but since the tension is adjustble, you should be able to find something that fits. An additional (and not yet fully developed) feature is…

Downloads
277
Likes
26
Rating
0
P
Printablescomcloudway

True Fruits Drink Bottle Cap

Warning Unless you somehow smoothed the layer lines, it is advised to not drink hard water, or liquids that contain sugar, as the mouthpiece might be hard if not impossible to clean properly. Use at your own risk. Requirements Plastic…

Downloads
273
Likes
33
Rating
0
P
Printables3Dmensional.de

True Fruits Candy Dispenser MK2

This is MK2 of my original model found here: https://www.printables.com/model/420037-true-fruits-candy-dispenser New features: Added a small cup to catch the dispensed candy Added a contraption around the bottom of the main body to keep…

Downloads
268
Likes
47
Rating
4.67
P
PrintablesHasenpups

True Fruits - Einfüllhilfe / Funnel

Easy funnel/Einfüllhilfe/Trichter for the big TrueFruits bottles/Flaschen (750ml).

Downloads
263
Likes
33
Rating
4.78
P
PrintablesGrummle
18+

The source marked this model as adult content.

Downloads
251
Likes
145
Rating
4.67
P
Printableszuensi

true fruits Bird Feeder

Bird feeder using a large 750ml true fruits smoothie bottle as a food reservoir. The larger bottle neck prevents bigger pieces like dried berries from clogging up the feeder. Prints fine with 0.3 mm layer height; supports might be needed…

Downloads
250
Likes
66
Rating
4.8
P
PrintablesLeithian9

True Fruits Spice Shaker

Convert your True Fuits Bottles into spice shakers! Fits 250ml and Ingwer Shot bottles by TrueFruits. Print with 5 top/bottom layers and 3 walls for 100% infill equivalent (with 0,4mm nozzle) This design is based on…

Downloads
238
Likes
36
Rating
4.83
P
PrintablesLankSSBM

Extruder Gear Clock - True 12:1 Ratio

This is a true 12:1 ratio extruder motor indicator! The main gear is attached to your extruder motor with a simple 8x3mm magnet, and as your extruder turns, the arms on this will spin like a real clock. Gears were created using Gear…

Downloads
227
Likes
39
Rating
4.67

True Fruits Cap 750ml

Ein Neuer Deckel für die True Fruit 750ml Flaschen mit Trinkhals. eine Handvoll vorteile bietet der neue Deckel. z.B er Rostet nicht, das Trinken ist einfacher und einfach zu drucken :) Das ist das Grundmodell. ein Stopfen und Neue…

Downloads
227
Likes
28
Rating
5
P
PrintablesThosa

#0073: 24x18 Bilderrahmen - 24x18 Pictrue Frame

EN: This is my 3D picture frame, The frame is completely printable. Suitable for canvases 18cm x 24cm x 1,5cm. You can easily adapt this frame to other canvas sizes with Sketchup, 3dBuilder or TinkerCad. You can see them in this video:…

Downloads
194
Likes
26
Rating
5
P
PrintablesMuurph

True Lid

This is a Lid for True Fruits Bottles. I was looking for a way to upcycle these True Fruits Bottles that left after drinking them. So as an owner of a 3D-Printer. I instandly had a Plan to do this. When I tested my first one, I noticed…

Downloads
193
Likes
37
Rating
5
P
PrintablesStar Blink

Vogeltränke für 750ml True Fruits Flasche

ENG: A simple bird bath that bolts to a railing. The span of the clamp is about 5 cm (~ 2 Inches). A support element is built into the clamp, which can be easily broken out. For the clamp, screw and connector I recommend 25% infill. Print…

Downloads
193
Likes
40
Rating
3
P
PrintablesFabian Haensch

powerCON TRUE1 Schuko Distribution

This is a simple 3D-Printed powerCON TRUE1 to Schuko adapter. It features a Neutrik Powercon inlet and 3 PCE Schuko outlets The design idea was to have a simple, robust and cheap power distributor. It uses long screws instead of inserts…

Downloads
186
Likes
25
Rating
0
P
PrintablesKyleK29

37mm Lens Filter Adapter for VanTrue N4 Dashcam

Certain versions of the VanTrue N4 dashcams do not have the mount for the CPL filters they (and other third parties) sell for these cameras. This model fixes that, allowing for any 37mm lens to be attached to the camera. The adapter is…

Downloads
186
Likes
8
Rating
5
P
PrintablesSushi

Camera Holder of TrueLife NannyCam H32 - faster print

Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…

Downloads
184
Likes
9
Rating
5
P
PrintablesModel Magic

Western Movies - True Grit - 1969

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
180
Likes
27
Rating
0

Xiaomi Mi True Earbuds Basic 2 ear hook

Xiaomi Mi Earbuds Basic 2 True Wireless ear hook so they don't fall out of your ear. They can even be placed inside the charging box (but you need to take them off to charge. Printed in ABS. 0.2 layer height. It also let me use a slightly…

Downloads
174
Likes
21
Rating
5
P
Printablestitokun

Toyota Trueno AE86 - Initial D

Toyota Trueno AE86 - Initial D

Downloads
169
Likes
20
Rating
0
P
PrintablesTarrant1701

Allen Hex Wrench holder for pegboards true 25mm spacing

Can print this “standing up” with tree supports for the pegs.

Downloads
166
Likes
19
Rating
0
P
Printableshollebread

Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape

Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…

Downloads
163
Likes
14
Rating
5
P
PrintablesTastelessWeeb

AE86 Trueno Keychain

Modeled after the earlier variation (if i'm not mistaken) with wider black margins. Model dimensions are approximately real-size so it's recommended to scale down for use as a keychain. Includes a top and side loop, so you will want to…

Downloads
161
Likes
24
Rating
5
P
PrintablesRheeno

true fruits moneybox

Hier mein Beitrag zum Thema Recycling/Upcycling. Damit könnt ihr eure leeren "true fruits" Flaschen (750 ml) einem neuen Zweck zuführen, nämlich als Spardose. Ich habe den Deckel "up-side-down" gedruckt, da sich die Stützen (organisch)…

Downloads
160
Likes
20
Rating
5
P
PrintablesAX

True 1U Rack Fan Cooler (V4)

V4 has been a community request since I technically made false claims, with the V3 being a 1U cooler. Technically, it was not right. But now V4 exists in either Version A or B. With two or three ducts, you are able to cool tight 1U slots…

Downloads
159
Likes
27
Rating
0
P
PrintablesPeter Müller

K1 Max Filter Case for Osimo A2 True HEPA/Carbon Filter

Da ich sehr viel ABS-Filament verarbeite, suchte ich eine Kombination von HEPA- und Carbon-Filtern, die den penetranten Geruch bei der ABS-Verarbeitung entfernt und den Ausstoss von Mikrostäuben verringert. Fündig wurde ich beim OSIMO A2…

Downloads
158
Likes
22
Rating
0
P
Printablesmaxitech

truelle maçon

truelle de maçon en porte clef

Downloads
156
Likes
55
Rating
0
P
Printablesgbombadon

True Triple Katana - blox fruits

Roblox Blox fruits - TTK Multiple models to print it 'as one' in either the star layout or the holstered layout; or print each one individually with removable scabbard - the Hilts, handle and blade are common. Colour the handles and…

Downloads
155
Likes
14
Rating
0
P
Printablesparalepsis

OpenForge Wyloch/True Tile-style Dungeon Stone Tiles

This is (the start of) my take on remixing Devon Jones's classic dungeon stone tiles into the True Tiles / Wyloch format (tops only). Just an experiment at the moment. These seem to be the most important properties: 1mm thick base for top…

Downloads
152
Likes
45
Rating
0
P
PrintablesNyhtfury

Earthborn Rangers Deluxe Tokens - Remix True to Size

Just got Earthborn Rangers with the deluxe token set, but needed an additional set. tradenmyr made a great set over on Thingiverse , but the tokens were slightly smaller and didn't have the painting done so I've updated that here.…

Downloads
151
Likes
14
Rating
5
P
Printableskssz2

Slot Car Tyre / Tire Scrubber Truer

A very simple, cost effective, robust, slot car tyre/tire scrubber for truing and balancing slot car tyres/tires for the cost of less than a coffee. You will need; 1. 2x Carrera 20366 replaceable braids 2. 1x PWM Controllers (Dimmer…

Downloads
150
Likes
24
Rating
5
P
Printablesanthan.cz

TrueLife NannyCam camera holder - Version v2

After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…

Downloads
132
Likes
8
Rating
5
P
PrintablesLuis

True fruits bottle drying stand / True fruits Flasche Trockenaufsteller

I have a small collection of true fruits bottles and I reuse them regularly. I wanted to have a drying stand for them just like the one for the Soda Stream bottles I designed. So I adapted the design to fit the true fruits bottles. There…

Downloads
130
Likes
23
Rating
4.75
P
PrintablesSaniainen

TrueTrac style differential for lego

Detroit Truetrac/Quaife style limited slip differential for lego. It's very similar to Torsen T-2, except it uses simpler one section long/tall gears. In my very limited testing, it feels like this has more slip friction than my T-2.…

Downloads
127
Likes
18
Rating
5
P
PrintablesPrint4fun

DF54 adjustable Indicator (true zero)

This is my adjustable version of "exactly indicator". It consists of 2 parts and the original screw is reuse. I designed an adjustment tool to make adjustments easier.

Downloads
121
Likes
7
Rating
0
P
PrintablesModel Magic

Western Movies - True Grit - 2010

Western Movies - True Grit - 2010 3D printable model.

Downloads
120
Likes
22
Rating
0

FPV Walksnail Goggles X TrueRC Patches Mount

🚀 Elevate Your Goggle Game: Walksnail Goggle X TrueRC Patch Holders! 🚀 Ahoy, drone enthusiasts! Tired of those clunky antennas making your Walksnail Goggle X unnecessarily bulky? Say goodbye to the oversized look and hello to sleekness…

Downloads
118
Likes
18
Rating
4.5
P
PrintablesPanda.FPV

ImpulseRC Apex HD TrueRC Matchstick Mount

Since I replaced the original antennas of the Caddx Vista, I also needed a new mount. So fix measured the antenna and created the mount.

Downloads
117
Likes
7
Rating
0
P
Printablesloans

Neutrik True1 tools

tools to help assemble or disassemble Neutrik True1 connectors.

Downloads
114
Likes
11
Rating
0

Finger extension brace (splint) (but better) - parametrised, true honeycomb infill (sturdier, durable layer binding)

Build instructions: set infill to honeycomb 20%, 0 bottom layers, 0 top layers, 0.3 layer height, 4 perimeters. Drop into cup of hot water after print and form it to fit your finger. Download v0 for a version closest to the original…

Downloads
111
Likes
29
Rating
0
P
PrintablesAaron Kominek

True One Piece Riser

Everything is the same as the original so print settings should be compatible. Use mouse ears or brim when printing to prevent warping, as mine did. The vents still break away like the original from JesusFreak. and the dimensions are…

Downloads
109
Likes
2
Rating
0
P
PrintablesFaasteer

Stand for TrueLife electric toothbrush

Simple stand for TrueLife SonicBrush Compact Duo and several spare heads. I made it because these toothbrushes have a slightly different dimension than the others and my wife and I wanted something that would match the other accessories…

Downloads
109
Likes
9
Rating
5
P
Printablescomet_prints

Ichigos True Shikai W.I.P

THIS IS A WORK IN PROGRESS I will update the description as I work on it. The two blades are broken up into pieces to fit on most average sized 3d Printers. There are 3/8 inch holes that will use rods of 15.5"/11.5"/27"/33.5"/15.5"…

Downloads
107
Likes
24
Rating
0
P
PrintablesSvHolz

Piranha Plant Piggy Bank lid - New Pipe for True Fruits (750 ml)

I made a new Pipe for the awesome Piranha Plant Piggy Bank lid from bigovereasy to use it on a True Fruits Bottle (750 ml).

Downloads
106
Likes
40
Rating
5
P
PrintablesSamotrel

True charging stand for PHILIPS MG5720

This is a custom-designed charging stand for the Philips MG5720 trimmer that does more than just hold your device. It features a unique lever-actuated mechanism that lets you hide or reveal the charging connector , helping you avoid one…

Downloads
100
Likes
70
Rating
0
P
PrintablesStigern

TrueNAS logo Badge/Plate

Simple three color badge, or plate if you like.

Downloads
100
Likes
10
Rating
0
P
PrintablesTom Yum

Trueno Key chain

Déjà vu I've just been in this place before !?

Downloads
97
Likes
7
Rating
0
P
Printablesuser01

HDZero Goggle TrueRC X-Air Fold Mount

Printed in petg with supports 2 x 16 M2 screws for the hinge

Downloads
97
Likes
15
Rating
0
P
PrintablesZakm0n

Hexx Case Tool Roll - TRUE Flat Bottom

For some reason, I had issues getting the "Flat Bottom" print files to work, so I took the STLs in cad and patched up the panels that are dished for the texture. My Voron simply refused to play well with the overhangs. I've only uploaded…

Downloads
95
Likes
10
Rating
0
P
Printablescrazy.biker_84

Walksnail TrueRC air X² antenna mount for Walksnail Avatar or Fatshark HDO3 Goggles

A simple mounting option to attach 2 TrueRC air X² antennas to the Walksnail Avatar or Fatshark Dominator HDO3. The mount is screwed to the two upper (omni) antennas. I've used carbon fiber reinforced PETG to print, but other filaments…

Downloads
94
Likes
9
Rating
5
P
PrintablesWaterclocker

Five33 ZigZag TrueRC Core Cherry Antenna Holder Mount

Just a quick tinkercad remix to fit the TrueRC Core and Cherry antennas. I don't have the frame yet, but original dimensions are respected.

Downloads
91
Likes
4
Rating
5
P
PrintablesMaWoKo_3D_Druck

True Fruits Trichter / Funnel 750ml

es gibt nicht besseres als ein Trichter der nicht verrutscht ;-) über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Downloads
91
Likes
10
Rating
5
P
PrintablesMaWoKo_3D_Druck

True Fruits Trichter / Funnel 99ml 250ml

Der beste Trichter für 99ml und 250ml True Fruits Flaschen

Downloads
90
Likes
4
Rating
0
P

Trueflame Sword

My version of the Trueflame sword, based on references I found online. The 3D Model is a full-size one handed sword, currently sized to 109cm. The split up STIL Files are suitable for 22 x 22 x 25cm FDM build plate. Down the centre split…

Downloads
88
Likes
34
Rating
0
P
PrintablesPedroelnegro

Držák TrueCam A7

lepící držák pro kameru Truecam a7 na čelní okno

Downloads
85
Likes
2
Rating
5
P
PrintablesFlashhawk

Truetypefont of the Recycling Symbols

Just a reimplementation as a TTF. This way, the symbols can be easily added to any model during the slicing process with the new text funtionality of PrusaSlicer 2.6. Recycle more!

Downloads
85
Likes
6
Rating
0
P
PrintablesDavid Hack

Truefruits 750ml Bottle Cap/ Lid (Variations)

These Caps replace the Caps for True Fruits Bottles (750ml) if they rust or brake There are different variations for different applications 0.2mm Layer Hight NO SUPPORTS (Exept the one with the tube outlet) Print the Cap itself in PLA or…

Downloads
85
Likes
6
Rating
0
P
Printablestjsoco

Mitsugi Ohno true Klein bottle

This 3D model posted on printables.com , is a copy of the Mitsugi Ohno true Klein bottle. Here is the story about the “true Klein bottle”. In 1892, mathematician Felix Klein first described the Klein bottle as an object that has a single…

Downloads
84
Likes
11
Rating
0
P
PrintablesJamie G

GV Tyre Truer MKII for slot cars 1:32 scale

An improved version of my previous Tyre Truer. The major revision is in the swing arm eliminating the cantilever tyre. Beefed-up the pulleys wheels and designed in one piece construction for the base mainly to to avoid possible…

Downloads
84
Likes
10
Rating
0
P
PrintablesMaik Snippe

DungeonHero Openlock TrueTiles

Prints flat without supports with 0.2mm layers.

Downloads
81
Likes
8
Rating
0
P
PrintablesHi_Im_Dave

True 4 inch Two-Piece New England Base Post Trim Ring with locking tabs.

This is a true 4 inch trim ring to go around PVC or equivalent decking posts. Will not fit around a 4x4 lumber post. Two locking tabs that are a snap fit. Add glue to them for a more permanent fit.

Downloads
81
Likes
15
Rating
0
P
PrintablesKN16

True Sight BUIS

Hello Adventurers, the developer Blinsky has created a fantastic new toy for you! This is the “True Sight” it’s a backup sighting system for all your ranged combat needs. Why is it called True Sight? Because I heard a Wizard say that…

Downloads
80
Likes
13
Rating
0

Skadis Cricut Truecontrol Knife Holder

This knife holder is for storing a knife without a cap, so it can be used even with one hand. I also discovered that it works perfectly for scissors. Print instructions In general, support is not needed.

Downloads
78
Likes
17
Rating
0
P
PrintablesFourflies

HDZero TrueRC X-Air brackets and thumbscrews by Fourflies

These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…

Downloads
77
Likes
13
Rating
5
P
PrintablesStar Blink

Insects water dispenser for 750ml True Fruits Bottle

ENG: An easy to print Insects water dispenser for the 750 ml True Fruits bottle Recommend to print it in PETG ----- GER: Ein leicht zu druckender Wasserspender für Insekten. Ich empfehle, das in PETG zu drucken.

Downloads
77
Likes
12
Rating
5