Search results: u3

Sort order

1,182 models

P
PrintablesPrusa Research

MMU3 printable parts

All printable parts for your Original Prusa MMU3. Before you start printing please read the instructions carefully. Depending on the option selected, you either receive all printed parts from Prusa or you have to print them yourself.…

Downloads
40,236
Likes
3,082
Rating
4.83
P
PrintablesPrusa Guy

Prusa CORE One MMU3 Community version

Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…

Downloads
3,232
Likes
1,526
Rating
4.27
P
PrintablesJorge

MMU3 Color test

Introduction This is a piece I made to test the Prusa MMU. It uses all 5 colors, and you can change the color to your liking in PrusaSlicer." Remember, you can change the color using shortcut keys 1 through 5, provided you've previously…

Downloads
1,221
Likes
87
Rating
4.64
P
Printablesticat

Loading aid for the MMU3 buffer segment R3

Threading the filament into the buffer is still very awkward for me. You have to remove the segmenter, thread the filament around the roll and then push it up to the MMU, start the loading process of the MMU and then reinstall the…

Downloads
1,154
Likes
188
Rating
4.97
P
Printablesbluex

Loading aid for the MMU3 buffer segment R4

Similarly to remix from @ticat_105850 , this remix significantly simplifies the insertion of the filament into the buffer (but uses newer R4 segments). Simply insert the ribbon fully into the cassette, push filament all the way into the…

Downloads
1,043
Likes
264
Rating
4.92
P
PrintablesVictor

Prusa MK3s+ and MMU3 - Orca Slicer profile

Working profile in Orca Slicer for a Prusa MK3s+ and MMU3. Tested with 1000+ tool changes with no cloggs and only one user error :D This is no longer getting updated since I sold my MMU3. Video guide Step-by-Step video guide Instructions…

Downloads
980
Likes
67
Rating
5
P
PrintablesDenholm365

MMU3 Ultimate Spool Holder

Spool holder compatible with MMU3 layout thanks to the filament guide included into a side part. only one specific side to print if you want to adapt your Ultimate Spool Holder for MMU3 layout For assembly, I advice to position cylinder…

Downloads
643
Likes
103
Rating
5
P

MMU3 Label Plate with Custom Colors - MMU

I wanted an orange label plate to match my orange MMU3. Since I expect the label sticker in the kit box will be for a black MMU, the colors might not be ideal. I copied the design of the actual label sticker as best I could do. The…

Downloads
461
Likes
73
Rating
4.71
P
Printablesfiretech

Horizontal MMU3 Buffer Front

This modified/kit-bashed buffer segmenter (front plate) for the MMU3 cassette buffer, in combination with @Melvin_131612's excellent MMU3 buffer mount allows the buffer to be mounted horizontally, lying down on its side. I made this…

Downloads
380
Likes
75
Rating
4.91
P
PrintablesPHILTUTTLE

MMU3 Filament Feed Tool

I designed a tool to help feed filament through the MMU3. I was getting annoyed with having to loosen the screws to rotate the Idler Body to aid in pushing the filament into the Front PTFE Tubes. Super quick print, I went with 0.2 layers,…

Downloads
331
Likes
110
Rating
5
P
Printables4suke

Top Loading Buffer Segmenter for MMU3

This attachment adds a spool buffer mounting port to the top of the Cassette Buffer. This attachment is made by modifying the official segmenter-R3.stl file. The usual rear attachment port is retained, so you can use either the top or the…

Downloads
298
Likes
74
Rating
4.83
P
PrintablesJLTX

Easy MMU3 Purge Calibration Tool for MK4 and other Nextruder models

This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…

Downloads
258
Likes
98
Rating
5
P
PrintablesReesesben

Wall mountable MMU3 PTFE tube holder

This is a remix of Prusa's mmu3 PTFE tube manager that lets you screw it into the wall.

Downloads
225
Likes
27
Rating
5
P
PrintablesTedd007

MMU3 Buffer: colored, covered, upright

If you don't want to access your MMU buffer from behind but from above, this is exactly the right thing for you. In this version the buffer has been rotated 90 degrees so that the cassette slot is on the top . This has the great advantage…

Downloads
221
Likes
77
Rating
5
P
PrintablesNikolasZ

Ultimulti MMU3 with double lock

What is included here are the files that you need to print to get the dual lock, which is the Idler Body, the Pulley Body, and the right Lock. You need an extra M3x35 screw with a spring and an M3 square nut, that you should have gotten…

Downloads
216
Likes
47
Rating
4.6
P
Printablesn8

Core One MMU3 mounting brackets compatible with top acrylic panel

Although the lite version of the MMU3 mounting brackets gets the job done, it requires the mounts to be clipped on the lip of the metal top rail. This design prevents the use of the top acrylic panel and interferes with proper chamber…

Downloads
168
Likes
37
Rating
5
P
PrintablesJanoMorano

Super Mario Colored - MMU3

Here is another colored model, I am sorry not providing real picture of the print, there is non yet. As soon as I print it out I will modify the pictures here. If you like it - support Szbalasz.

Downloads
140
Likes
13
Rating
5
P
PrintablesRoman Huante

Prusa MMU3 Low-Friction Drybox Filament Buffer

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…

Downloads
132
Likes
78
Rating
5
P
PrintablesEagleEi

Buffer box MMU3 for MK4 better Filamentsupport

This version helps all those who are looking for a special solution to optimize filament routing. This version allows the filament routing to the MMU to be perpendicular without a radius and reduces the bends. This version is also 100%…

Downloads
111
Likes
31
Rating
3.5
P
PrintablesKrosta

MMU3/MMU2s Buffer holder in back of Original Prusa Enclosure

MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…

Downloads
97
Likes
29
Rating
5
P
PrintablesThat Chair

Feathers McGraw For MK4S MMU3

A modified version of the Wallace and Gromit Feather McGraw statue originally modeled by @JWcph, with colorings for MMU3 (pink, white, black, orange, and another for eyes needed)

Downloads
76
Likes
7
Rating
5
P
PrintablesEngineerDude

Stabilizer Bracket for the MMU3 Injection Molded Spool Holders

This solves a problem with the MMU3's “injection molded spool holders” which are, in my opinion, inherently unstable . Due to the complexity of the five-spool setup and multiple moving/unconstrained parts, the spools have a tendency to…

Downloads
71
Likes
18
Rating
5
P
Printablesunit

MMU3 Center Spacers for MK4/S frame

Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...

Downloads
64
Likes
11
Rating
5
P
PrintablesSp4m

Unofficial MMU3 'Quality' print GCODE and Process for PRUSA MK4 (July 2024)

As of July 5, 2024 the official GCODE for printing the MMU3 printable parts is done with the Print settings configured for ‘SPEED’ rather than ‘QUALITY’ and makers (myself included) have reported problems using the provided file. This…

Downloads
64
Likes
5
Rating
5
P
PrintablesGreenParrot

MK3S+ and MMU2S MMU3 Big Einsy Out-facing Case with DB9 socket

The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…

Downloads
62
Likes
10
Rating
5
P
PrintablesPaul

Modified MMU3 Selector (very slight)

The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…

Downloads
58
Likes
10
Rating
0
P
PrintablesPavel M. Blaha

SKS Slavia Coaster (MMU3/XL Multi)

Simple dual color coaster with a SKS SLAVIA logo on it.

Downloads
56
Likes
5
Rating
5
P
PrintablesCADabra

lowered MMU3 frame holder

This is a remix of the original mmu3 frame holder in order to gain slightly more overhead clearance above mmu3 body. The selector is partially hidden behind the selector, but still can freely move to both ends. I don't remember the…

Downloads
54
Likes
14
Rating
3.5
P
Printablesrbx;-)

Muliticolor / shroud testcube for MMU2 / MMU3 - free sphere inside -

Testcube for mk3s with mmu I also use the test for the different shrouds - you can see from the sphere how even the air distribution is

Downloads
52
Likes
5
Rating
5
P
PrintablesNdyah

flat xlcd cover + mk4s and mmu3 text

just an edit for the flat lcd cover

Downloads
49
Likes
18
Rating
0
P
Printablesjay2jay99

Fixed MMU3 Idler Body and Pulley Body Without those squares

I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has…

Downloads
48
Likes
3
Rating
0
P
PrintablesJean romain

Glissière pour Spools holder MMU3 2Kg

Glissières pour élargir le support de bobines d'origine du MMU3 et poser une bobine de 2kg/1Kg/500g ect...

Downloads
43
Likes
3
Rating
5
P
PrintablesAnheledir

Remix for MMU3 / MMU2S, 5 Spool auto rewinder for Repkord Repbox V2.3 with slip-rod system

You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…

Downloads
36
Likes
8
Rating
0

XYZ Cube for MMU3/XL 5Tool

"Enjoyed this? Tap Like, give us a follow, and check out the rest of our models—there’s lots more to discover!"

Downloads
32
Likes
6
Rating
0
P
PrintablesHedo3D

MMU3 buffer hanger and corner ptfe support

Hier eine Möglichkeit den MMU3 Buffer aufzuhängen. Ich habe die Strebe an den Segmenter geklebt. Die kleinen haken in entsprechendem Abstand an die Wand geschraubt und schon kann man den Buffer einhängen. Da es sich in meiner…

Downloads
32
Likes
14
Rating
0
P
PrintablesMike B

MMU3 Buffer Mounts

The M3 Square nuts (2 each) are sized for the more commonly available size (2.3mm thick) - the Prusa nuts are slightly thinner (1.7 mm) and will slide out of the slots. When used just to hold the buffer plates together, 2 M3x25 or M3x30…

Downloads
25
Likes
5
Rating
5

Strikethrough MMU3 Label-Plate Modded for MMU printing

I really like this design since I've had all three mmu units. another reason was I wanted an orange label plate since I chose to print my mmu3 in orange like the first one I got years ago. the first one i printed was text up and i feel…

Downloads
25
Likes
3
Rating
5
P

MCS 2 - Space Saving Spool and Buffer System for MMU3 for Core One and MK4S

Intro Changelog: Aug 29, 2026 - Added a hole guide part, a small optional part to glue onto the open adjustment coupler to aid in filament insertion March 1, 2026 - Added several Core One Buffer parts, created new universal spool hub…

Downloads
17
Likes
9
Rating
0
P
PrintablesPavel M. Blaha

PRUSA RESEARCH drink coaster (MMU3/XL Multi)

Simple drink coaster for your coffee.

Downloads
11
Likes
4
Rating
0
P
PrintablesPavel Souček

GHS05 Korozivní látky a žíravé látky MMU3

Určeno pro MMU3 a zrnitou podložku, rozměr 200x200x3mm. Prusa MK4, MK4S s MMU. Ideálně PETG. Barva základní bílá, červená, černá.

Downloads
8
Likes
2
Rating
0
P
PrintablesMIRE

Active Smart Rewinder for Prusa MMU3 - stand-alone and CORE CUBE integration avoiding the usage of a buffer.

New Firmware V3.00 released!!! For details see Update. Neu Firmware V3.00 veröffentlich!!! Details unter Update. Introduction / Einführung Smart Rewinder is premium upgrade for MMU3. It's a sensor equipped, microcontroller-managed ative…

Likes
326
Rating
5
P
PrintablesDavid

MMU3 UltiMulti Printable Parts

Ultimulti MMU3 project is a DIY multi-material solution developped in parallel with the Original Prusa MMU3, with the ease of use and reliability being the two key improvement objectives, while still maintaining a reasonable…

Downloads
4,374
Likes
1,282
Rating
4.97
P
PrintablesSanka

MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox

This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…

Downloads
3,304
Likes
971
Rating
4.95
P
PrintablesPrusa Research

MMU3 Enclosure addon

Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…

Downloads
2,790
Likes
388
Rating
4.67
P
PrintablesIVDx Consulting

Dry boxes for MMU3 filament feed

Further information and build tips are on this YouTube video:

Downloads
2,114
Likes
324
Rating
4.25
P
Printablesbkerler

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Downloads
1,961
Likes
222
Rating
4.92
P
PrintablesSam

Spool Holder & Buffer for Core One MMU3 Community Version

CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…

Downloads
1,840
Likes
840
Rating
4.98
P
PrintablesJanoMorano

Stitch - MMU3 colored

I colored parts with my kids, ideal for MMU3 - printing time on MK4 is 14h.

Downloads
1,652
Likes
297
Rating
5
P
Printablesbkerler

MK4S w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…

Downloads
1,521
Likes
214
Rating
5
P
PrintablesPaul

MMU3 Cassette Compatible Buffer

This unit is to replace some of the stock MMU3 buffer while using the new cassette system. I have included a bracket to hang the buffer assembly from the back wall of the enclosure but it may not allow the proper clearances as I have not…

Downloads
1,404
Likes
332
Rating
4.8
P
Printablessblomfield

MMU2S/MMU3 PTFE Tube Organizer/Guide

Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…

Downloads
1,401
Likes
269
Rating
4.94
P
Printablesdjedje_zr7

THE sanding stick tool (U3)

Garage Set 6 : THE Sanding stick tool For Workshop sand paper 38mm (Parametric wide in fusion 360, rate and ask me for file) UPDATE U1 : The blue screw ring #2 was to long. U2: Improve yellows part. Mount instruction : Put #2 screw Put…

Downloads
1,385
Likes
482
Rating
4
P
PrintablesA. Fouani

MMU3 cassette PTFE fitting (collet)

PTFE tube fitting (Collet) for the MMU3 Cassette assembly, i went into upgrading my MMU2s to MMU3, upgraded from official printed parts, had almost everything in my inventory except for the collets, searched online stores but could not…

Downloads
1,353
Likes
194
Rating
5
P

MMU3 PC4 m10 Rear Connector

I removed the existing collet hole spaces, slightly extended the back of the R3 back for clearance, and then added a simple design to hold the five threads for PC4M10 screw in connectors. Fusion 360 file included. .3mf with painted…

Downloads
1,346
Likes
210
Rating
4.88
P
PrintablesHeidi Makes

Multi Material Palette - Quick Test Print for MMU3

This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…

Downloads
1,309
Likes
66
Rating
5
P
Printablesbluex

MMU3 Cassette Compatible Buffer for Prusa Mk4 / R4 Casettes

Remix of the great, compact filament buffer by @Paul_75970 that makes it compatible with the MMU3 R4 cassettes (Version B). Since I also wanted to use the remix of R4 cassettes , I couldn't use @mikedmor remix which squishes the…

Downloads
1,307
Likes
408
Rating
4.94
P
PrintablesLegufix

MMU3 PTFE tube guide

Because the filament is fed into the MMU unit at quite an angle in my buffer arrangement, I sometimes had the problem that the filament was pulled in by the pulley in such a way that the Idler output PTFE tube was not met (indicated by…

Downloads
1,298
Likes
364
Rating
4.93
P
PrintablesPosix

Purge calibration tool for all MMU MMU2S MMU3 on MK3 MK4

Update 16-Jun-2024 : With the amazing contribution of @poelstra_2112725 on MK4 with MMU3, we have achieved more than one color changes per test print, to a maximum of four. Amazing idea to print the numbers before the purge block so that…

Downloads
1,129
Likes
301
Rating
4.78
P
PrintablesJorge

Storage Tree - Leaf for PRUSA Tools - MMU3 Compatible

Introduction This module is part of the Storage Tree project . there’s no need for an MMU on this project. Only one material change. But there is a MMU3 prepared files if you have it In case you've come across this model and are unsure of…

Downloads
1,124
Likes
1,024
Rating
5
P
PrintablesDiscoJon

**UPDATED** Integrated Spool Holder + Buffer for Core ONE & MMU3 MKII

Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…

Downloads
1,103
Likes
677
Rating
4.96
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Downloads
1,012
Likes
324
Rating
4.86
P
PrintablesPrusa Research

MMU3 Enclosed printable parts (for Core One)

All printable parts to convert your existing Original Prusa MMU3 (for MK4S) to Original Prusa MMU3 Enclosed (for Core One). Before you start printing please read the instructions carefully! You need to source additional parts listed in…

Downloads
990
Likes
205
Rating
4.33
P
PrintablesPrusa Research

MMU3 Lite printable parts (for Core One)

All printable parts to convert your existing Original Prusa MMU3 (for MK4S) to Original Prusa MMU3 Lite (for Core One). Before you start printing please read the instructions carefully! You need to source additional parts listed in the…

Downloads
966
Likes
174
Rating
4.71
P
PrintablesDeimosfr

All in one calibration test Gcode for CoreOne/MK4/S with/without MMU3

The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…

Downloads
872
Likes
69
Rating
5
P
PrintablesDavidGray

MMU3 PC4 M10 Adapter

PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.

Downloads
829
Likes
145
Rating
4.92
P
PrintablesMykal451

MK3s+ MMU2 & MMU3 Filament Indicator Cover

New Models added, Hexagon, Ring and Rectangular. Need to give credit to ticktock for the original idea. The indicator uses a green 1206 SMD LED and 22k-ohm SMD resistor. Wanted low current draw and low brightness from LED. Obviously the…

Downloads
799
Likes
174
Rating
5
P
Printables3DMakerNoob

More Compact MMU3 Community Build - Prusa CoreOne

After assembling Sam's very tidy MMU3 Community version, I decided to make a few slight modifications to save space on the width of the whole unit. The main modifications are: Buffer Cover: Reduced width by around 2mm. This saved some…

Downloads
784
Likes
322
Rating
4.89
P
Printablesdancan13f

Prusa Core One/+ MMU3 Install and MMU3 Setup

In early 2025, I replaced my two PRUSA MK4S printers with two PRUSA CORE ONE printers (one assembled and one kit). The second MK4S printer had the MMU extension; I kept this accessory to remount it on the one delivered as a kit. I…

Downloads
762
Likes
313
Rating
5
P
PrintablesJacopo Tediosi

Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix

I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips. On Printables I found the PTFE tube clips by @Samotrel , which were close to what I needed, but they don't tighten the tubes enough and they…

Downloads
760
Likes
69
Rating
5
P
PrintablesKmanSweden

Reset button for MMU2 and MMU3

Here is the part that is missing from the MMU2 & MM3 kits. The thing often referred to as "the button" in the manual. The reset button. No more looking for something long and small to press the button with. Its a 4 minute print…

Downloads
759
Likes
154
Rating
4.88
P
PrintablesCuttin3ds

Doraemon for MMU3

Doraemon figure, multipart model prepared and painted in Prusa Slicer for MMU3. Blue one in two versions.

Downloads
753
Likes
42
Rating
5
P
PrintablesMelvin

MMU3 buffer mount

I modified the plate holders to be able to mount them with 3.0mm screws. This way I was be able to mount it straight on my Ikea Lack enclosure. Now I am be able to feed the filament from my repbox on top, to the back side of the Ikea Lack…

Downloads
749
Likes
140
Rating
4.85
P
Printablesdancan13f

Prusa MMU2S/MMU3 Slot Buffer Holder

This MMUS Slot Buffer Holder uses this others parts : Numbered Slot Covers by cjbeck : https://www.thingiverse.com/thing:4540766 See the Assembly.pdf file.

Downloads
723
Likes
140
Rating
4.55
P
PrintablesToanN

MMU3 Label Plate

I upgraded from MMU2S to MMU3 , but the MMU Label Plate file seemed to have no text for multi-color printing, so I made a copy as close as possible to the original. Printing is very simple, right click and split to get multi-color printed…

Downloads
707
Likes
70
Rating
4.94
P
PrintablesTS-3D

MMU2S/MMU3 5 Color test

model with 5 bodys

Downloads
677
Likes
16
Rating
4.88
P
Printablestrudslev

Melting Rubik's Cube / MMU3

I took the original model, colored it, and removed some unused parts that seemed to interfere with the print. Then I reordered all the parts, so it's super easy to change colors (to a seven-color print (if you have two AMS'). Printing…

Downloads
669
Likes
193
Rating
5
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
Printablessh4q

MMU3 original Prusa Enclosure Buffer Plate Holder

English: You need 3x M3-Nuts and 3x M3 Screws with a minimal length of 12mm. Furthermore you need to print 4x my remix of the original plate holder (small hole on one side).…

Downloads
657
Likes
152
Rating
5
P
PrintablesNLarson

Prusa Mk4/MMU3 & Mk3S/ MMU2S Tower Print Buffer

August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…

Downloads
612
Likes
230
Rating
4.57
P
Printablesunit

MMU3 Buttons

MMU3 Buttons which perfectly fits micro switches and MMU3 electronics lid. Printed from Prusament PETG

Downloads
603
Likes
163
Rating
4.86
P
PrintablesChris Hill

MMU3 mounting kit for Original Prusa Enclosure

I wanted my MMU3 buffer and spools to be entirely contained within the Prusa Original Enclosure. So I made a few parts to help: Buffer plate holders to use as mounting brackets (above or below the hinged lid) Filament guides for both…

Downloads
577
Likes
189
Rating
4.73
P
PrintablesAnachronist

MK3.9/MK4 Nextruder main plate for MMU3, modified for flex filament

According to the MMU3 assembly instructions , you shouldn't print your own Nextruder main plate! Instead, Prusa recommends using the one supplied because FDM printing cannot produce the same quality. The kit also comes with an extra main…

Downloads
560
Likes
101
Rating
5
P
PrintablesAlex McIntyre

MMU3 CORE One mod with stock top cover

This is my take on a ‘lite’ CORE One MMU3 upgrade, but one that allows use of the stock top cover and vents. The MMU3 unit is angled flat and moved down a bit, leaving the filament to skim the top of the case, and the cover is raised up…

Downloads
554
Likes
201
Rating
4.86
P
Printablesradiojack

Minions (Despicable Me) by @erikaheidi - MMU3 Version

Here are the fantastic Minions created by Heidi Makes ( @erikaheidi ) with coloring added using Prusaslicer. The 3MF is configured for four perimeters and 140% of the original size for added strengh in the arms and other thin parts.…

Downloads
531
Likes
95
Rating
5
P
PrintablesAtkc001

Extreme Benchy 5 COLORS Test print MMU3

Extreme Benchy 5 COLORS Test print MMU3.

Downloads
522
Likes
32
Rating
3
P
PrintablesHedo3D

PRUSA MMU3-Buffer filament threading support, Loading aid

update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…

Downloads
517
Likes
127
Rating
4.96
P
PrintablesVictor

Prusa MK4(S) and MMU3 - Orca Slicer profile (Beta)

Note: This profile is no longer being worked on. This profile was originally created because many people requested a Prusa MK4 with MMU3 profile. I don’t own a MK4 myself, so the profile is untested by me. While I did receive a bit of…

Downloads
514
Likes
40
Rating
5
P
PrintablesBald-har

MMU3 0.25, 0.3, 0.5, 0.6, 0.8 Nozzles

Update 13-10-2025 With the update to PrusaSlicer 2.9.3 , Prusa now includes native support for the 0.6 mm nozzle . In the new printer definitions, I removed the 0.6 mm nozzle from the Add_MMU tool, since it’s now automatically supported…

Downloads
512
Likes
83
Rating
5
P
PrintablesTom

MMU3 Pointer

I wanted a better indication of what filament is currently loaded. So I designed this pointer, which you can simply put on top the selector front plate. It is held by friction. No supports needed Designed for 0.2mm layerheight and 0.4mm…

Downloads
508
Likes
137
Rating
4.96
P
PrintablesFreedomMaker

Wednesday Addams Family Bust - MMU3

Wednesday Addams Family Bust - MMU3

Downloads
507
Likes
92
Rating
5
P
PrintablesResin_Chopper

MMU3 Selector pc4 m10 front plate

Selector front plate with pc4 m10 coupling for MMU3

Downloads
505
Likes
67
Rating
4.78
P
PrintablesGiantBrain

Printable MMU3 Coupler

Printable MMU3 Coupler A printable alternative to the original metal coupler. Works finde for me, you need: 4 x M3x10 screws 1 x M3x6 screw 1 x M3nS nut Print instructions Simple print No support needed PETG on 0.2mm , 100% Infill and 6…

Downloads
498
Likes
81
Rating
4.75
P
PrintablesGeekware

MMU3 PTFE Holder for PC4-M10 Fitting

Printed with PETG, 0.4mm nozzle, 0.2 layer height, 20% Grid infill, 3 perimeters, no supports required.

Downloads
484
Likes
75
Rating
5
P
PrintablesPeter

MMU BOX – Rewind Buffer System for Prusa MMU3 (Modular Multi-Material Filament Management)

MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…

Downloads
478
Likes
648
Rating
4.85
P
PrintablesMelvin

Ikea lack mmu3 buffer holder

I remixed the segmenter-R3 from : https://www.printables.com/model/531604-mmu3-printable-parts https://www.printables.com/model/638915-closed-segmenter-mmu3 I now made another remix of the mmu3 buffer segmenter. I designed one which is be…

Downloads
476
Likes
122
Rating
5
P
Printablesferokolotoc

MMU3 buffer holder(for IKEA LACK enclosure v2)

This is a remix of original prusa mmu3 buffer holder. No supports are needed to print this file. Part 2: https://www.printables.com/model/610056-mmu3-top-ptfe-holderfor-ikea-lack-enclosure-v2 I made this model so i could keep my spools on…

Downloads
474
Likes
88
Rating
5
P
PrintablesPrusa Research

MMU3 for CORE One L parts

Description: All parts required to convert your existing Original Prusa MMU3 (for MK4S or CORE One / CORE One+) into the Original Prusa MMU3 for CORE One L . This set includes everything needed to upgrade your current MMU3 unit to be…

Downloads
459
Likes
62
Rating
5
P
Printablesjvitry

Right-side MMU3 mount for Prusa CORE ONE

This custom mount allows you to install the MMU3 (Multi Material Upgrade) on the right side of the Prusa Core ONE, replacing the stock spool holder. It integrates cleanly into the machine without any drilling or frame modification, while…

Downloads
451
Likes
220
Rating
4.64
P
PrintablesJavier M. G.

Prusa Enclosure buffer adapter MMU2S/MMU3

This is a printable model for the Original Prusa Enclosure with the buffer of MMU2S/MMU3. How to print Use the default Prusa Slic3r Settings for PETG or ABS/ASA. No supports required. Printed with layer 0.2. Parts to print To use this…

Downloads
440
Likes
109
Rating
4.93