4,778 models
These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
XT60 is often used as general purpose connector for low power devices and sometimes needed to connect XT60 to regular PVC 2pin 1.5 mm^2 cable. This adapter allows esthetically connect XT60 on the same way as it done in regular AC socket…
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
My laser cutter is up on risers for rotary engraving so I didn't feel like laser cutting the ruler, here's a 3D printable version of it.
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
I added the fusion file, so you can remix it. The screw is a tight fit so I resized the reel to a 102% for the print file, which worked for me, otherwise feel free to adjust it to tolerace of your chosen material and printer. This size…
Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…
Within this box fits a Shelly 1 or 1PM and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. Update 12/07/2022: added…
Simple bolt used to hold the screen in place for the Gaggiuino
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Recently the usb-c housing on my phone charger (charger for Samsung Galaxy s10, but probably fits many others) broke and one part got lost so I couldn’t glue it back together. The connector itself was fine so I decided to print a new…
Using the original pieces and this new size, you can now insert a 18"x24" piece of plexiglass without cutting. To get to 18" use: 2 corners, 1 six inch side, and 1 - 214mm side. To get to 24" use: 2 corners, 2 six inch sides, and 1 -…
Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Cable Connector Housing for USB-C Power Delivery Module PDC004-PD This 3D model is designed for a custom cable connector housing, specifically for the USB-C Power Delivery module PDC004-PD. It is used to create a charger adapter for the…
WARNING: THE USE OF THIS MODEL INVOLVES WIRING MAINS VOLTAGE CABLES (240 V IN THE UK). DO NOT PROCEED IF YOU'RE NOT COMFORTABLE DOING THIS! I like to be able to switch on/off electrical equipment in groups that are only ever used…
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece. The back piece is not completely…
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: Housing for USB-C Power Delivery module PDC004-PD from Amazon or Aliexpress. You can choose modules with different…
This strongly cooled housing is made for a multimedia center application and allows the RaspberryPi 4 to stay cool even at extensive load, like when playing 4k video. It is made to hold the RaspberryPi 4 itself, a 5V DC-DC buck converter…
This housing was designed for the WMYCONGCONG KY-040 Quadrature Rotary Encoder Module ( https://www.amazon.com/gp/product/B07B68H6R8/ ). Print instructions I've included a captured image of the slicer window showing the recommended…
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Please have a look at the Vimeo video here . The Escura Hasselback focusing screen spacer & viewfinder holder has a lower height and a tighter fit compared to version 1 . Version 2 is a bit more delicate and should be handled with care.…
Pomůcka slouží k usnadnění skládání šňůrek z rovného pruhu látku šíře 35mm s využitím staré laminovačky. Celý proces překládání a zažehlení vyžaduje 2 pomůcky (2 průchody pruhu látky), jedna přehýbá okraje ke středu látkového pruhu, druhá…
This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…
Housing for CVBS/AHD camera of Mercedes Benz license plate lamp. You can use this adapter / fixture for camera, which comes with android auto headunits, as replacement of original transparent plastic in licence plate light or combine it…
This is an alternative housing and placement of the Nextion24 LCD screen used for Nextion based Gaggiuino. The housing has an an opening for the SD card slot at the bottom and attaches to the cup warmer plate by magnet. The two small…
This fan duct is designed for Snapmaker J1 parts cooling and heat break cooling. Cooling performance is improved by using a 5015 blower fan. *However, the cooling performance is slightly inferior to the previous version. But, cooling can…
6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert I wanted some knobs that matched the blue CF arm. https://www.bulletpointmountingsolutions.com/ Here is my fix. I used 3D Fuel PRO-PCTG (Cobalt Blue)…
Housing for MP1584 Step Down
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front lines are struggling to keep themselves safe. To try and help I have designed a quick and easy design of a face shield…
3nd example with the use of TULAS. The flexible loop connection is made with a few cm's of TPU filament. Pause at 5.8mm to add the magnet Ø8x5. For more info on TULAS, how to connect the filament and how to use it with your own models:…
Log housing for use with geocaching. See attached “Log housing for 35mm film canister how-to.pdf” for details.
It's designed for ⌀8*2.7 mm magnets and for a 40 mm wide steel girder, but the dimensions of box, wall thickness, pir sensor eye position, spacing, magnet size can be changed in the first lines. It also might be needed to change the arch…
The housing for my socket broke quickly, as the plastic was very cheap and thin. I've designed this replacament part which is much stronger. My socket is from GTV, but I've seen the same thing under different names, so it will probably…
Simple , pratique , efficace, aéré , léger, avec porte, et plusieurs fixations pour bien ranger les câbles . Impression sans support , tout y est . Et aussi un petit trou pour bloquer l'écrou en T afin de fixer la vis. Il vous suffit de…
Embedded/ Integrated Housing for IMOU IP Camera into ceiling. COQUE encastrée pour camera IP, marque IMOU (AMAZON)
What's more repetitive and intriguing at the same time than Socialist's housing system made of prefabricated concrete slabs. This was an inspiration for a tessellating tile showing a small part of Eastern Europe - housing blocks and green…
I've added 2 holes for the screw heads for using with the Cable Cover. You need 3x M3x8mm
Housing 1 for a module. Housing_2 for two modules, I use these boxes with the XL4015 DC/DC 5A converter module, powered by a 12V battery, to adjust the voltage to different components of my telescopes. Each casing requires four Ø3x8 mm…
This is a basic box to mount an ESP32 Max v1.0 Development board and four single MAX6675 modules (spi bus) that are compatible with K-Type thermocouples and a local display (i2c bus). The intent of this project was to be able to remotely…
This is a Bahtinov Focusing Mask for a QHYCCD miniGuideScope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…
The key hole on my 2008 Nissan Titan key broke, so I designed this custom housing to securely hold the key and get it back on a key ring. This model is split into two identical halves— be sure to print it twice . The design includes: A…
The material used is PETG, except for the cover piece, which is printed with natural PLA to better visualize the pilot lights. The material used is PETG, except for the TAPA piece, which is printed with natural PLA to better visualize the…
I needed a way to get power into my dry box and was looking at was to implement this with minimual additional openings to the box. What started as something only for my dry box, turned into a way to use old C13 style power connectors for…
The attached model was created to mount 10" Haul Master pneumatic tires to the legs of a pizza oven table and a gardening table using ¾" EMT conduit with Maker Pipe threaded inserts. The plate is designed to use 3/8"-16 bolts both through…
I wanted to use my Raspberry PI version 3B with a camera to monitor printing progress. I found a project here https://www.thingiverse.com/thing:3079477 that met my needs. However, it was designed for a different printer and mounting to…
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
Uses an Ikea bell cloche (Morgontidig), to stack on a Gradvis plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued.…
Mein neuer Computer hat das Gehäuse (Case) Wildrabbit Aero. Die Anschlüsse (USB, Audio, ...) befinden sich auf der Oberseite, wodurch sich mit der Zeit Staub in den Anschlüssen ansammelt. Diese Abdeckung wird in den USB-Port gesteckt und…
This part was designed to fit on the Rittal 3243200 outlet filter housing. Its purpose is to repair instead of purchasing a complete new filter housing. 2 perimeters, 40% infill It fits snug on the remaining ”lip”, this version needs to…
Housing for an E-Switch RA1 panel mount toggle. Pictured with the RA17131123 but should work with any of them. It should be easy to adjust the mount hole dimensions for other switches in the source files. Provides strain relief, access to…
Supply air fan housing for the cooling and electronics in the housing for MK3.9 whit Cartridge housing
Print in asa or abs for heat resistance. Non brim (included with the stl file), with support
The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…
Tool for working with Pylontech LV batteries (external charging and discharging - 2mm test probe diameter) and other batteries using the SurLok QLB connector…
Having bought a workbench to place my printers it needed stabilizing. With this assembly the designated legs can be attached to the wall making it very sturdy. For my specific case a workbench leg has the following dimensions: 60.5 x 40.5…
TLDR: This post is quite long and detailed because it involves the findings from hundreds of experiments. If you're just looking to try the best settings, download TestSuite_OrcaSlicerOnly_V6.3MF , make sure to set your own filament…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
The DUMB Wallet – D esigned U sing M inimal B ullshit It’s stupid simple. Like, really stupid... No sliders, no screws, no elastics, no levers and shit—just exactly what it needs to be. It holds your cards. It holds them really well. But…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
Overview Based on KAMP by kyleisah: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging Part of KAMP is to adapt various printer functions to suit each individual print, rather than a global constant. For example only ABL probing…
There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
Update V2 +V3! You can get the new version with alot of improvements on Cults. https://cults3d.com/en/3d-model/various/creality-ender-3-v2-fan-cover-duct cheers! THE FREE MODEL YOU CAN DOWNLOAD HERE MIGHT NOT FIT SINCE IT WAS A FIRST TEST…
Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…
Baby Grogu Using the Force. Design by https://skfb.ly/onVoy. Fixed for 3d printing.
This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
This housing is designed to hold the Time of Flight and LED (ToFnLED) board for Gaggiuino over the water tank using magnets. The board slides in from the end, clipping in with the flex arm clip. If the board needs to be removed it can be…
Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…
OpenFormicaria A Open Source modular ant formicarium and home with simple space saving connectors. Updates/Changelog 2020.11.02 Added 6xGateway More space or broader attachement to other modules! 2020.11.01 Small fixes Added Connector…
I got tired of waiting for a warranty replacement extruder housing for the Creality Ender 3 V3 KE after it melted after a big blob of death on my friend's printer. So I reproduced the design on my own (in SolidWorks). I changed a few…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
There are 2 gaps at the bottom of the printer housing (see picture). Filament particles may fall into these gaps and cannot easily be removed. This cover remedies the situation.
Newer model here - gantry mounted version including nozzle stop to prevent leakage when parked: https://www.printables.com/model/882364-new-version-adjustable-gantry-mounted-nozzle-seal This is a remix of the great design by FunFunBoy…
Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or…
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Creality K1 - Hepa filter housing This design has been created to place a hepa filter on our Creality K1 printer using Xiaomi washable hepa filters Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un…
A 6 degrees of freedom mouse for CAD programs using cheap linear hall effect sensors for position measurement. August 21 2025 For information: I am currently using the TPU spring version in the smaller case. See:…
A compact housing that will fit the Shelly Mini Gen 3 series. Two options for the base, one with 6mm holes and another with 8mm holes for thicker power cables. The lid works for either base. Allow you to mount the unit and two WAGO…
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
A set of covers for a straight-through XT60 connection (mainly so I can avoid shrink tubing). Has 2 separate 4mm diameter wire holes. The fit is a bit loose but suits my requirements. I printed on a raft - without one, you may need to cut…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
Stronger Snap Latch with M3 Screw Because any voron builder has tons of spare M3 screws! This repo is based in the amazing works from: Original Snap Latch:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
🔄 Update – Version 2.1 (Mesh Fix & Improved Wall Generation) This update focuses on print reliability and structural stability, especially in narrow sections of the base plate. ✅ What’s new in V2.1: STL mesh fixed by jetmech43 Many thanks…
I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build. It is comprised of two components, the base plate and the top cover to house the SB50 plug. The components feature a small…
They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.
Within this box fits a Shelly Plus (1, 1PM, 2PM) and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. (For Shelly Plus…
This is an old model I made and used for several pieces of furniture. It screws to the bottom of the leg or furniture to hold an M8 nut. An alternative design is to drill into wood to fit and hold the nut:…
Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…
Somehow my factory tension housing cracked and I wanted to just print a replacement vs buy something GalvanicGlaze on Thingiverse posted a basic external shell which I modified to have the appropriate internal components for the…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
