Search results: vane

Sort order

170 models

Spongebob Cup for being advaned stupid

Spongebob Cup for being advaned stupid To Annoy your friends/students s.o. You can give it as a cup for being stupid. Remix of " https://www.thingiverse.com/make:564965 " Print instructions Scale the Model as you like, Split the Model for…

Print approx. €15.58–€19.04 excl. taxPreliminary estimate for one variant

Downloads
229
Likes
24
Rating
4
P
PrintablesArtursK

Car Vaccum Pump Vane

Repair part for car vaccum pump OEM 8E0927317. Print Settings Brim: No Supports: No Infill: 20 Filament: Any PETG Layer Height: 0.15mm

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
1
Rating
0
P

Jeti DS 24 II transmitter windvaan / windfahne / windvane

The holder slides onto the handle of the DS 24 II. I used a 2.5mm carbon rod as the mast. For the vane, I used tape material from a cassette tape

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0

Knob for Vanette Ceramic Oven

Knob compatible with 220Volt 3200 Watt Vanette Ceramic Oven. Remix from knob with Compatible D slot in the back, added a ring with correct number positions as well as the slot for a M3x20 screw to secure it to the post. Unknown if it will…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
PrintablesHarry

Weather Station One Part 5 - the Wind Vane and Anemometer

Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…

Downloads
1,780
Likes
266
Rating
4.67
P
Printablesbazzzzzzz

Wind vane Pumpkin Cat

Updated after a sugestion from Ghe.leguen made a single shafted version avalible so the bottom spinning wheel will not interfere with the vane. I now have a few build options: A single part vane you will need a buildplate of atleast…

Downloads
754
Likes
461
Rating
5
P
Printablesmobiobi

Helicoptery Weather Vane

Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…

Downloads
556
Likes
256
Rating
3.67
P
Printablesictapa

Fletching jig for spiral vanes archery

Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…

Downloads
550
Likes
58
Rating
5
P
PrintablesKevin

WeatherFlow WEATHERmeter Wind Vane

Wind vane attachment for WeatherFlow's WEATHERmeter . A single 608 bearing (22mm x 8mm x 7mm) required for assembly. Base has standard ¼-20 threading for tripod mount. There are two base models, one where the top peg (that goes into the…

Downloads
516
Likes
15
Rating
0
P
PrintablesHD_Creator

Precise wind vane (balanced)

Use case Shows the wind direction precisely, even if mounting pole is not perfectly upright. To achieve this, the vane and the counter weight are carefully balanced. Printing Print all parts in the uploaded orientation. To achieve a very…

Downloads
475
Likes
54
Rating
5
P
PrintablesAdam

Anemometer with wind vane - Parametric

All the hardware i will be using is necessary for the stock version. Though you can modify the parameters to fit your screws and bearings. I opted to use bearings since it makes the whole assembly pretty much silent. It is also very…

Downloads
464
Likes
130
Rating
4.67
P
Printablesamzoo

Arrow Fletching Jig (True Helical, 3 Vane)

Fletching Jig for 3 vane arrows. I need a true helical jig and wanted it to be small enough to pack away. Uploading full Fusion 360 file for you to play with parameters (in images). I have added files for 4" vanes, 0.2875" shaft, 4 deg…

Downloads
452
Likes
60
Rating
2

masthead fly, burgee, wind vane, Verklicker for small sailing boats

UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…

Downloads
398
Likes
69
Rating
5
P
PrintablesRypydus

Weather Vane

Korouhvička s ložisky. Body-B tisknout full z důvodu přibližného vyvážené s Blade. Blade tisknout 0.2 mm vrstvy, 4 spodní a 4 vrchní a mezi nimi výplň 40%. Blade a Body-B lepit. Stejně tak Body-A a lopatky. Použit šroub M8x100 (zkrácen na…

Downloads
389
Likes
82
Rating
5
P
PrintablesWilliamLund

WH AOS Sylvaneth Overgrown Token

Hey we've got to have tokens now. You can use this! Should work however way you want to print it.

Downloads
304
Likes
4
Rating
0
P
PrintablesUniDuni3d

CATAVENTO - WIND VANE! 1 HOUR PROJECT!

What about a 1 hour project? Print the wind vane!!! Watch build video ( and subscribe to support me ): https://youtu.be/wLRc11sCMeE Materials needed: 1 cutter plier (for 45 degree cut) 3,5-5cm of filament (for the axle) lighter (just a…

Downloads
283
Likes
67
Rating
4.67
P
Printables3dcad

Sun ray pattern (multi blade horizontal propeller), self orientating wind vane

Garden wind vane featuring 12 blade (sun ray pattern), horizontally mounted propeller with blade circumference ring and tail fin to enable self orientation to the wind. Modular design to enable easy sub part replacement and build…

Downloads
250
Likes
24
Rating
0
P
PrintablesGeorgi

Rooster Vane v1

This is a Rooster Vane from few parts. You could use some Loctite glue, especially for gluing the rooster and the rooster holder. One of the variant I made is with holes - you could use some filament with glue. The base I made in two…

Downloads
249
Likes
30
Rating
0
P
PrintablesBodenM

Bosch Flapper/Vane MAF (VAF) intake adapter

A simple adapter to allow you to mount a 76mm/3" intake/filter onto a Bosch flapper/vane-type airflow sensor with an ~82x37mm bolt pattern, as found in many late 80s to 90s cars such as BMW E30/E36, VW Golf Mk2/Mk3, Mazda MX5/Miata…

Downloads
208
Likes
13
Rating
0
P
PrintablesFriedhelm B.

Befiederungsgerät für 3 Vanes / Fletching Jig for 3 vanes

Für Schäfte von 4,5 bis 8mm Außendurchmesser Man benötigt die base, eine cap mit dem Außendurchmesser des Schafts (nächste Größe) und drei Inserts mit dem gewünschten Winkel (0°, 1°, 1,5° oder 2°) Der Bajonettverschluss funktioniert am…

Downloads
206
Likes
23
Rating
5
P
Printablespachek

Weather Vane

Needed: 1 X 6700RS bearing [10 x 15 x 4 mm] 2 X M3 countersunk bolts with nuts

Downloads
203
Likes
36
Rating
5
P
Printablesexcitron

Weather vane for AS5600

Weather vane to determine wind direction. To fit AS5600 magnetic rotation sensor and 608Z bearing. Hub is made up of four parts: -Cap to hold bearing -Body to house AS5600 sensor -Base to attach to substrate with hole for cable -Cover to…

Downloads
189
Likes
6
Rating
0
P
PrintablesRypydus

Weather Vane 2

Weather vane 2. Printed form PETG. Need 2x screw M8x100, 3x lock nut M8 and 4x bearings 608ZZ (ABEC for in line - bought in sport shop). All parts printed full infil (better for point of gravity) with 3 perimeters and 0,2 mm layers. Part…

Downloads
188
Likes
68
Rating
5
P
PrintablesBrandon Booth

Kestrel Weather Vane

Used to mount a Kestrel 5700 to a tripod for continuous wind adjustments. Kestrel slots into hold and hold securely, also has a hole on the bottom to route a string where the attachment point is on the Kestrel. Uses a 608 2RS bearing.

Downloads
184
Likes
9
Rating
0
P
PrintablesPlantagoLabs

Dragon Weather Vane with Windmill

Add some epic ro your garden with this weather vane in the shape of a medieval dragon holding a flower. The flower is also a functional windmill. This weather vane is meant to be installed on a wooden pole. The model in the picture was…

Downloads
181
Likes
45
Rating
5
P
PrintablesAuamarto

Kestrel 5700 weathervane

This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials. Changes: Hole is designer for 6mm x 6mm stick (highly available in my area)…

Downloads
175
Likes
11
Rating
0
P
Printables3DFiguresGalore

Havanese Dog Figurine

This Havanese figurine features accurate small-dog proportions and simplified coat detail. Designed for single-color, one-piece FDM printing without supports. Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )

Downloads
174
Likes
18
Rating
0
P
PrintablesSeventhSeeker

Weather vane with classic Rooster and animal direction markers

Please let me know if you have any trouble with this! This was a first attempt there are definitely things to improve, so remixes welcome! I have not had a chance to test in different wind conditions, so YMMV! Printing: Consider adding…

Downloads
166
Likes
15
Rating
0
P
PrintablesPaillot1964

Bouchon protection pour prise remorque/caravane

Impression en PETG recommandé, remplissage 20%, pas de support

Downloads
158
Likes
12
Rating
5
P
PrintablesDave MacLeod

Weathervane Windmill

A weather vane with an integrated decorative toroidal windmill. Needs a couple of 608 bearings. Designed to strap to a fence post with a couple of tie wraps. I printed all four pieces with supports using PLA+ and it has been happily…

Downloads
157
Likes
20
Rating
0
P
PrintablesHT Hammer

Disney Infinity Vanellope Von Schweetz

Disney Infinity Vanellope Von Schweetz

Downloads
156
Likes
23
Rating
0
P
PrintablesTimid Possum

Fully Printable Modular Windmill / Windvane / Whirligig Birds Woodpecker

Video of it in action: https://i.imgur.com/TIBUhLD.mp4 UPDATE: I have added a PDF with assembly instructions. This is my attempt at a whirligig / windvane / windmill thingamajig which is modular, meaning that you can swap bits in and out…

Downloads
155
Likes
36
Rating
0
P
PrintablesTonyD_GRB

Arrow Fletching Jig - 3, 4 &5 Vanes

Simple Arrow Fletching Jig for putting on 3, 4, or 5 plastic arrow vanes on a modern carbon arrow. This is straight on alignment, and does not apply a left or right helical. See different models for correct arrow size, should fit Standard…

Downloads
144
Likes
10
Rating
5

Wind vane propeller

The original propeller of my wind vane broke. I designed this one as a replacement. It uses a 608 bearing so it can be attached by a m8 screw. Print instructions The print should be paused at 13.4mm to embed a 608 bearing. It needs a…

Downloads
138
Likes
21
Rating
0
P
Printablestato_713

Gravity Falls vanes

Originally published here: Gravity Falls vanes by tato_713 - Thingiverse . For the more detailed models clic here. This is, as accurate as I can do it, the vane that appears in the Gravity Falls intro, and through the whole series as…

Downloads
136
Likes
89
Rating
4
P
PrintablesDanB

WeatherFlow Meter Weather Vane

This is a weather vane for a WeatherFlow Precision Shooting Weathermeter. This mounts to a ¼-20 tripod mount. I also included a pdf file for the spindle if you wish to make from AL or other material. Note: I did not model the ¼-20 threads…

Downloads
136
Likes
7
Rating
0
P
PrintablesSaufziege

Ersatz-Feder / Vane (2-fach) für Armbrustbolzen (6.5 Zoll)

Wenn an einem Armbrustbolzen eine Feder (Vane) beschädigt wird, ist oft der ganze Bolzen unbrauchbar. Diese 3D-gedruckte Feder ist als schneller, einfacher und kostengünstiger Ersatz für kaputte Original-Federn gedacht. Ich habe sie…

Downloads
134
Likes
11
Rating
0
P
PrintablesSerge Nader

Wind Vane

All parts print easily without supports, except the main rod. Once you remove the supports, make sure that the cylindrical part is smooth. To assemble this wind vane, simply stack the parts on top of each other. Double check the…

Downloads
131
Likes
22
Rating
5
P
PrintablesEng. Yehia

youre my hero (vanellope's medal)

this part was inspired from the movie Wreck it Ralph, it was a nice gift designed for a friend. it's easy to print but it's a bit hard to paint. Category: 3D Printing

Downloads
130
Likes
10
Rating
5
P
PrintablesGarder3D

Adorno bola de Navidad - Vanessa

Adorno de bola de Navidad con el nombre de Vanessa (doble S). También disponible en: Thingiverse: https://www.thingiverse.com/thing:6383871 Cults: https://cults3d.com/:1650608 Ejemplo impreso en PLA efecto plata.

Downloads
130
Likes
6
Rating
0
P
PrintablesWT29

Weather Station. Raingauge, Anemometer and Windvane

Print files and Fusion 360 project to make a weather station. It will need an ESP8266 pro to log stuff. The pro is required as it has an external antenna. It all clamps to a 25mm aluminium pole. The raingauge is a tipping bucket type - it…

Downloads
129
Likes
14
Rating
0
P
PrintablesDaniel Zlock

Arrow Nock and Vanes

This is a combined arrow nock and plastic vanes set that can fit on the end of a shaft. This is a nearly exact replacement piece I made to put on the end of an arrow for an old beginner archery set I have, so I am unsure if it works with…

Downloads
127
Likes
19
Rating
5
P
PrintablesMaking Magic

weather vane extruder visualizer

This is a fun little print that simply slots onto your extruder gear…knob…axle… thing. It helps you visualize when the printer is extruding, how much it's extruding (judging by length of spin) and is just a fun little accessory for any…

Downloads
126
Likes
24
Rating
5

Whistling arrow vane

This is a whistling vane for an arrow. It is designed to fit an ACE (5mm diameter) but should work with other sizes to be honest. They make a pretty good whistling sound when fired over a decent distance (otherwise the bow noise is…

Downloads
123
Likes
25
Rating
2
P
PrintablesPaul 3D_4_Fun

Wind Vane - Toroidal Propeller

This wind vane responds quickly to changing wind conditions. It uses ball bearings with acetal shells and stainless steel balls, and needs no lubrication. I have used PLA and it has survived for several years and is still going strong.…

Downloads
118
Likes
19
Rating
0
P
PrintablesSerkan ALÇAY

DIY Propeller / Pervane

Model uçaklar için mini pervane. Çift taraflı 0.2cm kamalı.

Downloads
116
Likes
9
Rating
0
P
Printablespachek

weather station = anemometer + wing vane

Hardware you need: 22 M5 X 20 mm bolts 2 Skate roller bearing (608 size) 2 bars 15 mm diameter. Minimum length 300 mm. Support is designed for a 35 mm diameter pole. Anemometer cups: glued to the rotor arms. Better to be printed upside…

Downloads
112
Likes
22
Rating
5
P
PrintablesAdrian Beck

Wind Direction indicator Vane (Windex, Sailing, Verklicker, Windanzeiger)

Turn the Vane 5° for standard sized print bed. Use UV-Stable Material with good abrasive characteristics (e.g. PETG) If you want to use this on a boat Mast, consider that the colour you choose should be seen. Glue together the Base and…

Downloads
111
Likes
17
Rating
5
P
PrintablesBravehartk2

Dragon weathervane remix

I combine the following two models and build a axe model to mount the dragon weathervane on the top of a bird house. Source: https://www.thingiverse.com/thing:928309 https://www.thingiverse.com/thing:2561125 (Dragon) Print instructions…

Downloads
101
Likes
16
Rating
0
P
PrintablesLazarus65

Evanescence/Linkin Park logo

Just a simple model for a necklace charm of my 2 favorite bands. Logo designed and created by me. Still a work in progress. May need to be resized depending on newds.

Downloads
101
Likes
10
Rating
0
P
PrintablesErick Mav

girouette simple / Easy wind vane

Voici une girouette que j'ai conçue pour mon voilier de 6m mais elle peut fonctionner pour n'importe quel bateau. l'ensemble est monté sur un axe de diamètre 6mm et tiens avec une goupille fendue. Je l'ai imprimée en PLA sur la diagonale…

Downloads
96
Likes
1
Rating
0
P
Printablesroyicus

Voron Exhaust 60mm fan to 2.5" Hose Adapter with Vanes

Print with whatever material. No supports needed.

Downloads
96
Likes
14
Rating
5
P
PrintablesCobra109

Splash windvane universal

Windvane for splash sailboat. Universal windvane fitting. Print with support, i used organic wich works best. (print upright) 0.16mm layerheight 215 °C first layer 210 °C rest layers 60°C bed temp 0.4mm nozzle 20% infill (preferably…

Downloads
94
Likes
10
Rating
5
P
Printables1xMerch

Indonesian Mask Wall Art – Balinese & Javanese Traditional Mask – Hand-Carved Style Cultural Home Decor

This 3D model was generated with the help of AI but was fully edited and rendered by me in Cinema 4D. A stunning 3D printable model of a traditional Indonesian mask, inspired by the sacred art of Balinese and Javanese cultural heritage.…

Downloads
92
Likes
24
Rating
0
P
PrintablesFellipeC

Mini lighthouse cock weather vane replacement

Upgrade your school’s mini Farol do Saber with this sturdy and charming Cock Weather Vane Replacement . Designed to replace fragile wooden vanes, this 3D-printable model adds a touch of whimsy and functionality to educational spaces.…

Downloads
85
Likes
3
Rating
0

Weather Vane

1 X bearing 10 x 15 x 4 mm 4 X M3*40 countersunk bolts with nuts

Downloads
83
Likes
9
Rating
0
P
PrintablesMaxiprint

Weather vane with 608 bearing (Remix)

Sunday afternoon project. Remix of @pachek's weather vane. So that it uses the popular 608 bearing (used in skateboards, printing parts, etc). Thank you @pachek for including the STEP file (I wish more people will do it). As I stay in an…

Downloads
81
Likes
18
Rating
0

pervane

pervane

Downloads
78
Likes
2
Rating
0
P
PrintablesMatyáš Flek

aplha dragon by nevaneva

very cool print to mount on any kind of stuff, to connect the parts, i just soldered it together and it works, once again, nevaneva is the creator, not me, all parts except wings and tail can be printed without supports, happy printing

Downloads
77
Likes
31
Rating
0
P
PrintablesModel Magic

Black Sails - Captain Charles Vane - 2014-2017

Black Sails - Captain Charles Vane - 2014-2017 3D printable model.

Downloads
76
Likes
11
Rating
0
P
PrintablesCareFudundae

40mm to 30mm fan adapter with vanes

combined a 40mm to 30mm adapter with an included vane

Downloads
75
Likes
6
Rating
0
P
PrintablesBooks

Vanellope Von Schweetz

Public domain model of Vanellope Von Schweetz from Disney's Wreck-It Ralph by procyonlotor . Originally uploaded to Blend Swap .

Downloads
74
Likes
5
Rating
0
P
Printablesmechanical0815

Secondary Mirror Spider for Skywatcher Newton 200 mm (8"), 3 spider vanes, 3D-Printed

Design The tube end ring is combined with the secondary mirror spider. The mirror holder is centered by design, it is not possible to adjust the center position of the mirror holder and therefore the mirror. The standard secondary mirror…

Downloads
72
Likes
6
Rating
0
P
Printablesadamnant

Syndra Sylvane, Archmage (DND / TTRPG)

An NPC from Tomb of Annihilation. This is a relatively simple model for an NPC that draws in the party to the adventure. I didn't find a lot of good examples for Archmages or older/retired adventurers like Syndra so I made this one. Could…

Downloads
70
Likes
17
Rating
0
P
PrintablesJS_SunnyFlorida

Van's Aircraft RV-12 Stall Vane Safety Cap

Stall Vane safety cap to prevent the sharp metal of the stall vane actuator from injuring a person. A "Remove Before Flight" can be added to provide additional visibility when installed. Designed specifically for Van's Aircraft RV-12.…

Downloads
68
Likes
14
Rating
0
P
PrintablesMarco Chiarello

Biplane weathervane

Bring a touch of classic aviation to your garden or rooftop with this dynamic biplane weather vane. Fully 3D printed, as shown in the image sequence, this model is designed to rotate smoothly to indicate the direction of the wind. The…

Downloads
67
Likes
35
Rating
0
P
Printablesmechanical0815

Secondary Mirror Spider for Skywatcher Newton 150 mm (6"), 3 spider vanes, 3D-Printed

Design The tube end ring is combined with the secondary mirror spider. In my opinion, it makes no sense to screw on the tube end ring and also the spider for a 3D-printed part. The mirror holder is centered by design, it is not possible…

Downloads
66
Likes
4
Rating
0
P
Printablesteodulo soriano

Detachable windvane

Detachable windvane to make printing fast and less waste materials from supports

Downloads
65
Likes
11
Rating
5
P
PrintablesChave Treze

Nissan Vanette rearview mirror piece

Just add an M5 nut on the back. Don't print in PLA, it will melt inside the car on hot days, try ABS. EDIT - I added another file with slightly different measurements that works better. You may have to fine tune the fit with a file/dremel…

Downloads
62
Likes
2
Rating
0
P
PrintablesSAILONE

Wind Vane for AS5600

Magnetic Wind Vane for Arduino / AS5600 A simple and reliable wind vane designed around the AS5600 magnetic angle sensor. No potentiometers, no contact wear — just a magnet and a sensor giving you clean 0-360° wind direction readings over…

Downloads
60
Likes
3
Rating
0
P
Printablessir miss_alot

wind - weather vane

print as they are 5.1mm holes for 5mm rod move pivot along the rod to it is balanced. longer this rod bar is the easier it turns in low winds start with elbow to finger tip 500mm i added a single 4mm ball-bearing on top of rod u put in…

Downloads
59
Likes
7
Rating
0
P
PrintablesGuilhem

Porte-clef plaque d'immatriculation "CARAVANE"

Porte-clef plaque d'immatriculation "CARAVANE" à imprimer avec deux changements de couleurs à ⅓ et à ⅔ de la hauteur. Blanc puis bleu puis noir. Modèle original inspiré par https://www.printables.com/model/221060-numberplate-keyring

Downloads
58
Likes
8
Rating
0
P
PrintablesNathan Caldwell

Rotary Vane Engine(Prototype)

This is a concept of a Rotary Vane Engine I've seen on YouTube before. I think this engine has a lot of potential in the future, as seen in Driving4Answers video. This has NOT been printed or tested in real life, only modeled. If you…

Downloads
57
Likes
4
Rating
0
P
PrintablesThaatGuy

Spin Wing Jig Blank Vane Holder

Blank model of Ludodg's vane holder for making new holders for various vane shapes. Includes .Step .F3d and STL to import into your modeling software of choice. Changelog V5 SpinWingHolderV5.f3d has added parameters for the clip overall…

Downloads
56
Likes
2
Rating
0
P
PrintablesRaptor_50_Titan

Hayword The Pool Cleaner Turbine, 6-Vane Kit - PVXH038SA Vane ONLY

This is a replacement Vane for the turbine drive for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Turbine, 6-Vane Kit - PVXH038SA This is #2 on this diagram (Vane ONLY)…

Downloads
56
Likes
6
Rating
0
P
Printablestruglodite

E3D Duct - 40mm w/ Stator Vanes

I designed this duct to fit a 40mm fan on the e3d hotend heatsink (fits V5 and V6, bowden or non). I had used a similar design for several years, but it had some quirks that were annoying to deal with. I also learned some interesting…

Downloads
54
Likes
7
Rating
0
P
PrintablesHatsuseno Rin

YKK Fish Vane 風見魚 1

Cafe Alpha's original fish vane 風見魚 in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou) It's a simplified desktop version that does not spin in the wind (sorry). The pattern is based on the Hitoshi Ashino Art Book instead of the manga…

Downloads
53
Likes
7
Rating
0
P
Printablesmactiti

support jauge gaz pour camping-car ou caravane

support jauge gaz pour camping-car ou caravane Category: R/C Vehicles

Downloads
52
Likes
7
Rating
0
P
PrintablesmicroArc

Hadley Variant Spider Vanes (Heatset Metric M4)

This is the beginning of a growing list of different spider vanes for the hadley telescope. I plan to add many more variants going forward. Spider vanes hold the secondary mirror in place in the center of the UTA assembly. The shape,…

Downloads
52
Likes
1
Rating
0
P
PrintablesFejfar Jakub

Weather vane

The individual parts are glued. Do not glue the stand with the rod.

Downloads
51
Likes
17
Rating
0
P
Printableskiki-print

rooster weathervane

Remixe en une pièce du coq 3417624 --- Si vous voulez me soutenir pour mon travail ou juste si vous êtes sympa, vous êtes libres de faire un don sur ko-fi If you want to support my work or just if you are nice, you are free to make a…

Downloads
49
Likes
1
Rating
0
P
PrintablesGrafit

Vane - Pirate gang leader

This guy appeared first in Mandalorian SE03EP01. I sculpted him on my iPad Air 4 (2020) using Nomadsculpt. First it was planned to be a bust, without hands. But in the end he got some personality with the hands and the pose. Hope you like…

Downloads
49
Likes
14
Rating
0
P
PrintablesCrackFox

Red bull RB14 turning vane

Turning vane for RB14 similar to 2018 Spanish GP. Pictures are after some rough post processing. You must take the barge board off prior to removing the turning vanes to have the right layering on the aero bits. if you hate this you can…

Downloads
47
Likes
9
Rating
0
P
PrintablesTurbo9670
18+

The source marked this model as adult content.

Downloads
43
Likes
25
Rating
0
P
PrintablesDr_made

weather vane

A weather vane for the street on a bearing of the brand 608, measuring 22x8 x7. The model is a national team. It can be assembled on glue. It is placed on a bolt or stud of 8 mm. The model has been printed and has been in operation for 2…

Downloads
43
Likes
4
Rating
0
P
Printablesmoebio

Vane

Small vane for house model. I designed it for this house: https://www.printables.com/model/200529-victorian-country-house It's very small, so I designed it to not require any support, and to be easy to assemble.

Downloads
38
Likes
11
Rating
0
P
PrintablesJürgen_B

Archimedes Wind Turbine (New Vanes)

I made some vanes for archimedes wind turbine . Only as 3mf- and stl-Files. The 3mf-Files are made for PrusaMK4. Update: 2024.08.14 Yin Yang Cat Update: 2024.08.18 Sterntaler V02 Have Fun

Downloads
36
Likes
10
Rating
0
P
PrintablesDed Makar

Javanese cat silhouette

Javanese cat silhouette

Downloads
34
Likes
2
Rating
0
P
Printablesbmccarthy321

Snoopy Wind Vane Hanger

This isn't really a remix, it's a bracket to hang the snoopy wind vane from Chipen83 on thingiverse: https://www.thingiverse.com/thing:5189130 The website wouldn't let me note it as a remix for whatever reason, so it's not shown that way.…

Downloads
34
Likes
10
Rating
0
P
PrintablesTorrin Smith

Two-Handed Javanese Kris

Technically speaking, this was modeled after a traditional one-handed Javanese Kris sword. But to my knowledge, a double handed version never existed in real life and the weapon was a symbol of societal status. I liked the curves, and one…

Downloads
33
Likes
3
Rating
0
P
PrintablesPhiloz

Rapido Caravane / Bettstangenhalter

Bettstangenhalter für Rapido Export / Record / Confort. Masse gemäß Originalteil.

Downloads
32
Likes
3
Rating
0
P
Printablesghe.leguen

Wind vane

🇫🇷 🥐 Ce modèle est une proposition de remix du projet proposé par @bzzzzzz sur printables.com : https://www.printables.com/model/976722-wind-vane-pumpkin-cat J'ai fabriqué la V1 de ce modèle et j'ai rencontré plusieurs problèmes : La…

Downloads
31
Likes
6
Rating
0
P
PrintablesBinduBunny

3mm windvane

Remix of a windvane made by Maschinist RaumZeitPiraten modified for a 3mm rod.

Downloads
31
Likes
1
Rating
0
P
PrintablesBuildX

#0142 [REMIX] Vent Flap with Vanes

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This vent flap includes vanes that direct heated air…

Downloads
31
Likes
4
Rating
0

Weather vane for a cat's house

This is a weather vane for a colleague. It is printed from PET-G, painted, assembled together and installed on a cat house. Additionally, two bearings and a shaft were used Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100…

Downloads
31
Likes
2
Rating
0
P
Printablesjeremy sellers

Taskmaster silhouette Weather Vane Wall decor

A simple wall hanger based on the weathervane from the Taskmaster house. I used double stick tape to hang it on my wall. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model **Rafts:** Yes Supports: No **Infill:** 20%…

Downloads
29
Likes
5
Rating
0
P
Printablescfresh

Weather Vane

Weather Vane to mount on a post or horizontal surface. To maintain a good balance I used 2x bearings (608ZZ ID 8mm OD 22mm H 7mm) with a spacer in the middle and then locked into place with spacer. You can use 3x bearings if you wish as…

Downloads
28
Likes
10
Rating
0
P
PrintablesHatsuseno Rin

YKK Fish Vane 風見魚 2

Cafe Alpha's second fish vane 風見魚 in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou) It's a simplified desktop version that does not spin in the wind (sorry).

Downloads
28
Likes
3
Rating
0

Wind Vane using IR Diodes

Someone requested the CAD files from my video … So that's why this page exists (: The video in question: I have put no work into making this understandable or easy to print or whatever. It's just the files straight of my computer. Do…

Downloads
26
Likes
2
Rating
0
P
Printablesgjpc

Vantage Vue Wind Vane Repair

My vantage vue wind vane suffered damage when I took the unit down for maintenance. I looked at the Davis site for a replacement and was reluctant to spend $25.00 with shipping. I found morrowm's Wind vane with a Freecad file attached and…

Downloads
26
Likes
4
Rating
0