Chevrolet Corvette C8 Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 312
- Likes
- 54
- Rating
- 5
1,946 models
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
The logo is the one used by Corvette C6, that was made between 2005 and 2013. This is a print using four colors, so if you dont have the MMU you will have eight manual changes. Only the first two layers include multicolor, so after that…
Corvette Logo & Writing keychain
A detailed Star Wars inspired bookmark, designed to be super thin with some topographical detail. No page damage, no hassle, just a cool design. The Corellian Corvette (CR90) was a ship commonly used by the Alliance to Restore the…
This screwdriver holder in size 1–6 features a hidden dovetail wall mount , providing a strong, precise, and visually clean attachment to your tool wall or workshop setup. Designed for reliable and easy 3D printing in PLA , but it can be…
This is a print using two colors, and if you dont have the MMU you will have manual color changes. Only the first two layers include multicolor, so after that it runs without supervision. Print starts with a color change to the contrast…
This is a remix of this design, but for MINI printer. It is exactly the same model, but I removed one cork perimeter allowing this great design to be printed on the MINI! I attached the f3d model for anyone interested! 10/04/2022 Uploaded…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert I wanted some knobs that matched the blue CF arm. https://www.bulletpointmountingsolutions.com/ Here is my fix. I used 3D Fuel PRO-PCTG (Cobalt Blue)…
Cuvette Holder Stand - Eppendorf tube fully modular. In a biology laboratory it is often necessary to work with instruments such as spectrophotometers and spectrofluorimeters. In general there are many types of cuvettes and/or containers…
PLA or PTEG, 30mm speed, only 2 perimeter and infill anyone 15% or 25% with Lightning.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Aurapol Black PLA Aurapol White PLA Aurapol Red Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #14 (1.2mm)…
This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
The wife asked me to make a napkin holder. I found a neat design online so I recreated it… a bee with a little heart in the path. I remade it in fusion, and determined it was actually not a very easy task. I made a spline and wrapped it…
Created a simple brush holder so it couldn't fall out or drip outside the bucket.
Spojovací šroub, parametrický, M6 závit Doporučuji tisknout menší tryskou, 0,4mm sice jde, ale pak se těžce šroubuje. FreeCAD parametrized: Tip: Změna závitu možná změnou typu šroubu v ScaledScrew a škála mění vůli mezi díly šroubu, Tip:…
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel. Für ein Photometer zur Wasseranalyse in der Bädertechnik. Die Stellfläche für die Küvetten und Deckel ist durch das Gitter und auch im unteren Bereich von vorne und hinten…
Držiak akvarijného osvetlenia pre svietidlo AQUA NOVA NSLxx
I added a cutout on the back for a 10mm x 2mm circular magnet.
Jednoduchá podložka pro veteránské SPZ/CZ ideální tisk PETG/ASA. Bez otvoru pro uchycení, každý si pak vloží či odvrtá podle potřeby. SPZ ideálně vlepit do rámečku pomoc oboustranné lepící pásky
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Needed some push-rivets after losing some reassembling an Original Enclosure - sharing here in case you need some also. Simple functional push-rivets used in securing thin panels for the CORE One, the Original Enclosure and I assume,…
Pause mid-print for color change and magnet insertion. 4mm diameter, 2mm height magnets. Magnets and colors are optional - tool works just by printing as is. Recommended settings: 0.2mm nozzle 4-5 walls high infill Use the smallest layer…
This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed. The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR. Compared to other…
Replacement part for Infiniti "push pin clips." Because I was unfamiliar with these clips and did not know how to remove them , I tore up several when removing the under-hood cowl when replacing my battery. So another chance to sketch…
The Ship The Corellian CR90 Corvette, also known as the Rebel Blockade Runner, is a 150m long ship, used as a freighter, consular vessel and warship alike. Probably the most famous ship of this class is Tantive IV, the first ship to…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
Plastic Rivets created for Mazda M6. Diameter 17.8 / 6 mm, depth 17.4 mm
This model is based on Zack Freedman's Gridfinity and Kyle Warren's screw together adaption. My version uses a dovetail connection to connect individual modules into any configuration. A step file is included for modification and…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I designed this for my specific toolbox drawer (US General 44" top chest), and the specific pliers I own. It probably won't be perfect for you unless you happen to own exactly the same stuff. But I am sharing it anyways, because some…
Summary This is a model of a Chevrolet Corvette Z06 (C6) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of integrated…
Update: Please don’t print this in PETG . It’s too flexible , which makes the “legs” spread apart, and it’s also too soft , so the first layer/edge gets damaged quickly with repeated use. If you choose not to follow these recommendations,…
This model is based on Zack Freedman's Gridfinity and Kyle Warren's screw together adaption. My version uses a dovetail connection to connect individual modules into any configuration. The connection is tight and requires a tool to gently…
Push-In Rivets with Ribbed Shank. Commonly found in automotive interiors. Step file included Print in ABS, ASA, Nylon, 0.1 layer height recommended. [Updated 03122025] Repaired some mismatched structure, added V2 & V3 Added V2 with center…
At first, this piggy bank appears impossible to open, with a dovetail joint on all four sides. In reality, this is a simple box with two parallel dovetails, spanning the same direction as the coin slot. Print Instructions: Print both…
This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…
Further details about project can be found here . Project 376 "Yaroslavets" (Ярославец) is a Soviet and Russian riverboat. It was designed in 1953 and since then was manufactured in huge quantities. A lot of these ships are still used by…
This is a rivet designed to hold the plastic underbelly of a car up to the chassis, much like the black store-bought version (shown in the cover photo). It was designed with the 2003-2008 Toyota Corolla in mind, but can likely be used on…
Having some pairs of Croc in heavy rotation, it is common to break the heel strap connector. So I tried most of the connectors already available, but found no one working to my expectation. Either you had to glue it or the clips were…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
This is a simple dovetail joint with a snap fit connector. It is handy for connecting two pieces together. It isn't very useful by itself (except to admire how cool it is). But you can integrate it into other models. I am going to use it…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
A quick and easy Corvette logo. Prints beautifully in single or dual colour.
Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…
Interlocking storage drawer system that uses dove tails for the connectors. The set files have 4 of each piece To connect the handle to the drawer I recommend just using a drop of super glue.
I like to print without supports. But the hooks for Skadis where allways hard to place in way, the didn't need andy support. That's why I decided to print them on their own and mount them with a sort of dovetail. This is the download for…
I could not find an acceptable 3D printable rivet, fastener for my Crocs' strap so I decided to make my own. Printed in PETG with 0.10mm layer height, no support. Please enable sequential printing at Print settings - Output options -…
This cartoon style model is inspired by 1970 Corvette C3 Stingray . Size is approximately: length 105mm, width 70mm, height 45mm) Only two parts to print No support needed Does not need any additional non-3dprinted parts (Note: Normally…
Overview. Wavetable is a customizable, 3D printed speaker stand for your desktop. Adjustable for height, width, tilt angle and more. The cantilevered design allows you to partially reuse the negative space below your speaker. Despite the…
Organize screws, bolts, nuts, electronic components, and small hardware with these 3D‑printable modular drawers , designed to be stackable and connectable using a dovetail sliding system on all sides. The design is compact, sturdy, and…
Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
A series of Dovetail Vises with several variants based off of Chris Borge's design. Includes a Short-Body and Standard-Body version and three sets of jaws: Flat, PCB, and Fractal. Bill of Materials and Assembly Instructions can be found…
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
After Watching Mr.Puzzles video on youtube and needing a money gift box for a friend I decided to make this seemingly Impossible Dovetail Puzzle Box and it worked really well and it is a really fun print. The "bottom V.2" has a much…
Corvette C8 Wall Art Easy to print for up to 100 cm length on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and…
A simple design for an AM/PM pill organizer, with a hinged lid and each AM/PM day detachable via dovetail joints. Going on a 3-day trip? Just bring what you need. Recommend PLA, 0.1 or 0.2mm layers. 3+ walls, infill as desired. No…
Simple Dovetail Wall Hook with hidden screws Don't forget to- like share print and follow!
This is a perfect replica of the Dovetail System by Microjig. Here two types of Track Nuts bots need to be used with M5 Insert Brass Nuts and two kinds of track screws: one for M5 Bolts and the other one to be used with M5 Insert Brass…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
A lockable pegboard rivet for 1/4" pegboard. This is based on similar designs I found on Thingiverse, but tweaked to my liking. Pegboard Push Rivets by Kenneth Stout Pegboard rivet by Jon Sanders I liked the general design of Kenneth…
Remix of https://www.printables.com/model/42109-bike-wheel-truing-tool Redesigned wheel truing tool for bike with w dovetail between two main parts to eliminate a need for gluing parts together. Can be used to trim the front or rear…
Being a huge fan of the Corvette brand, I had to make a set of silhouette models for each generation of Corvette in this style.
Please like model, if you are satisfied. Plastic one-use rivets for joining two pieces up to 4mm high, like paper carton. Post-Printing Category: 3D Printer Parts
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
Welcome to The Low Poly Auto Show! This is a low-poly 1964 Stingray. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
When doing my full disassembly teardown, and then reassembly, I found the rivets quite tough on the fingers so I've created a tool to help deal with them. This will allow you to re-use the rivets too. Printing Print on it's back with the…
Chevrolet Corvette C8 2020 Modèle de voiture imprimable en 3D, tout comme le vrai. La Chevrolet Corvette C8 est la huitième génération de la Corvette voiture de sport fabriquée par le constructeur automobile américain Chevrolet. La Chevy…
Print orientation has a huge effect on strength of this! PETG or ABS is recommended.
Secure it with three 4-5mm grub screws. The CAD files are included.
For my parametric pegboard drawers , I needed some sort of printable fastener I could use to attach things without needing support. I liked the idea behind some printable rivets I saw, but they were designed to be printed upright, putting…
This design can be incorporated into anything that requires to be attached to a dovetail-style NVG mount. Category: Sport & Outdoors
Rosie the Riveter. Rosie the Riveter is an iconic image of a woman who worked in factories and shipyards during World War II. The image represents the women who produced war supplies and munitions, and sometimes took jobs that had been…
Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx
Standard Gridfinity with a dovetail connection detail. Minimalist with a twist. As with my other dovetail models, no tools or fasteners required. These have a small bump bar in them to “grip” the bin/tray inserted into them; friction fit,…
Simple tool to extract rivets from the Core One. Just slide over a rivet to extract it. Prints well at 0.15mm or 0.20mm with either a 0.4 or 0.6 nozzle. Tested with both PLA and PETG. Best way to print is flat, not standing up!
A simple tool to extract Prusa CORE One nylon rivets. These are reusable rivets that are made of two parts, the outer sleeve and the inner pin. This tool extracts the inner pin which makes it possible to remove the outer sleeve from the…
This is a set of dovetail pegs that can be used to mount other models to the IKEA Skadis pegboard system. Utilizing this system bypasses the awkward nature of Skadis pegs and allows both the pegs and the parent part to be printed in the…
A prototype 3d printed replacment slider for the Rhino " NVG mount to convert it to the Dovetail interface. V2 included with a reworked pocket for the nut, which holds the screw in place that secures the mount. This should prevent the nut…
This is a series of clamp pads for the Microjig MATCHFIT dovetail clamps. The green rendered pads are for the swivel end of the clamp. The blue rendered pads are designed for the dovetail end of the clamp. Simply invert the clamp and use…
This model took a ridiculous amount of time to clean up to the point of being printable. Print instructions .1mm Layer Height. Infill doesn't matter much. Glue together when finished.
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.4 We have fully implemented the updated design, refined and cleaned up all geometries, and optimized every feature for reliable 3D printing. The result is a stronger, more…
Here is a 2020-Present C8 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
Drawer to organize screws Gaveta para organizar tornillos
Please click ❤ LIKE ❤ if you appreciate my work 😊 The American icon of speed – now as a stunning wall art piece. This 3D printable Chevrolet Corvette C7 model captures the sleek, aggressive lines of the legendary American sports car.…
This clamp was designed for easy mounting of ASIAir onto a vixen dovetail clamp. You need to install a threaded insert onto the moving jaw for smooth movement (I used the ones from CNC Kitchen) and provide a ¼ - 20 long thumbscrew for…
This is my model of the Ancient/Asuran Light Corvette from the Stargate Atlantis. The model is a kit and does not require any glue. The antennas are skipped modelwise and are done with toothpicks. I divided the model based on the color of…
No additional hardware is required, just open the back to release the extra cables that are tucked inside. No supports are required, see image for orientation. You will need a spool holder tube like the ones for anycubic printers for…
Nie je to len ozdoba do vlasov, je to najsilnejší ochranný amulet, má liečivé účinky, je to zároveň najstarší symbol používaný na našej planéte. Je to vzorec, podľa ktorého bol stvorený svet. Tlačené z materiálu Silk Gold na zrnitej…
Model of Formula 1 helmet. TIP: To get optimal result don't make the model smaller - letters could be unreadable. The bigger it is, the higher details it has. NOTE: Helmet isn't filled out, so don't forget to use supports, (I recommend…
Remodelled from https://www.thingiverse.com/thing:3728184 I found the original version a bit stabby and didn't work well with M6 hardware. Category: Tools
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
I have a bunch of Jig making nuts, bolts, knobs that use ¼-20 size, and I wanted to use them with the Matchfit system. Remixed to allow use of the bolt heads and another for flat heads/T-bolts. UPDATE 02/24/25 - Reuploaded the STLs to fix…