605 models
A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for PETGSource material: PET
The Historical Chess Set Series #15 - Old Windsor Castle Chess Set We know very little about this rare set of chess pieces. In the 1820s, I. Parker, a wood turner from Eton and titled Turner to Her Majesty the Queen, crafted this souvenir…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for one variant
One of my first practical models. I printed from PETG and it has worked perfectly for more than two years. Uploaded model of windshield is without picture of the biker. For assembly you need (windshield with the holders) 2x Allen screw M6…
Print approx. €15.71–€19.20 excl. taxPreliminary estimate for PETGSource material: PET
Tool for trimming your windsurfing sail. Check our board protector on www.bumpr.be
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
I have found that the inside of my wetsuit boots struggle to dry without being propped open, which is difficult to do, especially when away. So, I quickly designed this! These are designed to go inside your wetsuit boots to keep them…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
This is just a simple remake of the official support. One of mine melted due to extreme heatwave and the second one broke on a bump. Decided to design them in Fusion360. I made them a bit thicker. 5mm instead of the default 3mm. Added a…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet A tough, reinforced ice scraper designed specifically for car windshields . The geometry focuses on durability, comfortable handling, and reliable performance in freezing conditions.…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…
Print approx. €5.32–€6.51 excl. taxPreliminary estimate for PETGSource material: PET
wall art girl on windsurf
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
weitere Beschreibungen , die Liste der Zukaufteile und Zusammenbautipps finden Sie demnächst überarbeitet bei meinem Haupt-Ursprungs-Model “Sensitiv Storm Guide”!
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
The crusty looking images are the original part being replaced. I redesigned the original piece to make it easier to print and eliminate some odd design flaws that lead to the part failing in the first place. It should fit both round and…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
A handy storage unit identifier for my Windsurfing gear closet.
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Two Windsor side chairs, same proportions: 1:6 for fashion dolls and 1:12 for dollhouse scale. One solid body, four flat feet, no supports under the legs. The seat is the only real overhang, so the gcode uses break-away supports that stop…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
It's kinda awkward to pour in fluid under the frunk, so hopefully this will make it easier. It fits really well, snug but loose enough for guaranteed fit by any printer. I drew a compact washer fluid funnel for Tesla Model 3 using…
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 64”. I have…
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 72”. I have…
The provided gcode files use Prusa Slicer infill density modifiers to provide more infill towards the scraping tip to make it stronger. The new version 2 model includes ripper teeth.
1/10 scale windscreen wipers for classic cars (60ies to 80ies)
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. I recommend using a standard metal…
Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…
This is my fully printable Version of an Windscreen cleaning tool i wanted it to be fully printed on every FDM printer and as small as possible. Just put your desired towel on it :) I suggest printing it in PETG due to sun in a car. Only…
just print and ur done
Introduction Refilling windshield washer fluid can sometimes be a mess, but not anymore! This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid. Features Handle: This funnel has a…
I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…
This is an OpenSCAD (https://openscad.org/) script to create a replacement windshield washer hose clip for a 2018 Tesla Model 3. After 5 years in the Phoenix sun, the plastic clips that hold the washer hose in place on the wiper arm broke…
My neighbour lost his cap on his 106 peugeot. I design it and install it, works fine, clips good on tank The flange is too hard but you have to smooth it with a lighter. I design with an hole but dont see on print, too small so i drilled…
The funnel was designed to fill the wiper water. To avoid stringing during printing, I recommend printing the funnel only with wall lines (vertical shells 5 lines). Der Trichter wurde zum auffüllen von Wischwasser entworfe. Damit das…
Fitment: This part is for conventional wiper blades and hook type wiper arms (refer to diagrams): Printing: Material PETG or better (needs to withstand outdoor conditions and heat) Nozzle 0.4mm Layer Height 0.2mm Infill Density 100%…
30-40% infill is recommended. Bump up to 4 perimeters as well to fill the walls. Organic supports does make it easier to remove, but regular grid works fine as well. A remix of a model uploaded by Pavel Mironov on Thingiverse. The…
I was not very happy with the stock windshield of my Royal Enfield Himalayan. It created turbulence right where my helmet is, making my ears ring and my neck tired. Realizing that removing the shield altogether was a great improvement, I…
Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.
Since my cap for my windshield washing system was distorted and didn't fit anymore, I designed this model. It should suit all Clio III models, but I'm not sure. I'm driving a Clio 3 GT, 2009, sold on the german market. Material:…
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details. Test fit showed a good tight,but not too tight fit. edit: 9.3.2018 - added a version…
Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own. I've desinged a range of caps for various Ford vehicles. Tested on multiple models,…
I designed a new one to replace the hose connection piece that broke and caused the washing jets to become unusable. It was made in similar dimensions and its interior was designed in accordance with the original to ensure equal water…
Cone Shaped Windshield Ice Scrapper. Designed in blender with help from StableDiffusion for creating Greyscale depthmaps of crystals.
Opel corsa c windscreen washer cap. Printed in Tpu. Approx 1 hr 15 min. Infill 20%. No supports. I added anti warp tabs to print - may or may not be needed. Would not recommend white tpu.
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Best material would be ASA because it can handle outside weather conditions well (especially sun light), but any material would also work. The hole on the inside could be used to inser set screw or flat head screw for final tweaking of…
funnel for ford focus 2 (windshield washer fluid) or other with hole bigger than 32mm. Printed with PLA (use brim, no supports)
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
This model is meant to be printed on it's side with build plate supports at a 0.1 or similar layer height. After printing use a small drill bit to clean the inside hole and also sand the outside surfaces to make the hose fit better. I…
A remix of Thelguana's design intended to be printed in TPU (or other flexible filament). I added a retainer strap with loop that fits over the neck of the reservoir opening. I also added a logo to indicate what the cap is for. I printed…
Fun outdoor windmill remixed from mobiobi's Airbus H145 Helicopter and modified with parts from PRINTER's windmills ( Windmill and Windmill XL ). It is an easy print (don't be intimidated by the number of parts) that needs no supports or…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Fiat Ducato Windshield Washer Tank Cap Printed in TPU, no Support, 20% Infill
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
This rubber band-powered car is easy to build and even easier to use. It is an original design which features a 5:1 beveled gear ratio, a print in place bearing, a locking mechanism and is wound up by a powered drill! Notes: .gcode and…
This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…
Hier hab ich ein Paar Scheibenwischer für den Ford F350 von Tamiya. Der linke ist etwas stärker abgewinkelt, der rechte etwas flacher. Here I have a pair of windshield wipers for the Ford F350 from Tamiya. The one on the left is a little…
UPD. Infoced the version with icon. Designed a suitable and improved windshield washer reservoir cap model for BMW E30, instead of the one published by Exotechd. His design is very beautiful and concise, but unfortunately, it doesn't fit…
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
The cap holding the actual rubber blade of the windshield wiper broke off mid drive so instead of buying a new set of wipers (since the blade is still almost new) I printed a replacement. I printed it in PLA and later painted it black…
You probably know the feeling... Your hands start to hurt when tensioning the sail and you have less grip than you would like. The trimming aid solves these problems in one fell swoop! The user-friendly design helps you to tighten the…
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
Print with TPU, 3 or more walls, 0.2mm layer
can be left next to car battery for everyday use. it fits in my octavia 3 Brim is nessesary!
This is a simple cap for M8 nut holding the windshield wiper arm. The print needs supports and I recommend using ASA or other high-temp and elements-resistant plastic. I've designed it for Skoda Octavia II (1Z), but should be pretty…
A replacement for Toyota FJ Cruiser windshield Wiper bolt cover. *Support not required *Print with heat resistance material Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.15 ~ 0.2 Infill:…
Supports: not needed Infill: 10% recommended Rafts: not needed Print material: any
This model is compatible with the lego system.
This model is compatible with the lego system.
Print with some strong settings. I printed this with 3 perimeters, 50% infill, PETG, 0.6 nozzle. I printed it on its side (as seen in the picture and also add some supports to help keep it on the bed). When I used it, the plastic bent a…
Jeep JL Wrangler Front Windshield Air Diverter Improved airflow for the JL Wrangler front windshield to get corner areas that don't defrost or fog up. This model was based on the JK Wrangler diverter that was found on Thingiverse…
Windshield Washer Fluid Cap - With and without print-in-place hinged lanyard. Example in photo was printed using PETG 100% infill without support or brim to fit 1998 Nissan Frontier. (2.25 inch)
Subaru Windshield Washer Tank Cap 2018 Crosstrek
An adjustable quick-release mount for the Valentine One Gen 2 radar detector. Uses magnets to handle the quick release aspect: you have to rotate it out to get it out. Inspired by the DS1 mount (https://www.rdforum.org/threads/113691/),…
This is our adapter for using RDM Masts without changing your boom head. It increases the diameter on the mast from reduced to standard diameter. This adapter is an universal design, which fits all brands. Just measure the hight of your…
its a surfboard but you surf on the air outside your window in the car when your bored
Edit: Updated model! Improved tolerances and added more rigidity. The cap of the rear windshield wiper of my car went missing a long time ago, I have now finally found time to design a replacement. Works for my Toyota Aygo AB10 from 2012,…
Replacement cap for washer fluid reservoir on a 2001 Nisaan Xterra
Are you as stupid as me, breaking your windshield fluid cap on your precious model 3? And you don't want to spend big bucks on a piece of plastic that costs less than a euro/dollar to produce? I broke mine, and I was quoted 100 euro for a…
Remixed from https://www.thingiverse.com/thing:3769718/comments Modyfield construction, and working good ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: you choice…
As a tall rider I prefer no windscreen to have the least amount of buffeting. However the NC would look a bit strange with just the stock screen removed, and since none was available for the best commuter bike ever from (big H brand…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Update: version 3 has cutouts on the side 2mm deeper. Use files from folder for version 3. wiper_stand_v3-Deep.3mf file has 3 instances printed sequentially by ASA fillament wih brim. Stands supports wipers little away from windshield, so…
Requires 3 bearings like those in picture, been playing around and maybe see if I can make my own windpower :)
w638 vito spare part shifter windscreen trim clip
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
This is a replacement for the Volvo Windshield Washer check Valve. Mine was broken and I bought some replacements but they were not original. The original part has no stock. The ones that I buyed don't work well and I decided to design it…
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
Clamp on Windshield Phone Holder for MGB or MG Midget NOTE: PRINT THE GoPro VERSION. It's just better. Also, I completely re-invented this mount from the ground up and that version is available here . I needed a special mount to secure my…
These little guys snap onto your glasses/sunglasses for extra cool factor. They should fit just fine on most plastic-rimmed glasses (see photo above) or similar. Print both the arm and clip parts with supports on, and after printing and…
This model is compatible with the lego system.
I designed this for my F10 M5 and Escort Max360c radar detector, but I'm sure it will work on other makes and models along with most current Escort detectors. This allows you to tuck the detector up close to the roof right between the…
My first attempt at a paint tube squeezer key. It's like those keys people buy for toothpaste tubes to get all the toothpaste out of the tube, except this is for paint tubes. This specific key is for the Winsor & Newton 14 ml (0.47 US fl…
Ice scraper for car windshield with replaced blades. Print new blades as many as you want! Once the old blade wears out, there is no need to re-print the entire scraper, just print the blade only! For free available basic blade.…
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
Print the whiper in the given orientation. After printing, you need to brush the tip of the whiper with a smal lighter flame in order to make it soft. Bend it 90° to fit on the Armadillo
simple air guide for mounting on the original windshield holder. May help with booming wind noise by rear ventilation of the windshield. Due to simpler printability, the part must be adjusted to the curve after printing using a hot air…
Windshield cleaner water cup replacement. Print with TPU.
Windshield Wiper Cap for Kia Ceed
a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will…
