534 models
After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. It should be a good starting point for anyone trying…
Latest Update on 10/18/24: For latest profile use - Folder: ORCA Profile Creality CR 10 SE_Enhanced_10_18_24. Check out Screenshots for performance results. I have created and extensively tested these profiles. It has given great results…
Filament guide for Creality CR-10 Max / CR10s-Pro. Prints in one part, no supports, no extra parts, press fit. Updated version adds opening at the tip of the guide for easier feeding and pushing of filament into filament sensor and bowden…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Originally published here: Xiaomi Redmi Note 10 & 10S m2101k7 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
This mount allows you to install the awesome case made by JimbalNy. ( https://www.thingiverse.com/thing:4153427 ) I installed it on my Ender 5 Plus, but it should work on the CR 10S PRO V1 or V2. It uses the same bolts mentioned. If you…
This is a 2 parts quick print to attach a Spool on top of the Creality CR 10 ptiner. Use the provided steel bracket as part of the assembly. The print of each part takes About 30 to 40 minutes. Category: 3D Printer Parts
For better use of space and organization I made this neat stand for my CR-10S onto which the control box can neatly stack. It features two smaller drawers at the back that can be used to house a Raspberry Pi or other small devices with…
mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!
This is a simple filament guide, quick to print and easy to attach. I printed it PETG and combined it withthe spool holder i also designed for CR-10. Category: 3D Printer Accessories
Here is an Orca Slicer printer preset for your Creality CR-10S. The profile includes a printer preset file, a process file, and a filament preset file. This is a simple preset to get your printer up and running well on Orca Slicer. The…
V2 NOW RELEASED Note: This will NOT fit the Ender model hot end at all. Only CR10S Pro model from MicroSwiss. ( https://store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10-pro ) This work is a…
Compatible with: Extruder: M3213 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: Micro Swiss All Metal Hotend Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S…
Remixed from the Voron Switchwire x carriage, this mods lets you mount a Stealthburner toolhead on a CR-10s pro (tested) it could work with other CR-10 and Ender 3 style printers (not tested) I run klipper but I use a octopus board and…
Update I thought I could increase the airflow a bit more, allowing it to focus even better by cutting out a bit more material. There are two additional versions. One with a crescent cutout and the other with more of a 'ramp'. Every little…
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max. The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer…
reupload of the first modified fan duct that actually is an improvement over the original that I have found. I'm reuploading this model since i couldn't find any good ones on Printables
Simple phoneholder for our Renault Megane III 2013. It hooks safely into the vents and the hazard switch and unlock button are accessible. The holder gives a tight grip on the phone with the original silicone cover (that comes with the…
Replacement for the stock Improved CR10S Pro part cooling fan duct File types: .stl - Ready to print .f3d - Editable Fusion 360 file - Includes a 3D scan mesh of the stock fan and extruder
As I will change the default extruder and print head to a new one I needed a model of the current X Axis Plate of the printer. So I've tried to measure everything correctly. BUT it may be that there are still some mismatches between the…
This is the control box for my CR10s All In One project. The control box houses the BTT SKR Mini E3 v2 along with a Raspberry Pi. I converted my CR10s from 12v to 24v. I design this case and the power supply to not need any supports. You…
can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…
This is an extremely cheap filament guide I made to prevent filament from grinding on the runout sensor on the CR10S Pro V2. I've used mine for hundreds of printing hours, though. It's bent a bit, but still works. I intended to replace it…
After upgrading my CR10s Pro v1/v2's to the Microswiss all-metal hotend, I've struggled to find fan ducts that directed air flow properly. Most fan ducts that I've found have had four issues. 1 - They don't direct air low enough. 2 - The…
Updates: 2020.05.23 Added from my Direct Drive smooth fang kit (see preview image): New variant with a reversed fan orientation. It also features vertical height adjustment (needed when using different hotends) and a cutout for full 5015…
For my CR-10 Max I did my own kit which allows you to use belt which different length (approx. 1200mm to 1600mm). This Kit only works with the “on top of flipped brackets” pulley setup, but is very minimal and creates not unsymmetric…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Spool holder for frictionless spool rolling. use with 608 Bearings Category: 3D Printer Parts
An adapter for installing VORON Stealthburner toolhead on your Creality CR10S-Pro (if V2 shares the same X-carriage plate, then it works for V2 as well). Just use this adapter to connect stock X-carriage plate and the SB assembly. The…
This is a modification of the OEM Creality CR-10s Pro fan duct. The original fan duct has a crazy thin tab where it attaches to the fan, and it breaks very easily. I thickened that. It also has a slant to the bottom which makes for…
10S4P (36V) 18650 Li-Ion battery pack for e-bike remixed with tiedown slots E-bike battery pack with case, and 18650 battery holder for 40 cells remixed with 3 slots for zip-ties or other tiedowns
The Led strip is supplied directly with the power supply of the printer. You need: LED Strip https://www.amazon.de/gp/product/B08JY5C6G7/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 Toggle switch…
Makita Battery Charger DC10SA & DC10SB: This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger. It fits with the Makita DC10SA and B. print setting: PETG (but PLA should also work)…
I could not find any Soda bottles for my daughters dolls. So I created this basic scaled 1/10 2L Soda bottle. Print with lower layer height as they are small, 0.1 A brim is suggested if you have issues with bed adhesion No supports needed
This is a buildplate for the Creality CR-10 and CR-10S to be used with PrusaSlicer. Created with InkScape 1.1 In PrusaSlicer: Open Printer Settings Click 'Set ...' under Bed shape: Under Texture click the 'Load...' button Load the file…
So its a modified Sean Fields mudtrooper E10m with options for resin print and fdm parts (scope/counter etc) There is also options for additional side rail and cattle prod rail as these were seen on Andor also . Thanks goes to Project 842…
was flabbergasted that despite the multitude of various fan ducts floating around Thingiverse, NONE of them seemed designed for the CR-10S Pro V2 and Micro Swiss. This duct is designed for: CR-10S Pro V2 BLTouch Sensor Stock fans Micro…
This is a remix of the side Filament Spool Holder by builditfull, made to work with the Creality CR-10S PRO. It mounts on the side screws, and on the 2020 side-rail. By having the spool on the side, filament guides are not necessary…
On some Creality CR printers that use the red aluminum housing for the filament runout sensor, there are 2 common issues. (Cr-10 Max, Cr-10s Pro, Cr-10s Pro v2, maybe others?) 1) The incoming angle of the filament when printing over time,…
onjour, Voici ma version de guide filament inférieur (entrée détecteur filament). En photos les étapes d'assemblage. Vous aurez besoin d'un galet à roulement comme celui-ci : (Type C avec roulement) https://a.aliexpress.com/_TwQWh…
Update:19\06\20 Uploaded Step File. Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link:…
Basically an adapter board to fit an SKR Mini E3 V3 in a CR10s Pro using the original mounting points. Had I not already pulled my CR10s Pro apart, I would have re-printed to better align the USB port, but ended up just drilling a hole…
This isn´t my own model it´s remixed for better fit on my CR10s PRO V2 Fan duct was mounted too low and the exhaust was too long so it was hitting my prints and ruining one of them after it snapper after the drag on printed layers so this…
After years of experimentation, calibration, trial-and-error, and countless hours of printing, I’m finally sharing what I consider the Best of the Best CR10SE profile . This profile has been carefully developed and extensively tested to…
Bonjour, Voici ma version personnalisé d'un guide filament supérieur pour CR10S PRO V1 et V2. J'ai pris pour base le guide filament de @Sharklade ==> https://www.thingiverse.com/thing:4100856 Lors de ma première version, j'ai dû chauffer…
This is a fan remix for the Creality Spider Hotend.
Just a simple IO shield for a Supermicro X10SRi-F motherboard. I recommend printing in PETG.
UPDATE: 2021-03-31 I have added EZABL mounts (standard/mini) which are just an extended version of the cable clip/holder. I personally own the mini version but I also made the mount for the standard one based on my tests with the mini and…
I was getting tired of the bowden tube working itslef loose from the hot end on my Creality CR10S Pro so I designed this stabilizer that snaps into place without any need for screws. Note that i made a slot to push a zip-tie thru to…
January 2022, SKR2 board pinout, instructions and Marlin configuration files coming soon. CR-10S Pro SKR V1.4 Turbo Board upgrade. Check suitability of cutting guide for your placement before use. 27/07/2020 updated .pdf of breakout…
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
This model includes 2 pieces, an upper and lower case for a 10s2p battery pack. Dimensions are 150x95x76mm (about 155x100x80 after heat shrink wrap). 8mm wide slots along top and bottom for 8mm nickel / copper strips. The design loops…
A block for making sure the gantry of the Cr.10s pro is equal distance, to prevent misalignment. Nothing fancy, just print two. Check out my other models here
I got a secondhand Lenovo M910s and waned to put an M.2 NVMe drive in, but there was no bracket there to secure the drive. So I designed one that slots to the retaining slots. You just need to put in a heatset insert and then screw down…
Remixed filament Guide with 2 wheel to guide your filament from above or below,tested on Cr10s Pro also work on Cr10Max only required 2x 608 Bearing Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: Yes…
Compatible with: Extruder: M3313 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S Pro V2 CR-10…
Update 2020/07/29: Added STEP file for project. Update 2020/02/10: Updated arms to have greater support for the weight. I designed this camera mount to be used on any 2020 or 2040 extrusion-based printer. You can mix and match the various…
I designed this to fit my CR-10S Pro V2 after having tried a couple of other designs that were available online and never being quite satisfied with them. I have swapped out the stock blower fan for a pair of 5015 blower fans (cheap from…
This is a motherboard cooling fan mount, for 80mm size for improved cooling and silence. Original Post: https://3dprintbeginner.com/cr-10s-pro-upgrade-80mm-motherboard-fan-mount/
The small debris which my printer creates was getting out of hand. I normally dyson out my enclosure after a print to clean up the scraps, but thought a small bucket may be a simpler solution. I designed this to stick on the side of the…
This is a simple fan shroud to convert the Creality CR10Spro to a microswiss (clone) hotend. Designed to fit two 4010 radial fans for part cooling and a 40mm axial fan for hotend cooling. Print with the backside down with support under…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
This is another modified version of the CR-10 display housing included in xxricsx's CR-10 Standalone kit: https://www.thingiverse.com/thing:2747280 The CR-10 like display that came with my CTC A10s printer has a flaky encoder and some dim…
Insert intothe tool box, printed from PLA filling density 85%, printing time 5 hours product weight 127 grams, consumed 42 meters of rod. As for me,it turned out to be an interesting organizer, now the tool is in order. In theorganizer…
Remixed k1nb0te‘s cable chain carriage part with a filament tube support from Portzal's Hotend Cable Keeper. (works on Creality stock hotend) Also tightened carriage's mounting tolerance a little bit; cut a corner in order to avoid…
There are already a lot of z height blocks around but I was looking for maximum precision while haven also a maximum ease of use. I found some designs leveling x to y rails which would give maximum precision, so I went for this concept.…
If you want to upgrade your CR10s Pro V2 with microswiss hotend but keep the bowden tube setup. You will found that the microswiss all metal hotend is too short compare the original hotend. And the BL touch (not deployed) will be longer…
Trying to mount the VORON Afterburner direct drive print-head to CR10S-Pro with stock gantry plate. Based on VORON 2.4 Afterburner tool-head. http://vorondesign.com/ for more info and original STLs You need almost everything that requires…
Here's my version of a camera arm following the z-axis on a CR10S Pro (v2). The screws of the belt tensioner on the x-axis can be used with no replacement, by still having enough clearance for the nozzle to move it's full way. This is…
This is a filament guide for the Creality CR-10s Pro and Max printers. This print uses Skateboard Bearings, they should be the following (or equal specs): https://amzn.to/3a5lMvb These are constructed in a way so they do not need any…
I wanted to keep the printer apparence as stock as possible. The upgrades Silent fan upgrades: power supply fan replaced with Noctua 4020 12v fan motherboard cooling fan with 2 NoiseBlocker 4010 12v fans hot end cooling fan with Noctua…
This tools storage allow you to store a brush, an empty bag, the cleaning tool and an other place for accessories as the tricut spare brush. To fix it, i used 3M Strips to avoid to drill holes in the vacuum station. Print it upside down…
This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S. There is a more recent version at the following link: https://www.thingiverse.com/thing:3259429 In this remix I have: 1.Sculpted the component…
J-HotEnd (OD 22.3 mm) mount for Creality printers such as Cr10/CR10S and most likely all other printers with common X carriage plate. Attached - all STL files and for a convenience same files in 3MF format. PLEASE READ design…
Remix that extends 9v crate capacity to 10.
Have made the switch to Klipper, wanted to make use automatic resonance measurement which requires mounting an accelerometer to the printer. Hopefully this is rigid enough (I printed it in PETG but probably should have printed it in PLA.…
Print with notch facing up. and use M5 hardware.
This is an mount on the CR-10S 3D Printer, to Mount a Bondtech BMG and a Slice Engenering Mosquito Hotend in a direct drive configuration on the CR-10S, as well as a 40x40mm Fan mount for part cooling Parts are designed in Fustion 360…
This is an adjustable mount for the X axis endstop to suit the CR-10/CR-10S. The design is based on the stock endstop mount but allows for an adjustment range of 8mm allowing the nozzle to be centered within the printer's build platform.…
This is based off of another design. Thanks to madmodder123. You need to make sure that this is 100% infill to keep it from breaking. I have had over 40 prints since putting these on and haven't had to relevel. Each piece should be…
Creality Cr-10s Pro v1 nozzle cleaning brush mount. Used to clean your printer nozzle before every print using a macro in Klipper. This mounts on the front right bed screw and slides onto the roller carriage. I used the standard brass…
CR-10S Pro Heater bed cable strain relief. Along with normal printing I have run some torture tests to check for layer shift or excessive friction. I have had no issues. As a result of not having to drag the cable from the case there is…
Il s'agit uniquement du modèle 3D de la tête d'origine pour ceux qui souhaitent lui apporter des améliorations. Souhaitant justement adapter des ventilateurs plus silencieux, je n'ai pas trouvé de modèle 3D de bonne qualité, j'ai décidé…
This model is used to put a battery pack into of an electric scooter. This is currently in use in my ninebot. Your can also use just one cell holder module for other purposes, just as an helper for point soldering. The BMS is to be put…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:16_01_20 Uploaded…
I found the initial design interesting, but I added a no bearing wheel and a additional guide so the filament will not detach from the wheel, when the tension is reduced. Also the original sensor bracket is not allowing the filament to be…
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro (V1). The Direct Drive Extruder will work with both the shorter Ender-3/CR-10 All Metal Hotend (4-finned) as well as the longer CR-10S Pro All…
There are already a lot of z height blocks around but I was looking for maximum precision while haven also a maximum ease of use. I found some designs leveling x to y rails which would give maximum precision, so I went for this concept.…
Description I upgraded my heatbed to use a silicon heater pad, and wanted to be able to easily attach/detach the heatbed and add a thermal fuse. I've used Wego221 lever nuts to make life easier. This mod will also work for folks with the…
What you are seeing is my desire to make sure my dual z axis is leveled every time. I use a Lerdge controller with separate Z steppers, which made this much easier to maintain leveling between each side every time. Hardware includes: 4 x…
A modified version of the CR10 Stand Alone mod with support for the mks tinybee. I have not printed this yet so I cannot guarantee it works Category: 3D Printing
model in fusion 360 print PLA 300 speed no support
Print this part on a diagonal (as per the pic showing part on the bed) to avoid needing supports and to make it stronger. I've used petg. Four shells, 50% infill. There is a zip tie hole at the back. I have the small bowden tube feeding…
You can print this model if you own a Maginon QC-710SE WiFi and need a replacement motor cover for your drone. I suggest using any clear filament so that the printed part won't block the LEDs from the drone. Do you like my models?…
After switching to BMG extruder + e3d v6 direct drive, I couldn't get the nozzle low enough without running into the default z motor mounts. This low profile design allows for lower x carriage position and holds the motor more securely…
Print Settings : I printed it with this settings from PLA and PETG-CF all good. Layer height 0.2mm or 0.16 for nice finish Walls 4 - depends how strong you want it Top layers 5 Bottom layers 3-4 Infill density 15%
This is fan duct for creality printer CR10S Pro V2. I guess it will be working even for other printers which has similar hotend. It's used to replace the noisy creality fan with the noctua fan. Thanks to the fan duct the air from the fan…
![M3213 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/708204/images/5555713_8b7f26de-9baf-492a-88e8-974cc5c550c3_fc37e3b0-22ff-4c0a-b299-f9c920073f02/image1.jpg)
![M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698885/images/5548157_c7549b92-7fcb-44ea-9ad1-861608b9eaeb_57d87105-28a0-4e7f-aad3-ed996f07f4f7/image2.jpg)
![M3313 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/837537/images/6451803_5213a1a3-439d-4693-8579-b0e2f4eef1d6_6586a5bd-5a76-445a-ad1f-8cdcec2938fb/imagea.png)
![M2601 CR-10S Pro [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698867/images/5488428_cf6040e2-edf1-42df-a822-2df0fbd212bb_dcaf0d21-3a00-4c2d-8acc-0617717dbed8/image1.png)
