Counting matching models…
This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…
Wanna get the commercial license? Have a look at my printables club. I didn't like the original cupholder for my e-class so I made my own. The original holds just the cups, but I wanted it to be also my phone holder. I also had a little…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
This model is compatible with the lego system.
A wall hook for the Lego Ferrari to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are sized…
An offshoot of my project https://www.thingiverse.com/thing:4606971 RC Pump Jet boat, I modeled a stand alone water jet originally intending boat to be modular in design. After consideration I decided to just integrate the pump jet with…
Wall mount for LEGO Technic 42127 BATMAN batmobile. Wide area for double-sided tape and solid hold for front wheels. I used Pattex Fix 120kg red tape to stick it on. Update: Stronger sides for not bending Need a supports under the logo,…
This model is compatible with the lego system.
This model is compatible with the lego system.
Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear. Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis…
Two angled parts for the Rugged Extreme Tablet to create a handle. You need a few extra Materials for this. Firstly, a rectangular tube with 15x15mm and a wall thickness of 1mm. Cost: ~5€ for 1000mm My tube needed to be cut to a length of…
Junction box for Reolink RLC 810A, 1212A etc.
It is so easy to find this shaft broken in the joystick pad of the mercedes E class and C class. You can print this one and save yourself $200.
mount for most typical engines like A2212 https://s.click.aliexpress.com/e/_Eu7fG6f or RS2205 https://s.click.aliexpress.com/e/_EvxsxhZ I‘ve made this because RS2205 is sold without mount, screws only PETG 100% infill weight is ~2-3g
### Mount Mount provides a channel in the middle for smooth cables placement so those do not hang around freely. To mount A2212 bldc motor use default provided screws. Surface mounting holes are ⌀4mm ### Holes placement Be aware those…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
This model is compatible with the lego system.
This model is compatible with the lego system.
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings I recommend to do a color change by script and use a prime pillar
Filament: - JAYO - white - PLA+ - ERYONE - Marmor - PLA Objektgröße: ca. L:B:H in cm 14:17:25 Drucker: Bambu Lab X1-Carbon Düse: 0,4 Schichthöhe: 0,2 Infill: Variiert zwischen 5% und 10% Stützen: keine Druckzeit: - Fuß: 2h:52min - Block:…
G-Scale 1:29 20' Shipping Container Box 212mm Long - This is the same container I already posted but this is 212mm long and is the same size as the ISO Bulk Tank and the 20' shipping container chassis I have listed. Print out the…
Print instructions: Layer Height: 0.2mm Infill: 50% Infill pattern: Honeycomb Perimeters: 3 Generate supports: Yes Auto-generated supports: Yes Hardware: 1x A2212 brushless 4x M3x8mm bolts 4x M3 washers 4x M3x15mm bolts 4x M3 nuts…
An HSW panel of 8 rows and 8 columns that was made by starting with the “106x89-fixed” original panel found here: https://www.printables.com/model/152592-honeycomb-storage-wall/files And then making the top "flatter" while maintaining the…
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
This model is compatible with the lego system.
A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…
NEW GENUINE MERCEDES BENZ W169 W203 W204 W209 W212 - BALLPOINT PEN HOLDER Since my pencil holder cracked, I drew new one, which are a little stronger in some corners, but it is very similar to the original one. Work perfectly! Printed…
Simple rain cover design to be attached with a (4-5mm wide) ziptie to the camera. It keeps the microphone hole in the casing free. Print in any material, but recommend PETG 0.2mm layer height for precision and durability. No supports…
This is a Conversion mount for the Hobby Zone Super Cub LP to fit a standard size 2212 Brushless Motor Using the common 35mm X mount normally included with a new motor (I am using a Emax XA2212). This mount maintains the stock thrust…
Buttons transfer panel for Niva Chevrolet VAZ-2123. Material: PETG
Rapid EG212 Hot Glue Gun Holder, based on Hot Glue Gun stand by marigu. The original model was too narrow so I modified its mount and bowl.
Dell 7212 / 7220 Rugged Tablet Handle Complete 3D print no metal
English V2 : Added more space for the 2212 and different gears. Modifications to be able to run the openRC F1 Car with the cheap A2212 Brushless . With these two pieces one can drive the openRC F1 with it. I did this to make this build…
Originally published here: (WIP) Motorola Moto G20 xt2128 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. . For different reasons, I have trouble to test some of the phone cases I have…
This model is compatible with the lego system.
This is a personal design. The Miter Saw Handle Fits a Craftsman Model #137212370, I printed this with 6 walls and 98% infill using PETG on a Creality Ender 3 Pro. This was my first time using CAD any tips would be welcome. Fill free to…
Simple replacement drive gear for Dremel drill Press Model 212 Type II. The original had a couple missing teeth to limit travel, this does not. Original Drill Press was for use with Dremel Tool Model 275, 285 and 395, may work with…
Modification to anchor the bracket with screws to the wall
Ducted Fan which can be used for impeller Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design Dimensions: - Axis "small" depth: 7mm - Depth: 13mm - "Small"…
This is a remix of Nikodem Bartinik's Toroidal EDF . It is designed for an A2212 motor and the fan blade has been modified to fit the included hardware. I took off the rotor from the motor to make it easier to assemble. You can find an…
Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…
Wall Mount Technicolor CGA2121 Wall mount for the Technicolor CGA2121 router. The router is inserted into the holder from the top.
This is a really great project that was created by talented people on the Neo - Arcadia forum. Victim of their success, unfortunately we can no longer order "for the moment" the complete frame kits to manufacture the project. In the…
I didn't want to pay $50+ for a kickstand so I designed this one instead. Requires three screws, two O-rings, and two thread inserts. Heat up the thread inserts and press them into the holes on the ends of the mount piece. Push screws…
X-mount designed for a 2212 brushless motor, ideal for use on foam RC planes. It features precisely modelled inner slot widths of 5mm and 10mm to create a tight press-fit into foamboard or pre-cut foam slots. While the snug fit helps keep…
The oddly-shaped throat plate insert for Craftsman Miter Saw #137.212290 wasn't too hard to recreate, which is great, since it's been discontinued and no longer available anywhere. Original part # is 2BK8. Original part is…
Low profile bracket for LSI 9212-4i4e SAS HBA adapted from https://www.printables.com/model/244218-pci-low-profile-brac
This model is compatible with the lego system.
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…
Body mount post for HPI Maverick Strada MT (2017 edition, MV12623), original part number MV22121 - Body Mount Post. Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which…
knipex 9721215 crimping pliers hsw
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
2212 Motor cooling impeller - note caution is warranted with the cooling impellers - the layer adhesion issues inherit to 3d prints makes it possible for the impellers to fracture under load. Wear eye protection and be mindful of risk…
The idea behind this case was to create something minimal, sturdy and without any fasteners. The T-Beam is aligned with the case through the use of a brace below the PCB, which locks it into place on the mounts so that there's no sliding…
It breaks for everyone, I've reinforced it, it's completely free. 3d print only petg. fill 20%. 3 wall/need Supports/ I'll take it from you https://boosty.to/vgnroff/donate
A durable plastic fastener designed to securely lock the hood prop rod in place. Resistant to engine vibrations and high temperature changes.
I designed 2 sizes. A longer one at 73mm and a short one at 63mm. Info online is 50/50 on which is better so I figured why argue and I'll let you guys decide on which one is better. Let me know how it works. I would personally print from…
Modeled in Fusion. Designed to be printed face down.
An organizer tray for PB Swiss Metric Hex Keys set PB 212.LH-10, based on the gridfinity system. IMPORTANT: this tray uses a 44x44mm grid instead of the standard 42x42mm grid. I use this spacing to fix my toolboxes exactly. If you want…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter Type 8212. The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter…
The compartment has a size of 90x78mm and the round recess has a diameter of 66mm its for EU 0.5L cans.
Wall mount for LEGO McLaren Senna GTR 42123
I used the design from https://www.thingiverse.com/thing:3085098 (thanks jeffreyheaden) I added to the design by making a back plate that I glued to the air filter adapter. I included a hose adapter for the PCV from the head. I think that…
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
A comfortable top handle with no sharp edges, designed for maximum ergonomics. The handle is slightly angled forward to
The nativity scene from 92212-nativity-scene-belen was one of the first prints I made on my Prisa Mini+. I wanted to have something to place the star of Bethlehem on and tried creating something in PrusaSlicer that worked but wasn't…
GoPro 9 10 11 Base Fusion C220 F212 15°/ 20°/25° Degres Tilt Not too tigh made on purpose. Print in TPU. It's really close to props for the Low profile version of F212 or C220. Post your makes!
Quote: "… Simple replacement drive gear for Dremel drill Press Model 212 Type II. … " Kudos to DavidKiefer for the initial model. This one includes the original joint to the shaft and mixed number of teeth. Printed with lots of infill and…
this is for the control button on the mercedes w212, made with a 2mm center hole for thread
Inspired from similar models, i created this junction box to place my cameras around the house. These junction box ease the placement of the camera. Size is either 100 or 110 mm Cover is either plain for any camera for Reolink 1212a or…
PRINTABLE ON PRUSA MINI DS212 Portable Oscilloscope carrying case with removable insert tray for accessories. Hardware required: 4x: 8mm x 3mm magnets 2x: M5x16 bolts Fits one DS212, one probe, hook attachment, and charging cable easily.…
Remix from fusion file. a bit stronger than the original. Category: R/C Vehicles
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Wall mount for LEGO Jeep Wrangler 42122
Material: PETG/ABS Infill: 100%
An Ignition key for some Doosan or Daewoo forklifts, Original key was marked with “212”, I modeled an existing key so I don't have any info on compatibility other than It worked in the Doosan machine I tried it in. Printing solid in PETG…
Model Siren. Fixed. The old version is still up (better for low quality tiny builds). Issue: Can't upload. Will do later
Wanted to try 2 fans on a Cooler Master Hyper 212 EVO. 1 intake, 1 outtake. With no screws. The pins are angled out to push the bracket out. Once attached to the cooler, the clamps out the bracket in. The in and out force to keep it…
I had an old Dremel press that I was not using, so I made a busing to hold a inexpensive princess auto soldering iron in place. The Dremel small clamp wedges the rubber handle, the larger clamp is what really holds the iron in place and…
Tisk doporučuji z ABS nebo PETG bez podpor, 100% výplň.
Make sure and share your makes and if you like it please give it a ❤ LIKE! I was asked to use e-ink displays from Waveshare to create reusable and customizable name badges. So I did. These are simple to print. Print them face down with…
Replacement for original extensions levers from 244.820.00.1 geberit type 212 flush valve.
This is is for the (pre-facelift 2010 and 2011) Mercedes-Benz W212 E350 I was laying my phone in the cupholder. This one props it up at a better angle. It is a donut so you can run the cable underneath. The phone slot lines up with the…
Summary Convert your spare A2212 brushless motor into a fan for some breeze! Materials and Tools A2212 Brushless Motor, with necessary electronics to power and control the motor, such as ESC 6 * M3 x 10 screws for attaching the fan cover…
Покупаем кнопку с фиксацией, например для кондиционера или включения подогрева для ВАЗ-2123, 2113-2115 и меняем накладку Накладка с иконкой видеорегистратора состоит из 3х элементов, для того чтобы было видно подсветку, необходимо…
Frigidaire Washer/Dryer Combo Adjusting Bracket 5303212877 Made this discontinued part for someone but they didn't end up buying it. Please help me verify the fit! Part Information This washer suspension spring adjuster insert (part…
Its plastic it breaks here's a 3d printed version that will save you at least 80 bucks goes together with m2 screws. Tested Works on my car. Put one piece on top of the sunshade and screw them together. Look at cad for how it goes…
Case to hold DSLogic Pro and DS212 space for accessories in the bottom. Hardware needed - 2 off 6mm x 3mm round magnets, 2 off M3 x 6mm POSI pan head screws, 2 off M4 x 30mm POSI pan head screws Print instructions Category: Tool Holders &…
This is an FDM optimized replacement part for the plastic female part of a Mercedes W212 2012 trunk well lid hinge. The model available for download is the right hand side. Mirror the file in your slicer to get both sides of the…
I have an after market air filter on my 2016 Harley Davidson 1200C. It uses a K&N E-3212 filter. I have two filters and rotate them at each service. These filters are washable. The last time I went to install the filter it seems it had…
I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.
lego 3030 3031 3032 11212 3035 3029
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…
Gridfinity bin for the PB 3212 LH-10 hex key set . The bin is 2x6 and 4 units high (28 mm). The tools can be lifted out easily. The bin is stackable, too. Also check out the corresponding bin for the torx key set, the PB 3411.H 6-25 .…
V2 : Added more space for the 2212 and different gears. Modifications to be able to run the openRC F1 Car with the cheap A2212 Brushless . With these two pieces one can drive the openRC F1 with it. I did this to make this build cheaper…
A puller tool used to remove the oil sight glass from the 42º or 90º gearbox on a Bell 205, UH-1, or 212 helicopter. The puller has two different size spacers (one thin, one thick) which may or may not need to be used depending on the…
