Gear Mount for PIXMA 2522 Feed Mechanism Gears
Gear mount for the gears of a Canon PIXMA 2522 inkjet printer feed mechanism.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
- Downloads
- 32
- Likes
- 4
- Rating
- 0
100 models
Gear mount for the gears of a Canon PIXMA 2522 inkjet printer feed mechanism.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale I wanted the Lego Bicorne for my skeleton. Did not have the skills to make it myself. So after a long time trying to make it,…
This model is compatible with the lego system.
This model is compatible with the lego system.
You can scale to suit but at 100% it just works and doesn't use that much filament. 0.15mm layer height using a brim. If you print multiple on 1 bed, make sure your retraction settings are dialed in as it will create multiple artifacts.
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale The real Lego Epaulettes don't fit on a real Lego Skeleton minifig, so had to make it a bit longer, so it will fit the…
This model is compatible with the lego system.
In honour of Pokemon Go's Treecko Community Day (March 23rd) I have knocked up a Treecko one piece model Needs supports! Print instructions Category: Creatures
This model is compatible with the lego system.
This model is compatible with the lego system.
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Cut-Off Tool…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is about the same as the Bambu Lab but its rotated 90°
This model is compatible with the lego system.
This model is compatible with the lego system.
Lego 25269 ( tile 1X1 Quarter Circle)
This model is compatible with the lego system.
This model is compatible with the lego system.
Two piece handle for Series 25 (25mm / 1in) Aluminum Extrusion Uses two 16mm M6 flathead screws Included step file incase you need to make changes. My hards are on the small side. I printed it upright, and on the side. And I think the…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
Compact 100x100 box with inserts for cutting discs, hex wrench, and arbor for 3" cut off tool. Milwaukee 2522-20 https://amzn.to/4lhKyMk I got this tool a few years ago because it was on sale and didn't think it would get much use. Turned…
This model is compatible with the lego system.
This variant supports the stock hex key that comes with the cutoff tool, and other minor improvements. Changes from the original: Hex key retention slot to hold stock M12 hex key that comes with the cutoff tool Arbor retention moved to…
T matice na matici o velikosti M6 do profilu 2525
T matice na matici o velikosti M4 do profilu 2525
Philips Air Fryer HD9252 Microswitch shaft. This plastic shaft is located on the right side of the basket and it's needed to actually start the air fryer program. Original part of my model broke making the whole air fryer useless. To…
Wall mount for Knipex 1252195 wire stripper with hole for M4 srew
This model is compatible with the lego system.
Dieser 3D-gedruckte Verbinder ersetzt das PLAYMOBIL-Teil 3773 / 3002520 , das in Fort Randall (3419) und möglicherweise in weiteren Western-Sets verwendet wird. Der Verbinder dient zur stabilen Verbindung der Palisadenwände und sorgt…
This one cuts at an angle, just not as steep as the original guards. It holds via friction-fit. I've tried snapping mech
This is a vertical desk stand for the Sabrent 252W USB PD charger (model AX-8PTC), a product recently popularized by Jeff Geerling and others for its great feature set. The charger has a IEC60320 C8 socket at the bottom. The stand is…
Hey Guys I created this model and I'm sharing it with the comunity so that all can have this Multi tool plunge for the Milwuakee 2526-20 I'm open to any feedback or any critisim any one has… I will be updting this model if it needs any…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20774 Thanks for your…
Soportes para atornillador worx, puede ser compatible con atornilladores de otras marcas Worx's Electric screwdriver mounting bracket. It maybe be compatible with other brands
Funnel and flow hood to convert a PM6252A digital anemometer into a ventilation calibration device. Adapter can be taken apart for storage.
This is a multiboard compatible hanger that I created from 3d scan I made of my Milwaukee Quik Lok 2528-20 power head. Print as oriented Print with tree supports for back multiboard attachments that are included in the file 15% infill
This model is compatible with the lego system.
I used 2525 extrusion to make a rack for my filament spools. These end caps let me mount the bar between two cabinets. See https://www.thingiverse.com/thing:3164553 for the matching spool holder. Category: 3D Printer Accessories
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
After the plastic had worn down for 2 years I just decided to make a new one. This is my first 3d Model.
This is a make for the popular IKEA ivar cupboard floor protection. There seems to either be a shortage of those or they are going out of production, I could not find them on the Ikea website any more. So I made my own. I added a screw…
This is a bracket for mounting the Geekworm P252 Raspberry Pi 3B+ case to a wall or other surface. Has two M3.5 size (#6 standard) mounting holes spaced at 40 mm center to center distance. I printed it with 0.3 mm layer height at 100%…
I have my U1252B hanging on the rack above my shelf. Originally I used the reverse-mounted stand for that. But this means whenever I want to use the DMM on the bench I need to re-mount it. This mount can be used to easily hang the DMM on…
Use 3 Screws to mount this to the Packout cleat: It is better to print in two pieces than combine the two parts in fusion, it would require supports to print like that. Recommended to print with 5+ edges and ASA for strength, durability,…
Rubber tires that can be salvaged from a Canon PIXMA 2522 feed mechanism.
After receiving my charger, I had to find a way to make a useful “charging station” corner. Ikea to the rescue, alongside the Skadis Universal Hook system! Hardware This design uses minimal hardware in order to securely mount it to a…
I use this on a rail mounted to the front of my Langmuir MR-1 CNC machine to hold ISO30 tools in their holders.
Zero clearance ioswert for a ryobi ebw 2523 bandsaw. Designed in Fusion 360 The orange insert is the original, the grey one is the one I printed. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2/0.3mm…
A flat Claude spark (starburst or inkblot) decoration. One solid part, intended for an orange, single-color print. Size and printing STL footprint: approximately 251.79 x 244.00 mm; thickness 6 mm. Upright artwork: approximately 251.6 x…
This is an old one that's been sitting around. The cut off tool comes with three discs and no way to store it, so I made a simple little box. It could probably use a latch of some sort but this was an early design. I made it from PLA,…
Model je rozměrově shodný s dílky Lego. Navrženo ve FreeCad.
This printable is currently only a 3D project. Use New version .STL !! .stp & Ligh only older version 😊 I'll rework this project in a little more detail this summer with additions for different Oneblades (which will allow for a smaller…
2525 drill guide with inserts for different bits. currently 1/8in and 1/4in Clicks right into place. Can be used with 2550 extrusion by snapping off one side. Let me know if it works for you
This is ongoing project. I will update it as it progress thru possible iterations and extra parts i'll build for this toolhead. FYSETC SB COMBO v2 is an USB/CAN toolboard for stealthburner toolhead. Original stealthburner cable cover were…
The Vivitar 252 is a great compact flash which is popular with film photographers. It has an integrated PC sync cable which makes it easy to use with a variety of cameras. The biggest flaw I have found is that the hot shoe mount is…
Idea was to get a stiffer mounting location for the ADXL acceleration sensor. I was already using the wonderful solid Mosquito mount, so decided to remix it. Main differences: Modified for the Slice 2525 fan Relocated the mounting…
Tiskněte s ručně zvolenou těsnou podpěrou jen spodního vnitřního osazení (horní je v úhlu, nepotřebuje podpěru) Rozlomené hrdlo zakraťte (např. pilkou) až k hraně originálního výřezu. Nechte delší a dobrušujte tak, aby při nasazení…
I was always loosing where I put my electric screwdriver under all of my junk plus the cable was also annoying to keep up with the charger. Having it just lying somewhere while charging was also getting in the way. This holder provides a…
Piece to prevent movement and fall of the fryer. Check that to remove the food tray, it moves, and may fall, with this support it prevents the sliding movement, and it can be moved without any problem by going up.
M4 T-nut for 2525 profil Printed in PETG 100% infill. No supports is required
ORGANIZZATORE GT252 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
This is a tool mount for a Craftsman 183.172521 Rotary Cutting Tool for the MPCNC Primo CNC. It is sized to fit the Universal Tool-Mount Plate for MPCNC ( https://www.thingiverse.com/thing:1697287 ). There are four parts (files) to this…
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
D E U T S C H Halterungen, um die Pro-max Steckdosenleisten aus dem Action (2520461) an einer Tegometall Lochwand zu befestigen. Zwei Versionen, die eine sitzt beim kleineren Lochabstand strammer, ist aber am Ende völlig egal, hält auch…
Wanted an easy way to see the status of the printers in our small farm. All the data is available in our Home Assistant instance via Octoprint, and I had a spare Kindle Fire 7 to use as a display. We manage our farm via an old Mac Mini…
This is a small remix of bed holder bracket to enable usage of Igus RFRM-2525TR10x2 There are two versions with only 0.4mm difference in hole diameter just to be safe. I tested "tight fit" one and works great. Post-Printing Components are…
had some extra 2525 alumnum extrusion
Measurements taken by hand, a tolerance margin to allow for the creation of a case for the PhilipsXPrintables contest & for concrete modeling supports or enclosures (waiting for a working printer and time!) .Step = BowTie Case for hc3510…
This backplate allows for mounting the excellent Sabrent Voltik charger to a pegboard or to sandwich it between any flat surface. I've designed this to mount it to my IKEA SKADIS pegboard. The holes on the SKADIS board have a wider pitch…
Description SABRENT VOLTIK 252W 8-Port Mount This is a custom mounting bracket designed specifically for the SABRENT VOLTIK 252W 8-Port USB Charging Station . I designed it for my homelab rack, but it also works great for wall mounting in…
What it is. A rounded Christmas tree that is placed over an LED tealight. 252 holes of Ø2.2 mm run along six parallel helices across the whole body and read as a densely strung light chain once the light is on. One single part, open at…
Clawd from the Claude Code terminal, turned into a large, flat pixel mascot. The shape follows the default sprite in Claude Code 2.1.161. Pixels are twice as tall as they are wide to reflect terminal character proportions. Dimensions…
Vis de sécurité du coffre / Siège pour accéder à la batterie Security screw for quad trunk Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 15% Filament: Wanhao PLA…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
Cullman 2520 Tripds broken part Category: Other
A monitor stand with a 2mm lip and a hole for storage. Paint supports under the top of the storage hole and use lightning or another adaptive infill. just standard for your printer other than that. Printed on a K2 plus.
The PT2522 is a high Quality speaker chassis at a modest price of around 50 € per piece currently. To preserve maximum flexibility, it however comes without a front plate which is required as a mounting frame. Moreover, when used as…
***Updated V2 can be found on my profile!*** Actually clears the gemfan 2520 props.
The IWISS HD-2612D and similar crimpers have a positioner that screws into the back to hold the contact at a specified depth during the crimp operation. This positioner makes the whole unit too thick to fit in most toolbox drawers.…
I built a spool holder rack from 2525 extrusion, and this lovely spool holder to hang from it. This is one of my favorite accessories. I can move filament from one printer to another. No more digging behind printers to feed or mount…
Slide Holder for Cf-252 Irradiation. Design and model for my PhD work. Slide holder to fit over aluminum puck containing Cf-252 source for surface track implantation. Positioning of the slide is important in order to expose the desired…
This allows fitting a Sabrent 252W USB charger to Skadis pegboard using the backing plate that comes with the charger. Use M4 nuts and counter sunk M4 screws. For the 7mm base use M4x10 screws, and for the 5mm base use M4x8. The pockets…
An extendable slide holder part from a Canon Inkjet printer model PIXMA 2522.
WORTEX ETS 2520 circular machine ruler stop rear The parallel stop on this machine, due to the curved design, tends to be installed parallel to the saw. Because of this, the workpiece is sawn into a wedge. The rear bar is loose and does…
A Treecko pokeball with a clickable button. A key switch from a keyboard is required for a workable button
Small trash can for a child's room or toilet. Can be printed from any material (PLA, ABS, PETG)... You will need 2 M3x12 screws for the lid's rotation axis and 4 sheet metal screws to attach the lid holders. The bucket's handle can be…
3.5* dual-speaker mount, compatible with GRS PT2522C-4 and other style speakers. Built from the ground up in FreeCAD, design is 100% my own (it's very simple - nothing to brag about). It's nothing special, but it may save you some work if…
I designed this enclosure to reuse a spare BTT CB1 module and Pi4B Adapter after upgrading my BTT Manta M8P setup from the CB1 to a Raspberry Pi CM4. The enclosure makes it easy to repurpose existing hardware for useful home-network…
Wall Control compatible mounting solution to adapt the included Sabrent Voltik 252W Charging Station wall mount. Uses 4, M4*8 screws, and 4 M4 nuts.
The iPhone Duo sits too low on the stock Anker 313 Wireless Charger (A2524) . Because of that height mismatch, the charging coils don't line up properly on the stand. This one-piece adapter slips right over the charger's bottom lip to…
An Anthropic logo plaque with rounded corners, a chamfered top edge and a raised mark. The intended colors are an ivory plaque and a black mark. Dimensions Plaque: 252 x 192.98 x 4 mm. Mark: 200 x 140.98 mm, raised 1.6 mm above the…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
This model is compatible with the lego system.
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…