Counting matching models…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
Cover Panel for 5.25 inch optical drive pay on a PC case. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same hook-length for their Drive-Bay covers. Measure the hook positions of the drive-bay…
A Headset / Headphones hook that attaches to the front of your PC tower. It is made to fit as a cover to one of your 5.25in optical-drive bays. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same…
Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases
If used outdoors print with UV resistant filament, such as Prusament ASA.
Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…
Fitting to use 2.5in flex dust hose with standard 2.25in Shop Vac accessories including the Dust Deputy 2.5. I used the Wen hose available from your favorite online retailer. It will be a tight fit on the 2.5in side.
Replaces the CD drive and card reader and holds two 3.25-inch hard drives, but only the 19mm thick ones because, well that's what I needed the file for, and I didn't have enough room to work with 25mm ones anyway. But yeah, this is made…
This is a model to attach dust collection to the 15A Corded Ryobi 7 1/4in Circular Saw (I believe it is Home Depot model CSB144LZK). The original dust adapter 200673002 is no longer sold. This model is not based on that adapter; it was…
Adapter to mount cameras w/ EF-M (EOS M50 in this case) bodies to telescopes that use 1.25" eyepieces for prime focus astrophotography. I'm sure “proper” products exist from telescope suppliers, but what fun would that be. Supports will…
1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports) No Supports required. Used to couple and reduce 1.5" to 1.25" pipes or tubes. 3 Inches of clamp space on each side of the adapter.
2 wall .08 layer Height 15% infill PLA Has no locking screw but could be added. Also, the 1.25 in extension could be made longer as needed. Threaded fine with the metal scope piece. Using a 2.5mm drill, I drilled into the 1.25 section to…
# 5D Tactical Router Jig Pro 1.25in Vacuum Hose Adapter A hose adapter for the 5D Tactical AR-15 Jig to support 1.25in hoses. ## Description Not affiliated or endorsed by 5D Tactical. A hose adapter for vacuum hoses with a greater than…
This is a remix of this model with added ventilation holes for increased airflow. I use it with my HP z440 but it likely could fit similar models like the Z240. https://www.thingiverse.com/thing:4783713 My Tinkercad model:…
Print face down with build plate supports
!!! Disclaimer !!! It came to my attention that HDDs can reach temps up to 60°C (140°F) degrees. The design has no active ventilation, that means you might damage drives due to heat, so be careful, and accept the risk if you decided to…
Replaced one hole with a slot to allow more tolerance on the pins (my wheel didn't come with pins) Models provided: R1 Hole at ø9.8 and slot and ø10 to allow for drilling/sanding to size. R1 Hole at ø10 and slot at ø10 R2 Hole at ø10 and…
I have a heavy black-out curtain and needed to use a stronger rod. Found a 1.25in closet rod at Lowes. No supports Print laying down for strength
Spacing is 34mm, 32mm + 2 mm clearance Gridfinity Dimensions: 1x1x3U 1x2x3U Remix The model was made with OnShape and should be available to all…
5-Drive 3.5" HDD Cage (3x 5.25" Bay) This is a high-density, parametric OpenSCAD model designed to fit 5x 3.5" HDDs into a standard 3x 5.25" drive bay stack. This design is an evolution of the proven 4-drive cage by AnthonyZ71, optimized…
This is a cap with GL45 compatible threads. There is a first hole (2.9mm) to fit 3mm/0.125" OD flexible tubing and a second hole 10mm to allow airflow in/out. A 0.2um filter can be used to cover the 10mm opening to help prevent…
This is a case that fits a Waveshare 6.25inch DSI Display (28918) with a Raspberry Pi footprint device (tested with the Waveshare Mini Base Board (B) and CM5). Top and bottom has openings for cables (however, you will need to modify the…
This is a tool I designed way back in 2018 to aid in cleaning the surface of 5.25inch floppy disks. It's pretty simple to use, just sit the "spindle" in the centre of the holder, lay your floppy disk on top, then place the tool on top…
Description: Top Hat sized for (6.25in) Source 4 LED fixtures. Most effective when the interior is lined with felt tape or flocked to reduce glare. Helps with excess light spillage and glare. I recommend using black or matte black…
A small storage box, with a window. I use it to keep some playing cards in, as well as another for ID/credit/gift cards. I designed this to look like the great example in this Filament Sample box (though mine does not actually use any of…
A simple hinged helmet/headset hanger for utvs or anything with overhead tubes. I included the most common sizes 1.25, 1.5, 1.75 and 2in. I also included the fusion file if you need something different, just update the tube diameter…
As shown, the 50mm X 6mm bore is intended for a potentiometer knob on my printer. It would also work for 6mm rod or threaded rod. It fits well on the splined potentiometer shaft of my Ender 3V2. The 50mm X 5mm bore fits on a stepper…
This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 2.25in inside diameter tool like the Bauer 4 in. x 36 in. Belt and 6 in. Disc Sander. It works printed in PLA vertically with no supports.…
I took cyrulean's design, and separated them into individual files, because reasons. Also made them longer, because having the rollers only 2 squares long sucks to use. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This fits the WEN 6321 belt sander. The light blue is the new 1.25" adapter, the dark blue transparent is the original 2.5" adapter. I designed the 2.5" adapter, but I was asked to make one for a 1.25" hose, so here it is. I put a taper…
Fun frisbee, stable flights. play at the beach, park, or backyard, frisbees provide endless fun and exercise for people of all ages.
This is a V1 so the tolerances may not be perfect, but this should be close to a friction fit on 0.625in/16mm OD barrels. The length by default is 4.125 inches*, but should be easily adjustable in the slicer by duplicating and stacking…
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design: As thin as possible to help in acheiving prime focus. Locking pin hole included to prevent unintentional release (and to prevent…
I like the handwheel but I also like the knurled nut, so I combined them!
2 Different Cams one being a pear and the other an offset circle cam. They have a diameter of 2 inches. Ment for a 0.25 cam shaft. They are 0.25in thick and easily scaleable. They are square holes to make it easier to secure on without…
This is a 4U, 5x5.25in drive bay mount for 10" racks. This model was created to allow for two IcyDock FatCages, one MB153SP-B and one MB155SP-B, to be mounted to a 10" rack, giving you 8 hot swap 3.5"/2.5" HDD/SSD bays. The 5.25" drive…
Nosecone assembly for 4inch inner diameter 4.25inch outer diameter rocket
This Bauer 6 Gallon, 4 Peak HP Wet/Dry Vacuum adapter will allow you to connect your vacuum to a 1.25in outside diameter tool like a chop saw.
Celestron SkyProdigy eyepiece adapter 2.25in to 1.25in. Lower profile than the original in order to allow an eyepiece camera to reach focus. Eyepiece holder section has 2 holes that fit M3 bolts in order to secure eyepieces in place.
This is a 98mm long diffuser for the Maglite D-cell (and most others that have a 57mm/2.25inch head). It fits 18mm over the top of the head (securing a good fit), giving 80mm of diffuser space (see picture). Print in vase mode, as…
. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2mm Infill: 20% **Filament:** Generic PLA probably black Notes: If you orient it on it's face and turn on bridge settings you won't…
Modified for IPS magnets. Fit is tight enough for friction hold. Pictured were pressed in place with a bench press. I haven't tested heat or glue fitment. I suppressed the text in my final model; however, the text is preserved in the…
I quickly modified the version of the Hadley 1-25in ecosystem - NRF - Base by @wigglemore to fit metric M5 screws. As my old Hadley telescope print was based on a version with M5 hardware by @SDHayes M4 was not an option for me as I would…
Wide and designed for pet hair on hardwood. Designed for 1.25in diameter vacuum tubes (see attachments). The bottom is designed to have adhesive brushes or 0.35in weather stripping attached.
Just a little hook I made to hang Christmas stockings from a 1.425" (36.2mm) thick counter top. They hold quite a bit of weight, and can be scaled to any countertop size. Print them with 90% infill. Category: Decor
Here are some 1.25in PVC adaptors that I designed to use on a Cosplay Stand. They are a snug fit. Please feel free to send me any pointers or changes on this design or if you if you think any other type of adaptor would be useful. I added…
Another model I did a simple remix on. Added Labeling for the type of bits I am storing. In this case Vbits and engraving bits
I needed, well more like like my bits to be labeled and more organized. I found this original file for .25 shank router bits that worked with Wall Control. I labeled it for Ball Nose and Round Over bits. Pretty simple remake, but I had to…
Used to adapt the shaft of a 5/16" square shaft to 1.25" PVC pipe. Slides onto the PVC pipe and should be friction fit. If not, add tape or something to make it so.
GREASE RANGE HOOD FILTER 11inch x 11.25inch (actual size) It won't work as an air filter. But great temporary replacement if your filter is super dirty and clogged. Sloped to one side so that grease will run down to one side.
Printing instructions: PLA should be OK, unless you plan on blowing hot air through it Supports shouldn't be needed for the top and cover Supports may be needed for the housing, but it may be printable without. Check your slicer's…
1.25in EMT Conduit Clothes Rack End Cap Use this cap to provide a hanger stop when using a piece of 1-1/4 in EMT conduit as a clothes rack. Snaps over the end of the cap and prevents hangers from sliding off the end. No fasteners needed,…
I converted an old dog kennel that had 1.25" metal tubing into a carport, and made these adapters to connect the wooden runners that the corrugated roofing panels were screwed into. You can use screws or zip ties. I found that zip ties…
Batgirl GTO. The picture does not represent the model.
Apple Watch Mount holder for IKEA like desk of width of approx. 1 1/4". For reference the desk is https://www.ikea.com/u
Designed to support 1.25" EMT conduit, and over engineered to prevent any twisting of the carriage as I'm using this system with a Lowrider 3 CNC by V1Engineering. Notes: The model works with M8 Bolts and 608 2RS Bearings I got the…
I fixed the size inaccuracies with the previous version by shortening the bottom piece by 1.651 mm and making the dove tails 1 mm wider for a better fit. Print with the pegs facing up. No supports.
Thread Size 5-40 Screw Size Decimal Equivalent 0.125" Thread Type UNC Thread Fit Class 3A Length 1/4" Head Diameter 0.205" Height 1/8" Drive Size 3/32"
This 1.25 inch hitch cover has a 104mm diameter circular plate and a 1/2" hole for the pin. No supports are necessary but 100% infill should be used - to ensure the attachment to the circular plate is strong. The STEP file is also…
I liked the 4mm magnetic bit holder a lot, as I don't have to handle tiny magnets and I can make this fit all my hundreds of bits really easily. I have mostly 1/4in bits, so this is sized to allow that. Repeating text from Rob Ludwick:…
Adapter to use Dyson attachments with my 2.25in shop vacuum hose fittings
This spacer could be printed in different materials such as PLA for simple spacers PETG for more durable spacers TPU for the intake or places that need to be flexible It has rounded inner walls so if you have problems with your bed it…
This may fit other Antec case models that use the purple plastic drive rails Print the rail on its side with normal supports. The correct orientation is shown in the pictures STEP file included for easy alteration
![1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports)](https://media.printables.com/media/prints/467707/images/3833779_84360414-c412-4bb7-8416-d7704ab80c4f/f360.png)
