Counting matching models…
Model is inspired by the 310.0134 steam locomotive, which is currently housed at the depot in Turnov. Every summer, my son and I take nostalgic rides on it, and that's how my kid fell in love with this machine. For more info, you can…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
A friend asked me to model a battery plate for his AIWA discman. In case anyone is looking for the same replacement part. Model XP-V310. I recommend printing in a vertical orientation. it will require supports Did you like this project?…
This is a 3D-printable replacement handle for AL-KO clamp bolts (specifically type 643100 ), often found on trailer jockey wheels and other towing accessories. I use it on my Fendt Bianco Caravan. The original part has a cylindrical red…
This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
The MK 160310 is a discontinued splash guard for a series of MK tile saws. I used claude.ai to generate an openscad code to create a very similar one to the original. I printed it in TPU and it works well, despite the stringy bits between…
Wand-/Deckenhalterung für Magcubic HY310 mit seitlichem Einschub für den Beamer. Mit Verschlussmöglichkeit. Gedruckt in petg. Min. 3 walllayers.
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
This holder will hold up to 6 inserts for the JessEm 02310 Rout-R-Lift II. The goal was to a) minimize space taken up on my workbench to and b) to contain these slippery little devils into one corral...! Also needed some side slots to…
PCB, housing and firmware to integrate two Velux KLI 310 remote controls with Home Assistant
Wall mount for Tapo C310 and Tapo C320 cameras. The cable is routed through a conduit with a diameter of 2 cm.
This clamshell style enclosure is custom fit to the Lizusidtsy AD310 450W 3-way passive crossover network, as found on Amazon . It's something I designed for a friend and figured I would share it here. The enclosure bottom has four M4 X…
Dash Mount for Yaesu FTM-310DRASP This is a very simple dash mount that fits reasonably well on my 07 Honda Fit's funky dash. The base pad is dimensioned roughly 2" x 4" to fit a commonly-available pre-cut velcro strip (use the highest…
Die Wandhalterung ist für das Ladegerät der Sonicare von Philips geeignet und bietet Dazu noch Platz für eine Powerbank. Ich habe als Powerbank Vorlage an einer Fresh 'n Rebel 12000 mAh Powerbank orientiert. Auf Anfrage kann ich gerne…
Originally designed as a footrest but came out pretty great for an angled stand as well. I have uploaded the step files as well for anyone interested in designing bigger version or attachments. There are 2 versions included, one with full…
Lightweight tilted holder for Opus BT-C3100 / BT-3100 battery charger. Key features: - Minimal filament usage: main holder ~14 g (at 3 walls/perimeters) + stabilizer ~12 g (optional — needed for better stability; skip it for maximum…
Quickly made for the Parkside tool, maybe fits others, too. Was a bit loose on the tool side so i added a little coating with UV-Resin on the inside. Maybe scale it down to 99,5% or use some tape around the Parkside part.
Fire extinguisher intended for Marine use model WBDL_ABC310VBL. I provide two model, one super tall depending the place who when to fix it. The simplified model to fix on the wall and take it easy. I made it in PETG black. I also made i…
This is a custom 3D printed mount designed for the Dell 4310WX projector , solving a common issue with ceiling installations. In its default configuration, the projector is not designed to tilt in the opposite direction. When mounted on…
Print in PETG with at least 4 perimeters (0.4 mm nozzle). The fit is pretty tight, so you have to gently hammer it in place with a rubber mallet.
Introducing FARCT - a Fan ARC Thingy For Sparkle ARC A310 and A380 (heatsink swap) You'll need to remove the heat sink one time get the stock shroud off - replacing thermal paste is recommended. Your new shroud can be installed and…
This is a minimalist silhouette of the BMW G 310 GS motorcycle I created. It is designed specifically to be printed face down on plate to create a premium appearance for wall decor. Cool idea might be using a patterned plate to achieve…
I made a few small tweaks to jshank's design to the support the Logitech C310 and turned the holder upside down to leave more space under the webcam. This is my first time even using blender to model. Prusa Slicer will complain about the…
This file is the rear I/O panel model file for the GIGABYTE H310M HD3 model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set the…
Meant to replace the full-height bracket I received to fit an SFF PC. My pc is the Dell 5060 SFF Re-Uses the Screws my Perc came with. Major diameter of 2.8mm minor diameter of 2.0mm
This is a simple full-length PCIe bracket for the Dell PowerEdge H310 HBA / RAID controller. I mounted the card to the bracket with two short M3 bolts and nuts, but you can also use an M4 bolt and screw directly into the plastic. With…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
Display stand for Kreg Jig 310 Kit The kit comes with no case or holder so this is a quick print to keep the items together. PLA+ with no special print settings. 10% infill
This model is a detailed 3D printable replica of the classic Chevrolet Truck 3100 on a kit card! The design captures the vintage appeal of the truck, complete with iconic features like rounded fenders, a distinct front grille, and smooth…
A simple stand to mount a Tapo 310 camera to allow it to stand up. Legs stop camera falling over, simple design for quick printing. Stand will wobble when touched, but as the nature of the camera is to set and forget, this shouldn't be an…
Digital Thermometer/Hygrometer holder for PrintClosure . Made specifically for Iso Trade 9310 , but should fit the same footprint Thermometer/Hygrometers. Installation: support beams connections of PrintClosure (replace one M3x16 with…
ORGANIZZATORE GT310 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Base part for the 20-31003-L Blinker for Trailer, i need it to change leds with led cob strips
The original water handle in Saeco coffee machines is always a pain in the neck. It's too fragile and won't last long unfortunately. As mine was broken, I've created the replacement spare part that fits the tank and is much more durable.…
Wall and shelf mounts for the 4G router. Haven't decided yet which mount to use so designed both. Snug fit. Use support for the wall mount angle curve area https://www.tinkercad.com/things/iYDMdMq5kor Print Settings Printer Brand: Prusa…
Prints fine in PLA but most common materials will probably work as long as you manage to avoid warping.
Model is inspired by the 310.0134 steam locomotive, which is currently housed at the depot in Turnov. Every summer, my son and I take nostalgic rides on it, and that's how my kid fell in love with this machine. For more info, you can…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
Custom cover for the Microtik CRS310 to accommodate 120mm computer fan. Printed with PLA or PETG with support on build plate only. (Fan cover model: https://www.printables.com/model/334447-hex-fan-cover-120mm)
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
The model files are not mine. However, I was able to assemble exactly what I wanted by combining files from different projects. For this reason, I wanted to collect and publish it for those who want to make a similar montage. You need: M5…
The propellers broke on this Cessna 310 Model. Unsure of the scale but the propis about 3" in diameter. It can be scaled for your application. Enjoy.
made on 3 pieces to fit with my Prusa MK 3.5 printer. all printed in PETG, as the working temperature is about 50°C. upper layer to be printed 3 times and glued (I use Epoxy 2 parts quick drying) together. a support is required for 1 edge…
Small rubber feet for the JBL PartyBox310 Can be printed in TPU to be similar to the original ones. I have printed them in PLA, also works fine.
Holder for four toothbrushes & two toothpastes Free standing or use double sided tape (15mm) to hang it on wall
Needed a holder for a Tapo T310 Smart Temperature & Humidity Monitor , that would clip onto 16mm tubing. Allowed an opening at the base of the holder so the sensors wouldn't be covered if inserted upside down. Additional credit to fl0cke…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
Will work with Bambu and other large bed printers. Not compatible with Ender3 printers. This is a DIY battery enclosure kit, for the DIY battery building community. I had originally made a kit using 280ah-sized cell for my RV, it worked…
Philips Sonicare 3100 Stand for charger and toothpaste Tested with Model HX3673/14 Diameter toothpaste slot: 33mm
Tired of dealing with the frustrating foot pedal design flaw that causes the flusher valve to snap off? You're not alone. Many Dometic toilet owners have experienced the same problem, especially in cold weather environments or with…
If you use an "EXTECH EX330" multimeter (although this also happens with other brands), you may have noticed that sometimes when storing it, the "NCV" button gets pressed. This causes the batteries to drain. To solve this, you can use…
310.0134: CAB WITH OPENABLE DOORS (print in place) Yo, the driver’s cab now got them working doors that print right in place – no extra assembly needed. They pop right outta the printer, already in the right spot. But yo, after you remove…
It consists of two parts: the adapter for the switch and a 20 cm extension connected by an M5 screw and thread to complement the 19" of the rack.
BMW G310 R Keychain made with four colors, can be modified as desired. 0.16 mm layer height Print without support Infill density 10%
Stand for aku chareger Opus BT-C3100 Stojánek pro nabíječku Opus BT-C3100
Foreword : Do this at your own risk, LiPo's can be spicy : ) Note that this case is designed specifically for 5x18300 cells and the IP5310 charge controller! I hate seeing useful electronics go in the trash so I collected several…
Einsatz für Bandsägetisch BS1310; Gedruck mit PLA (besser PETG)
This model was inspired by @JonEstlander_525017 's Rapoo E6100 Wireless Keyboard protective travel case available here . I designed the model to have a travel case for my Rapoo 9310M keyboard-mouse combo that I carry around with my Steam…
This is a remix of the Opus mount by eddyjay. I am using the T-Clip version from tchoupshop. This version is printable without supports.
Simple base to insert the charger for a Sonicare 3100 and to organize your toothbrush and wire.
I printed this in black prusament PLA. There are two big holes spaced for the media center then two screw holes 120mm center to center, 1.8 mm in diameter. This was perfect for the screws I had on hand and the mounting slots on the back…
I printed this hose adaptor from TPU with a 1.0 Nozzle and .2 layer height. I would recomend printing with whatever nozzle size you are comfortable with. It requires no support and I printed it round end down and would recomend this…
This is still in development, but some people asked about it. Updates will follow as I work towards a final version. This is a refined and optimized version of my previous Ender 5 ModMax design . I was looking to improve three aspects of…
Remix of existing model of Philips Sonicare 3100 Stand but with 2 toothbrush instead of 4
Simple corner infill plates for any Kossel with a 310mm bed and 360mm extrusions on the vertices. Designed for my HE3D K280. My bed is about 1cm above the frame rails, so this matches that level. Underneath there is a large cutout running…
To mount a C310 Camera, you'll need to drill a hole into the camera for an M3 screw, which will secure it to the mount using an inserted M3 nut. I recommend taking off the two screws from the default mount beforehand. This way, you avoid…
I could not find a wall mount that was designed for a Logitech F310 specifically so I made one myself. Wind up the cord and place it in the upwards hook like shown followed by placing the controller in the holder. The cord is then ready…
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
OnShape link https://cad.onshape.com/documents/fe777d1575cef891ca305e72/w/b5b392b5b9760dca0e4465e3/e/3b2138d3dad221bb9173e2bf?renderMode=0&uiState=67a10b58303468093a6ba79a Needs 1x M4 heatset insert, 1x M4 bolt, 3x M3 bolts to mount into…
I have this gamepad for ages and love it. When thumbsticks worn out, I could not find replacement and tried to model one. At first it had too much friction so i adjusted according to Ender v3 SE. I think it can work with f710 and f510 but…
Cover printed with PETG material 0.2 mm layer height with 10-15% infill
This is a replacement raiser foot for wired keyboard Logitech K310. It snaps in place and holds its position either raised or folded in keyboard. Print instructions: Printed with PLA with resolition 0.2. Support are needed under axles.
A friend asked me to model a battery plate for his AIWA discman. In case anyone is looking for the same replacement part. Model XP-V310. I recommend printing in a vertical orientation. it will require supports Did you like this project?…
Includes all full length pieces from original creator. Use the pieces you need. Delete/clone as needed. Added a 7mm round washer/spacer as well to mount the holder level in my configuration. Didn't used the full length spacers but…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
It's a remix of Opus BT-C3100 - 80mm Fan Mod by ShrimpStar with vertical fixation. I use wood screws Ø3.5x16mm. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: IceFilament…
Replacement foot for small compressor. Cotech 40-8310, but will probably also fit other similar compressors. Printed with PETG 0.20mm Brim
This is about .1mm too large but I like to sand down the hinge pins for a snug fit. Specs: Total 4mm x 4mm x 35mm (L x W x H) 4mm x 4mm x 2mm cap 3.2mm x 3.2mm x 33mm shaft Specific model that this pin works for:…
Replacement LEGO Technic Part: 6331026 Are you missing the LEGO Technic part number 6331026 ? You're not alone! I encountered the same issue while building my LEGO Technic set, so I decided to design a 3D printable version of the missing…
Wanted a nice little holder for the et310 circuit tracer with space for the accessories. The whole model is 195x190 so it should fit on most mid sized build plates!
I've dropped our Bosch MK3501M food processor which broke the gear/coupler on the base of the machine so designed a new one. I've printed it with PETG with 100% infill but haven't tested the durability of the part yet. I can imagine that…
This build plate holder is designed to hold 4 pcs of 310mm build plates. Dimensions: Overall Length: 330mm Main body width: 40mm Overall width: 120mm Overall height: 60mm Print settings (I used PETG, but feel free to print with any…
No supports needed, print two caps, two arms and one clutch. You will need a large print bed, but can split the arms if needed. Clutch is hard to put in, but stiff to help keep the caliper in place once you've set the width of what you're…
This design allows the buttons of the Logitech F310 game controller to be swapped into the traditional SNES-style layout. Some non-reversible modifications to the original plastic shell of the controller are needed. Please be aware that…
This is replacement part for Cac Ruris 210/310 or probably for similar weed eaters. The model has built in supports which will be printed with a single wall and can be removed easily with pliers. Printed from Polyterra PLA, 5 wall and 10…
![Steam Locomotive 310.0134 KAFEMLEJNEK [1:25]](https://media.printables.com/media/prints/1027422/images/8320774_bd694e70-dfc0-4cab-af79-6fb56a2fd678_9e80c057-a80a-4c39-b4ab-e23d78a07748/1.jpg)
