120 models
Un chargeur portable puissant et pratique, parfait pour les urgences ou les déplacements. Nous avons utilisé une batterie 18650, choisie pour sa capacité élevée (jusqu'à 3000 mAh) et sa disponibilité. Ce chargeur peut alimenter…
Remix or Yanev's model. I've removed the MicroUSB hole, fixed the screw holes and most importantly, I've removed the big slot to see the charge percent and replaced it with small 1.5mm holes to add a transparent acrylic rod for the LEDs.…
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
This model is compatible with the lego system.
Features: Tested/Printed at 300% scale (See cover picture) Single, Pre-split or Multi-Part Model Options Multiple Button Cross Sizes Use as toy or novelty gift Keychain attachable No supports I made this model 2 years ago for a co-worker…
This is a case for the popular GM328A transistor tester. The case is able to be printed with no supports, and requires Four M3 socket head screws and four M3 square nuts to assemble. The circuit board is captured between the top and…
I needed a decent case for the recent edition of gm328, but did not want to fiddle with screws. Found a good model by machanzar and tweaked it slightly. It should not require any screws now and works with a friction fit. Worst case…
There are many variations of the GM328A component tester, this case is for the “2022 Type-C” model. There are many variations of these boards out there and none of the other cases fit my model or my needs. The files are pre-oriented for…
IP5328P module case This is a remix of 3D printed case for very popular IP5328P power bank module. This module supports 18W of charge/discharge and is capable of delivering 12V at the output. I made a remix to be compatible with the M3…
This case is based to the GM328 "SMD" black board dimension bought on famous chinese site. It is not suitable with the board with standard components, The idea was to print a full case and have the opportunity to use a 9V battery or…
LEGO 76328 Batman the classic series batmobile wall mount to hang with others. Printed on an Elegoo Neptune 4Pro with standard supports and 50% infil. The mount hooks onto the chassis of the vehicle and is more secure that way. There was…
In honour of Pokemon Go's Trapinch Community day (October 12th) I have knocked up a Trapinch one piece and multi-material model Needs supports... Print instructions Category: Creatures
This model is compatible with the lego system.
Full-featured case for GM328A TFT Transistor tester variant and 18650 Li-Ion battery. Charger module is Q3962A with attempt at light conductors for it's indicators (and it actually works). Step-up module is MT3608. Knobs are from some…
Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made. Remix it on Onshape:…
Hardware needed: 8x M3x10mm screws 4x M3 nuts Rocker switch 29x12mm (feel free to remix if using different one, hole in default design is 30x13mm, max depth is 27mm) 9V battery and connector Panel mounted 4MM banana sockets GM328A board…
Jedná se o remix modelu friction fit GM328A case od autora kolba Přidány číslice 1112333 pod měřící objímku, upraven výřez pro displej (je vidět pouze displej), přidáno osazení pro hlavičky šroubků, spodní část zvětšena tak, aby se…
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
I liked the design of the original case, and it fits well, but the lip of the bottom part comes off after disassembling once or twice. So i remixed the case, so that the lid can be screwed in place. In this version you can also mount a…
Gridfinity Klein Tool Screwdriver 32328 Could work with 323xx I think they all follow the same shape
This is a case for the electronic components tester LCR M328 T4. The case has 2 parts, an top and a bottom part that are connected by screws. You wil need to assemble it : 8 pcs. screws M3 x 25 8 pcs. nut M3 I printed it in ABS but I…
The clips of the red side marking lights in all four doors of P80 series Volvos (V70I, S70) tend to break when you try to remove them to change the light bulbs. Sometimes they even break when slamming the door too much. While the lights…
Created for my version of the MG328 tester. Check your size from the pictures. The PCB thickness is 1-1.1mm. Layer size: 0.2 Line Width: 0.4 Infill: 20% It requires four M2x8-12 screws and two pieces of transparent filament to be inserted…
A case for the M328 Transistor Tester with OLED display Included 2 versions - one with text and one without
I've been looking for ages for a vetical wall mount for the Lego 76328: The 1966 Classic TV Series Batmobile. I found the one by @Yvrogne for the 1989 Batmobile, and adjusted it to fit the 1966 Classic TV series batmobile. You will need…
This is a cover for the GUITION JC2432W328C development board. It is a cheap development board that can be programmed with MicroPython, Arduino IDE and ESP-IDF. 3mm screws are required for assembly.
Enclosure / box for GM328 transistor tester. Including places for 18650 dual batteries, USB microB charging module with BMS, step-up module and 1S battery indicator module. Extra parts required: 2x 15x10mm rocker switch 7x M3 bolts L20mm…
Remix of michal00ss powerbank case to fit only 2 cells instead of 5. Everything else is the same.
The original model by ressu can be downloaded here . Changes from the original: Redesigned the wall near the lever. The original model has a strange dust-gathering hole there. If you measure SMD components, a tiny thing can jump inside…
Do pobrania mój projekt obudowy i zasilania do Analizatora/Miernika GM328A. Do zasilania wykorzystane ogniwo 18650, lista części: Miernik GM328A https://alii.pub/6vtt92 Konwerter J5019 DC DC Step Up i ładowarka Li-ion Wskaźnik baterii 1s…
Brake lights stuck on? probably this rubber spacer that's turned brittle and broke, without it the foot switch doesn't close all the way and the brake lights stay on, drained my battery overnight on my 2008 Kia Sedona. replaces part #…
An enclosure/battery holder for the GM328 transistor tester. The box has a simple hinge that holds the battery in place under the tester, while leaving the board surface perfectly flush on the enclosure's rounded edge. This leaves all the…
https://www.thingiverse.com/thing:4441076 presented a gardena tool. No supports needed. Tested print on resin printer. should also work on PLA... Print Settings Rafts: Yes Supports: Yes Resolution: 200 Infill: 20 Filament: Elegoo Resin…
🔋 IP5328P-Based Power Bank – Compact and Powerful Fast Charging Module Designed for DIY projects or standalone builds, this IP5328P-powered module supports a wide range of fast charging protocols , including: ⚡ QC3.0 , FCP , AFC , MTK PE…
This is a remix of https://www.thingiverse.com/thing:2775688 I wanted to be able to access the battery with one screw. I also wanted the device to be at an angle but not too steep so the test components don't fall out while working with…
Составной корпус Платы разработки Arduino (UNO R3 Atmega328p), состоящий из корпуса, крышки и крепления под рейку
This is a sleek 2D 3D-printable model of the iconic BMW F30 328i viewed slightly from the side. Perfect for fans of the F30 generation, this design can be used as a stylish keychain, a wall decoration, or a unique gift for BMW lovers. The…
This part can used as replacement for Weber 43286 --> Latch for grill attachment
This case is for the ROC-RK3328-CC (Renegade) to turn it into a mini desktop PC. This case was edited from Michael Klements' amazing "DIY Raspberry Pi 4 Desktop Case With OLED Stats Display" design:…
Printed in PLA with 0.2mm layers, 4 walls (alternate extra wall) and 50% infill. Designed to grab the beams under the car, so it cant tip from the mount.
Decorative stand for showing off the Batmobile! Can be mounted vertically or horizontally on a wall. Or can be set up on a desk. Mount firmly holds the model in place while adding a scenic look to the background.
A simple thing to tidy and help secure the CF IDE adapter under the TF328 (if that's where you want to place it). Prints in about 6-12 mins depending on your printer and settings. 0.2mm layer height works well with 100 percent infill.…
This case is more or less a set of replacement parts for the most common acrylic case sold for housing the DIY GM328 component tester. While it includes replacement parts for all the acrylic parts of the original case, with exception to…
A work in progress back cover for the Amiga CD32 TF328 Kipper2k v6 Exp adapter. It works as it is now, but needs more attention to really make it perfect. Print instructions Can be printed in any resolution really, but 0.2 seems like a…
For users who got the BenQ EW3280U monitor, and, a Chinese Wisecoco 14 Inch 3840x1100 4K monitor, this Fixer is the must-have, definitely. This monitor leg with VESA mount can mount the Chinese Wisecoco 14 Inch 3840x1100 4K monitor (only…
Description Started this design back when there were no proper cases for the newer GM328A USB-C version here or anywhere else. Uploaded it here along with the FreeCAD source in case anybody else needs it. Printing and Assembly Can be…
There is so much different version of this transistor tester that I didn't find a case for it ... So in the pure DIY spirit I made my own. I hope it will suit someone else's one. This is a case for the DIY Transistor tester GM328. You can…
A custom 9V battery enclosure designed for the GM328A Type-C LCR-T tester.
I had a transistor/capacitor tester sitting in a drawer for a couple of years, always meant to make a case. I finally did, and knocked it off the desk, breaking it just before putting it in said case. :-( I've since ordered a new one but…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
Arduino-Programmierstation-Atmega328-Attiny85 Arduino Programmierstation Atmega328 & Attiny85 Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Arduino_Programmierstation_Atmega328_Attiny85_442d283b.html Und…
The Dornier 328JET is a regional jet aircraft developed by Fairchild Dornier, based on the turboprop-powered Dornier 328. Introduced in the late 1990s, the 328JET is designed for short to medium-haul flights and features a twin-engine…
The tester case is modeled for use with a 6F22 battery. There is an LED on the board for which a light guide is made, which is recommended to be printed from a translucent material.
Full description and build instructions available on https://github.com/Devnol/Juicebox
Update 1st April 2020: New design using two parts for easier assembly This adapter allows you to flash a ATMega MCU chip based on the TQFP-32 case (like ATMega168 or ATMega328) directly while being soldered to the board. The necessary…
This object is a case for the GM328A Electronic Components Tester. It has a compartment for the 9V battery and an access hole for the extra test leads. The thin plate on the battery cover should be placed between the Component Tester and…
This is a low profile tilting stand for the inexpensive transistor tester, generally referred to as LCR-T4, M-Tester, Mega328, and perhaps a few other names. This stand is designed to work with the most popular acrylic cases for this…
This model is based on the BMW E36 328i 3-series
This ia a box for the GM328A Component Tester. It is possible to use a 9V block battery or external power via connector. The Zero-Force-Socket must be put onto two extensions to fit into the front plate. The backblane must be made out…
Another, more durable version of an IP5328P powerbank housing. Material: Transparent filament can be pushed through the holes in the housing to act as light tunnels for the IP5328P-LEDs. Use 8x M3 10-12 mm countersunk head screws to close…
This design features a custom casing for the Mega328 LCR tester, typically powered by a 9V block battery. To enhance convenience and sustainability, I have redesigned the power supply to use rechargeable 18650 cells instead. The project…
A remix of the remix with improved lettering and optional model type and warning labels. The lettering in the remix this is based on was slightly too small to print well using a 0.4 mm nozzle. This redesign uses larger letters and a…
A box to protect the exposed components on the GM328A electronic component tester. The lid is a press-fit, very tight, but this is the sort of enclosure that you really won't need to open often, should be set-and-forget once the lid is…
I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not…
This is a case for the Sainsmart Huhushop Mega328 Tester/Meter. This case also contains a battery compartment and sliding panel for access to change the battery. The tester itself will automatically determine the component attached to it…
Fiat part : 182063280 Compatible with : Fiat Uno, Fiat Fiorino, Fiat Premio, Fiat Elba, Fiat Duna Important : Print horizontally, as per the stl file for better strength.
The low side of my car's AC is buried and I couldn't get my hand in there to tighten it well. I figured with a special wrench, a socket extension, and a wrench I can 1) avoid mangling it with pliers, and 2) get a good feel for how much…
A basic bracket designed to hold Centralite Micro Motion Sensor [Model 3328-G] to the wall. The motion sensor snaps in an out pretty easily for installing or battery changes but is held quite secure otherwise.
Made for this unit: https://s.click.aliexpress.com/e/_c3UEMT8x This custom 3D printed enclosure is designed for the LCD GM328A Component Tester . It provides a precise fit for the device while protecting the LCD screen, ZIF socket, rotary…
Heute präsentiere ich hier mein erstes Model. Es handelt sich um ein im Maß einstellbarer Adapter für die Laderaumhalterung des Opel Insignia. Gedruckt ist das Ganze aus rTitan, wobei gutes ABS / ASA dafür auch reichen sollte. Bei einer…
Box for GM328 Component Transistor Tester. Modified to use Rotary Encoder and default component socket. Two versions of top cover one with rounded corners (Fillets) and one without. remix of http://www.thingiverse.com/thing:1277163 Print…
This is a low profile tilting stand for the GM328 electronic component tester, designed to work with the most commonly used acrylic case. Included is a replacement part for the acrylic bottom plate and a copy of the stand I originally…
wanted a simple powerbank case so I made one with a 3.7v 10000mah battery from a broken powerbank BOM Similar battery to the one I use x1 IP5328P Board x1 M3x20 screws x4 M3x6 screws x2 Double sided tape a little bit
This part can used as replacement for Weber 43286 --> Holder for screen
Used to hold an ESP8266 and DHT thermal sensor to the top of a Tukkari mini enclosure. Attaches to the fan screw without any need to change the screw. The ESP8266 is NOT held down and is in place only by the top of the enclosure (I didn't…
ORGANIZZATORE GT328 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
basic Clamp for TS 80/328 Guidscope 85 MM
Dishwasher Door Handle – Hotpoint Ariston LST328 Replacement This model was designed as a replacement for a broken original door handle in the Hotpoint Ariston LST328 dishwasher. The stock part is prone to cracking, so this version aims…
This is Gluepad for the Harken 3288 Compsite Eyestraps. I designed this so dont have to drill holes in my boat. The component is not designed to carry even remotely any load. It is certainly enough to attach a cord to it and hang up the…
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
An Libre Renegade 3328-CC case. Parts: Libre Computer Renegade 3328-CC Hardware: 4 - M2.5 ~4mm heat set inserts 4 - M2.5 ~4mm screws 7 - 5x3mm magnets Print Notes: PETG / ABS / ASA / PLA
I would appreciate any donation. https://www.paypal.me/JanSkvor
This case is more or less a set of replacement parts for the most common acrylic case sold for housing the DIY GM328 component tester. While it includes replacement parts for all the acrylic parts of the original case, with exception to…
An enclosure for the GM328 transistor tester, pcb just closing the box, so the components, are in plain sight, no cover. used some battery from powerbank, tp4056 for charging, MT3608 DC-DC module and 10x15 switch. + stands and screws from…
This is to replace a Snapper mower speed lever anchor part number 7032830YP. The biggest functional difference between the actual part and this part is that the mounting hole is circular instead of square. My mower didn't have the square…
This is a non-functional visualization dummy modeled after the general dimensions of an MSM-328-style reed switch actuator.
I made a case for a Volvo AUX CD Changer Emulator. The code can be found here: https://github.com/Perpetuum96/Volvo-AUX-Melbus-LGT8F328P
Inspired by raspberry pi din rail holder https://www.printables.com/model/472867-raspberry-pi-din-rail-mount , with M3 bolt to secure it
DeLonghi 5313282411 pulp container coffee maker replacement part Petg
Remix of Case for Libre Computer Board ROC-RK3328-CC (Renegade) by Viktor von Due (thanks, Viktor!). I really liked this case but wanted these changes: Closed the GPIO section of the lid Adjusted for the use of M3*8mm inserts by raising…
Divider plate for 2 (or more) gang Calon A328 boxes, used when mixing high and low voltage and using ENT (smurf tube.)
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Cet engrenage est un composant de la voiture radiocommandée Inferno 4wd Kyosho ou No. 3281 des éditions de 1991 à 1995. Sur la notice fournie avec la voiture, cette pièce est la BS-56. Cet engrenage est composé de 53 dents pointues, de…
I made a case for a Volvo AUX CD Changer Emulator. The code can be found here: https://github.com/Perpetuum96/Volvo-AUX-Melbus-LGT8F328P
A remix of the remix with improved lettering and optional model type and warning labels. The lettering in the remix this is based on was slightly too small to print well using a 0.4 mm nozzle. This redesign uses larger letters and a…
I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not…
![Centralite Micro Motion Sensor Wall Bracket [Model 3328-G]](https://media.printables.com/media/prints/306635/images/2670583_91fb4546-eaec-4edb-9955-d14b8bc92025/20221030_204405.jpg)
