Counting matching models…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
An angled wall mount to allow you to mount the Lego UCS Gunship (75309). This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so…
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale Hope you will love it as much as i do :D
Der Wandhalter dient zum aufhängen einer FRITZ!Box 7530 AX. Am Rahmen sind kleine Laschen, mit denen man die Kabel mithilfe eines Kabelbinders aufhängen kann.
This model is compatible with the lego system.
Support to put the AVM FRITZ!box 7530 and 7530 AX in a vertical position. You need to print 2 pieces. I also uploaded the .STEP file of someone wants to make some modifications. PS: from the comments, it also works for the 7230 and 5530…
This model is compatible with the lego system.
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Find BOM and PCB…
Printing work with supports use a lot of cooling!
This is my version of the QIDI Plus 4 print Rear Cover. During stock cooling, the temperature of the drivers exceeded 100 degrees. When installing a 120 mm fan, the temperature was kept at 65-70 degrees. Installing the 7530 fan in this…
I wanted to get my laptops out of the way (usually piling up on a table somewhere) and so created some fall mount brackets. I needed them to be sturdy, low profile, but also to allow charging when ‘docked’. Print settings: PETG 0.4mm…
Motorcycle Chain Lube Tool (525/530) Tool for lubrication of a 525/530 motorcycle chain. Print text down, no supports required. Use a releasable zip-tie through the channel to secure the tool to the aerosol. Cut the straw to length, so it…
I have an Ego 530 blower and wanted a more directed airflow. I found this model but wanted a more focused, so I merge it with the models https://www.printables.com/model/33596-ego-leaf-blower-nozzle-attachment and…
This model is compatible with the lego system.
I could not find a wall mount for my Ego 530 leaf blower, so I decided to make one myself. Nothing fancy. I'm really new to this, so don't expect too much. The pictures I've attached actually show my draft version which had the holes…
I saw other similar ones but this one is less likely to break than those.
Mounting solution for the FRITZ!Box 7530 with additional space for cable management solutions.
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
10" inch Mount for your FritzBox 7530 AX in a 10 inch network cabinet. Nozzle: 0.6 mm Print Settings Printer: UT5050 Rafts: Yes Supports: No Resolution: 0.4 Infill: 12 Filament: M4P PLA natur PLA natur Category: Other
2 different models for the BMW E39 M5 530I 528I 540I recomended to print in PETG because it can get really hot.
Developing 8 sheets of 4x5 film at a time. Print with PETCF for best performance. PLA is too crunchy PLA+/PETG/ABS are too soft ABS-CF should also work. Category: Camera
Beim LMC Vivo 530 K habe ich das Problem, dass die hintere Umrissleuchte im weg ist, wenn man die Dachstangen der Wigo abstützen möchte. Ich habe das Teil in PETG mit 25% Infill als Gyroid gedruckt. Das sollte ausreichen, muss aber jeder…
Since they are constantly getting lost and the children are sad, I have constructed two replacement arrows. They are compatible with the Lego Projectile Launcher (part number 15301) and fit into the rear handle end of a "Simba - Next…
This model is compatible with the lego system.
This is a 3D printable vertical stand designed for the FRITZ!Box 7530 and 7530 AX routers. It allows you to place the router vertically on either side , depending on your setup needs, improving both space efficiency and ventilation. ✅…
A bit prettier variant of the original + version for M4 heat insert nuts Depending of the version use M3x35 self-tapping screws or M4x35 machine screws.
Could not find a mount for the MX5300 Wifi 6 so I modeled up my own. I just added a corner mount for the mesh routers too. I did use supports on this mount for the long overhang. Print instructions I printed without supports and it works.…
An adapter to fit the Garmin edge 530 to the blendr double stem gopro mount.
Mount for 7530 fan for EVA 3 You will need 2 M4 heated inserts for the bracket. Airduct must be printed with support. Work in progress, may need some tweaks.
Support pour positionner un Dell Latitude 5300 verticalement sur une station d'accueil Dell WD19 ou WD19TB. Fonctionne aussi avec les Latitude 5400, 5401, 5410 (tous ceux de 21 mm d'épaisseur). Print instructions Impression en PLA, à…
End caps for 80/20 Inc's 1530 (1.5" x 3.0") t-slot extrusion. Push fit into place when printed with ABS. Three options: with holes for 1/4" flat head screws, solid, and with holes for routing cable in t-slot. Print Settings Rafts: Doesn't…
This Equipment Wall Hanger Mount was modeled in FreeCAD using a parametric approach. Users can manipulate the model to suit their individual needs through the manipulation of the “parameters” spreadsheet within the FreeCAD model. The STL…
Habe eine einfache Wand / unterm Tischhalterung für eine FritzBox 5530 (Fiber)/7530 AX gebaut. Sie wird einfach nur mit 4 schrauben befestigt. Es gibt keine besonderen Druckeinstellung. Drucker : Prusa MK4s Filament : Prusa Galaxy Balck…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: GT-AX11000 RT-AC5300 GT-AC5300 Here you find only the Wall Mount Screw Template, just for testing. The Wall Mount Plate do you find here:…
Cooling Base for your AVM FRITZ!Box 7530 (AX) Got a spare PC case fan you aren't using? Print this cooling base for your router! Two variants for use with 120mm and 140mm case fans available. Print the optional standoff feet, when using…
This is an upgrade from my old caliper case design. It works and it prints in one piece if you own an MK3 All you need is : 2 neodymium magnets 3x8mm 2 screws for the hinges (I used 2 headless allen screws) I've done some modifications on…
This model is compatible with the lego system.
This is a speaker stand I designed for Logitech X530, but works with X230 and X210 as well. It is based on the original stand and works flawlessly. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Die Begrenzungsleuchte stört sich mit den Wigo Stützen. Meistens ist die Stütze genau da, wo die Lampe ist. Deswegen habe ich diese Halterung gemacht. Sie passt sehr gut über die Lampe und folgt der Kontur des Wohnwagens. Material = PETG…
Ständer für die Fritzbox 5530 leicht zu drucken
From the official website: 1530 is a 1.50” x 3.00” fractional 15 series rectangular T-slot profile with six open T-slots, two on each 3.00” face and one on each 1.50” face. The profile has align-a-grooves to assist in alignment when…
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
I needed a power bank case for my salvaged 18650 batteries. The module I used is in the link below. 5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,…
Sep 02, 2021 This is a mounting plate / wall bracket for the Fritzbox 7360, 7430 and identical models with a mounting hole spacing of ~178mm. After fixing the mounting plate to the wall, the Fritzbox can simply be hooked in. The side…
I will print it soon, by the way it needs : 2 M3 worm bolts around 1cm 2 neodymium magnets 8mm diameter with 3mm thickness. The new version is better because it prints in two parts without supports and doesn't need any glueing like the…
Case for Mitutoyo N15 530-101.
This is a no cut mod support for a 0530B solenoid model to fit in a Namco GunCon 45 made to be compatible with Gun4IR official PCBs. The model is composed of two parts that are glued together on their flat surface for printing without…
Stand uses ABS and Foot uses TPU. If you don't want to print the feet separately, don't remove the supports.
A project inspired by this forum topic , it allows you to use a standard USB power source with a Garmin Flush Out-front mount, Triathlon mount and probably also mounts from other brands that are compatible with the Garmin Flush Out-front…
This is my Fritzbox 5530 Wallmount with a little dust shield. In addition you need two M4 inserts and two M4*12 screws (maybe some Loctite).
Replacement gears for the coffee group of my Beko machine, printed in PETG with 80% infill last about 3 months, but in PC Blend, printed with my MK3S, they last 6 months and it still work. Make sure to thicken the walls, use a good…
Why don't use Olimex ESP32 in ESPHome bluetooth proxy for Home Assistant also as a router? In one case? Grab your spare CC2530, flash router firmware, print the case and connect Vcc and GND to Oli ESP32 PoE board. Insert into case not…
A 6x2 Gridfinity box for the Mitutoyo MIT530-104 Vernier Caliper.
This is a bracket for the JF-0530B solenoid. Which you can buy here, for example: Link to Aliexpress The holes in the bracket are designed for M3 screws. Print instructions 0.4mm nozzle 0.2mm layer height 20% infill use brim PETG is a…
Фильтр для 3D принтера Flashforge AD5M печать выполнена PETG (заполнение корпуса и крышки 18-23% ) 4 периметра , 4 слоя крышки, 4 слоя дно вентиляторы 7530 12v х 2 шт 7 шт потай самореза 2.5мм х 10-20мм корпус на магнитах 5х5 6 шт к…
Shaped to hold a Nikon D5300 camera. Fits other D5X00 series cameras as well probably.
This is a 10 inch mount that fits a fritz!box 7530, fritz!box 7530 AX and most likely the fritz!box 7520, too. The tested 7530 and 7530 AX used the newer fritzbox design. Their original casing dimensions are 20.5 × 15 × 4.5 [cm] (L×W×H),…
The original button broke. Replacement cost is prohibitive (30$ on Amazon !!!). Category: Replacement Parts
I recommend using tree support for the TMP36 holder bridge so the support is not really affecting the TMP36 sensor slot. Insert the TMP36 sensor from the inside by passing the legs through the opening before installing the solenoid
This is a no cut mod support for a 0530 solenoid (without the rod) model to fit in a Namco GunCon 2 made to be compatible with Gun4IR official PCBs. Solenoid model 0530 comes in different varieties 0530, 0530B, 0530T. The two with the B…
Print the main bracket strong. Other than that, have fun and choose a nice color!
Wand-/ Halterung für Fritzbx 7530. Habe die Halterung mittels doppelseitigen Klebeband an einer Komode befestigt und die Box eingehängt. Hält sehr gut. Wall bracket for Fritzbx 7530. I attached the bracket to a chest of drawers using…
Display stand for lego set. Angled sideways and down. Needs support when printing. Install by removing bottom grey plate. squish onto stand then mount X-wing
The design is meant to be used with M6 screws from the rack. It was originally printed in PLA, which turned out to be stronger than the original material. Update : The PLA did not withstand the stress, and I encountered difficulties…
Commentaires Je suis parti de la cage fictive servant de cache quand il n'y a pas de disque dur dans les emplacements du serveur. Ceux-ci ne pouvant accepter aucun disque, j'ai adapté la forme pour des disques en 3,5". Ce modèle vous fera…
Simple end caps for 15 Series t-slot extrusion for 1515 and 1530 profiles. Easy to pop in either threaded or unthreaded ends. The pegs do break when you remove them as expected, but they're tight so they dont rattle from vibration on a…
An original design by ‘Zurlingo-3D’ Please post any design ideas or updates in the comments below. This is a fully functional 7530 fan duct, open to feedback and design improvements from the community. This started as an idea of ‘Can you…
Simple keychain for E39 diesel lovers Printed with ender3 on OrcaSlicer
Stylish, swivel-mounted solution for wall-mounting the Logitech X-530 speaker system.
Printed in PLA I painted the backdrop of my logo silver. Print back down with supports to allow for the logo to have good quality. Place a 2x4 brick into the model when finished printing to connect to tie fighter.
Sometimes you want to use you're strap. Some times you don't. Therefore I created the DSLR Strap clamp! Please note I have made the strap clamp originally for the Eos100d/Rebel SL1 other straps maybe to wide or to narrow. These files are…
Our metal (cast zinc?) strike broke so I modeled this from scratch and printed it while we waited for a replacement. Worked well enough that we could do a couple loads of laundry - printed part seems like it actually holds up pretty well,…
This model is compatible with the lego system.
Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html Use 3x M2.5x4mm screw directly on motor rotating cage. Print D35XX pulley, Remove integrated support. (red…
Motor pinion and drive pulley for 3DSets Buggy with a FlashHobby D3530 1400KV Brushless Outrunner Motor. The drive pinion is hollow to slide over the motor shaft. Use a hobby knife to clear the thin cover over the hole for the motor…
I made this in two components, because it would be hard to print otherwise. The “bridge” is just to make it mountable a bit away from the wall, you don't need to print that part if you want to screw it straight on the wall. It was…
Replacement Hooks for the Playmobil pirates (71530) Ships Sails. The Non-foldable is for the Top Part of the Sail. The Foldable is for the Bottom Part of the Sail. The Foldable one is a bit finnicky, but once in place, it should work…
CPAP adapter for 7530 radial fan
A colleague broke one of the knobs on his microwave, designed this one as a replacement in Onshape. Can be printed with AMS it you want to have a black arrow at the top, however should be easy to color using a sharpie. Designed for the…
Update: I eventually ended up buying an aftermarket spare for better durability. Spool cover for Einhell GC-ET 4530. Recommended to print with 100% infill due to high centrifugal forces. Printed with support under the latch overhangs.…
I wanted a wall mount that keeps the router a little further away from the wall surface, to help with signal reflection and obstruction as much as possible. I used random #8 wood screws that I had on hand. One screw is likely enough to…
Chain oiling fixture for 530 motorcycle chains.
3 hole adapter for surpass 3530_V2 engine for 3DSETS SAKURA 240
Rugged protective case, remixed by me for the Garmin Edge 530/540 and compatible models.
Longer (+3mm from the original) version for additional spring contact plates. Improved battery mount contacts: example or ozon ip5306: aliexpress or ozon battery: ozon
I wanted better cooling, so I bought this 75 x 30mm blower fan and after some other adapters didn't work for me, I modeled my own. This one doesn't rotate the fan. I used the mirrored version.
Since Blum does not provide replacement parts and I needed the roller to fix my drawer I modeled it. The rollers need a little “gentle persuasion” to fit, but overall it rolls very smooth. The felxture even clicks into place like the…
I wanted to hang my Satellite Surround Speakers in my Workshop. But I wanted them horizontal and mostly centre pointed facing in the room. The original feet did only provide as standing or vertical. So I designed some new feet with the…
Maybe you need a longer screw because I have not included the hexagon to make it more stable.
The Jobo 1500 series tank system does not officially support processing 4x5 sheet film. This insert fits 2 sheets and requires atleast 3 35mm film spools of vertical space. So you need the 1530 tank module to fit it. It prints in two part…
Adjusted motor mount and drive pulley for the Avian 3530 Brushless Motor. These has a wider pattern vs. the stock parts.
I wanted to avoid making a hole in the wall, and my router had a curve and I couldn't use the double-sided tape directly on the underside. I made this to hang the router and then stick it to the wall without making a hole. Works great for…
It's not stackable, but very easy to pick up the caliper. Dimension is 1x6
About This gridfinity holder is designed for a Garmin Edge 530. Print instructions Based on one print run: PLA, 0.2 mm, no support.
I needed a dryer for my cpap hose for my Löwenstein CPAP, and copied an existing design i liked, utilizing a 7530 USB-fan from amazon. Link: https://www.amazon.de/-/en/75mm-Blower/dp/B0CMQND5ST?th=1 The thing takes about 30 minutes to dry…
It's designed to be fitted to the stem cap, distance between holes is 28mm. It needs 2 spacers between the cap and support and 2 10mm long spacers for fitting it, outer diameter of the 2 spacers is 8mm. When fitting it please make sure…
English: This is a mounting plate for FritzBox 7530AX with hole distance of 154 mm. Use with double sided tape, 50 mm wide. The inverted studs print without support. Let me know if you need another hole distance! Print instructions: use…
