Counting matching models…
UPDATE!!! (July 2024) I am currently working on a new recceiverbox which will fit the 2024-car. As the layout in the car changed (shorter chassis and some modified parts), this receiver-box does not fit anymore. ************************ I…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
This is a 10" rack mount for a Netgear ProSafe GS108Ev3 network switch. This model assumes you have the 4 round stock rubber feet under the switch. Printed in PLA with a 0.4mm nozzle using 0.2mm SPEED preset with adaptive cubic infill.…
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…
This hood is SIMILAR to the EW-78E. Please note that I did a remix of a lens hood that I found online. I only resized the inner circle to match the diameter of the 15-85mm lens of canon. I still had to do a little bit of sanding here and…
The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…
About model My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012). Size: 25x20x17mm Compatibility VW carmakers brands Modifications I optimised original VW design like so: Clamp has better…
Here is the Audi A4 B6 in silhouette Suitable as a wall or window decoration
i recomand to in PETG or ABS with minimum 25% Infill
Xiaomi 14T Pro Case and Phone (2407FPN8EG) (Fusion360)
Über den Parameter “Spalt” kann der Freiraum für den Switch verändert werden. In der ersten Veröffentlichten Version stand er auf 0,2 mm, jetzt ist er 0,5 mm und liefert etwas mehr Freiraum.
F/A-18E/F Super Hornet entered fleet service in 1999, as the replacement for the F-14 Tomcat. The Super Hornet is the second major model upgrade since the inception of the F/A-18 aircraft program highly capable across the full mission…
My wife needed a holder for her Bosch PKP 18E glue gun for IKEA Skadis pegboard. I took inspiration from Pontus , however designed from scratch. Redesigned it so it holds also 2 glue sticks (11 mm sized) as there was just a convenient…
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
A simple vertical monitor mount / stand for Samsung U28E59D 28" 4K monitor. Perfect monitor orientation for programming or working with long excel sheets. Just slide the monitor vertically into the stand, no screws needed. Large printer…
UPDATE 27th oct. '24 Toms Puķītis asked me to make a version without the TP-mounting. UPDATE 13th Oct '24: (v3.9) slightly higher box, three mm more height on the inside. UPDATE: aug, 27th '24 After testing, multiple updates, many…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
Hornet from: http://logic-wizard.art.coocan.jp/fms_e.htm Remixed Superhornet Hint: Scale it to 0.66 if you like (in your Slicer) to cut down your printtime (not less) https://en.wikipedia.org/wiki/Boeing_F/A-18E/F_Super_Hornet source for…
Printed in a single part on a big printer, or in two parts to fit the build area on a Prusa MK3. Attach the spikes with screws into the orignal wheels to improve the climbing performance on grass with the mower. You need to do some…
Edited & removed second screw to have more empty space. Now fits Sanwa RX482 better. MyLaps Transponder fits as well. Includes soft cable glands too (Must print with soft TPU)
Steps to install whole setup into the Lenovo M720Q Minipc: Print this model with a sturdy material like PETG Take off side/top cover of minipc (screw on the back and slide towards front IO) Take out 2.5" drive holder by pressing down the…
Mounts a Delta BFB04512HHA-DV52 45x10mm blower fan to the heatsink of an LSI SAS9300-8e card. Will work with other BFB04512 variants, but the BFB04512HHA-DV52 is the one you want if you care about PWM control. Requires two M3x10 hex…
I wanted to have a bit more space to mount electronics in my Xray XB8E 2022 buggy. I designed this battery tray which can be mounted with longer M4 bolts. The battery of “shorty”-size is held tight in place in a centre position, so not to…
3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.
IMHO best to print these (you need two) out of PETG as this is less brittle then PLA
My 9200-8e was getting a little hot, and I couldn't find any fan adapter's for its tiny heatsink. I decided to make my own to fit these 40mm fans I already had, available here from Amazon: MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt…
A simple mini rack slot in for TL-SG108E TP Link switch
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
Rack mount ears for Netgear GS108E switch. Remember to hold switch while pluging cables to prevent it from moving to the back. I've added a hole on each ear for the switch feets. Inspired by: https://www.thingiverse.com/thing:249851 Print…
Diese Ausstecher in Form einer stilisierten Sonne wurden so gestaltet, dass die Gebäckstücke leicht ausgestochen und ohne Probleme den Teig entnommen werden können. Sie gibt es in verschiedenen Größen. Die Ausstecher sind leicht zu…
An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…
---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…
Nur noch festschrauben und einbauen zum verlängern von Hohlwanddosen in die tiefe ! Nicht nur nach vorne sondern tief. Hiermit wird eine Steckdose oder Schalter oder unterputz Deckel gehalten ohne gips oder was auch immer zu verwenden !
Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
Prostě klipy na vymezení vůle na upperplatu. tisknu z PETG
This is a PCIe Bracket for mounting an LSI SAS 9300-8e in a Full Height PCIe slot. I found it worked really well printing it with the little notch required for the SAS connector facing up an using supports under the bracket and inside of…
Крепления фар Audi A4 B7 8E0998122B
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
collection https://www.printables.com/@yahbluez/collections/518691 Needed an under shelf mount for this small switch… …used FreeCAD to make one. (Feel free to use the included CAD file to make and sell your own. licence: GPL v3) Picture…
The original file works/fits great but I wanted the face plates to match the Dell OptiPlex file from @TimPrints_686384
Unleash the thrill of modern naval aviation with this 1:265 scale model of the F/A-18E Super Hornet! Known for its advanced avionics, precision strike capabilities, and versatility as a carrier-based fighter, this model of the F/A-18E…
Printing height 0.2 mm with nozzle 0.4 mm
I had issues with the LSI 9200-8e card that I bought, so I ended up buying a new LSI 9300-8e. I modified the original design to accommodate for the different SAS connectors
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS308EPP This bracket is designed specifically for the Netgear GS308EPP switch, offering a clean and secure fit in your 10-inch rack setup.…
A custom-designed wall or desk mount holder for the TP-LINK TL-SG108E 8-Port Gigabit Switch. This holder securely fits the device, ensuring stable placement and easy access to ports and LEDs. Ideal for organizing your networking setup at…
OpenIPC Thinker mount frame for 88EU2 wifi card
Náhradní upperplate pro XB8E. tisk z PC výplň tak 40%
Didn't find a case that I liked for the XY5005E/XY5008E type of power supply, so I made one. You will need: a panel mount DC barrel jack (5.5x2.1 mm kind) 1x XL601 switch (the very common black one) 1x XT60E-M connector 1x XT60E-F…
prints with no supports.
This is an adaptor shroud to fit widely available 4010 blower fans to an LSI 9200-8e SAS HBA. It is built to be as low-profile as possible to fit inside a lenovo tiny 720q, and only requires 2x m2x10mm self tapping screws. I would…
benötigte Schrauben: -8x Senkkopf M3x10 -4x Linsen M2x14 -2x Linsen M2x16 -1x Linsen M2x6
voici mon support mural pour talion (145mm de diametre) en version classique ou lite et un support mural pour voiture 1/8eme en plusieurs taille de roue dispo (100/105/110mm de diametre) viser au mur avec des cheville multi materiaux avec…
I liked the original model, it had details and didn't require printing multiple pieces with very little supports. I found the best way to print was 50% size 75 degree angle (less than 90 degree) with the nose pointing up and using a…
A single-slot cooling solution for the LSI SAS9300-8e HBA by attaching a Delta BSB0512LAA01 blower fan that's readily available on AliExpress and other online platforms. Friction fit. Inspired by LSI SAS9300-8e blower fan bracket . Use a…
TPLink TL-SG608E Multiboard mount
Držák středního diffu na xb8e. Tisknu to na 0,1 PC blend. Závity pro rouby je lépe udělat nahřátým šroubem nebo závitníkem.
10 Einzelteile, zum Ausdruck und danach einzeln verkleben. einmal ein 50 cm Mass (Stern ist 50 cm hoch), bei einer Dicke von 10mmx10mm , zu drucken auf einem 22er Bett, bzw ein 100 cm benötigt ein min. 38 er Bett, dann 20mmx20mm. Man…
Choose your thickness, very strong with with 100% infill !
608er Lagerhalter für 4040-Profil (8 mm Nut) V0.2 - Lagerbock verstärkt Dieser Halter ist für ein 608er Kugellager ausgelegt und lässt sich direkt auf einem 4040 Aluminiumprofil mit 8 mm Nut montieren. Materialempfehlung: PETG (Getestet…
Gridfinity Bin for the Kaiweets Multi meter - Model No HT118A or HT118E Storage for the leads under the meter when not in use Cutout for the leads Stoppers for the stand when the meter needs to placed at an angle Slots to rest the probes…
Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…
This is a clip together holder for four spark plugs, that go into a Honda Recon TRX250. The plugs are marked on the outside, so it's easy to remember what they are and what season they're for. Two are for hot weather use, and two are for…
This thumb screw allows you to insert an M4 nut into the printed part and which will allow you to tighten and loosen the battery hand rather than using a tool.
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Netgear Switch GS308EP from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Decided to re-organize my network hardware by moving (most of) it into a 10 inch rack. After printing the parts for the rack itself (check this fantastic design by McBig ( https://www.printables.com/model/427461-10-inch-server-rack ) and…
Wall Mount for Canon LC-E8E Charger Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 15% Filament: Technology Outlet PLA Black Notes: Printed vertical…
1U 10" adapter to integrate a TP-Link TL-SG608E managed switch into the server rack. I printed it using the 0.20mm, SUNLU - PETG profile without any supports.
Two worklight mounts. One for attachment to the grab handle on a 3038e and one to allow replacement of the original Hella worklight on a 1025R with some other type of worklight. The 3038e mount screw pockets were designed for use with 3mm…
I really liked the wheel CAD Solutions Neumayr made since it looks nice, does not damage the original tires with screws, is functional in that it should have better traction due to the airless tire design and uses the original wheel…
Creator dimas_art has a very good looking TP-Link SG108E holder that I wanted to turn into a multiboard compatible mount. I took his model and remixed it to add two multiboard snaps. I suggest printing in the orientation shown in the…
This model uses : 10x M3 8mm socket head screws 10x M3 nuts
Note d'impression Les pièces nécessitent des supports et doivent être imprimés avec les axes à l'horizontal pour la solidité. La taille des pièces nécessitent une impression en 0.2mm d'épaisseur. Privilégier des supports organiques et une…
Update: The hole size was incorrect, so I corrected it. This is a convenient holder that can be used by simply inserting hex wrench bits or screwdrivers. - 0.5mm thin wall , Fast printing time due to thin walls. -There are 18 bit drivers…
This 2x3 Gridfinity plate can hold 1 Canon LC-E8E (official charger for Canon LP-E8 camera batteries). I built-in an “LC-E8E” label on the plate to make it clear which charger it should hold.
I created a GPS tracker project in GitLab: liligoa7608-gps . I needed a case for a Liligo T-A7608E-H board and here it is. You will need additionally: 6 pieces of M3x35 screws 2 pieces of M3 nuts, those goes into the corners' of the box's…
Ein einsatz damit das alte radio raus kann und das neue Radio zum beispielk Blaupunkt eingesetzt werden kann. Category: Household
If you want to attach your wifi box
In certain conditions the car will be smoother and easier to jump with the rear wing mounted higher. You need to use a longer bolt then the standard to mount the rear wing through the spacer (simply add 10mm). These spacers are a tight…
caja receptro para coche rc 1.8 xray xb82 con esto tenemos solucionado el no tener que poner receptro suelto.la caja le puse dos entradas para variador y otra justo para el servo con lo cual queda muy recogido
Depth 38,2mm, Width: 83,3mm
noch 2 Klingen einer Cutterkline rein geschmolzen und dann los
Very simple Tool / Sehr einfaches Werkzeug Used for / Benutzt für: https://www.printables.com/de/model/199604-prusa-doppel-filament-spulenhalter-double-filament PETG 40% Infill 0.2mm
I re-mixed this to 2/3U and added keystones to the both sides
made on 3 pieces to fit with my Prusa MK 3.5 printer. all printed in PETG, as the working temperature is about 50°C. upper layer to be printed 3 times and glued (I use Epoxy 2 parts quick drying) together. a support is required for 1 edge…
Two versions of a holder for the K-1028E 1k in 1 universal A/C remote control. The wall mount can be attached with command strips or a screw. The desk version is slightly tilted so you can see the time easier. Also includes a “test” file…
Modell besteht aus 2 Bauteilen Clamp for ø38 pool hoses Made of PET-G for connecting and guiding 2 ø38 hoses Model consists of 2 components
Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.
This is a simple wall mount for the XikeStor SKS3200-8E1X-P ethernet switch. This 9-port multi-gigabit switch with POE+ has three M3 tapped holes on either side that are designed to be used with the included rack mount brackets. I've…
Honey carrier 8-pack with wooden emblem, well suited for beekeepers, so 8 jars can be transported safely. little support It's best to reinforce the floor with a height of 10mm using a modifier. I printed the entire floor with 60% infill.…
Estrusore Direct formato dalla fusione di un mk8 ed un e3dv6... ottimo per infilare il filamento alla cieca e per stampare anche il tpu. Compatto e con molta trazione grazie all'uso di un INGRANAGGIO HOBBED da 12 mm (…
