Search results: adapte

Sort order

31,327 models

P
Printablesrorys3D

Power switch adapter - CORE One/+

This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…

Downloads
9,387
Likes
1,645
Rating
4.95
P
PrintablesIts-my-right

Prusa MK3s+ Fan shroud adapted for Mk3s

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
6,778
Likes
294
Rating
4.88
P
Printablessba1

Duplo Brio Adapter Remix

Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…

Downloads
6,497
Likes
528
Rating
4.9
P
PrintablesAndrás Bognár

Minimalist Duplo - Brio, IKEA, Wooden Train adapter

Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,575
Likes
696
Rating
4.96

Prusa mini power adapter holder

This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…

Downloads
5,115
Likes
2,014
Rating
4.91
P
PrintablesjonnieZG

2.5" to 3.5" SSD HDD Bay Adapter - Screwless

Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…

Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,715
Likes
407
Rating
5
P
Printableszobarlp

Disk adapter 3.5" to 2.5"

SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…

Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant

Downloads
4,323
Likes
665
Rating
4.85
P
PrintablesTom Hall

Quest 3 BoboVR M2 Adapter

Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…

Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant

Downloads
3,619
Likes
185
Rating
4.08
P
PrintablesVertigoMakes

Prusa MMU2 PTFE Holder M10 Passthrough Adapter

Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…

Downloads
3,583
Likes
585
Rating
4.98
P
PrintablesMartinD

Sodastream bottle adapter V1 for standard 0,5 liter pet-bottles

For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…

Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,032
Likes
440
Rating
4.95
P
PrintablesMateusz Tokarz

One-Hand Multimeter Probe Tweezer Adapter

BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
2,779
Likes
972
Rating
4.9
P
PrintablesFluffStuff

Polaroid Spectra itype and 600 film pack adapter

Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant

Downloads
2,001
Likes
102
Rating
5
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,995
Likes
158
Rating
4.92
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
Printableswollel

CHAIN LUBE Spray adapter Bicycle/Motorbike

Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
1,899
Likes
237
Rating
4.79
P
PrintablesRNLDNKP

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
1,525
Likes
49
Rating
5
P
PrintablesMartin Brown

Cricut Stabilo pen adapter

Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,478
Likes
129
Rating
4.86
P
Printableszoltanf

Prusament spool to master spool adapter

This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,471
Likes
280
Rating
4.93
P

Universal Parkside Battery Adapter [PAP 20 A1]

A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.

Print approx. €2.88–€3.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,425
Likes
76
Rating
5
P
PrintablesLucas Ribeiro

4010 fan adapter ender 3 v3 se

V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
1,308
Likes
167
Rating
5
P
PrintablesJKM

PrusaCoreOne adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,292
Likes
25
Rating
0
P
PrintablesJKM

Smart Holder adapter for Skoda

Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…

Print approx. €3.90–€4.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,195
Likes
37
Rating
5
P
Printablessblomfield

4" DWV to 4" Flexible Dust Collection Hose Adapter

This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…

Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,120
Likes
136
Rating
5
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
109
Rating
5
P
Printablesfabilandwehr

QuadLock Phone Mount Adapter

01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,081
Likes
113
Rating
5
P
PrintablesJurriaan

45 RPM record (phono) adapter

Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
1,055
Likes
69
Rating
4.89
P
PrintablesJKM

PrusaXL adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,038
Likes
13
Rating
0
P
PrintablesJKM

Smart Holder adapter for Skoda only MultiPrint!!

Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…

Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,001
Likes
26
Rating
0
P
PrintablesSorcier

Rack adapter for TP-Link Omada devices

This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…

Print approx. €3.18–€3.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
930
Likes
63
Rating
4.86
P
Printablesscubam@xx

PC4-M10 to PC4-M6 Adapter

This small adapter is a quick solution to use PC4-M6 fittings instead of PC4-M10 fittings. I printed them in PLA because PETG is unfortunately too soft and you can screw them into the M10 thread with an 11mm wrench. Print Settings Rafts:…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
847
Likes
103
Rating
4.83
P
Printablesjohn3volts3

USB to Dupont adapter for power supply 5V Arduino Raspberry Pi (Remix)

A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
833
Likes
273
Rating
4.71

RGBtoHDMI adapter housing for Amiga 500

This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant

Downloads
832
Likes
36
Rating
5
P
PrintablesDavidGray

MMU3 PC4 M10 Adapter

PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.

Print approx. €1.34–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
829
Likes
145
Rating
4.92

Danfoss RA-N to M30x1.5 Radiator Adapter

Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…

Print approx. €0.18–€0.21 excl. taxPreliminary estimate for one variant

Downloads
820
Likes
44
Rating
4.88
P
PrintablesITF

OpenRC F1 Car 1:10 Standard Wheel Adapters

Standard 1:10 RC car wheel adapters. Print instructions 3D printed tires weren't cutting it for us on our OpenRC F1 cars. I made these adapters so we could mount cheap, standard 1:10 RC street tires and wheels on them. We've only just…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
791
Likes
97
Rating
5
P
Printablesmartingeyer89

High Pressure Pump Adapter and Gasket for Fanatic SUP

I was looking for an adapter to try and connect my Makita DMP180 cordless inflator (that fits on standard car tire valves) to the socket of my wifes Fanatic SUP. The adapters I found here on Printables.com unfortunately did not seem to…

Downloads
775
Likes
69
Rating
5
P
PrintablesArnoud Hubach

Starlink Ethernet Adapter Wall Mount

This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…

Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant

Downloads
773
Likes
88
Rating
5
P
PrintablesPhysics Dude

Macro lens adapters for Nikon F-mount

Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
709
Likes
116
Rating
4.9
P
PrintablesDani Dück

Adapter für Bosch Smart Grip im Hochformat

Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant

Downloads
708
Likes
31
Rating
0
P
PrintablesHotWiL

Adapter for the original prusa spool holder. (For enclosure mod)

I created this adapter to still use the original prusa spool holder with my enclosure.

Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
689
Likes
189
Rating
4.76
P
PrintablesOlivier Boesch

Microphone adapter from 3/8" to 5/8"

A simple standard microphone stand adapter from 3/8" to 5/8". Made with fusion360.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
688
Likes
40
Rating
5
P
PrintablesJan

Ender 3 v2 Neo Spool Holder Adapter for Direct Drive

I was looking for an adapter that rotates the spool holder 90 degrees for DD extruder but I could not find any. All others models were for Ender 3 V2 which has a V-slot in front of the top extrusion which Neo does not have. This one uses…

Downloads
628
Likes
95
Rating
5
P
PrintablesJobOx

Adapter 2kg Spool Holder (MK3/MK4)

With this adapter you will be able using your default Prusa spool holder for 2kg spools (of 30cm diameter). Simple click system. No tools needed. Can be printed with PLA without support. Brim recommended. Please pay attention to the…

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
627
Likes
61
Rating
5
P
PrintablesMalmer

140mm Fan to 100mm Duct Adapter

140mm Fan to 100mm Duct Adapter A simple, no-supports adapter that connects a standard 140mm fan to 100mm (4") ducting. Great for fume extraction, workshop ventilation, and general airflow projects. 🔧 What it's for Soldering / 3D printing…

Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
604
Likes
73
Rating
5

2-Liter Soda Bottle To 0.25-Inch ID Tube Adapters

I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…

Print approx. €7.15–€8.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
574
Likes
118
Rating
5

Mason Jar Watering Spike Adapter

I made this model to utilize spare mason jars around the house. The watering spike keeps the water coming out at a slow enough pace to where you can set, forget, and not have to worry about watering your indoor plants for a *period of…

Print approx. €6.33–€7.74 excl. taxPreliminary estimate for one variant

Downloads
560
Likes
339
Rating
5
P
PrintablesInverseInductor

ResMed AirSense 10 CPAP to 3M bayonet filter adapter

2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
557
Likes
105
Rating
5
P
PrintablesJPMakesStuff

40v side-by-side adapter compatible with Ryobi 18v

Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
543
Likes
113
Rating
5
P
PrintablesFloKun

TP-Link ER605 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…

Downloads
536
Likes
61
Rating
4
P
PrintablesFilip Honzárek

Makita Vacuum Cleaner Adapters incl. Festool

Adapters for Makita Vacuum Cleaner for different tools. If you need other sizes, just contact me I can make it. Look to drawing for expected values. Maybe it's fit to other vacuum cleaners too. Let me know. Adapters for these tools:…

Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant

Downloads
528
Likes
79
Rating
5
P
Printablesgwendal

pj7000 festool adapter

Makita PJ7000 to Festool 27mm CLEANTEC hose connector. Replace existing hose connector.

Print approx. €4.24–€5.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
496
Likes
76
Rating
5
P
PrintablesKela

Skadis to Kallax Adapter REMIX

print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
480
Likes
100
Rating
5
P
Printablessecv

2.5" SSD to 3.5" SATA Bay Adapter

Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files! Tip Via Stripe Tip Via PayPal A hard drive bay…

Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant

Downloads
447
Likes
58
Rating
4.75
P
Printablescybrwshl

osVAC Adapter M32 Festool

This is an osVAC adapter for festool "Tauchsäge TS 55". It may fit all other festool tools as well. For more information about osVAC see here: https://www.thingiverse.com/hobbyhimmel/collections/osvac-adapter Print Settings Printer Brand:…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
443
Likes
41
Rating
4.5
P
Printabless0

Starlink Dishy v2 Winegard (1.5inch) bushing adapter

There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
436
Likes
34
Rating
5
P
Printablessspico

Adapter for front speakers BMW E46 3er series Compact fits 165 mm speaker

Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…

Print approx. €8.66–€10.59 excl. taxPreliminary estimate for one variant

Downloads
436
Likes
56
Rating
5
P
PrintablesVojtaCe

Backpack Strap Quadlock Adapter

No pockets? No worries! If you like wearing leggins (or other clothes), you might find the absence of pockets rather frustrating. Do you own a quadlock phone case? This backpack (anything) strap adapter can hold your quadlock equipped…

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
435
Likes
219
Rating
5
P

AA to D battery adapter

4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
423
Likes
69
Rating
4.5
P
PrintablesJoshyu

Karcher vacuum hose adapter

These prints work as fully functional adapters for the Karcher VC-3 and similar. Fit is perfect for my printer even the snap-fit but as usual, your results may vary. Fusion360 file is included for easy modification. It's meant to…

Print approx. €3.68–€4.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
420
Likes
41
Rating
4.8
P
Printablesdrhollen

ZWO EAF adapter for Samyang 135mm lens

This is an adapter system to mount a ZWO EAF electronic automatic focuser to a Samyang 135mm f/2.0 ED UMC lens for astrophotography. This is similar to other popular EAF mounts for William Optics Redcat 51 telescopes, but specifically…

Downloads
410
Likes
36
Rating
5
P
PrintablesSimple3D

Makerpipe Telescoping EMT Adapters

Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…

Print approx. €1.93–€2.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
399
Likes
95
Rating
4.5
P
PrintablesCoudbol

BMW E34 Front speakers 165mm adapter

I designed this model in order to adapt the original front speakers from an BMW E34 that are 130mm (144mm between screws) and fit bigger 165mm speakers from Hertz I will use inserts in order to fix the 165mm speakers but Hex Bolt can also…

Print approx. €2.36–€2.88 excl. taxPreliminary estimate for one variant

Downloads
392
Likes
30
Rating
0
P
PrintablesMadEdd

Lens adapter Pentax K to Fujifilm X

WORK IN PROGRESS: I am still finetuning this design. PK-FX#2v10 is final… for now. I made an adapter to use my old Pentax 50mm lens on my brandnew Fujifilm X-S20. The lens will be fully manual of course, just like in the old days…. ;-)…

Print approx. €5.73–€7.01 excl. taxPreliminary estimate for one variant

Downloads
387
Likes
27
Rating
0
P
PrintablesBlackBird11

Original Prusa MK3S+/MK4S Spool Holder Adapter for IKEA Lack Enclosure

I wanted to use the original Prusa spool holder with my IKEA enclosure because the original holder has minimal resistance, making it ideal for smooth filament feeding. Previously, I had printed a different spool holder, which functioned…

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
386
Likes
80
Rating
5
P
PrintablesSpeedy

Wheel center cap adapter VW Golf

Wheel center cover adapter for a Golf 7. If you have any problems or suggestions for improvement then please let me know :) I would be very happy about any feedback :)

Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant

Downloads
381
Likes
47
Rating
5
P
Printablesstixpjr

Laundry washing machine and dryer drain hose adapter/joiner

Pipe fitting adapter/joiner for the drain hoses of a washing machine and condenser-dryer. As printed it fits my Bosch washer and Haier dryer perfectly. The model is parametric, so should be adjustable for other sizes. As uploaded, fits a…

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
381
Likes
41
Rating
5
P
PrintablesAdam

Sewing Machine Cone Spool Adapter

This is an adapter to use larger cone spools with a (standard?) 0.25" diameter sewing machine spool holder. It features a tapered conical shape to match the spool, and a larger base so that the adapter doesn't ride up or get stuck during…

Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant

Downloads
367
Likes
77
Rating
5
P
PrintablesMike

Bike bottle cage adapter

Bike bottle cage/holder adapter to lower/raise cage mount. Use m5*12 screw, longer screw can damage your bike frame , always first try to install cage to adapter and see if screw does not stick out. Cage mounting holes are 64mm apart…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
354
Likes
30
Rating
0
P
PrintablesBilld

Dyson V6 Vacuum to V8 Accessory Adapter

An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…

Print approx. €4.40–€5.37 excl. taxPreliminary estimate for one variant

Downloads
337
Likes
27
Rating
5
P
PrintablesCMPDesign

Adapter for Prusa spool holder, for the Original Prusa Enclosure

This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
329
Likes
80
Rating
4.91
P
Printablesbeerwema

Trimmer to potentiometer adapter/Trimmer with turning knob

Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
32
Rating
5
P
PrintablesTache

CAMLOCK Adapter for RIDGID Hose (OD 43.50 mm)

This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…

Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
66
Rating
5
P
PrintablesVictor Tobies

Cricut Posca Adapter PC-1M

Pretty basic adapter to fit Posca pens in the cricut pen holders.

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant

Downloads
316
Likes
57
Rating
0
P
PrintablesPGold

Adapter Reducer between 1" to 1/2" NPT threaded pipes

Printed using ePLA. use support as already planned in the attached bgcode file or use your own.

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
310
Likes
41
Rating
0
P
Printablesrj_ruin

Icom HM-207 microphone clip adapter

I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
308
Likes
14
Rating
0
P
PrintablesMetamere

Ben's Better Dropper Post Seat Bag Adapters (26.4, 22, and 22 tall)

I designed this specifically for a 26.4 mm diameter stanchion dropper post for 1" straps, and later added a version for a 22 mm stanchion dropper post, both for 1" and 2" straps based on the requests of others. I had earlier purchased a…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
307
Likes
55
Rating
4.75
P
Printablesoltas

Adapter Slinshot Pumpe Duotone Wing

Allows for switching between slingshot and duotone wing and use the slingshot pump for both.

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
306
Likes
24
Rating
5
P
PrintablesTheGrantz3D

Palette 2 Tube Adapter for Prusa i3MK3/S

This is my version based on the one by mmontminy here on this site. https://www.prusaprinters.org/prints/3556-mk25s-mk3s-palette-2-extruder-clip This version has a similar slide clip system that mmontminy uses but it screws directly to…

Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
19
Rating
5
P
PrintablesBent Derailleur

45 Record Adapter Shimano HG Freehub Body

If you can't get out biking and are stuck indoors. Maybe play some old vinyl 45's to get in mood. Freehub body is actually almost perfect replica in size, only change I made to dimensions was base which is slightly wider and thicker.

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
297
Likes
31
Rating
5
P
Printablesthejevans

Sony E-Mount to Mamiya Press System adapter

Made using my parametric camera lens connectors . I've tested this design with the 50mm f/6.3 and 250mm f/5 lenses. The taper in the design is 45 degrees, so you should be able to print with minimal supports with the Mamiya Press side…

Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant

Downloads
295
Likes
49
Rating
0
P
Printablesnetpaq

Pool Skimmer Net Adapter for Gardena Combisystem

I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
295
Likes
21
Rating
5
P
Printableskilar p

Adapter for attaching the worktop to the Qbricksystem PRO box

Tištěno z PETG trysky 0,4mm vrstva 0,2mm, 4 stěny, náplň 20%. V úzkém místě, kde jsou otvory pro zoubky klik z krabice, je dobré pomocí modifikátoru nastavit 100% vypnutí. @S adaptérem je třeba vytisknout 2 vložky pro umístění na krabici…

Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
287
Likes
49
Rating
5
P
PrintablesPatrice_C

45 RPM vinyl adapter - Adaptateur 45 tours -V2

Hi , Here is an adapter for 45rpm in case of breakage or more likely loss. The part is printed upside down and the number of outlines will define the appearance of the surface. ---- Salut, Voici un adapteur pour 45 tours en cas de casse…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
282
Likes
19
Rating
5
P
Printablesarmer_geddon

VESA 100x100 Adapter MSI Optix MAG341CQ

Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…

Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
10
Rating
0
P
PrintablesAbdagon

SP-Connect GoPro Adapter

This handy adapter let you use the SP-Connect sleeves with all kinds of GoPro accessories.

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
270
Likes
30
Rating
5
P
PrintablesBDizzle

Harbor Freight 2HP Dust Collection 4" Hose Adapter

This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…

Print approx. €5.39–€6.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
263
Likes
57
Rating
5
P
Printablesstritti

MSpa Urban Surora Sandfilter Adapter

Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
250
Likes
18
Rating
0
P
Printableszuberio

Ridgid Trim Router Vacuum Hose Adapter

Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
41
Rating
4
P
Printablestomasmcz

Camera Lens Filter Step-up Adapter M49 to M58 (or M67)

This is a simple adapter to use M58 (or M67) filters on camera lenses with M49 filter thread. It should be possible to print it without supports. I found that it screws more smoothly when printed with 0.1 mm layer height, but 0.2 layer…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
243
Likes
22
Rating
5
P
Printablesdtoux

Dust port adapter for Kreg track saw to Rigid 1-7/8 vac

I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…

Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
32
Rating
5
P
PrintablesCed

Glitter Gel pen adapter Cricut JOY to Maker 3

Hello, I propose a clamp for the GLITTER GEL CRICUT JOY pen to be mounted on your CRICUT MAKER 3. To be printed without support with a raft. Good print !

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
241
Likes
37
Rating
5
P
PrintablesGuinuf

MK4 Reverse Bowden Adapter to attaches a PC4-M6

This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
238
Likes
31
Rating
4.86
P
PrintablesAbdagon

SP-Connect Tripod Adapter

A small adapter to attach a phone with an SP-Connect case to a Gorillapod (Tripod) which uses a 1/4 inch screw as standard.

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
237
Likes
19
Rating
5
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
45
Rating
5
P
PrintablesAllpa

Rail-Adapter for Milwaukee M18 FMCS metal circular saw / Schienen-Adapter für Milwaukee M18 FMCS Metallkreissäge

I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…

Downloads
231
Likes
53
Rating
5
P
Printablesreviloc

1/2 inch to 13mm barbed adapter

½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
230
Likes
28
Rating
5
P
PrintablesSzymon

Laser Engraver Mecpow X3 Pro Honeycomb H44 Adapter

Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…

Print approx. €3.59–€4.39 excl. taxPreliminary estimate for one variant

Downloads
224
Likes
20
Rating
5
P
PrintablesJannik Fritz

Pool Adapter 38mm zu 32mm

Ich habe einen schnellen Adapter konstruiert. Diese funktioniert gedruckt habe ich ihn aus 'PETG stützstrukturen sind keine nötig Aus PLA kann man ihn natürlich auch drucken. Aber PETG ist widerstandsfähiger

Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
222
Likes
11
Rating
5
P
PrintablesDominik

Moes Zigbee Thermostat (TRV) Adapter

Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
220
Likes
19
Rating
5
P
PrintablesMattelec

Honda Ruckus/Zoomer LED Headlight Adapter

The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…

Print approx. €4.49–€5.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
218
Likes
15
Rating
5