4,689 models
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Egyptian Pharaoh Skull Fix of : https://sketchfab.com/3d-models/pharaoh-of-the-afterlife-2c44e56201da4f45ac9bcb8a354f6182
Print approx. €17.99–€21.99 excl. taxPreliminary estimate for one variant
This is not a difficult print. The picture shows Ankermake PLA+ Matte Grey filament. I used 30% gyroid infill and my regular print settings.
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for PETGSource material: PET
The UV-5R Radio is a fun item to have around… but it always seems to be falling over. This stand will help keep it upright and stable. The pocket has ribs that engage the battery slots nicely to hold it snugly. You can use 2-sided tape if…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
The STL file only contains one piece, which you need to print twice. The octahedral chamber inside has 6 vertices, and so causes the ball only to land on one of 6 “sides” when a weight/ball bearing is added inside! If you want, you can…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Sun Pharaoh : Plants vs Zombies
Print approx. €14.09–€17.23 excl. taxPreliminary estimate for one variant
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I created this because I couldn't find a simple wall mount for my Xiaomi Oclean X toothbrush. After printing stick a double-faced adhesive tape (I used 3m tape) at the back and put it to the wall where you want it to be. Snaps to the…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of an aortic arch that can be used in medical education to practice catheter configuration in angiography. The model is so long that it has been divided into two parts. Both parts have to be divided by cutting and printed…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for one variant
I remixed this from the following models: https://www.thingiverse.com/thing:4251451 - strap https://www.thingiverse.com/thing:2674461 - 8 bit Pac Man https://www.thingiverse.com/thing:2659699 - 8 bit ghost Swap filament of different…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Human ankle with complex fracture, AO classifiacation 44B3.2 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €8.72–€10.66 excl. taxPreliminary estimate for one variant
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Azure Floral Qipao
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for one variant
The 3D model is a custom housing designed specifically for the Xiaomi Mi Temperature and Humidity Monitor 2. This model was created to provide a solution for those who may have encountered the issue of their original housing melting or…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
🇯🇵 Welcome to Northern Japan! This is a simple map model, based on existing files shared by the Geospatial Information Authority of Japan . The source are maps of Hokkaido and Aomori prefectures in .OBJ format, high file weight and voxel…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Voici un porte bobine de wanhao rallongé pour les bobine de prusamment.
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
Introducing our 3D-printed motorcycle-themed cup coasters! 🏍🔥 Each set comes with a matching holder for easy storage. Made with precision and durability in mind, these coasters protect your surfaces while showcasing your passion for…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Model náhradního pantu pro box prachu.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Human ankle with complex fracture, AO classifiacation 4F3 + 43C3 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
The original battery cover for these headphones has a weak hinge that broke. This battery cover does not utilize a hinge as it “snaps” into place. It was printed on edge so that the printed layers went through the spring catch versus…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
This model is made to fit one ring in the middle of the crown, and/or multiple rings on the points of the crown. If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Outdor camera holder Xiaomi CW300 for a pole or tree with a diameter of 12 cm, for an outdoor socket box fastening using 16 mm stainless steel straps and clips
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
The case for the Xiaomi Aqara thermo and humidity sensor to hang in my greenhouse. Obal na zaveseni Aquara cidla teploty, tlaku a vlhkosti do skleniku.
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
I need portable UV Box on my car, to sterilized belongings like bags or groceries from supermarket (it's about pandemic things), so i bought mini USB wireless XIAOMI XIAODA UVC lamp for do the task. But i figure out that the lamp was so…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Stops objects, such as padlocks and neon lights with the Juventus logo. Two attachments with the Juventus logo highlighted or hidden
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
This design aims to convert a quite fancy AOC monitor stand into a tablet and phone stand . Shown on pictures are Galaxy Tab S7 (11") and Galaxy Tab A7 (10.4"). The mounting plate snaps-in onto the stand, making it easily removable.…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Diese Halterung habe ich entworfen um den Bluetooth-Fenstersensor von Xiaomi versteckt im Fenster einbauen zu können und um bei einem Batteriewechsel nicht jedesmal den Kleber (am Fenster/Sensor) abzureissen und neu zu…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Updated wall Xiaomi motion detector wall mount that has a slot to make battery changes easier. If there's a sticker on the bottom of the mount, you'll need to remove it to make it fit properly. Like the original, this was designed for use…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
This is a parametric rugged box adapted to house five Seeed Studio XIAO ESP32-C5 boards. The setup consists of: 1 XIAO ESP32-C5 used as the controller 4 XIAO ESP32-C5 boards used as nodes A power bank used to power the complete setup The…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Small 25mm x 25mm x 5mm ball stand to keep decorative balls from rolling around. Initially this stand was created for ~50mm diameter decorative stone balls. Printed with PLA and 0.15 Structural Core One default settings. Layer height:…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Meet your new little steamed friend! This adorable bao bun dumpling is designed with a soft, rounded shape and a charming expression that gives it plenty of personality despite its simple design. Whether it's sitting on your desk, shelf,…
This model was created by Amao chan over on thingyverse. Check out the original creator: https://www.thingiverse.com/amaochan or the original post: https://www.thingiverse.com/thing:6086143 This is just a reupload!
I recomend glue on Bed for Flex and PETG. It helps alot!
Multicolour keychain remix of the Blades of Chaos by Thinkibot on Thingiverse The 3mf is compatible with Bambu Studio. There's a bloody and non-bloody version inside the 3mf. Filaments used: eSUN PLA+: Fire Engine Red, Black eSUN silk…
Painted by Sarah Wade These swords are replicas of the sword wielded by Kratos from god of war. They print in 7 part and has a hole for a 5mm rod to help them align and makes the swords strong. All the detail, like the cracks is actual…
Updated 28th August 2024, current list of bases: 25mm round 25mm slotted round 25mm hex-hole round (Skaventide box) 32mm round 32mm hex-hole round (Skaventide box) 40mm round 50mm round 60mm round 60x35mm oval 75x42mm oval 105x70mm oval…
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic - Support from build plate only Seam: Rear/Back If you like my work consider Buy me a coffee 😊 Check ou my other cute keychain
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Baofeng UV-5R case ---------------------------------- This is a case for the Baofeng UV-5R which prevents from accidental buttons interaction while radio is in your pocket or a pouch. However all functionalities stay accessible to a more…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
Side buttons protection cage for Baofeng UV-5R radio Allows you to avoid inadvertent push (bag, pocket, ...) Cage de protection des boutons latéraux pour radio Baofeng UV-5R Permet d'éviter des appuis par inadvertance (sac, poche, …)
This is designed to guard against accidental button presses or knob knobbings. Mounts using the existing belt clip hold on the back and keeps the ability to mount the belt clip over top. Retains access to all functions and buttons of the…
General This gives Lucky 13 the power of the God of War. Since there is a chain attached at the end of the blades, you assemble the pieces a little bit on Lucky 13's hands. It's simple enough to slide the blade on the top of the hand, and…
inporved design for a phone case for xiaomi redmi note 11.
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Dai un tocco di classe alla tua scrivania con questo supporto per occhiali dalle linee fluide e artistiche. Non è solo un oggetto funzionale, ma un vero elemento d'arredo che richiama un profilo umano stilizzato. Mai più occhiali…
Seeed Xiao BLE snap fit case with reset button, designed to be used as a dongle/central device for ZMK Firmware. Updates 06/01/26 - removed unnecessary features, small tweaks; added step files 10/12/24 - added ejecto 🚀 hole for easier…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) No supports needed Scale it as you like :)
A simple tabletop stand for your Xiaomi Mijia thermometer 🙂 Printed in Hatchbox PETG (No supports required)
Profils téléchargeable, à dézipper avant d'importer dans cura Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy Print in place ! The Ultimate Fidget Avocado keychain
Xiaomi Redmi Note 12 case with differents models
Extends the profile of the AOOSTAR R1 and R7 2-bay NAS PCs to add a 120mm fan. I split off the CPU fan header (with a standard PWM fan splitter) as the chassis header doesn't support PWM and outputs 12v continuously. Screws into the…
Modelo de Desdentao de como entrenar a tu dragon, Completamente imprimible Recomendado nozzle 0,4 o 0,2 soportes si :)
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
** Find more of my models here: https://amatzakos.com/store/ ** If you have a successful print or if you paint the miniature please let me know in the comments. Also you can tag me on Instagram @nyxprints 32mm and 75mm scale. Models…
Es Espada de Kirito del anime Sword Art Online, modelo completo de la espada para imprimir por partes Primero se recomienda imprimir todas las piezas y luego ensambrar usando los conectores, se puede agrepar pegamento para que las piezas…
23/02/2022 : Mise en ligne 02/03/2022 : V2 Optimisation refroidissement Voici mon Profil PrusaSlicer pour imprimer en dual color avec la Wanhao D12 d'origine ce profil peut être amené à évoluer si j'affine mes réglages au cours du temps.…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
Угловое крепление к стене для камеры Xiaomi Mi Home Security Camera 360 Category: Camera
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
I have printed and installed this mods on my bao but no field tested yet Supports needed for guard part.
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
This model is remixed from https://www.thingiverse.com/thing:5270394 This is a small portable USB-C charger for the BaoFeng UV-5R and similar models that take the same BL-5 battery. I've tested this on the UV-5R and UV-5G. Note that…
I created a Hot Wheels 1:64 scale car lift after I was not able to find anything that suited my requirements. This has adjustable arms via an M50 x 50mm screw and a square nut inserted into the back of each arm. I added markers to front…
I needed a support for the new Mibox S (which is a bit slimmer than the previous version), so I modified NirDobovizki's design ( https://www.thingiverse.com/thing:2754331 ). Print instructions Category: Organization Summary I needed a…
The Xiaomi 13T already comes with a clear bumper case out of the box, but I wanted to give it a more personal touch. So, I designed this custom case. The case can be printed from TPU with a Shore hardness of 95A or more. The frame around…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
PLA 0,15 oder 0,20 10% Infill Glue Thanks for downloading in advance and please don't forget to like this modell! https://www.printables.com/de/model/498913-genshin-hu-taoboo-tao-hat
This is a lid of a Xiaomi Mi TV Stick's remote. On mine the little nozzle on the front broke off so i had to make this for me. Print it standing up on the flat tilted back part to get the best results. (Lay this flat part on the printbed)…
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
Because I couldn't find any stl file for a phonecase for this phone I disigned my own. It is not perfect but it works.
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
A functional model of the extraocular muscles of the human eye. Anatomically accurate insertion angles result in realistic pulling actions of the muscles. Developed to aid in the teaching and learning of the extraocular muscles. Printing…
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
Quote from the artist Amao Chan When the film spreads through the webs, it shows that a plastic straw pulled out from the poor turtle's nostrils, which used its misfortune to slightly change the world. Many people have begun to take the…
So I made some changes to the original model. I modeled new antennas, a new trunk, I also modified the head, body and abdomen so that there are 2 colors. I have reduced the thickness of the wings by half so that they are lighter and allow…
3D printed accessories for AOS 5 and 5.5 V2 FPV quadcopter frames. More info: https://www.aos-rc.com/ Designed to be printed in TPU for flexibility and protection. Minimum 2 perimeters/walls and 5/4 top/bottom layers, infill 20% up. These…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
Holder for Xiaomi Wiha screwdriver set to attach to Ikea Skadis pegboard
(Description from original author) WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the…
The battery latch of one of my Bafeng UV5R broke. I looked on the internet for a 3d printed replacement, I only found a solution on Youtube, but the printed latch was far from functional. Therefore I designed a new one in order to better…
I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle. All you need is the two printed components and 2 wood 3x16mm screws. Note: the lock has 4 holes in…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
Here is my Baofeng UV-5R button and volume cover! I designed it with two flat faces for using your favorite slicer to add your name, group, and/or call sign. Two designs, one for the factory antenna and one with a 21mm diameter opening…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
EN Project under construction . The basic idea behind this printer is the template from MAQUINA with the PrusaBox project. I took that up and made the ChaosBox out of it. Everything he had drawn was made printable and public. The whole…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
